Find research datasets worth reusing

VOYAGER 2 SATURN MAGNETOMETER RESAMPLED DATA 48.0 SEC

This data set includes Voyager 2 Saturn encounter magnetometer data that have been resampled at a 48.0 second sample rate. The data set is composed of 6 columns: 1) ctime - this column contains the data acquisition time. The time is always output in the ISO standard spacecraft event time format (yyyy-mm-dd-Thh:mm:ss.sss) but is stored internally in Cline time which is measured in seconds after 00:00:00.000 Jan 01, 1966, 2) br - this column contains the radial component of the magnetic field, 3) bphi - this column contains the phi component of the magnetic field, 4) btheta - this column contains the theta component of the magnetic field, 5) bmag - this column contains the magnitude of the magnetic field, 6) flag - a flag value that indicates either software error or spacecraft hardware interference reduced confidence in this record (flag value of 1 is bad , 0 is good or unchecked). All magnetic field observations are measured in nanoTeslas. The coordinate system for this dataset is Minus Saturn Longitude System (-SLS). All of the magnetic field data are calibrated (see the instrument calibration description for more details). The SLS coordinate system is defined in Desch and Kaiser, 1981 and the reference documents for this dataset are: Ness et al, 1982 Acuna,Connerney,and Ness, 1983 Connerney,Acuna,and Ness, 1983 Behannon,Lepping,and Ness, 1983

Voyager 1 48-s Triaxial Fluxgate Magnetometer (MAG) Magnetic Field Data in CDF Format

This data set includes the Voyager spacecraft number (1 or 2), the date-time in decimal year (90.00000 is day 1 of 1990), the magnetic field strength, F1, computed from high-resolution magnitudes, the elevation and azimuth angles (degrees) in heliographic (RTN) coordinates, and the magnetic field strength, F2, computed from hour averages of the components. The vector components of B can be computed from F2 and the two angles. The elevation angle is the latitude angle above or below the solar equatorial plane, and the azimuth angle is in the direction of orbital motion around the Sun from the projection of the Sun-to-spacecraft axis into the solar equatorial plane. The Voyager MAG experiment and coordinates are further described in the following publication: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Science Reviews, 21 (3), 235-257, 1977. At the time of experiment proposal, it was expected that the required accuracy of the measurements would be 0.1 nT, determined by the combined noise of the sensors and the spacecraft field. The spacecraft magnetic field at the outboard magnetic field sensor, referred to as the primary unit, was expected to be 0.2 nT and highly variable, consistent with current estimates. Hence, the dual magnetometer design (Ness et al., 1971, 1973; Behannon et al. 1977) was adopted. At distances > 40 AU, the heliospheric magnetic fields are generally much weaker than 0.4 nT; the average magnetic field strength near 40 AU and 85 AU is about 0.15 nT and 0.05 nT, respectively. The use of roll calibrations lasting about 6 hours permits determination of the effective zero levels for the two independent magnetic axes that are perpendicular to the roll axis (which is nearly parallel to the radial vector to the Sun) at intervals of about 3 months. There is no roll calibration for the third magnetic axis. Comparison of the two derived magnetic vectors from the two magnetometers permits validation of the primary magnetometer data with an accuracy of 0.02 to 0.05 nT. A discussion of the uncertainties that must be considered when using these data is given in the Appendix of Burlaga et al. (1994) and in Appendix A of Burlaga et al. (2002). References: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Science Reviews, 21 (3), 235-257, 1977. Burlaga, L.F., Merged interaction regions and large-scale magnetic field fluctuations during 1991 - Voyager-2 observations, J. Geophys. Res., 99 (A10), 19341-19350, 1994. Burlaga, L.F., N.F. Ness, Y.-M. Wang, and N.R. Sheeley Jr., Heliospheric magnetic field strength and polarity from 1 to 81 AU during the ascending phase of solar cycle 23, J. Geophys. Res., 107 (A11), 1410, 2002. Ness, N., K.W. Behannon, R. Lepping, and K.H. Schatten, J. Geophys. Res., 76, 3564, 1971. Ness et al., 1973. Coordinate Systems: Interplanetary magnetic field studies make use of two important coordinate systems, the Heliographic Inertial (HGI) coordinate system and the Heliographic (HG) coordinate system. The HGI coordinate system is use to define the spacecraft's position. The HGI system is defined with its origin at the Sun. There are three orthogonal axes, X(HGI), Y(HGI), and Z(HGI). The Z(HGI) axis points northward along the Sun's spin axis. The X(HGI)-Y(HGI) plane lays in the solar equatorial plane. The intersection of the solar equatorial plane with the ecliptic plane defines a line, the longitude of the ascending node, which is taken to be the X(HGI) axis. The X(HGI) axis drifts slowly with time, approximately one degree per 72 years. Magnetic field orientation is defined in relation to the spacecraft. Drawing a line from the Sun's center, the HGI origin, to the spacecraft defines the X axis of the HG coordinate system. The HG coordinate system is defined with its origin centered at the spacecraft. Three orthogonal axes are defined, X(HG), Y(HG), and Z(HG). The X(HG) axis points radially away from the Sun and the Y(HG) axis is parallel to the solar equatorial plane and therefore parallel to the X(HGI)-Y(HGI) plane too. The Z(HG) axis is chosen to complete the orthonormal triad. An excellent reference guide with diagrams explaining the HGI and HG systems may be found in L. F. Burlaga, MHD Processes in the Outer Heliosphere, Space and Science Reviews, 39, 255-316. Support data calib_flag_on, calib_flag_MF, and calib_flag_offset are added to file version 2. Variable calib_flag_on consists of points where bit 4 or 5 in variable magStatus equal 1. Variable calib_flag_MF represents observations where magnetometer was in cailbration mode. Variable calib_flag_offset represent delay between data points when the magnetometer was in calibration mode and data points where magStatus variable indicated calibration periods. Due to specific shape of magnetometer data profile variable calibration_flag_

Voyager 2 9.6-s Averaged Triaxial Fluxgate Magnetometer (MAG) Interplanetary Magnetic Field in CDF Format

This data set includes the Voyager spacecraft number (1 or 2), the date-time in decimal year (90.00000 is day 1 of 1990), the magnetic field strength, F1, computed from high-resolution magnitudes, the elevation and azimuth angles in heliographic (RTN) coordinates, and the magnetic field strength, F2, computed from 1-hr averages of the components. The vector components of B can be computed from F2 and the two angles. The elevation angle is the latitude angle above or below the solar equatorial plane, and the azimuth angle is in the direction orbital motion around the Sun from the projection of the Sun-to-spacecraft axis into the solar equatorial plane. The Voyager MAG experiment and coordinates are further described in the following publication: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Sci. Rev., 21 (3), 235-257, 1977. At the time of experiment proposal, it was expected that the required accuracy of the measurements would be 0.1 nT, determined by the combined noise of the sensors and the spacecraft field. The spacecraft magnetic field at the outboard magnetic field sensor, referred to as the primary unit, was expected to be 0.2 nT and highly variable, consistent with current estimates. Hence, the dual magnetometer design (Ness et al., 1971, 1973; Behannon et al., 1977). At distances > 40 AU, the heliospheric magnetic fields are generally much weaker than 0.4 nT; the average magnetic field strength near 40 AU and 85 AU is about 0.15 nT and 0.05 nT, respectively. The use of roll calibrations lasting about 6 hours permits determination of the effective zero levels for the two independent magnetic axes that are perpendicular to the roll axis, which is nearly parallel to the radius vector to the Sun, at intervals of about 3 months. There is no roll calibration for the third magnetic axis. Comparison of the two derived magnetic vectors from the two magnetometers permits validation of the primary magnetometer data with an accuracy of 0.02 to 0.05 nT. A discussion of the uncertainties that must be considered when using these data is given in the Appendix of Burlaga et al. (1994) and in Appendix A of Burlaga et al. (2002). References: Behannon, K.W., M.H. Acuna, L.F. Burlaga, R.P. Lepping, N.F. Ness, and F.M. Neubauer, Magnetic-Field Experiment for Voyager-1 and Voyager-2, Space Science Reviews, 21 (3), 235-257, 1977. Burlaga, L.F., Merged interaction regions and large-scale magnetic field fluctuations during 1991 - Voyager-2 observations, J. Geophys. Res., 99 (A10), 19341-19350, 1994. Burlaga, L.F., N.F. Ness, Y.-M. Wang, and N.R. Sheeley, Jr., Heliospheric magnetic field strength and polarity from 1 to 81 AU during the ascending phase of solar cycle 23, J. Geophys. Res., 107 (A11), 1410, 2002. Ness, N., K.W. Behannon, R. Lepping, and K.H. Schatten, J. Geophys. Res., 76, 3564, 1971. Ness et al., 1973. Coordinate Systems: Interplanetary magnetic field studies make use of two important coordinate systems, the Heliographic Inertial (HGI) coordinate system and the Heliographic (HG) coordinate system. The HGI coordinate system is used to define the spacecraft's position. The HGI system is defined with its origin at the Sun. There are three orthogonal axes, X(HGI), Y(HGI), and Z(HGI). The Z(HGI) axis points northward along the Sun's spin axis. The X(HGI)-Y(HGI) plane lays in the solar equatorial plane. The intersection of the solar equatorial plane with the ecliptic plane defines a line, the longitude of the ascending node, which is taken to be the X(HGI) axis. The X(HGI) axis drifts slowly with time, approximately one degree per 72 years. The magnetic field orientation is defined in relation to the spacecraft. Drawing a line from the Sun's center (HGI origin) to the spacecraft defines the X axis of the HG coordinate system. The HG coordinate system is defined with its origin centered at the spacecraft. Three orthogonal axes are defined, X(HG), Y(HG), and Z(HG). The X(HG) axis points radially away from the Sun and the Y(HG) axis is parallel to the solar equatorial plane and therefore parallel to the X(HGI)-Y(HGI) plane as well. The Z(HG) axis is chosen to complete the orthonormal triad. An excellent reference guide with diagrams explaining the HGI and HG systems may be found in L.F. Burlaga, MHD Processes in the Outer Heliosphere, Space Sci. Rev., 39, 255-316, 1984.

STEREO-A In-Situ Measurements of Particles and CME Transients (IMPACT) Fluxgate Magnetometer (MAG) Magnetic Field Vectors, in Radial-Tangential-Normal (RTN) Coordinates, Level Beacon (LB), PT0.125S Data

STEREO Ahead reprocessed IMPACT/MAG Beacon magnetic field vector component and vector magnitude data expressed in Heliographic, HG, Radial-Tangential-Normal, RTN, Cartesian coordinates around the 2015 solar conjunction. * Version 1: Used internally at UCB and UCLA ONLY, No corrections applied to raw MAG data * Version 2: Offset correction applied to MAG data * Version 3: Initial algorithm for correcting glitches for the X sensor on STEREO Ahead applied * Version 4: Improvement in glitch correction algorithm applied * Version 5: Further refinement of the glitch correction for the X sensor on STEREO Ahead, Also, two timing issues resolved: - a) applying a 6 ms time shift to account for time lag between IMPACT IDPU and MAG - b) fixing an occasional 1 s 'glitch' * Version 6: Added FILTER_VALUE variable

VOYAGER 1 JUPITER MAGNETOMETER RESAMPLED DATA 9.60 SEC

This data set includes Voyager 1 Jupiter encounter magnetometer data that have been resampled at a 9.6 second sample rate. The data set is composed of 6 columns: 1) ctime - this column contains the data acquisition time. The time is always output in the ISO standard spacecraft event time format (yyyy-mm-dd-Thh:mm:ss.sss) but is stored internally in Cline time which is measured in seconds after 00:00:00.000 Jan 01, 1966, 2) br - this column contains the radial component of the magnetic field, 3) bphi - this column contains the phi component of the magnetic field, 4) btheta - this column contains the theta component of the magnetic field, 5) bmag - this column contains the magnitude of the magnetic field, 6) flag - a flag value that indicates either software error or spacecraft hardware interference reduced confidence in this record (flag value of 1 is bad , 0 is good or unchecked). All magnetic field observations are measured in nanoTeslas. The coordinate system for this dataset is Minus System III. All of the magnetic field data are calibrated (see the instrument calibration description for more details). The Jupiter System III coordinate system is defined in Dessler 1983 and the reference documents for this dataset are: Ness et al, 1979 Lepping et al, 1981 Connerney,Acuna,Ness, 1981 Behannon,Burlaga,Ness, 1981

VOYAGER 1 JUPITER MAGNETOMETER RESAMPLED DATA 48.0 SEC

This data set includes Voyager 1 Jupiter encounter magnetometer data that have been resampled at a 48.0 second sample rate. The data set is composed of 6 columns: 1) ctime - this column contains the data acquisition time. The time is always output in the ISO standard spacecraft event time format (yyyy-mm-dd-Thh:mm:ss.sss) but is stored internally in Cline time which is measured in seconds after 00:00:00.000 Jan 01, 1966, 2) br - this column contains the radial component of the magnetic field, 3) bphi - this column contains the phi component of the magnetic field, 4) btheta - this column contains the theta component of the magnetic field, 5) bmag - this column contains the magnitude of the magnetic field, 6) flag - a flag value that indicates either software error or spacecraft hardware interference reduced confidence in this record (flag value of 1 is bad , 0 is good or unchecked). All magnetic field observations are measured in nanoTeslas. The coordinate system for this dataset is Minus System III. All of the magnetic field data are calibrated (see the instrument calibration description for more details). The Jupiter System III coordinate system is defined in Dessler 1983 and the reference documents for this dataset are: Ness et al, 1979 Lepping et al, 1981 Connerney,Acuna,Ness, 1981 Behannon,Burlaga,Ness, 1981

GIOTTO EXTENDED MISSION, MAGNETOMETER V1.0

This dataset contains results from the magnetometer flown aboard the Giotto spacecraft, and recorded during its flyby of Comet P/Grigg-Skjellerup in July of 1992. It contains both raw magnetometer readings from periods during 3 July to 11 July, as well as files containing time-averages of the magnetic field vectors during the encounter period.

VOYAGER 1 JUPITER MAGNETOMETER RESAMPLED DATA 1.92 SEC

This data set includes Voyager 1 Jupiter encounter magnetometer data that have been resampled at a 1.92 second sample rate. The data set is composed of 6 columns: 1) ctime - this column contains the data acquisition time. The time is always output in the ISO standard spacecraft event time format (yyyy-mm-dd-Thh:mm:ss.sss) but is stored internally in Cline time which is measured in seconds after 00:00:00.000 Jan 01, 1966, 2) br - this column contains the radial component of the magnetic field, 3) bphi - this column contains the phi component of the magnetic field, 4) btheta - this column contains the theta component of the magnetic field, 5) bmag - this column contains the magnitude of the magnetic field, 6) flag - a flag value that indicates either software error or spacecraft hardware interference reduced confidence in this record (flag value of 1 is bad , 0 is good or unchecked). All magnetic field observations are measured in nanoTeslas. The coordinate system for this dataset is Minus System III. All of the magnetic field data are calibrated (see the instrument calibration description for more details). The Jupiter System III coordinate system is defined in Dessler 1983 and the reference documents for this dataset are: Ness et al, 1979 Lepping et al, 1981 Connerney,Acuna,Ness, 1981 Behannon,Burlaga,Ness, 1981

ISEE 2 magnetometer 1-min data

This data set contains magnetic field component and magnitude averages every minute, with components given in spacecraft, GSE and GSM coordinates. Standard deviations in the averages are given, as are differences between the averages and model field vectors. Geocentric (GSE and GSM) spacecraft position information is given, as is ISEE1-ISEE2 separation vector information. ISEE 2 spin vector direction and ISEE 2 velocity vector information, relative to the Earth and to ISEE 1, are given. Miscellaneous other parameters are also given.

ISEE 3 Merged Vector Helium Magnetometer (MAG), and Solar WInd Plasma (SWP), 2 min CDF Data

These Files provides access to ISEE 3 Merged Field and Plasma 2-min data generated at the NSSDC as part of preparing ISEE 3 data for the creation of new OMNI data sets. Input to the data set were ISEE 3 Magnetometer, MAG, 1 min Data, Solar Wind Plasma, SWP, 24 s data, and spacecraft position 1 day data, all obtained from ftps://spdf.gsfc.nasa.gov/pub/data/isee/isee3/. Pertinent documentation may be found at the same FTP directory. The annual files of this ASCII data set may be accessed at ftps://spdf.gsfc.nasa.gov/pub/data/isee/isee3/2_min_merged_mag_plasma/as well. Time span: magnetic field from 1978-09-11 to 1982-10-12 and solar wind plasma from 1978-09-11 to 1980-02-19. Note that the magnetic field is given in Spacecraft-Centered, Solar Ecliptic, SE, coordinates.

restrictednotspecifiedAug 2025View details →

MMS 2 Digital Signal Processor (DSP) Search Coil Magnetometer (SCM), Magnetic Field Power Spectral Density, Level 2 (L2), Slow Mode, 16 s Data

The MMS magnetic field power spectral density (BPSD) is computed onboard by the Digital Signal Processor (DSP). The fast Fourier transform (FFT) calculation is performed on a digitized version of analog signals from the Search Coil Magnetometer (SCM) in the SCM123 coordinate system (scm1 = - x sensor; scm2 = -z sensor; scm3 = -y sensor). This data product is computed in space from individual components that are not synchronized to the 1 second pulse. Therefore, the timing between channels can be inaccurate by a fraction of a second. The samples times are interval start times taken from the x component. The spectra are calculated via a 1024-point FFT algorithm on piecewise continuous sets of waveform data. Nine signals can be processed simultaneously. Six of the twelve DC-coupled E, DC-coupled V, or SCM signals (16384 samples/s) are selected for spectral processing at 100% duty cycle. In addition, the three AC-coupled signals (262,144 kS/s) each can be processed at 6.25% duty cycle. Each of the nine signals has 16, 1024-point FFT operations every second; the field-programmable gate array (FPGA) performs 144 FFTs per second. The FFT is performed by an arithmetic logic unit (ALU), which is controlled by a state machine. Both are hard-coded into the FPGA. The operation starts by applying a 1024-point Hanning window onto a waveform. Next, an FFT is implemented. The FFT is broken into a series of "butterfly" operations performed by the ALU. The result has real and imaginary data. Power spectra are calculated by taking the sum of squares of real and imaginary values (the ALU includes a multiplier), which produces a power spectrum with 512 frequency bins. The frequency bins are then combined to give pseudo-logarithmic frequency spacing (del f)/f. The spectra are reduced to 88 frequency bins with (del f)/f between 6% and 12% when possible. Narrow-band emissions can be fit to an accuracy of (del f)/f ~3%, allowing for an accurate determination of plasma density. The spectra can be averaged in time. The fastest reporting rate of any signal is 16 spectra per second. Reporting rates can be as slow a one spectra every 16 s (averaging 256 spectra). The averaging process has 48-bit accuracy to maximize the dynamic range. The amplitudes undergo a pseudo-logarithmic compression to an 8-bit number representing over 120 dB of dynamic range at ~5% precision.

JUNO J FLUXGATE MAGNETOMETER CALIBRATED DATA V1.0

Abstract ======== This data set consists of the Juno FGM calibrated orbital observations. The FGM sensor block uses two miniature ring-core fluxgate sensors to measure the magnetic field in three components of the vector field. There are multiple FGM data products to accomodate different coordinate systems.

ISEE 1 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

ISEE-1 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

GALILEO MAGNETOMETER CRUISE DATA (RTN COORDINATES)

GALILEO MAGNETOMETER CRUISE DATA (IRC COORDINATES)

This data set contains data acquired by the Galileo Magnetometer during the Interplanetary Cruise to Jupiter. The data are at varying resolution depending on the averaging constant applied by the instrument. These data have been fully processed to remove instrument response function characteristics. The data are provided in physical units (nanoTesla) and in 2 coordinate systems. This set of data files contains data in Inertial Rotor Coordinates (IRC= despun spacecraft).

STEREO-B In-Situ Measurements of Particles and CME Transients from the Magnetometer and the Plasma and Suprathermal Ion and Composition Instruments (IMPACT/MAG, PLASTIC) Solar Wind Plasma Data

STEREO-B In-situ Measurements of Particles and CME Transients, IMPACT, Magnetometer Instrument, MAG, Magnetic Field Vector and PLAsma and SupraThermal Ion Composition, PLASTIC, Solar Wind Parameter, Level 2, Data

IMP-8 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

IMP-8 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

nasa8/100

DMSP F17 Special Sensor Magnetometer, SESS/SSM-Boom, Magnetic Field Measurements taken at 850 km, 1 s Data

Defense Meteorology Satellite Program, DMSP, F17 Vector Magnetometer Measurements, 850 km Altitude

nasa8/100

DMSP F18 Special Sensor Magnetometer, SESS/SSM-Boom, Magnetic Field Measurements taken at 850 km, 1 s Data

Defense Meteorology Satellite Program, DMSP, F18 Vector Magnetometer Measurements, 850 km Altitude

nasa8/100

DMSP F16 Special Sensor Magnetometer, SESS/SSM-Boom, Magnetic Field Measurements taken at 850 km, 1 s Data

Defense Meteorology Satellite Program, DMSP, F16 Vector Magnetometer Measurements, 850 km Altitude