Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,669
datasets available to search
ShareScore release 0.9.0
Dataset results
3,669 results for “Lasers”
Elasto-plastic residual stress analysis of selective laser sintered porous materials based on 3D-multilayer thermo-structural phase-field simulations
<p>The supporting data and utilities from the publication "Elasto-plastic residual stress analysis of selective laser sintered porous materials based on 3D-multilayer thermo-structural phase-field simulations" are recorded in this dataset. </p> <p>Non-isothermal phase-field simulations of SLS process on SS316L material and subsequent elasto-plastic calculations were performed to analyze the development of plastic deformation and residual stress in SLS produced components during the processing. The dependence of the fusion zone, residual stress and plastic strain on the processing parameters namely, Beam power (Unit: Watts) and Scan speed (Unit: mm/s) were investigated. </p> <p>To promote FAIR research data principles, the processed simulation data from the thermo-elasto-plastic calculations for all the process parameter sets (hereby refered as P-v sets) are curated in this dataset. The raw temporal data obtained from the processing simulations and the elasto-plastic could not be included in this dataset due to its high volume. However, the corresponding raw data can be requested by contacting the creators of this dataset (Yangyiwei Yang: <a href="mailto:yangyiwei.yang@mfm.tu-darmstadt.de">yangyiwei.yang@mfm.tu-darmstadt.de</a> and Somnath Bharech: <a href="mailto:somnath.bharech@tu-darmstadt.de">somnath.bharech@tu-darmstadt.de</a>).</p> <p>This dataset includes: </p> <ul> <li><code>average_value.csv</code>: Contains average values of mechanical properties (such as residual stress, plastic strain) for the powder bed and the fused strut of all the process parameter sets.</li> <li><code>mesostructures_tep_sls.zip</code> : Contains resampled mesostructures obtained at the last time step of the SLS processing simulations with thermo-elasto-plastic calculations for the P-v sets reported in the aforementioned investigation. Nomenclature of the sub-directories indicating the P-v sets follows: <code>tep_<beam power>-<scan speed></code>. Each of these sub-directories contain the mesostructures from last time step of the thermo-elasto-plastic analysis of each of the four layer scans and is named as: <code>TP_layer{1..4}_output_final.e</code>. These files can be opened using Paraview v.5.8.1 or higher. The nodal values are explained as follows:</li> </ul> <table> <tbody> <tr> <td><strong>Nodal value name</strong></td> <td><strong>Symbol</strong></td> <td><strong>Description</strong></td> <td><strong>Unit</strong></td> </tr> <tr> <td>T</td> <td>\(T\)</td> <td>Temperature field normalized by \(T_M\)</td> <td>-</td> </tr> <tr> <td>c</td> <td>\(\rho\)</td> <td>Substance order parameter</td> <td>-</td> </tr> <tr> <td>eps_ij </td> <td>\(\varepsilon\)</td> <td>Strain</td> <td>-</td> </tr> <tr> <td>epsp_ij</td> <td>\(\varepsilon^\text{pl}\)</td> <td>Plastic strain</td> <td>-</td> </tr> <tr> <td>peeq</td> <td>\(p_\text{e}\)</td> <td>Accumulated plastic strain</td> <td>-</td> </tr> <tr> <td>sigma_ij </td> <td>\(\sigma\)</td> <td>Stress</td> <td>MPa</td> </tr> <tr> <td>vonmises</td> <td>\(\sigma_\text{e}\)</td> <td>von Mises stress </td> <td>MPa</td> </tr> <tr> <td>u</td> <td>\(\mathbf{u}\)</td> <td>Displacement</td> <td>µm</td> </tr> </tbody> </table> <p> </p>
3D Laser Scanning Data: Public Square in Murcia and Engineering Laboratory at the University of Alicante
<p>This dataset includes 3D terrestrial laser scans obtained using the Leica C10 ScanStation. The data covers two distinct scenarios:</p> <ol> <li> <p><strong>Public Square in Murcia Capital</strong>: This dataset includes two scan positions within a public square located in Murcia. Three HDTarget markers were placed, and their center or vertex coordinates are provided in the accompanying _vertices.txt file. The scans were conducted with the laser scanner leveled, but they are not registered.</p> </li> <li> <p><strong>Engineering Laboratory at the University of Alicante</strong>: This dataset consists of two scans of the Ground Engineering Laboratory at the University of Alicante. The scans were conducted with the same leveled laser scanner, and no targets were used. Between the two scans, some elements in the laboratory were slightly moved, which can be identified by comparing the point clouds.</p> </li> </ol>
Data for "Nanoparticle doping and molten-core methods towards highly thulium-doped silica fibers for 0.79 μm-pumped 2 μm fiber lasers – a fluorescence lifetime study"
<p>Includes data for basic characterization of the fibers (concentration profiles from EMPA, refractive index profiles of the preforms and fibers, attenuation of the fibers), as well as the measured fluorescence decay curves.</p>
Resistive switching suppression in metal/Nb:SrTiO3 Schottky contacts prepared by room-temperature Pulsed Laser Deposition
<p>Datafiles of the article "Resistive switching suppression in metal/Nb:SrTiO<sub>3</sub> Schottky contacts prepared by room-temperature pulsed laser deposition".</p>
Investigating the Effects of Laser Wavelengths and Other Ablation Parameters on the Detection of Biogenic Elements and Contaminants in Hydroxyapatite - JAAS - Dataset
<p>The dataset provided contains measurements for an article in The Journal of Analytical Atomic Spectrometry (JAAS). Further details are available in the .txt file included in the folder.</p>
Multivariate curve resolution -alternating least squares augmented with partial least squares baseline correction applied to mid-IR laser spectra resolves protein denaturation by reducing rotational ambiguity
<p>This record contains mid-IR spectra of a titration of beta-lactoglobulin with two detergents. Spectra are stored in the form of Matlab .mat files. More details on the data and data processing can be found in the associated publication.</p><ul><li>F_smooth: Surfactant calibration spectra</li><li>initial_estimate_4c: Intitial estimate of spectra used for MCR-ALS</li><li>protein_spectra_new: Protein spectra obtained by subtracting the background surfactant titration spectra (surftitrationnewwvcorr) from the protein</li><li>titration spectra (prtntitrationnewwvcorr)</li><li>tit_concat_new_mcr: Input for standalone MCR-ALS</li><li>true_conc_sds_nis_pr_cal: Concentrations of SDS and C12E8 as well as protein used in training data for PLS</li></ul>
Data for "Overcoming Laser Phase Noise for Low-cost Coherent Optical Communication"
<p>The files contain the data for the paper "Overcoming laser phase noise for low-cost coherent optical communication".</p>
Statistical behavior of Laser-Induced Plasma and its complementary characteristic signals
<p>The dataset provided contains measurements for an article in The Journal of Analytical Atomic Spectrometry (JAAS). Further details are available in the .txt file included in the folder.</p>
Effect of a laser heat treatment on the thickness distribution of AZ31B Mg Alloy Truncated Cone obtained via Superplastic Forming
<p><span>Thickness distribution of a Mg alloy (AZ31B) truncated cone obtained by means of the superplastic forming process (SPF) starting both from the alloy in the As Received condition and after a localised laser heat treatment, using different initial blank diameters and radii of the laser trajectory </span></p>
Role of laser wobbling welding parameters in dissimilar welding of aluminum and copper alloys: general preliminary process window.
<p>This database explores a wide range of process parameters concerning laser welding of aluminum and copper 0.3 mm thick foils in lap configuration. In particular, this application involves wobbling technique as a dynamic beam shaping for enhancing the formation of a correct interface width in this kind of welding. Given different values of laser power, wobbling tangential speed and wobbling diameter, the results are expressed in terms of weld bead width at the face of the weld bead, weld bead width at the interface between the two sheets and bead penetration depth in the lower sheet. Some trials gave an excessive penetration so that the specimen was cut in two separate parts after the process. This specific type of dissimilar welding is useful for enhancing "hybrid" characteristics of components, where a trade-off between mechanical and electrical or thermal characteristics is needed.</p>
Backscatter tuned laser absorption spectroscopy in additive manufacturing
<p>Raw data accompanying our paper </p> <p><strong>Backscatter absorption spectroscopy for process monitoring in powder bed fusion</strong></p> <p> </p>
Laser-driven acceleration by microstructured silicon targets
<p>Diagnostic data from a high power laser plasma experiment realised at the Central Laser Facility, UK. Target Area Petawatt with the VULCAN OPCPA laser system was used, to compare microstructured silicon targets (produced at the Detektor- & Targetlabor at the Institut für Kernphysik, Technische Universität Darmstadt, Germany) with flat silicon foils. This spreadsheet shows the laser parameters together with the diagnostic data for 1053nm reflection from target, 527nm emission from target, characteristic X-ray, electron and ion spectra.</p>
Data presented in "Laser cooled YbF molecules for measuring the electron's electric dipole moment"
<p>Data underlying figure 2, 3 and 4 of the paper</p>
Comparing laser patterning of submicron structures into metal
<p>Within the EU funded project Laser4Surf European researchers are exploring how using laser structuring can alter and improve the properties or performance of metals. This graphic compares the patterning of metal surfaces with the help of Direct Laser Interference or Direct Laser Ablation (DLA) with Laser Induced Periodic Surface Structures (LIPSS).</p>
Laser wakefield acceleration with active feedback at 5 Hz
<p>The data and code used to produce the plots in Dann <em>et al.</em>, "Laser wakefield acceleration with active feedback at 5 Hz", <em>Phys. Rev. Accel. Beams</em> (2019).</p> <p>This is a sub-set of the data collected during an experiment investigating the use of active feedback in laser wakefield acceleration driven by a 5 Hz, 20 TW laser. The complete data set weighed in at over 800 GB, so this only includes the data used in the above-mentioned publication.</p>
Laser Disdrometer Particle Size and Velocities Distributions Raw data (2014-2017) for Melbourne, Australia
<p>This dataset includes raw data obtained from Laser Disdrometers installed in the proximity of Melbourne, Australia. It includes data from 2 Thies LPM and 2 OTT Parsivel. The description of this dataset as well as a first step in the processing are described in Guyot et al. (under review) at Hydrology and Earth Sciences Systems (publisher EGU) under an open-source Discussion format. </p>
LIBS-wallscanner dataset related to "Scanning laser-induced breakdown spectrometer for mine walls" thesis
<p>This is a LIBS dataset published alongside the thesis in related identifiers. For better description see the thesis publication.</p>
Comparison of three types of laser optical disdrometers under natural rainfall conditions
<p>This dataset contains the raw files of one rain gauge and four disdrometers used for a comparative study of rainfall characteristics measured by optical laser-based disdrometers.</p> <p>Please see data description file for further information.</p>
Data presented in "Deep laser cooling and efficient magnetic compression of molecules"
<p>Experimental data presented in our paper "Deep laser cooling and efficient magnetic compression of molecules"</p>
Single-shot multi-keV X-ray absorption spectroscopy using an ultrashort laser wakefield accelerator source
<p>The data contained in this repository was used to generate the figures for the publication "Single-shot multi-keV X-ray absorption spectroscopy using an ultrashort laser wakefield accelerator source".</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.