Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,828
datasets available to search
ShareScore release 0.9.0
Dataset results
8,828 results for “product”
Global leaf inclination angle (LIA) and nadir leaf projection function (G(0)) products
<p>Leaf inclination angle (LIA), the angle between leaf surface normal and zenith directions, is a vital parameter in radiative transfer, rainfall interception, evapotranspiration, photosynthesis, and hydrological processes. In the radiative transfer regime, LIA is generally represented by the leaf projection function (G(θ)), which is defined as the average projection ratio of unit leaf area in the illumination or viewing direction θ.</p> <p>This dataset (CAS-GLA) includes the first global mean LIA (MLA) and nadir leaf projection function (G(0)) products at the spatial resolutions of 500 m and 0.05 degrees. The products are recorded in GeoTIFF format under the WGS-84 geographic coordinate system. The global 500 m MLA product was generated by gap-filling LIA measurement data using a random forest regressor after a series of preprocessing, such as spatial expansion, LIA upscaling, and sample screening. Cross-validation shows that the predicted MLA presents a medium consistency (<em>r</em> = 0.75, RMSE = 7.15°) with the validation samples. The 500 m MLA product was further upscaled to 0.05 degrees by weighting the MODIS 500 m leaf area index. The G(0) product was derived from the MLA by assuming a single-parameter ellipsoidal leaf angle distribution. The G(0) product agrees moderately with high-resolution reference data (<em>r </em>= 0.62, RMSE = 0.15). Note the global MLA and G(0) products mainly represent the typical state during the growing season from 2001 to 2022. The MLA and G(0) products would enhance our knowledge about global LIA and should greatly facilitate remote sensing retrieval and land surface modeling studies.</p> <p>In the version 1.1, two quality layers were added to 500 m MLA product to represent the quality of input data and the prediction model. The input data quality was denoted by the proportion of high-quality BRDF inversions for each pixel. The prediction model quality was represented qualitatively for each pixel considering whether the MLA was predicted by extrapolating beyond the range of the training samples. In the 500 m MLA product, the three bands sequentially store MLA, input data quality (scale factor = 0.01), and model quality (1: predictions within the range of samples; 0: predictions out of the range of samples).</p>
Research data: Continuity Amid Transformation: An Analysis of Pottery Production from the Late La Tène to Early Roman Periods in Eastern Bohemia
<p>Data used in the research presented in the article titled "Continuity Amid Transformation: An Analysis of Pottery Production from the Late La Tène to Early Roman Periods in Eastern Bohemia".</p> <p><strong>Abstract of the article:</strong></p> <p>At the end of the La Tène period and the beginning of the Roman period in the first century BC, society in Central Europe underwent a significant transformation, which included notable changes in pottery production. This transformation is often attributed to the collapse of the social structures of the La Tène period and the arrival of a new population. Pottery production, in particular, is generally considered to have undergone a complete transformation.</p> <p>However, previous studies on this transition have primarily focused on the stylistic analysis of shapes and decorations, as illustrated by the pottery assemblage from Slepotice (Eastern Bohemia). In order to obtain additional data on the transitional period, this study of pottery from Slepotice incorporates analyses of the materials used and the manufacturing process through macroscopic observation, X-ray fluorescence analysis, and thin-section analysis. These analyses provide new insights into the differences in pottery production and distribution during the first century BC.</p> <p>Our research indicates that while the transformation included the collapse of the La Tène socioeconomic network, it did not result in a complete break in the pottery production process.</p> <p>Link to the article: <a href="https://doi.org/10.1016/j.jasrep.2025.105073">https://doi.org/10.1016/j.jasrep.2025.105073</a></p> <p> </p> <p><strong>List of the files:</strong></p> <p>Supplementary Material 1<br>Settlement structure in the vicinity of Slepotice during the La Tène and Roman periods: 1 – Slepotice, 2 – České Lhotice, 3 – Brčekoly, 4 – Chrudim</p> <p>Supplementary Material 2<br>Values of pottery attributes (Mat, InMn, InVar, In, traces left from the shaping process, Po, Vy, and morphological groups) classified based on macroscopic observation</p> <p>Supplementary material 3<br>Schematic classification of rim attributes, illustrating different variants of rim direction (Op), thickening of the upper part of the rim (Oz), and trimming of the lip (Os)</p> <p>Supplementary material 4<br>Attributes of the 30 samples selected for XRF analysis based on macroscopic observation. These attributes include fabric properties, surface treatment, morphological features, and technological traces</p> <p>Supplementary material 5<br>Figures of ceramic samples (with corresponding IDs) from feature 144/1998 showing preserved rims and bases</p> <p>Supplementary material 6<br>Figures of ceramic samples (with corresponding IDs) from feature 355/2001 showing preserved rims</p> <p>Supplementary Material 7<br>Chemical composition of 30 selected samples according to XRF analysis (main oxides in wt%, and elements in ppm)</p> <p>Supplementary Material 8<br>Principal Component Analysis (PCA) results: The scree plot (top left) visualises the proportion of variance explained by each principal component. The biplots (top right and bottom right) illustrate the distribution of samples, with arrows indicating the contribution of specific elements to the observed variance. The dendrogram (bottom left) shows hierarchical clustering of the samples, aiding in the selection of representative samples for thin-section petrographic analysis</p> <p>Supplementary Material 9<br>Relationships between the dating and other attributes of pottery classified based on macroscopic observation. These attributes include fabric properties, surface treatment, morphological features, and technological traces</p> <p>Supplementary Material 10<br>Relationships between the chemical groups (determined by XRF analysis) and pottery attributes classified based on macroscopic observation. These attributes include fabric properties, surface treatment, morphological features, and technological traces</p> <p>Supplementary Material 11<br>Petrography of fabric groups and subgroups, focusing on their properties. The evaluation begins with a general assessment of each fabric group as a whole, followed by a detailed examination of its subgroups</p> <p>Supplementary Material 12<br>Petrographic characterization of ceramics using a semiquantitative scale, simplified for statistical analysis (0.1 – trace, 0.5 – rare, 1 – occasional, 2 – common, 3 – frequent, 4 – abundant, 5 – dominant)</p> <p>Supplementary Material 13<br>Thin-section samples: Description of the ceramic matrix, natural inclusions, and added tempers</p> <p>Supplementary material 14<br>Variations in chemical composition among different fabric groups</p>
Net primary production from the Behrenfeld-CbPM, Westberry-CbPM and Silsbe-CAFE algorithms - HADLEY MLD 0.125 Criterion
<p>Net primary production (mg C m-2 d-1) calculated from the Behrenfeld-CbPM, Westberry-CbPM and Silsbe-CAFE algorithms. MLD data taken from HADLEY EN4.2.2 using the density criterion of 0.125 kg m-3. </p> <p>Data on a regular 25km grid at a 8 day resolution.</p> <p><strong>Version 1.1</strong></p> <p>Fixed minor issues with:</p> <ol> <li>Conversion of bbp(443) to phytoplankton carbon.</li> <li>Missing values at ~180W.</li> </ol> <p> </p> <p><strong>Version 1.2</strong></p> <ol> <li>Updated to include 2023.</li> <li>Westberry-CbPM Nitracline depth updated with World Ocean Atlas 2023 Nitrate Data.</li> <li>Silsbe-CAFE bbwater calculations updated with World Ocean Atlas 2023 Salinity Data.</li> <li>File structure compressed using Zlib.</li> </ol> <p>Please note for Westberry-CbPM and Silsbe-CAFE all years were reprocessed.</p> <p> </p> <p><strong>Version 1.3</strong></p> <ol> <li>Updated to include 2024.</li> </ol>
Net primary production from the Lee-AbPM algorithm
<p>Net primary production (mg C m-2 d-1) calculated from the Lee-AbPM algorithm.</p> <p>Data on a regular 25km grid at a 8 day resolution.</p> <p><strong>Version 1.1</strong></p> <ol> <li>Updated to include 2023.</li> </ol> <p><strong>Version 1.2</strong></p> <ol> <li>Updated to include 2024.</li> </ol>
S68 | HSDBTPS | Transformation Products Extracted from HSDB Content in PubChem
<p>This is the collection associated with list S68 HSDBTPS Transformation Products Extracted from HSDB Content in PubChem on the NORMAN Suspect List Exchange.</p> <p><a href="https://www.norman-network.com/nds/SLE/">https://www.norman-network.com/nds/SLE/</a></p> <p>HSDBTPS is a list of metabolites / transformation products extracted from the "Metabolites/Metabolism" section from HSDB (Hazardous Substance Data Bank) in PubChem (<a href="https://pubchem.ncbi.nlm.nih.gov/source/11933">https://pubchem.ncbi.nlm.nih.gov/source/11933</a>). Dataset DOI: <a href="https://doi.org/10.5281/zenodo.3827487">10.5281/zenodo.3827487</a>.</p> <p>Entries automatically extracted from HSDB are manually validated to remove mismatching CIDs, and add additional CIDs not captured using the descriptions provided. Files are created with a default to not import any data until this has been checked. Please report any mismatches, despite best efforts it is possible that errors are present, all files are under version control so that entries can be corrected/updated/enhanced over time and recommitted.</p> <p>Recent uploads (2022 and later) are handled with ShinyTPs (<a href="https://gitlab.lcsb.uni.lu/eci/shinytps">code</a> + article from Palm et al 2023 DOI:<a href="https://doi.org/10.1021/acs.estlett.3c00537">10.1021/acs.estlett.3c00537</a>). The original code associated with this deposit is located <a href="https://gitlab.lcsb.uni.lu/eci/pubchem/-/tree/master/annotations/tps/">here</a>. </p> <p>Updates:</p> <p>16 May 2020: Added the source file (extract of all HSDB Metabolites/Metabolism entries as is from JSON file), plus an updated S68_HSDBTPS_StructInfoOnly.csv with one new structure and renamed to include S68, plus the first draft of the Transformations table. 28 May 2020: added InChIKey and DIXSID files. 11 June 2020: added updated Transformations and Structure files to contain new CIDs and resulting reactions from new PubChem registrations. Dec 23, 2022: first dataset from Emma Palm added, using her TP curation app. DTXSID file dropped. 23 Mar 2023: added Biosystem and Enzyme columns, filling in biosystem where appropriate. 24 Mar 2023: new azo dye reactions from Emma Palm added. 1 Apr 2023: more azo dye reactions from Emma Palm. 4 Apr 2023: added new CIDs. 27 June 2023: added many new substances, including new CIDs. 28 June 2023 added transformations, 30 June 2023 added new CIDs. 11 July added missing CIDs to transformations table. 18 Nov 2023: added new reactions from Jolly Komolo (no new CIDs). 1 Dec 2023: new reactions from Marie, incl. two new CIDs. 19 Dec 2023: new reactions from Marie, incl. 1 new CID, updated CIDs from Dec 1. 29 April 2024: new reactions from Marie, CID updated. 16 July 2024: added reactions from Olga. 26 July 2024: added BPA=>MBP. 6 Aug 2024: adjusted many triazine names, added one new reaction. 27 Nov 2024: added Griseofulvin reactions. 8 Feb 2025: added Sertraline TP. 14 Mar 2025: added missing CID for O-Demethyl phosphamidon.</p>
MEaSUREs ITS_LIVE Sentinel-1 Image-Pair Glacier and Ice Sheet Surface Velocities: Version 2 (Greenland Sample Products)
<p>We provide 21 sample products of MEaSUREs ITS_LIVE Sentinel-1 Image-Pair Glacier and Ice Sheet Surface Velocities: Version 2 in three test regions of Greenland Ice Sheet. The full archive of version 2 ITS_LIVE products (including image pair maps, data cubes and mosaics) from Sentinel-1 as well as other optical sensors (Landsat-4/5/6/7/8 and Sentinel-2) can be found at the ITS_LIVE project website: <a href="https://its-live.jpl.nasa.gov/">https://its-live.jpl.nasa.gov</a>.</p> <p><strong>Sensor</strong>: Sentinel-1A/B</p> <p><strong>Processor</strong>: <a href="https://github.com/isce-framework/isce2">ISCE</a>v2.4.1 (topsApp -> <a href="https://github.com/leiyangleon/Geogrid">Geogrid</a>v1.4.0 -> <a href="https://github.com/nasa-jpl/autoRIFT">autoRIFT</a>v1.4.0)</p> <p><strong>Project</strong>: NASA MEaSUREs project <a href="https://its-live.jpl.nasa.gov">ITS_LIVE</a></p> <p><strong>Region 1</strong> (69.13N, 50.88W; Jakobshavn Isbræ Glacier): 7 ascending image pairs</p> <p><strong>Region 2</strong> (77.61N, 42.79W; central north of interior Greenland): 3 ascending image pairs</p> <p><strong>Region 3</strong> (72.48N, 35.87W; central south of interior Greenland): 10 descending image pairs and 1 ascending image pair</p> <p>This serves as a supplementary dataset for the companion journal article submitted to Earth System Science Data (to appear).</p> <p> </p> <p><strong>Acknowledgement</strong>: This effort was funded by the NASA MEaSUREs program in contribution to the Inter-mission Time Series of Land Ice Velocity and Elevation (ITS_LIVE) project (<a href="https://its-live.jpl.nasa.gov/">https://its-live.jpl.nasa.gov/</a>) and through Alex Gardner’s participation in the NASA NISAR Science Team.</p>
Improvement of abalone hatchery and nursery production processes using organic preparation techniques
<p>France Haliotis tested the effects of different settlement cues on settlement and survival of European abalone (Haliotis tuberculata)</p>
GWTC-3: Compact Binary Coalescences Observed by LIGO and Virgo During the Second Part of the Third Observing Run — Data Quality Products for GW Searches
<p>This material is part of several data products associated with GWTC-3, the third Gravitational-Wave Transient Catalog from the <a href="https://www.ligo.org/">LIGO</a> Scientific Collaboration, the <a href="https://www.virgo-gw.eu/">Virgo</a> Collaboration, and the <a href="https://gwcenter.icrr.u-tokyo.ac.jp/en/">KAGRA</a> Collaboration. For more information, see the paper (<a href="https://dcc.ligo.org/LIGO-P2000318/public">dcc.ligo.org/LIGO-P2000318/public</a>), the related material linked from this page, and the GWTC-3 data release documentation (<a href="https://www.gw-openscience.org/GWTC-3/">www.gw-openscience.org/GWTC-3/</a>).</p> <p>This release contains two data-quality products that are used by search analyses to help mitigate non-Gaussian noise in the detector data. Gating removes short-duration artifacts from the data by smoothly rolling the affected data to zero. The <a href="https://doi.org/10.1088/2632-2153/abab5f">iDQ glitch likelihood</a> uses machine learning to predict the probability that a non-Gaussian transient is present using information from auxiliary channels.</p> <p><br> <strong>Gating files used in analyses of O3 LIGO data</strong></p> <p>As a pre-processing step, the <a href="https://pycbc.org/">PyCBC</a> search pipeline uses an inverted-Tukey window to mitigate the effect of loud, non-Gaussian features in the data. This is further described in <a href="https://dx.doi.org/10.1088/0264-9381/33/21/215004">Usman <em>et al.</em> 2016</a>.</p> <p>A subset of these times are the times listed in the txt files</p> <ul> <li>H1-O3_GATES_1238166018-31197600.txt</li> <li>L1-O3_GATES_1238166018-31197600.txt</li> </ul> <p>These times in these files were chosen based on auxiliary monitors of overflows in the digital-to-analog converters used to control the positions of the test masses. The gated times (i.e. the time period where the data is zeroed) are time segments where these monitors recorded an overflow were. The central time and suggested half-width of zero time were chosen to fully cover these time seconds. The final gating parameter, the suggested taper time was chosen to be 0.5 to balance the cost of impacting more data with the window function versus introducing additional artifacts into the data.</p> <p>The syntax of the files themselves is</p> <p>{central time} {suggested half-width of zero time} {suggested taper time}</p> <p>with each row containing the parameters of a single gate.</p> <p>The included notebook provides an example of how to read in and apply one of the suggested gates.</p> <p><br> <strong>Renormalized iDQ timeseries</strong></p> <p>The renormalized iDQ timeseries data-quality product is used within the GstLAL search pipeline to generate results for GWTC-3. This data product was found to be statistically helpful in improving data quality within the <a href="https://lscsoft.docs.ligo.org/gstlal/">GstLAL</a> search pipeline. This is further described in <a href="https://arxiv.org/abs/2010.15282">Godwin <em>et al</em>. 2020</a>.</p> <p>This file contains a time series for each LIGO detector related to the probability of a glitch in the strain data given the behavior in analyzed auxiliary channels monitoring the behavior of the detectors and their environment.</p> <ul> <li>H1L1-IDQ_TIMESERIES-1256655642-12905976.h5</li> </ul> <p>The HDF5-formatted file contains two groups, H1 and L1, corresponding to LIGO Hanford and LIGO Livingston, respectively. Each group contains several datasets; the data dataset corresponds to the renormalized iDQ log-likelihoods, as described in <a href="http://doi.org/10.1088/2632-2153/abab5f">Godwin <em>et al</em>. 2020</a>, and the time dataset corresponds to the times associated with the renormalized iDQ log-likelihoods in the data dataset.</p> <p> </p> <p><strong>How to download all files from this page</strong></p> <p>If you would like to download all files on this page, we recommend <a href="https://gitlab.com/dvolgyes/zenodo_get">zenodo_get</a>:</p> <pre><code class="language-bash">pip install zenodo_get zenodo-get RECORD_ID_OR_DOI </code></pre> <p>where the record ID for the most recent version of this page is 5636795 and IDs for other versions can be found in the Versions section at the side of this page.</p> <p> </p> <p>For more general background on gravitational-wave data quality, try the materials from a <a href="https://www.gw-openscience.org/workshops/">GW Open Data Workshop</a> or the <a href="https://doi.org/10.1088/1361-6382/ab685e">guide to LIGO–Virgo data analysis</a>. </p>
Dataset from Holding et al. (2019)––Seasonal and spatial patterns of primary production in a high latitude fjord
<p>Unprecedented melting of the Greenland Ice Sheet (GrIS) is impacting the coastal ocean, and its effects on fjord ecology remain understudied. It has been suggested that as glaciers retreat, primary production regimes may be altered, rendering fjords less productive. Here we present data from the paper Holding et al. (2019). Seasonal and spatial patterns of primary production in a high-latitude fjord affected by Greenland Ice Sheet run-off. <em>Biogeosciences</em>, <em>16</em>(19), 3777-3792, /doi.org/10.5194/bg-16-3777-2019. This paper investigates patterns of primary productivity in a northeast Greenland fjord (Young Sound, 74°N), which receives run-off from the GrIS via land-terminating glaciers. This dataset includes measures of size fractioned primary production and chlorophyll <em>a </em>biomass, as well as CTD data and biochemical parameters. Furthermore, primary production was measured using photosynthesis v. irradiance (PI) curves, thus PI curve parameters are also available. The data were taken during the ice-free season along a spatial gradient of meltwater influence. </p> <p>We thank Egon Frandsen, Kunuk Lennert, and Ivali Lennert for excellent assistance during fieldwork. This research has beensupported by the Danish Environmental Protection Agency’s programme for Arctic research (DANCEA) (grant no. MST-112-0023), The Carlsberg Foundation (grant no. 2013_01_0532), the Norwegian Research Council (Mi- croPolar) (grant no. RCN 225956), and the European Commission, H2020 Research Infrastructures (GrIS-Melt (grant no. 752325) and INTAROS (grant no. 727890)). </p>
Natural Products of ChemBioSys
<p>Documented collection of natural product structures that have been discovered, described or mentioned in a review by members of the CRC ChemBioSys (chembiosys.de)</p>
Data and code for the publication "The effect of rainfall changes on economic production"
<p>The zipped file of this repository contains code and data to reproduce the results of the publication:</p> <p>Kotz et al, Nature, The effect of rainfall changes on economic production. (2021). <a href="http://doi.org/10.1038/s41586-021-04283-8">https://doi.org/10.1038/s41586-021-04283-8</a></p> <p> </p> <p>Economic data are derived from the DoSE database: <a href="http://doi.org/10.5281/zenodo.4681305">https://doi.org/10.5281/zenodo.4681305</a></p> <p>Climate data are derived from the ERA-5 reanalysis: <a href="https://www.ecmwf.int/en/forecasts/datasets/reanalysis-datasets/era5 ">https://www.ecmwf.int/en/forecasts/datasets/reanalysis-datasets/era5 </a></p> <p> </p> <p>Please see the README document for detailed:</p> <p>- Descriptions of the code and data provided</p> <p>- Lists of the required dependencies</p> <p>- Naming conventions for variables</p> <p> </p>
Seawater isoprene loss and production rates across contrasting oceanic regions
<p><strong>Measured biological variables and isoprene process rate constants across contrasting regions of the global ocean. </strong>SST: sea surface temperature;<strong> </strong>SSS: sea surface salinity; Z<sub>ML</sub>: mixed layer depth; U<sub>10</sub> 24h: wind speed at 10 m above sea surface, averaged over 24 hours; chl<em>a</em>: chlorophyll-<em>a</em> concentration; BA: bacterial abundance; k<sub>loss</sub>: rate constant of isoprene loss in incubations (microbial degradation + chemical oxidation); k<sub>vent</sub>: rate constant of isoprene ventilation to the atmosphere; k<sub>mix</sub>: rate constant of isoprene vertical mixing by turbulent diffusion at the bottom of the mixed layer (negative means import into the surface mixed layer); total τ: turnover time due to all sinks; k<sub>prod</sub>: rate constant of isoprene production, assuming 24-h steady state for the isoprene concentration; sp. prod. rate: chl<em>a</em>-normalized daily rate of isoprene production.</p> <p><strong>Results of the coastal seawater dark incubations for isoprene loss kinetics. </strong>SST: lab-incubation temperature (within ±0.5ºC of the in-situ temperature); chl<em>a</em>: chlorophyll-<em>a</em> concentration; isoprene concentration; std err: standard error of duplicate isoprene concentration measurements. The experiments were conducted with water from the Blanes Bay Microbial Observatory (coastal NW Mediterranean) and the coral reef lagoon of Moorea (French Polynesia).</p> <p><strong>Results of the coastal seawater dark incubations for isoprene oxidation assays. </strong>SST: in-situ and incubation temperature; chl<em>a</em>] chlorophyll-<em>a</em> concentration; isoprene concentration. </p>
Global leaf chlorophyll content (LCC) product from MODIS imagery (2000-2020)
<p>The spatial and temporal distribution of leaf chlorophyll content (LCC) is critical for understanding the capacity of vegetation photosynthesis. Here, a global 8-day leaf chlorophyll content (LCC) dataset at 500-m resolution was generated from MODIS data using a matrix system with two pairs of vegetation indices. </p> <p><strong>The following paper should be cited when using the data:</strong></p> <p>Xu, M., Liu, R., Chen, J.M., Liu, Y., Wolanin, A., Croft, H., He, L., Shang, R., Ju, W., Zhang, Y., He, Y., Wang, R., 2022. A 21-year time-series of global leaf chlorophyll content maps from MODIS imagery. IEEE Trans. Geosci. Remote Sens. <a href="https://doi.org/10.1109/TGRS.2022.3204185">https://doi.org/10.1109/TGRS.2022.3204185</a>.</p> <p>Detailed description of data organization can be found in the uploaded document "1Readme.docx".</p> <p>The whole dataset of MODIS LCC product is from 2000 to 2020. <strong>Due to the data volume limitation of Zenodo, currently the data from 2000-2010 can be downloaded through Google Drive sharing link:</strong></p> <p><a href="https://drive.google.com/drive/folders/11eXetjsAB_ZjFqGs8SXEWzd6byr_8LoW?usp=sharing">https://drive.google.com/drive/folders/11eXetjsAB_ZjFqGs8SXEWzd6byr_8LoW?usp=sharing</a></p> <p><strong>Related dataset: </strong>Mingzhu, X., Liu, R., Chen, J. M., Shang, R., & Liu, Y. (2022). Global leaf chlorophyll content product from MERIS imagery (GLOBMAP MERIS LCC) [Data set]. Zenodo. <a href="https://doi.org/10.5281/zenodo.10467919">https://doi.org/10.5281/zenodo.10467919</a></p> <p>For any other questions, please send email to Mingzhu Xu (<a href="mailto:xumzhu@gmail.com">xumzhu@gmail.com</a>).</p>
Supporting model output for article "Assessing the potential impact of river chemistry on Arctic coastal production"
<p>The following is a summary of processed model output data from a series of HiLAT model runs.<br> A description of the model runs and visualization of model output and analysis can be found in the<br> accompanying manuscript.</p> <p><br> Gibson G. A., Elliott, S., Piliouras, A. Clement Kinney, J., Jeffery, N. (2022) Assessing the potential<br> impact of river nitrate on coastal production in the Arctic. Frontiers in Marine Science: Coastal Ocean<br> Processes.</p> <p><br> This work was supported by the Regional and Global Model Analysis (RGMA) program of the US<br> Department of Energy’s Office of Science as a contribution to the HiLAT project. Additional support for<br> this project was provided by the National Science Foundation, under award #173886.<br> </p> <p><strong>River Nutrient Forcing</strong></p> <p>The experiments involved modifying the nutrient concentrations in the river nutrient forcing files.<br> The river nutrient files are specified during model setup. For use in the HiLAT model, GNEWS annual<br> river nutrient inputs were partitioned into twelve monthly forcing values. The nearest ocean grid point<br> to each of the GNEWS river mouth locations was identified and then, as with the runoff, the nutrient<br> inputs for each river basin were spatially mapped to surface ocean model grid cells, which are 10 meters<br> thick, such that the spatial pattern of river nutrient dispersion follows river water inputs to the oceans.</p> <p>The experiments were:<br> i) The baseline model simulation: The 12 monthly values for each grid cell were constant in time.<br> <strong>river_nutrients_GNEWS2000_gx1v6.nc</strong><br> ii) an experiment in which baseline Arctic River Nitrogen (NO 3 and NH 4 ) concentrations were doubled.<br> <strong>river_nutrients_GNEWS2000_gx1v6_x2Arctic.nc</strong><br> iii) an experiment in which baseline Arctic River Nitrogen (DON and DIN) concentrations were scaled to<br> the river volume discharge contained in <strong>runoff.daitren.iaf.20120419.nc</strong><br> <strong>river_nutrients_GNEWS2000_gx1v6_scaled_climatology.nc</strong><br> iv) an experiment in which the scaled river nutrient discharge (iii) was shifted earlier by two months.<br> <strong>river_nutrients_GNEWS2000_gx1v6_shifted2m_climatology.nc</strong><br> v) an experiment in which the scaled river nutrient discharge (iii) was shifted earlier by a month and<br> doubled in concentration.<br> <strong>river_nutrients_GNEWS2000_gx1v6_shifted_climatology_x2.nc</strong></p> <p>River nutrient fluxes are in units of nmol/cm2/s<br> Only concentrations within the domain TLONG>=60 &TLONG <=340 & TLAT >=60 were modified in<br> concentration/timing.</p> <p><br> Variables of interest:<br> din_riv_flux: dissolved inorganic nitrogen river flux<br> don_riv_flux: dissolved organic nitrogen river flux</p> <p>Each of the experiments is described in detail in Gibson et al (2022).</p> <p>---------------------------------------------<br> There are multiple versions of most output file types, corresponding to the river nutrient experiments that<br> were conducted.</p> <p><br> Many variables in the output files are <strong>regional averages</strong> where model regions are indicated by a number<br> *note - for aesthetics, the numbering used in the model output files differs slightly from the numbering<br> used in the accompanying manuscript. The numbers assigned in the analysis files aligns with the numbers<br> assigned to regions within the region mask provided in the grid file.</p> <p><strong>Grid File/region masks</strong><br> gx1v6_polar_mask_coast.5.22.20c.nc This file is an updated version of the standard grid file. It has been<br> updated to include the addition of a coastal Arctic region variable ‘Arctic_Coast_Mask’ which indicates<br> which grid cells are in the coastal regions used in the analysis and the Arctic_Region variable which<br> indicates which grid cells are in the broader regions.</p> <p><br> Variables contained in this file are:<br> Arctic_Coast_Mask: contains values 0-9 indicating which (if any) coastal region a grid cell is in<br> Arctic_Region Mask: contains values 0-11 indicating which (if any) region a grid cell is in</p> <p><br> TLAT: latitude of grid cell<br> TLONG: longitude of grid cell<br> TAREA: Area of grid cell<br> HT: Bathymetry of grid cell</p> <p> </p><table> <tbody> <tr> <td> </td> <td> <p><strong>Arctic_Region (seas)</strong></p> </td> <td> <p><strong>Arctic_Coast_Mask </strong><strong>(coast)</strong></p> </td> </tr> <tr> <td> <p><strong>Bering Sea</strong></p> </td> <td> <p>1</p> </td> <td> <p>1</p> </td> </tr> <tr> <td> <p><strong>Chukchi Sea</strong></p> </td> <td> <p>2</p> </td> <td> <p>2</p> </td> </tr> <tr> <td> <p><strong>East Siberian Sea</strong></p> </td> <td> <p>3</p> </td> <td> <p>3</p> </td> </tr> <tr> <td> <p><strong>Laptev Sea</strong></p> </td> <td> <p>4</p> </td> <td> <p>4</p> </td> </tr> <tr> <td> <p><strong>Beaufort Sea</strong></p> </td> <td> <p>5</p> </td> <td> <p>5</p> </td> </tr> <tr> <td> <p><strong>Barents Sea</strong></p> </td> <td> <p>6</p> </td> <td> <p>6</p> </td> </tr> <tr> <td> <p><strong>Canadian Basin</strong></p> </td> <td> <p>7</p> </td> <td> <p>-</p> </td> </tr> <tr> <td> <p><strong>Eurasian Basin</strong></p> </td> <td> <p>8</p> </td> <td> <p>-</p> </td> </tr> <tr> <td> <p><strong>Nordic Seas</strong></p> </td> <td> <p>9</p> </td> <td> <p>7</p> </td> </tr> <tr> <td> <p><strong>Labrador Sea</strong></p> </td> <td> <p>10</p> </td> <td> <p>8</p> </td> </tr> <tr> <td> <p><strong>Kara Sea</strong></p> </td> <td> <p>11</p> </td> <td> <p>9</p> </td> </tr> </tbody> </table> --------------<p></p> <p> </p><p>Model outputs that were analyzed in the manuscript are contained in three different kinds of output file.<br> For each file type a file exists for each river nutrient experiment.</p> <p></p> <p>The following series of files contains variables related to the particulate organic carbon flux to the<br> sediment, demineralization and remineralization rates.<br> bgc_T62_gx1GIF_nut-riv-BASELINE-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2xArcticN-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv_2XDC-coast_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-BASELINE-seas_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-seas_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2xArcticN-seas_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-seas_region-sed-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-seas_region-sed-137-157.nc</p> <p><br> Variables contained in these are:<br> POCTOSED_AVG* : Particulate organic carbon flux to sediment<br> PONTOSED_AVG* : Particulate organic nitrogen flux to sediment<br> SEDDENITRIF_AVG* : Sediment denitrification rate<br> POC_PROD_AVG* : Production of Particulate organic carbon<br> POC_FLUX_AVG* : Particulate organic carbon flux into layer/cell<br> DON_REMIN_AVG* : Dissolved Organic Nitrogen remineralization rate<br> DOC_REMIN_AVG* : Dissolved Organic Carbon remineralization rate<br> DIAT_N_LIM_AVG* : Diatom nitrogen limitation<br> DIAT_N_LIM_AVG* : Diatom nitrogen limitation<br> DIAT_P_LIM_AVG* : Diatom phosphorous limitation<br> DIAT_FE_LIM_AVG* : Diatom iron limitation<br> DIAT_LIGHT_LIM_AVG*: Diatom light limitation<br> SP_N_LIM_AVG* : Small phytoplankton nitrogen limitation<br> SP_P_LIM_AVG* : Small phytoplankton phosphorous limitation<br> SP_FE_LIM_AVG* : Small phytoplankton iron limitation<br> SP_LIGHT_LIM_AVG* : Small phytoplankton light limitation<br> Where * represents the coastal region number.<br> ----------------------------------------</p> <p><br> The following series of files contains primary production for the small and large phytoplankton groups<br> and the zooplankton biomass.</p> <p>Coastal regional averages – based on regions marked in the Arctic_Coast_Mask variable<br> bgc_T62_gx1GIF_runoff-2xArcticN-region-prod-ACM-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-region-prod-ACM-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-region-prod-ACM-137-157.nc<br> bgc_T62_gx1GIF_riv-BASELINE-region-prod-ACM-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-region-prod-ACM-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2XDC-region-prod-ACM-137-157.nc</p> <p>Regional seas averages – based on regions marked in the Arctic_Region variable<br> bgc_T62_gx1GIF_runoff-2xArcticN-region-prod-seas-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-region-prod-seas-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-region-prod-seas-137-157.nc<br> bgc_T62_gx1GIF_riv-BASELINE-region-prod-seas-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-region-prod-seas-137-157.nc</p> <p>Variables contained in these files are:<br> TAREA_SUM* – total area of the region<br> PPSP_REGSUM* – sum of primary production by small phytoplankton in a region<br> PPDIAT_REGSUM*– sum of primary production by diatoms in a region<br> ZOOC_AVG*– sum of zooplankton biomass in a region</p> <p>----------------------------------------<br> The following series of files contains ice associated variables and mixed layer nutrients</p> <p>bgc_T62_gx1GIF_nut_riv-2xArcticN-ice_coastal-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-ice_coastal -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-ice_coastal -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-BASELINE-ice_coastal -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-ice_coastal -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2XDC-ice_coastal -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2xArcticN-ice_seas-137-157.nc<br> bgc_T62_gx1GIF_nut-riv-mon-clim-ice_seas -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-month-shiftx2-ice_seas -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-BASELINE-ice_seas -137-157.nc<br> bgc_T62_gx1GIF_nut-riv-2mon-shift-ice_seas-137-157.nc</p> <p>HI_REGAVG* : Regional averaged ice depth<br> HS_REGAVG* : Regional averaged snow depth<br> ICEAREA_REGSUM* : Regional sum ice area<br> ICEVOL_REGSUM*: Regional sum volume area<br> MLAM_REGAVG* : Regional average ammonium concentration in mixed layer<br> MLNIT_REGAVG* : Regional average nitrate concentration in mixed layer<br> PP_REGAVG* : Regional average primary production (ice algae)<br> PP_REGSUM* : Regional total primary production (ice algae)<br> TAREA_SUM* : Total area of region<br> TIME : time</p>
Innovative forest products in the circular bioeconomy: online survey questionnaire and dataset
<p>This upload includes the dataset and questionnaire for an online survey with stakeholders, as part of a case study done for the BioMonitor project. The survey participants work in EU-based organizations involved in the development and manufacture of forest products, especially of the following categories: construction materials, textiles, chemicals, bioplastics, and wood-based composites.</p> <p> <br> <strong>About BioMonitor</strong><br> BioMonitor is an EU-funded project (biomonitor.eu) that aims to establish a sustainable and robust framework that different stakeholders can use to monitor and measure the bioeconomy and its various impacts in relation to the EU and its Member States. The BioMonitor consortium is composed of a team of universities, statistical and standardisation institutes as well as consultancies and data modelling experts.</p> <p><em>This work was supported by the BioMonitor project, which has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under Grant Agreement N° 773297.</em></p>
Hoppe-Droit - Élaborer un outil d'observation des productions pédagogiques en droit
<p>Le projet CollEx-Persée HOPPE-Droit visait l’élaboration d’un outil d’observation des productions pédagogiques en droit qui permettrait d’étudier, à partir d’un répertoire dynamique, les évolutions du droit français et de son enseignement depuis le XIXe siècle. Il est le fruit d’un partenariat entre la bibliothèque Cujas, le CERCRID et l’IRJS.</p> <p>Démarré en avril 2019, il s’est achevé en 2021 par la mise en production de l’outil de visualisation :<a href="https://bcujas-hoppe.univ-paris1.fr/"> https://bcujas-hoppe.univ-paris1.fr/</a></p> <p>Les données extraites du catalogue de la bibliothèque interuniversitaire Cujas (<a href="http://bcujas-catalogue.univ-paris1.fr">http://bcujas-catalogue.univ-paris1.fr</a>) concernent les « productions pédagogiques éditées » en droit francophone, sur une période courant de la réouverture des facultés de droit en 1804 jusqu’à la réforme de la licence en 1954.</p> <p>Le rapport scientifique de ce projet est disponible à l’adresse suivante : <a href="https://www.collexpersee.eu/wp-content/uploads/2021/07/Rapport_scientifique-HOPPE.pdf">https://www.collexpersee.eu/wp-content/uploads/2021/07/Rapport_scientifique-HOPPE.pdf</a></p> <p>Les données bibliographiques brutes extraites du catalogue Cujas ont fait l’objet d’opérations de tri, de dédoublonnage et d’enrichissements (indice de plan de classement, normalisation…) avant d’être importées dans une base Heurist structurée en 4 entités majeures : production pédagogique, auteur, éditeur, collection (les données de cette dernière sont en cours de traitement au 31/1/2022).</p> <p>La dernière étape de ce projet a été la mise en ligne d’un <a href="https://zenodo.org/record/5930198#.YffxE_jjKUl">outil de visualisation</a> développé en collaboration avec la société Ouestware.</p> <p>Les 3 jeux de données proposés au format csv sont issus de la base Heurist : productions pédagogiques (3348 items), auteurs (1180 items), éditeurs (207 items). Est également disponible au format xml l’export total de la base Heurist (algo_hoppe). Une version 2 enrichie des données de l’entité Collection viendra compléter ce dépôt courant 2022.</p> <p>Un plan de gestion des données sera également disponible au premier trimestre 2022 sur le site DMP-OPIdOR</p> <p>Les jeux de données sont encodés en UTF-8, au format CSV compatible avec les tableurs tels que ceux des suites LibreOffice, OpenOffice et Microsoft (après importation des données).</p> <p><em>In English</em></p> <p><em>The aim of the CollEx-Persée HOPPE-Droit project was to develop a tool for observing pedagogical productions in law that would allow the study, from a dynamic repertoire, of the evolution of French law and its teaching since the 19th century. It was the result of a partnership between the Cujas library, CERCRID and IRJS.</em></p> <p><em>Beginning in April 2019, it was completed in 2021 with the production of the visualization tool: <a href="http://bcujas-hoppe.univ-paris1.fr/">https://bcujas-hoppe.univ-paris1.fr/</a></em></p> <p><em>The data extracted from the catalog of the Cujas Inter-University Library (<a href="http://bcujas-catalogue.univ-paris1.fr">http://bcujas-catalogue.univ-paris1.fr</a>) concerns "published educational productions" in French-speaking law, over a period running from the reopening of law schools in 1804 until the reform of the license in 1954.</em></p> <p><em>The scientific report of this project is available at the following address: <a href="https://www.collexpersee.eu/wp-content/uploads/2021/07/Rapport_scientifique-HOPPE.pdf">https://www.collexpersee.eu/wp-content/uploads/2021/07/Rapport_scientifique-HOPPE.pdf</a></em></p> <p><em>The raw bibliographic data extracted from the Cujas catalog was sorted, deduplicated and enriched (classification plan index, normalization...) before being imported into a Heurist database structured in four major entities: educational production, author, publisher, collection (the data for the latter are being processed as of 31/1/2022).</em></p> <p><em>The last step of this project was the putting online of a <a href="https://zenodo.org/record/5930198#.YffxE_jjKUl">visualization tool</a> developed in collaboration with the company Ouestware.</em></p> <p><em>The three datasets proposed in csv format come from the Heurist database: educational productions (3348 items), authors (1180 items), publishers (207 items). The total export of the Heurist database (algo_hoppe) is also available in xml format. A version two enriched with the data of the collection entity will complete this repository during 2022.</em></p> <p><em>A data management plan will also be available in the first quarter of 2022 on the DMP-OPIdOR site</em></p> <p><em>The datasets are encoded in UTF-8, in CSV format compatible with spreadsheet programs such as those of the LibreOffice, OpenOffice and Microsoft suites (after data import).</em></p>
Phenology and production of pollen, nectar and sugar in 1612 plant species from various environments
<p>This dataset is related to the data paper published in Ecology: Filipiak et al, in press, <em>Phenology and production of pollen, nectar and sugar in 1612 plant species from various environments</em>; doi: to be provided when available. This paper must be always properly cited when using the database. Please use any scientific full citation format. <br> <br> <strong>Abstract</strong><br> To predict the quantity and quality of the food available for pollinators in various landscapes over time, it is necessary to collect detailed data on pollen, nectar, and sugar production per unit area and the flowering phenology of plants. Similar data are needed to estimate the contribution of plants to the functioning of food webs via the flow of energy and nutrients through the soil-plant-nectar/pollen-consumer pathway. Current knowledge on this topic is fragmented. This is the first database to compile data on the various food resources produced by 1612 different plant species, belonging to 755 genera and 133 families, including crops and wild plants, annuals and perennials, animal- and wind-pollinated plants, and weeds and trees growing in different ecosystems under various environmental conditions. The dataset consists of 103 parameters related to the traits of plant species, as well as to geographical and environmental factors, allowing for precise calculations of nectar, pollen and energy provided by plants and available to consumers in the considered flora or ecosystem on a daily basis throughout the year. These parameters, gathered by us and extracted from the available literature, describe pollen, nectar and sugar production (where applicable, in mass, volume and concentration units), honey yield, the timing and duration of flowering, flower longevity, numbers of plants and flowers per unit area, related weather conditions (temperature and precipitation), geographical location, landscape, and syntaxonomy. The data were obtained from various, mostly European, pedoclimatic zones, and the majority of the data were available for plant species and communities present in Central Europe, especially in Poland, where research on floral resources has a long tradition. These data are representative of the whole continent and may be used as a reference for plant communities occurring on continents other than Europe since the database allows the consideration of differences in the production of resources by a single plant species growing in different communities. This dataset provides a unique opportunity to test hypotheses related to the functioning of food webs, nutrient cycling, plant ecology, and pollinator ecology and conservation.</p>
Dataset for CoordiNet D6.2 - Chapter 4 - Evaluation of Combinations of Coordination Schemes and Products for Grid Services
<p>This is a supporting material for chapter 4 of CoordiNet D6.2. The deliverable is available at:</p> <p><a href="https://coordinet-project.eu/publications/deliverables">CoordiNet deliverables (coordinet-project.eu)</a></p> <p>The dataset is composed by an interconnected system consisting of the IEEE 14-bus (TN) transmission network connected to three distribution networks: the Matpower systems 18-bus (DN_18), 69-bus (DN_69), and 141-bus (DN_141). All systems topology and some parameters are based on the corresponding cases in Matpower [1]. Base demand is adapted from the case, while base generation profiles are added to all nodes. All distribution systems are balanced, and the transmission system is imbalanced. Thermal limits of the lines are adapted in order to create congestion in the systems. Each distribution system is connected to the transmission system through one line, which has capacity of 1.0. The interconnected system is fully represented in "Network.xlsx", in which:</p> <ul> <li>System: transmission (TN) or distribution (DN_18, DN_69, DN_141);</li> <li>LineID: ID of the lines;</li> <li>BusNumber: number of the nodes within the systems. This parameter is used to define the lines (from/to);</li> <li>BaseDemand and BaseSupply: base active demand and generation of each node;</li> <li>ConnectedDN: distribution system to which the transmission system node is connected to. If blank, the node is not connected to any distribution system. Only for the transmission system;</li> <li>InterfaceCapacity: thermal limit of the interface between the transmission and distribution systems;</li> <li>ThermalLimit: thermal limit of the transmission/distribution systems lines. For distribution systems, a value of 10 indicates that the line has no limit; </li> <li>SFTN: shift factor matrix of the transmission system. Capture the change in the active power flow over a line due to a change in injection or offtake at a node;</li> <li>BaseReactiveDemand and BaseReactiveSupply: base reactive demand and generation at each node. Only for distribution systems;</li> <li>VoltageLB and VoltageUB: lower and upper limits for the magnitude squared of the voltage in each distribution system node. Only for distribution systems;</li> <li>ConnectedTN: identify if the distribution node is connected or not to the transmission system. Only for distribution systems;</li> <li>ResistanceR: resistence of the distribution system lines. Only for distribution systems;</li> <li>ReactanceX: reactance of the distribution system lines. Only for distribution systems.</li> </ul> <p>Flexibility bids are randomly generated in the different nodes. For downward flexibility bids, the prices are drawn from the uniform distribution in the range 10 to 15, and for upward flexibility bids, they are drawn from the range 50 to 55. The bids maximum quantities are generated according to the base demand or supply of the node from which they are connected. The generated orderbook is presented in "OrderbookTN" (transmission system) and "OrderbookDN" (distribution systems):</p> <ul> <li>OrderID: the ID of the order, to make each order unique;</li> <li>System: the system (TN, DN_18, DN_69, DN_141) from which the order is offered;</li> <li>BusNumber: the node from which the order is offered;</li> <li>FlexibilitySense: UPWARD for increase in generation or decrease in demand; DOWNWARD for increase in demand or decrease in generation;</li> <li>Price: the submitted order price;</li> <li>Quantity: the maximum quantities of the order.</li> </ul> <p>In addition, table check_system contains the forecasted flows over lines before flexibility activation. For the transmission system, the SFTN is used and only active power is calculated. For the distribution systems, a linearized model of the power flow is used, thus active and reactive power are calculated:</p> <ul> <li>System: the system (TN, DN_18, DN_69, DN_141) where the line is located;</li> <li>From/to: bus numbers of the connection;</li> <li>Flow: forecasted active flow over transmission system lines;</li> <li>Flow P/Flow Q: forecasted active/reactive flow over distribution system lines (also for interface flows TN-DN);</li> <li>Congestion: if congestion is forecasted over the line.</li> </ul> <p>Source of the systems' topology:</p> <p>[1] R. D. Zimmerman, C. E. Murillo-Sanchez, and R. J. Thomas, “Mat-power: Steady-state operations, planning, and analysis tools for power systems research and education,” IEEE Transactions on power systems, vol. 26, no. 1, pp. 12–19, 2010.</p> <p>Please notice that this dataset does not replace the information provided by Matpower related to the aforementioned systems. It rather uses those systems topology and some of their parameters to build a case study to investigate TSO-DSO coordination market models for the procurement of flexibility. For the full description of these systems, please visit: <a href="https://matpower.org/">MATPOWER – Free, open-source tools for electric power system simulation and optimization</a>.</p>
Himawari 8 band 8 derived product for Lamb wave analysis
<p>Data from geostationary satellite Himawari 8 are processed for the analysis of Lamb waves that were generated by the eruption of Hunga Tonga-Hunga Haʻapai in Tonga on 15 January 2022. Himawari 8/9 gridded data are distributed by the Center for Environmental Remote Sensing (CEReS), Chiba University, Japan. The second time derivatives of band 8 thermal infrared images are stored. The used band was changed from version 1.</p> <p>The data format is NetCDF. The file name represents the date of the middle image used to generate each file (changed from version 2).</p>
FabWave Product Design Knowlsdge Graph (FPD-KG)
<p>FabWave Product Design Knowledge Graph: A Knowledge Graph for product design & manufacturing, constructed using the openly available and academia-sourced 3D CAD data. (Starly, Binil; Bharadwaj, Akshay; Angrish, Atin. (2019). FabWave CAD Repository Categorized Part Classes. 10.13140/RG.2.2.31167.87201.)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.