Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
12,346
datasets available to search
ShareScore release 0.9.0
Dataset results
12,346 results for “derivatives”
Landsat-Derived Global Irrigated-Cropland Product L2 2020 30 m V002
The Landsat-Derived Global Irrigated-Cropland Product Level 2 2020 (LGRIP30_L2_IRRI) Version 2 data provides high-resolution, 30 meter (m) cropland data to assist and address food and water security issues of the twenty-first century. As an extension of the Global Food Security-support Analysis Data ([GFSAD](https://www.usgs.gov/centers/western-geographic-science-center/science/global-food-security-support-analysis-data-30-m)) project, LGRIP_L2_IRRI V2 maps agricultural lands by dividing them into irrigated single crop, double crop, and continuous croplands, and calculates applicable cropland areas across the globe. LGRIP data are produced using Landsat 8 time-series satellite sensor data for the 2019 through 2021 time period to create a nominal 2020 product. Each LGRIP L2 Irrigated 30 m resolution GeoTIFF file contains a layer that identifies areas of irrigated cropland (cropland that had at least one irrigation during the crop growing period) divided into single, double, and continuous crop classifications, non-irrigated land (rainfed cropland and areas not classified as cropland), and water bodies over a 10° by 10° area, as well as an accuracy assessment of the product. A low-resolution browse image is also included. Currently, LGRIP30 V2 products only contain data for the conterminous United States (CONUS). LGRIP30 V2 data covering the rest of the globe will be added at a later date.Improvements/Changes from Previous VersionThere are three major goals in developing LGRIP30 V2:* The goal of LGRIP30 V2 is to overcome uncertainties present in [LGRIP30 V1](https://doi.org/10.5067/community/LGRIP/LGRIP30.001) and increase accuracies and reduce errors of omission and commission, thereby producing the most accurate high-resolution LGRIP30 product for the world. The LGRIP30 V2 is a significantly improved product. For more details see Section 3.1 of the User Guide.* LGRIP30 V2 is for the nominal year 2020; LGRIP30 V1 was for the nominal year 2015.* LGRIP30 V2 introduces Level 1 (L1) and Level 2 (L2) products to provide more detail for irrigated areas (IRRI) and rainfed (RAIN) areas. L1 data provides the greatest detail and classification for irrigated ([LGRIP30_L1_IRRI](https://doi.org/10.5067/Community/LGRIP/LGRIP30_L1_IRRI.002)) and rainfed ([LGRIP30_L1_RAIN](https://doi.org/10.5067/Community/LGRIP/LGRIP30_L1_RAIN.002)) croplands, while L2 data provides aggregated L1 data for irrigated (LGRIP30_L2_IRRI) and rainfed ([LGRIP30_L2_RAIN](https://doi.org/10.5067/Community/LGRIP/LGRIP30_L2_RAIN.002)) areas.
ABoVE: Passive Microwave-derived Annual Snowpack Main Melt Onset Date Maps, 1988-2023
This dataset provides the annual date of snowpack seasonal beginning melt (i.e., main melt onset date, MMOD) across northwest Canada, Alaska, US, and parts of far eastern Russia at 6.25-km resolution for the period 1988-2023. MMOD was derived from the daily 19V (K-band) and 37V (Ka-band) GHz bands from the Making Earth Science Data Records for Use in Research Environments (MEaSUREs) Calibrated Enhanced-Resolution Passive Microwave (PMW) EASE-Grid Brightness Temperature (Tb) Earth System Data Record (ESDR). The PMW MMOD dataset was validated using the transition date from Freeze Degree Days (FDD) to Thaw Degree Days (TDD) from in situ air temperature observations from 31 SNOw TELemetry network (SNOTEL) stations, and compared to an established Freeze-Thaw ESDR (FT-ESDR) spring onset date record. The resulting MMOD data record is suitable for documenting the spatial-temporal impacts of MMOD variability in ecosystem services, wildlife movements, and hydrologic processes within the ABoVE (Arctic Boreal Vulnerability Experiment) domain. The data from 1988-2016 included a coastal mask removing coastal pixels due to potential water contamination from coarse brightness temperature observations (Dersken et al., 2012). No coastal mask is used for the 2017-2023 data. The full data are included, and data users should be aware that values adjacent to large water bodies can be adversely affected.
Effects of Spaceflight on Human Induced Pluripotent Stem Cell-Derived Cardiomyocyte Structure and Function
With extended stays aboard the International Space Station (ISS) becoming commonplace there is a need to better understand the effects of microgravity on cardiac function. We utilized human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) to study the effects of microgravity on cell-level cardiac function and gene expression. The hiPSC-CMs were cultured aboard the ISS for 5.5 weeks and their gene expression structure and functions were compared to ground control hiPSC-CMs. Exposure to microgravity on the ISS caused alterations in hiPSC-CM calcium handling. RNA-sequencing analysis demonstrated 2,635 genes were differentially expressed among flight post-flight and ground control samples including genes involved in mitochondrial metabolism. This study represents the first use of hiPSCs to model the effects of spaceflight on human cardiomyocyte structure and function.
RLC AVHRR-Derived Land Cover, Former Soviet Union, Far East, 1-km, 1990
This data set is a 1-kilometer resolution land cover map for the land area of the Primor'ye and Southern Khabarovsk Regions, in the Russian Far East, based on 1990 NOAA AVHRR data. Labeling of land cover classes depended upon the Russian 1990 Forest Cover Map (Garsia, 1990), the analyst's experience with AVHRR data, and Russian data sources. There are eight classes distinguished in this dataset, of which 5 are forest cover classes.The objective of this work was to create a 1-km resolution land cover map of the region of the Far Eastern Siberia based on NOAA AVHRR data which might be used by World Wildlife Fund researchers to aid in the definition of remaining habitats and range for threatened animal species (Stone and Schlesinger, 1996).
Pre-Delta-X: UAVSAR-derived Water Level Change Maps, Atchafalaya Basin, LA, USA, 2016
This dataset contains five maps of cumulative changes in water levels at 30-minute intervals over a 150-minute period on 2016-10-16 in the Atchafalaya Basin in Southern Louisiana, USA, within the Mississippi River Delta (MRD) floodplain. Water surface elevations were measured on six flights at 30-minute intervals, with the Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR), a polarimetric L-band synthetic aperture radar (SAR) flown on the NASA Gulfstream-III aircraft. The five georeferenced maps at 6 m resolution show the cumulative change of water levels (cm) every 30 minutes relative to the first sampling flight. These Level 3 maps were generated using the InSAR time series Small Baseline Subsets (SBAS) algorithm implemented in the Generic InSAR Analysis Toolbox (GIAnT) toolbox and served to evaluate and compare hydrodynamic models.
STAQS AVIRIS-NG-derived Methane and Carbon Dioxide Plumes, 2023
This dataset contains enhanced column-integrated methane (CH4) and carbon dioxide (CO2) (concentration lengths) acquired from 211 flight lines across North America imaged by the Airborne Visible/Infrared Imaging Spectrometer-Next Generation (AVIRIS-NG) between June 26 and August 15, 2023 for NASA's Synergistic TEMPO Air Quality Science (STAQS) campaign. Enhanced CH4 and CO2 concentrations were estimated from the L1B radiance measurements using a cluster matched filter approach. This algorithm searches each pixel's radiance spectrum for deviations that are characteristic of a greenhouses gas's absorption spectrum. A total of 177 greenhouse gas plumes were identified and delineated, of which 74 were CH4 and 103 were CO2. The data are provided in GeoTIFF and JSON formats.
AfriSAR: Rainforest Canopy Height Derived from PolInSAR and Lidar Data, Gabon
This dataset provides estimates of forest canopy height and canopy height uncertainty for study areas in the Pongara National Park and the Lope National Park, Gabon. Two canopy height products are included: 1) Canopy height was derived from multi-baseline Polarimetric Interferometric Synthetic Aperture Radar (PolInSAR) data using an inversion of the random volume over ground (RVoG) model and Kapok, an open source Python library. 2) Canopy height was derived from a fusion of PolInSAR and Land, Vegetation, and Ice Sensor (LVIS) Lidar data. This dataset also includes various intermediate parameters of the PolInSAR data (including radar backscatter, coherence, and viewing and terrain geometry) which provide additional insight into the input data used to invert the RVoG model and accuracy of the canopy height estimates. The AfriSAR campaign was flown from 2016-02-27 to 2016-03-08. AfriSAR data were collected by NASA, in collaboration with the European Space Agency (ESA) and the Gabonese Space Agency.
CMS: LiDAR-derived Biomass, Canopy Height and Cover, Sonoma County, California, 2013
This data set provides estimates of above-ground biomass (AGB), canopy height, and percent tree cover at 30-m spatial resolution for Sonoma County, California, USA, for the nominal year 2013. Biomass estimates, megagrams of biomass per hectare (Mg/ha) were generated using a combination of LiDAR data, field plot measurements, and random forest modeling approaches. Estimates of AGB uncertainty are also provided. Maximum canopy height and tree cover were derived from LiDAR data and high-resolution National Agriculture Imagery Program (NAIP) images.
Greenland Ice Sheet Melt Characteristics Derived from Passive Microwave Data, Version 1
The Greenland ice sheet melt extent data, acquired as part of the NASA Program for Arctic Regional Climate Assessment (PARCA), is a daily (or every other day, prior to August 1987) estimate of the spatial extent of wet snow on the Greenland ice sheet since 1979. It is derived from passive microwave satellite brightness temperature characteristics using the Cross-Polarized Gradient Ratio (XPGR) of Abdalati and Steffen (1997). It is physically based on the changes in microwave emission characteristics observable in data from the Scanning Multi-channel Microwave Radiometer (SMMR) and the Special Sensor Microwave/Imager (SSM/I) instruments when surface snow melts. It is not a direct measure of the snow wetness but rather is a binary indicator of the state of melt of each SMMR and SSM/I pixel on the ice sheet for each day of observation. It is, however, a useful proxy for the amount of melt that occurs on the Greenland ice sheet. The data are provided in a variety of formats including raw data in ASCII format, gridded daily data in binary format, and annual and complete time series climatologies in gridded binary and GeoTIFF format. All data are in a 60 x 109 pixel subset of the standard Northern Hemisphere polar stereographic grid with a 25 km resolution and are available via FTP.
MODIS-derived Annual Vegetation Resilience, 2000-2019
This dataset provides estimates of vegetation resilience in the Arctic Boreal Vulnerability Experiment (ABoVE) core domain at annual time steps for 2000-2019 and at 300-m spatial resolution. Vegetation resilience is defined as the recovery rate from deviations, due to climate perturbations or disturbances, to the equilibrium state. It is quantified as the negative temporal lag-1 autocorrelation of Enhanced Vegetation Index (EVI). Using a time series of MODIS EVI, the vegetation resilience was estimated using a Bayesian dynamic linear model. The mapped vegetation resilience was derived from Terra EVI products (MOD13Q1v061) across 175 ABoVE B grid tiles over the ABoVE core domain. The estimated mean resilience, upper boundary, and lower boundary results are provided for each tile in cloud optimized GeoTIFF (COG) format.
Polar Stereographic Valid Ice Masks Derived from National Ice Center Monthly Sea Ice Climatologies, Version 1
These valid ice masks provide a way to remove spurious ice caused by residual weather effects and land spillover in passive microwave data. They are derived from the National Ice Center Arctic Sea Ice Charts and Climatologies data set and show where ice could possibly exist based on where it has existed in the past. There are 12 valid ice masks, one for each month, in netCDF-CF 1.6 compliant files with all associated metadata. The data are on a 304 x 448 grid and are available via FTP.
Sounder SIPS: AQUA AIRS IR-only Level 2: Atmospheric state at Standard Pressure Levels derived from CLIMCAPS V2.1 (SNDRAQIL2PLEVCPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) instrument aboard the Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This file contains the fixed Pressure Level product (PLEV) variables derived from the CLIMCAPS algorithm using data. They include including gas mixing ratio profiles, column totals, surface values, tropopause properties, and relative humidity, together with per-field quality flagging. The profiles are specified at the surface and layer boundaries and are estimated from layer amounts using the L2 algorithmAn AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
ABoVE: MODIS- and CCAN-Derived NDVI and Trends, North Slope of Alaska, 2000-2015
This dataset provides the average Normalized Difference Vegetation Index (NDVI) at 1-km resolution over the north slope of Alaska, USA, for the growing season (June-August) of each year from 2000-2015, and NDVI trends for the same period. The dataset presents growing-season averages and trends from two sources: 1) derived from 1-km, 8-day data from the Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI (MOD13A2) product, and 2) predicted by the Coupled Carbon and Nitrogen model (CCaN). CCaN is a mass balance carbon and nitrogen model that was driven by 1-km MODIS surface temperature and climate data for the North Slope of Alaska and parameterized using model-data fusion, where model predictions were ecologically constrained with historical ecological ground and satellite-based data.
Metop-A ASCAT Inter-Calibrated ESDR Level 2 Observed and Modeled Spatial Derivatives of Surface Wind and Wind Stress Version 1.0
This dataset contains the curl and divergence of ocean surface equivalent neutral wind and wind stress, derived from satellite-based scatterometer observations (the MetOp-A ASCAT scatterometer), representing the first science quality release of these data funded under the MEaSUREs program. This product from MetOp-A ASCAT has been intercalibrated with similar scatterometer measurements from instruments on the MetOp-B, ScatSat-1, and QuikScat satellites, all of which can be found on the MEaSUREs OSVW Project Page. These Level 2 data are provided on a non-uniform grid within the satellite swath at ~12.5 km pixel resolution. Each L2 file corresponds to a specific orbital revolution number, which begins at the southernmost point of the ascending orbit - the thumbnail preview shows data for all orbits over a day (typically 14 orbits). Estimates for the curls and divergences are computed over several spatial domains with varying radii from the point of interest, and included as separate variables.<br><br>The dataset represents the first science quality release funded under the MEaSUREs (Making Earth System Data Records for Use in Research Environments) program. The primary purpose of this release is for science evaluation by the NASA International Ocean Vector Winds Science Team (IOVWST). This V1.0 of the data was derived from V1.1 of the L2 wind and stress product.
EASE-Grid Land-Ocean-Coastline-Ice Masks Derived from Boston University MODIS/Terra Land Cover Data, Version 1
These Land-Ocean-Coastline-Ice (LOCI) files provide land classification masks derived from the Boston University MOD12Q1 V004 MODIS/Terra 1 km Land Cover Product (Friedl et al. 2002). The masks are available in various EASE-Grid azimuthal and global projections, at 12.5 km and 25 km spatial resolutions. The masks are in flat binary, 1 byte files stored by row. Quick-look browse images of the masks are also available in PNG (.png) format.
RLC AVHRR-Derived Land Cover, Former Soviet Union, 15-km, 1984-1993
This dataset is a 15-kilometer resolution land cover map for the land area of the Former Soviet Union. There are sixty land cover classes distinguished in this dataset, of which 38 are forest cover classes. The data set is useful for stratification of the FSU into general sub-regions of land cover for subsequent study using higher resolution satellite data.
AfriSAR: Canopy Cover and Vertical Profile Metrics Derived from LVIS, Gabon, 2016
This dataset includes footprint-level canopy structure products derived from data collected using NASA's Land, Vegetation, and Ice Sensor (LVIS) during flights over five forested sites in Gabon during February and March 2016. Three types of canopy structure information are included for each flight: 1) vertical profiles of canopy cover fraction in 1-meter bins, 2) vertical profiles of plant area index (PAI) in 1-meter bins, and 3) footprint summary data of total recorded energy, leaf area index, canopy cover fraction, and vertical foliage profiles in 10-meter bins. Canopy structure metrics are provided for each waveform (20-m footprint) collected by the LVIS instrument. These data were collected by NASA as part of the AfriSAR project. AfriSAR is a NASA collaboration with the European Space Agency (ESA), German Aerospace Center (DLR), and the Gabonese Space Agency (AGEOS) that is collecting data useful for deriving forest canopy structure and will help prepare for and calibrate current and upcoming spaceborne missions that aim to gauge the role of forests in Earth's carbon cycle.
Phenology derived from Satellite Data and PhenoCam across CONUS and Alaska, 2019-2020
This dataset provides a reference of land surface phenology (LSP) at 30-m pixels for 78 regions of 10 x 10 km2 across a wide range of ecological and climatic regions in North America during 2019 and 2020. The data were derived by fusing the Harmonized Landsat 8 and Sentinel-2 (HLS) observations with near- surface PhenoCam time series (hereafter called HP-LSP). The HP-LSP dataset consists of two parts: (1) the 3-day synthetic gap-free EVI2 (two-band Enhanced Vegetation Index) time series and (2) four key phenological transition dates that are greenup onset, maturity onset, senescence onset, and dormancy onset (accuracy less than or equal to five days). The PhenoCam network offers near-surface observations via the RGB (Red, Green, and Blue) imagery every 30 minutes. Each RGB imagery enables us to calculate as many as 100 Green Chromatic Coordinate (GCC) for generating a collection of localized vegetation dynamics. The HLS EVI2 time series with frequent gaps was fused with the most comparable PhenoCam GCC temporal shape selected from the GCC collection using the Spatiotemporal Shape Matching Model (SSMM) to create the synthetic gap-free HLS-PhenoCam EVI2 time series, which was used to establish the physically-based hybrid piecewise logistic model (HPLM) for detecting phenological transition dates (phenometrics).
EASE-Grid 2.0 Land Cover Classifications Derived from Boston University MODIS/Terra Land Cover Data, Version 1
These data provide land cover classifications derived from the Boston University MOD12Q1 V004 MODIS/Terra 1 km Land Cover Product (Friedl et al. 2002). The data are available in various EASE-Grid 2.0 azimuthal and global projections, in multiple spatial resolutions ranging from 3 km to 100 km. The data are in flat binary, 1 byte files that are stored by row.
LiDAR and PALSAR-Derived Forest Aboveground Biomass, Paragominas, Para, Brazil, 2012
This dataset provides estimates of forest aboveground biomass for three study areas and the entire Paragominas municipality, in Para, Brazil, in 2012. Aboveground biomass (in megagrams of carbon per hectare) was measured for inventory plots within the study (focal) areas, and then assimilated and modeled with LiDAR and PALSAR metrics using gradient boosting machines (GBM) to predict spatially explicit forest aboveground biomass and uncertainties for the entire focal areas. The PALSAR data across the three focal areas was combined and used in a GBM model to predict forest aboveground biomass across the entire Paragominas municipality.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.