Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,738
datasets available to search
ShareScore release 0.9.0
Dataset results
5,738 results for “Standards”
CALIPSO IIR Lidar Level 3 Global Energy and Water Cycle Experiment (GEWEX) Cloud, Standard V1-00
CAL_IIR_L3_GEWEX_Cloud-Standard-V1-00 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) IIR Level 3 Global Energy and Water Cycle Experiment (GEWEX) Cloud, Standard Version 1-00 data product. Data for this product was collected using the CALIPSO Imaging Infrared Radiometer (IIR) instrument.This product reports global distributions of IIR cloud effective radius, water path averages, and histograms on a uniform 2-dimensional (2D) spatial grid. This product is designed to follow the general guidance of the GEWEX Cloud Assessment. Cloud amount, radiative temperature, effective emissivity, and optical depth characterize the cloud samples for which IIR microphysical retrievals are reported. Cloud properties are reported for ice clouds, liquid water clouds, and high ice clouds of layer pressure lower than 440 hPa. All level 3 parameters are derived from the IIR version 4 level 2 track products, with the temporal extent averaging one month. CALIPSO was launched on April 28, 2006, to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in the international A-Train constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: The Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), Imaging Infrared Radiometer (IIR), and Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency, Centre National d'Etudes Spatiales (CNES).
Aquarius Official Release Level 3 Ancillary Reynolds Sea Surface Temperature Standard Mapped Image Ascending Annual Data V5.0
Aquarius Level 3 ancillary sea surface temperature (SST) standard mapped image data are the ancillary SST data used in the Aquarius calibration for salinity retrieval. They are simply the daily SSTs from the Reynolds National Climatic Data Center (NCDC) 0.25 degree dataset, gridded and averaged using the Aquarius processing L2-L3 processing scheme to the same 1 degree spatial resolution and daily, 7 day, monthly, Annual, and annual time intervals as Aquarius L3 standard salinity and wind speed products. This particular data set is the Annual, ascending ancillary sea surface temperature product associated with version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission.
Aquarius Official Release Level 3 Ancillary Reynolds Sea Surface Temperature Standard Mapped Image 7-Day Data V5.0
Aquarius Level 3 ancillary sea surface temperature (SST) standard mapped image data are the ancillary SST data used in the Aquarius calibration for salinity retrieval. They are simply the daily SSTs from the Reynolds National Climatic Data Center (NCDC) 0.25 degree dataset, gridded and averaged using the Aquarius processing L2-L3 processing scheme to the same 1 degree spatial resolution and daily, 7 day, monthly, 7-Day, and annual time intervals as Aquarius L3 standard salinity and wind speed products. This particular data set is the 7-Day ancillary sea surface temperature product associated with version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission.
Aquarius Official Release Level 3 Ancillary Reynolds Sea Surface Temperature Standard Mapped Image Seasonal Climatology Data V5.0
Aquarius Level 3 ancillary sea surface temperature (SST) standard mapped image data are the ancillary SST data used in the Aquarius calibration for salinity retrieval. They are simply the daily SSTs from the Reynolds National Climatic Data Center (NCDC) 0.25 degree dataset, gridded and averaged using the Aquarius processing L2-L3 processing scheme to the same 1 degree spatial resolution and daily, 7 day, monthly, seasonal, and annual time intervals as Aquarius L3 standard salinity and wind speed products. This particular data set is the seasonal climatology, ancillary sea surface temperature product associated with version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission.
Aquarius Official Release Level 3 Sea Surface Salinity Standard Mapped Image Ascending Monthly Climatology Data V5.0
Aquarius Level 3 sea surface salinity (SSS) standard mapped image data contains gridded 1 degree spatial resolution SSS averaged over daily, 7 day, monthly, and seasonal time scales. This particular data set is themonthly climatology, Ascending sea surface salinity product for version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission. Only retrieved values for Ascending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
OCO-2 Level 2 geolocated XCO2 retrievals results, physical model Retrospective Processing V11.2r (OCO2_L2_Standard) at GES DISC
Version 11.2r is the current version of the data set. Older versions will no longer be available and are superseded by Version 11.2r.The Orbiting Carbon Observatory is the first NASA mission designed to collect space-based measurements of atmospheric carbon dioxide with the precision, resolution, and coverage needed to characterize the processes controlling its buildup in the atmosphere. The OCO-2 project uses the LEOStar-2 spacecraft that carries a single instrument. It incorporates three high-resolution spectrometers that make coincident measurements of reflected sunlight in the near-infrared CO2 near 1.61 and 2.06 micrometers and in molecular oxygen (O2) A-Band at 0.76 micrometers. This collection is the output from the algorithm retrieving the column-averaged CO2 dry air mole fraction XCO2 and other quantities from the spectra collected by the Orbiting Carbon Observatory-2 (OCO-2).
Aquarius Official Release Level 3 Wind Speed Standard Mapped Image Ascending Daily Data V5.0
Aquarius Level 3 ocean surface wind speed standard mapped image data contains gridded 1 degree spatial resolution wind speed data averaged over daily, 7 day, monthly, and seasonal time scales. This particular data set is theDaily, Ascending wind speed product for version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission. Only retrieved values for Ascending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
AIRS/Aqua L3 Daily Standard Physical Retrieval (AIRS+AMSU) 1 degree x 1 degree V006 (AIRX3STD) at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. In combination with the Advanced Microwave Sounding Unit (AMSU) and the Humidity Sounder for Brazil (HSB), AIRS constitutes an innovative atmospheric sounding group of visible, infrared, and microwave sensors. The AIRS Level 3 Daily Gridded Product contains standard retrieval means, standard deviations and input counts. Each file covers a temporal period of 24 hours for either the descending (equatorial crossing North to South @1:30 AM local time) or ascending (equatorial crossing South to North @1:30 PM local time) orbit. The data starts at the international dateline and progresses westward (as do the subsequent orbits of the satellite) so that neighboring gridded cells of data are no more than a swath of time apart (about 90 minutes). The two parts of a scan line crossing the dateline are included in separate L3 files, according to the date, so that data points in a grid box are always coincident in time. The edge of the AIRS Level 3 gridded cells is at the date line (the 180E/W longitude boundary). When plotted, this produces a map with 0 degrees longitude in the center of the image unless the bins are reordered. This method is preferred because the left (West) side of the image and the right (East) side of the image contain data farthest apart in time. The gridding scheme used by AIRS is the same as used by TOVS Pathfinder to create Level 3 products. The daily Level 3 products have gores between satellite paths where there is no coverage for that day. The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
Aqua/AIRS L3 Monthly Standard Physical Retrieval (AIRS-only) 1 degree x 1 degree V7.0 at GES DISC
The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS Only Level 3 Monthly Gridded Retrieval Product contains standard retrieval means, standard deviations and input counts. Each file covers a calendar month. The mean values are simply the arithmetic means of the daily products, weighted by the number of input counts for each day in that grid box. The geophysical parameters have been averaged and binned into 1 x 1 deg grid cells, from -180.0 to +180.0 deg longitude and from -90.0 to +90.0 deg latitude. For each grid map of 4-byte floating-point mean values there is a corresponding 4-byte floating-point map of standard deviation and a 2-byte integer grid map of counts. The counts map provides the user with the number of points per bin that were included in the mean and can be used to generate custom multi-day maps from the daily gridded products. The thermodynamic parameters are: Skin Temperature (land and sea surface), Air Temperature at the surface, Profiles of Air Temperature and Water Vapor, Tropopause Characteristics, Column Precipitable Water, Cloud Amount/Frequency, Cloud Height, Cloud Top Pressure, Cloud Top Temperature, Reflectance, Emissivity, Surface Pressure, Cloud Vertical Distribution. The trace gases parameters are: Total Amounts and Vertical Profiles of Carbon Monoxide, Methane, and Ozone. The actual names of the variables in the data files should be inferred from the Processing File Description document.
Aquarius Official Release Level 3 Wind Speed Standard Mapped Image Daily Data V5.0
Aquarius Level 3 ocean surface wind speed standard mapped image data contains gridded 1 degree spatial resolution wind speed data averaged over daily, 7 day, monthly, and seasonal timescales. This particular data set is the Daily wind speed product for version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Deep Space Climate Observatory National Institute of Standards and Technology Advanced Radiometer Level 1B Radiance, Version 3
DSCOVR_NISTAR_L1B_3 is the Deep Space Climate Observatory (DSCOVR) National Institute of Standards & Technology Advanced Radiometer (NISTAR) Level 1B version 3 data product. NISTAR is a 4-band radiometer onboard the National Oceanic and Atmospheric Administration's (NOAA) DSCOVR spacecraft located at the Earth-Sun Lagrange-1 (L-1) point, from which vantage it continuously measures the reflected and emitted radiances of the sunlit face of the Earth. These measurements provide an accurate energy balance measurement that improves our understanding of the Earth's radiation budget.NISTAR employs three electrical substitution radiometers and a photodiode to measure reflected sunlight and infrared emission from the Earth. NISTAR measures the absolute irradiance integrated over the entire sunlit face of Earth in four broadband channels minute-by-minute. NISTAR has a 1º field of view (FOV), one large pixel encompassing the whole sunlit side of the Earth, and a 7º field of regard.The four measurement bands and their uses are: 1) Total Radiation – 0.2 µm to 100 µm: total radiant power in the UV, visible, and infrared wavelengths emerging from Earth.2) Total Solar Reflected – 0.2 µm to 4 µm: reflected solar radiance in UV, visible, and near-infrared wavelengths from Earth.3) Near Infrared Solar Reflected – 0.7 µm to 4 µm: reflected near-infrared solar radiation from Earth.4) Photodiode – 0.2 µm to 1.1 µm: tracks the stability of the filters and verifies co-alignment of NISTAR and EPIC.These Level 1B products are the irradiance values computed from Level 1A data collected while the instrument was aimed at the Earth. These data products are in HDF5 format.
Aquarius Official Release Level 3 Ancillary Reynolds Sea Surface Temperature Standard Mapped Image Annual Data V5.0
Aquarius Level 3 ancillary sea surface temperature (SST) standard mapped image data are the ancillary SST data used in the Aquarius calibration for salinity retrieval. They are simply the daily SSTs from the Reynolds National Climatic Data Center (NCDC) 0.25 degree dataset, gridded and averaged using the Aquarius processing L2-L3 processing scheme to the same 1 degree spatial resolution and daily, 7 day, monthly, Annual, and annual time intervals as Aquarius L3 standard salinity and wind speed products. This particular data set is the Annual ancillary sea surface temperature product associated with version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission.
Aquarius Official Release Level 3 Sea Surface Salinity Smoothed Standard Mapped Image Descending Monthly Data V5.0
Aquarius Level 3 sea surface salinity (SSS) standard mapped image data contains gridded 1 degree spatial resolution SSS averaged over daily, 7 day, monthly, and seasonal time scales. This particular data set is the Monthly, Descending sea surfacesalinity smoothed product for version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission. Only retrieved values for Descending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Aquarius Official Release Level 3 Rain-flagged Sea Surface Salinity Standard Mapped Image Descending Seasonal Climatology Data V5.0
Aquarius Level 3 sea surface salinity (SSS) rain-flagged standard mapped image data contains gridded 1 degree spatial resolution SSS averaged over daily, 7 day, monthly, andseasonal time scales. This particular data set is the seasonal climatology, Descending rain-flagged sea surface salinity product for version 5.0 of the Aquarius data set. Only retrieved values for Descending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Aquarius Official Release Level 3 Ancillary Reynolds Sea Surface Temperature Standard Mapped Image Descending 7-Day Data V5.0
Aquarius Level 3 ancillary sea surface temperature (SST) standard mapped image data are the ancillary SST data used in the Aquarius calibration for salinity retrieval. They are simply the daily SSTs from the Reynolds National Climatic Data Center (NCDC) 0.25 degree dataset, gridded and averaged using the Aquarius processing L2-L3 processing scheme to the same 1 degree spatial resolution and daily, 7 day, monthly, 7-Day, and annual time intervals as Aquarius L3 standard salinity and wind speed products. This particular data set is the 7-Day, descending ancillary sea surface temperature product associated with version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission.
Aquarius Official Release Level 3 Rain-flagged Sea Surface Salinity Standard Mapped Image Descending Seasonal Data V5.0
Aquarius Level 3 sea surface salinity (SSS) rain-flagged standard mapped image data contains gridded 1 degree spatial resolution SSS averaged over daily, 7 day, monthly, and seasonal timescales. This particular data set is the Seasonal, Descending rain-flagged rain-flagged sea surface salinity product for version 5.0 of the Aquarius data set. Only retrieved values for Descending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Standard Deviation of Monthly Frequency of Dust Storm over Land for Varying Intensities, Based on MODIS Terra Deep Blue Level 2 Aerosol Products MOD04_L2 Collection 6.1, on a Global 0.1 by 0.1 Degree Grid, Level 3 Version 1 (MODFDS_SDV_GLB_L3) at GES DISC
Version 1 is the current version of the dataset.This collection MODFDS_SDV_GLB_L3 provides level 3 standard deviation of climatological monthly frequency of dust storms (FDS) over land from 175°W to 175°E and 80°S to 80°N at a spatial resolution of 0.1˚ x 0.1˚. It is derived from Level 2, the Moderate Resolution Imaging Spectroradiometer (MODIS) Deep Blue aerosol products Collection 6.1 from Terra (MOD04_L2). The dataset is the standard deviation of climatological monthly mean for each month over 2000 to 2022.The FDS is calculated as the number of days per month when the daily dust optical depth is greater than a threshold optical depth (e.g., 0.025) with two quality flags: the lowest (1) and highest (3). It is advised to use flag 1, which is of lower quality, over dust source regions, and flag 3 over remote areas or polluted regions. Eight thresholds (0.025, 0.05, 0.1, 0.25, 0.5, 0.75, 1, 2) are saved separately in eight files.If you have any questions, please read the README document first and post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
Aquarius Official Release Level 3 Sea Surface Density Standard Mapped Image Ascending 28-Day Running Mean Data V5.0
Aquarius Level 3 sea surface density standard mapped image data contains gridded 1 degree spatial resolution density data averaged over daily, 7 day, monthly, and seasonal time scales. This particular data set is the 28-Day running mean, Ascending seasurface density product for version 5.0 of the Aquarius data set. Only retrieved values for Ascending passes have been used to create this product. Surface density estimates are based on TEOS-10 and derived using retrieved salinity from Aquarius and collocated ancillary SST (Reynolds OI 0.25 degree product). The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Aquarius Official Release Level 3 Sea Surface Density Standard Mapped Image Seasonal Climatology Data V5.0
Aquarius Level 3 sea surface density standard mapped image data contains gridded 1 degree spatial resolution derived density averaged over daily, 7 day, monthly, and seasonal time scales. This particular data set is the seasonal climatology, sea surface densityproduct for version 5.0 of the Aquarius data set, which is the official end of mission public data release from the AQUARIUS/SAC-D mission. Surface density estimates are based on TEOS-10 and derived using retrieved salinity from Aquarius and collocated ancillary SST (Reynolds OI 0.25 degree product). The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
Aquarius Official Release Level 3 Rain-flagged Sea Surface Salinity Standard Mapped Image Descending 28-Day Running Mean Data V5.0
Aquarius Level 3 sea surface salinity (SSS) rain-flagged standard mapped image data contains gridded 1 degree spatial resolution SSS averaged over daily, 7 day, monthly, and seasonaltime scales. This particular data set is the 28-Day running mean, Descending rain-flagged rain-flagged sea surface salinity product for version 5.0 of the Aquarius data set. Only retrieved values for Descending passes have been used to create this product. The Aquarius instrument is onboard the AQUARIUS/SAC-D satellite, a collaborative effort between NASA and the Argentinian Space Agency Comision Nacional de Actividades Espaciales (CONAE). The instrument consists of three radiometers in push broom alignment at incidence angles of 29, 38, and 46 degrees incidence angles relative to the shadow side of the orbit. Footprints for the beams are: 76 km (along-track) x 94 km (cross-track), 84 km x 120 km and 96km x 156 km, yielding a total cross-track swath of 370 km. The radiometers measure brightness temperature at 1.413 GHz in their respective horizontal and vertical polarizations (TH and TV). A scatterometer operating at 1.26 GHz measures ocean backscatter in each footprint that is used for surface roughness corrections in the estimation of salinity. The scatterometer has an approximate 390km swath.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.