Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

8,921

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

8,921 results for “field”

Learn how ShareScore rates datasets ↗
zenodo44/100

GATEMAN project -- D8.2 -- Field experiments raw data

<p>This dataset contains a .zip file (RawData.zip) with some of the raw files recorded during the&nbsp;open-field experimentation campaign in the frame of the GATEMAN project. These files are grouped for each type of validation scenario defined. The scenarios are separated in jamming and spoofing cases (JAM:Jamming, SPO:Spoofing)&nbsp;and classified according to the zone (Z1: Zone 1, Z2: Zone 2)&nbsp;and the vehicle motion&nbsp;(S:Static, D:Dynamic).</p> <p>Also the reference document of the deliverable D8.2 is included here.</p> <p><strong>Dataset Structure:</strong></p> <p>├── <strong>Jamming</strong><br> &nbsp; &nbsp; ├── OF-JAM-Z2-D-Test 11<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;└── Test_11.bin<br> &nbsp; &nbsp; ├──&nbsp;OF-JAM-Z2-D-Test 12<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;└── Test_12.bin</p> <p>&nbsp; &nbsp; ├--─&nbsp;OF-JAM-Z2-D-Test 13<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;└── Test_13.bin<br> &nbsp; &nbsp; &nbsp;├── GNURadio<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── SingleTone.grc</p> <p>├── <strong>Spoofing</strong><br> &nbsp; &nbsp;├── OF-SPO-Z2-S-Test 1<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test1.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test1.sbf</p> <p>&nbsp;├── OF-SPO-Z2-S-Test 5<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test5.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test5.sbf</p> <p>&nbsp;├── OF-SPO-Z2-D-Test 2<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test2.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test2.sbf</p> <p>&nbsp;├── OF-SPO-Z2-D-Test 4<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test4.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test4.sbf</p> <p>&nbsp;├── OF-SPO-Z2-D-Test 6<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test6.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test6.sbf</p> <p>&nbsp;├── OF-SPO-Z1-D-Test 29<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Master_Test29.sbf<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Slave_Test29.sbf</p> <p>&nbsp;├── GNURadio<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └── Scenario1_decimated.iq<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;PreProcessing.grc<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; └──&nbsp;Signal_to_Usrp.grc</p> <p>&nbsp;</p>

opencc-by-4.0Nov 2019View details →
zenodo44/100

Observations of Diurnal Coastal-Trapped Waves with a Thermocline-Intensified Velocity Field

<p>Repository for the data presented in the&nbsp;JPO 2019&nbsp;article: &quot;Observations of Diurnal Coastal-Trapped Waves with a Thermocline-Intensified Velocity Field&quot;. Observations were compared against output from Ken Brink&#39;s model.&nbsp;The model is available from:&nbsp;<a href="https://darchive.mblwhoilibrary.org/handle/1912/10527">https://darchive.mblwhoilibrary.org/handle/1912/10527</a>.</p>

opencc-by-4.0May 2019View details →
zenodo44/100

Data from "Predicting Global Ground Geoelectric Field With Coupled Geospace and Three‐Dimensional Geomagnetic Induction Models"

<p>Data presented in http://dx.doi.org/10.1029/2018SW001859 excluding the first and last hours which were determined to contain partially unphysical results and probably should not be used.</p> <p>Each file contains the external ground magnetic field components calculated on 5x5 degree geographic grid and the results of induction modeling using 1d and 3d ground conductivity models: total ground magnetic field components, horizontal ground electric field components. Times are given in UTC.</p> <p>To reproduce Figure 8 in above reference use:</p> <p>&nbsp;</p> <p>import numpy<br> import matplotlib.pyplot<br> data = numpy.load(&#39;2006-12-14T22:58:00.npz&#39;) # or 2006-12-14T22_58_00.npz<br> matplotlib.pyplot.colorbar(<br> &nbsp;&nbsp; &nbsp;matplotlib.pyplot.imshow(<br> &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;data[&#39;B_3D_north&#39;],<br> &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;cmap = matplotlib.pyplot.get_cmap(&#39;bwr&#39;),<br> &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;vmin = -800, vmax = 800,<br> &nbsp;&nbsp; &nbsp;&nbsp;&nbsp; &nbsp;extent = (-180, 180, -90, 90)<br> &nbsp;&nbsp; &nbsp;),<br> &nbsp;&nbsp; &nbsp;format = &#39;%.0f&#39;, fraction = 0.02, pad = 0.03<br> )<br> matplotlib.pyplot.show()</p> <p>&nbsp;</p> <p>and substitute B_3D_east, E_3D_north, etc. for the different panels.</p>

opencc-by-4.0Jul 2018View details →
zenodo44/100

Source data for "Synthetic gauge fields for phonon transport in a nano-optomechanical system"

<ul> <li>Experimental raw data for&nbsp;density plots in Fig 2. Each .csv contains an array, where 1st row corresponds to x_axis (mechanical frequency in MHz for panels 1,2,3,4) and first column the y_axis (optical frequency in THz for panel 1, modulation frequency in MHz for panels 2,3,4). First nonzero component is the 2nd for each array. Remaining array elements contain the z values (Thermomechanical noise spectral for panel 1, Amplitude of driven responses for panels 2,3,4). An illustrative example of plotting in an ipython notebook&nbsp;follows:</li> </ul> <p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;%pylab inline</p> <p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; A= genfromtxt(&#39;Fig2_data_modVolt=0mV_experiment.csv&#39;, delimiter=&#39;,&#39;)&nbsp; &nbsp;</p> <p>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; x = A[0,1:]<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; y = A[1:,0]<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; z = A[1:,1:]<br> &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; imshow(z,aspect=&#39;auto&#39;,vmin=z.min(),vmax=z.max(),extent=[x.min(),x.max(),y.min(),y.max()],cmap=&#39;magma&#39;)&nbsp;</p> <ul> <li>&nbsp; &nbsp;Theoretical data for panel 4&nbsp;in Fig 2, stored in a .csv with the same structure as previous.</li> <li>&nbsp; &nbsp;Raw experimental&nbsp;data for upper panels in&nbsp;Fig&nbsp;3.&nbsp;Each .csv contains an array where 1st row corresponds to x_axis (modulation phase) and first column the y_axis (optical frequency in THz). Z values contain the experimental signal proportional to the Y optical quadrature of the transferred mode.</li> <li>Theoretical data for lower panels in Fig&nbsp;3, stored in a .csv with the same structure as previous.</li> <li>Jupyter notebook to produce and plot typical data for Fig 4: phononic amplitude&nbsp;averaged over 100 disorder realizations, normalized to the maximum value&nbsp;(*extra_dependencies: Kwant Python library:&nbsp;<a href="https://kwant-project.org/">https://kwant-project.org/</a>).</li> </ul>

opencc-by-4.0Nov 2019View details →
zenodo44/100

3D displacement field and fault-offset measurements for the northern Kaikōura ruptures

<p>Contents:</p> <p>1. East, north and vertical components of the co-seismic displacement field for three faults (the Kekerengu, Jordan and Upper Kowhai faults) that ruptured in the 2016 Kaikoura earthquake, New Zealand (east.tif, north.tif, vertical.tif).</p> <p>2. Shapefiles containing&nbsp;offsets across the faults of interest, measured from the displacement field (shapefiles.zip).</p> <p>3. CSV files&nbsp;containing&nbsp;offsets across the faults of interest, measured from the displacement field (csvs.zip).&nbsp;</p> <p>Our methodology is described in the following manuscript:</p> <p>Howell et al., 2019.&nbsp;3D surface displacements during the 2016 MW 7.8 Kaikōura earthquake (New Zealand) from photogrammetry-derived point clouds, Journal of Geophysical Research Solid Earth, submitted.</p>

opencc-by-4.0Dec 2019View details →
zenodo44/100

The first geospatial dataset of irrigated fields (2020-2024) in Vojvodina (Serbia)

<p><span>Irrigation is a cornerstone of global food security, enabling sustainable agricultural production and helping to ensure that food is available for people around the world, now and in the future. Mapping irrigated fields provides valuable information for sustainable water management, agricultural development, and environmental conservation efforts. However, the collection of high-quality training data, which is necessary for accurate irrigation mapping remains costly and labour-intensive. To address this, we created a georeferenced regional dataset consisting of location, crop type, and occurrence of the irrigation equipment which are essential information for mapping irrigated fields. Four main irrigated crops were considered: maize, soybean, sugar beet, and wheat. The dataset<span>,</span> consisting of a total of 1256 parcels<span>,</span> is created for Vojvodina, the main agricultural area in Serbia, spanning the period of five years (2020 - 2024). This study&rsquo;s goal is to give accessibility to our dataset which further can be explored and used for building or fine-tuning machine learning and deep learning models for the automatic detection of irrigated fields using satellite imagery.</span></p>

opencc-by-4.0Jul 2024View details →
zenodo44/100

The Time Variable Ionospheric Electric Field (TiVIE) Model Outputs v 1.0

<p>These are the outputs for the TiVIE model v 1.0 produced by Maria-Theresia Walach, Lancaster University for the publication Walach, M.-T., and Grocott, A. (submitted 2024).&nbsp;</p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

Data supporting publication: Revealing Mode Formation in Quasi-Bound States in the Continuum Metasurfaces via Near-Field Optical Microscopy

<p>This repository includes the data corresponding to the figures shown in the journal article entitledRevealing Mode Formation in Quasi-Bound States in the Continuum Metasurfaces via Near-Field Optical Microscopy, published in Advanced Materials on 02.08.2024</p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

Magnetic Field Measurements above a Phonolite Diatreme near Rockeskyll, West Eifel, Germany

Open the record for dataset details and reuse information.

opencc-by-4.0Aug 2024View details →
zenodo44/100

OME-Zarr 3D hiPSCs with 3D labels & 3D measurements, 2x2 field of views

<p>These are 2 small OME-Zarr files of the data from&nbsp;<a href="../records/7057076">10.5281/zenodo.7057076</a>.</p> <p>The images have been processed using <a href="https://fractal-analytics-platform.github.io/">Fractal</a>, the workflow is attached as a json file. It ran with fractal-server==2.3.6, fractal-client==2.0.1, fractal-web==1.4.0 and fractal-tasks-core==1.2.1.</p> <p>Both Zarr files are Zip-compressed to allow easier upload &amp; download from Zenodo.&nbsp;</p> <p>20200812-CardiomyocyteDifferentiation14-Cycle1.zarr contains 3 3D channels, a nuclear segmentation produced by&nbsp;<a href="https://cellpose.readthedocs.io/en/latest/">cellpose</a> as labels and 4 tables: A ROI table for the whole well, a ROI table for the 4 field of views, a masking ROI table for the nuclear segmentation, as well as measurements performed with <a href="https://github.com/haesleinhuepf/napari-skimage-regionprops">napari-skimage-regionprops</a>.</p> <p>20200812-CardiomyocyteDifferentiation14-Cycle1_mip.zarr contains the same 3 channels, but as maximum intensity projections. It contains nuclear segmentation through cellpose, as well as 3 more labels generated by napari workflows (different thresholds, less accurate segmentations). It also contains 7 tables: The region of interests like in the 3D data, as well as measurements performed with <a href="https://github.com/haesleinhuepf/napari-skimage-regionprops">napari-skimage-regionprops</a>.</p> <p>The tables are stored in the OME-Zarr file according to the <a href="https://fractal-analytics-platform.github.io/fractal-tasks-core/tables/">Fractal table specification</a>&nbsp;spec in AnnData.</p> <p>The 3 channels are:</p> <p>- 0: DAPI, nuclear stain</p> <p>- 1: nanog, antibody staining with&nbsp;Bio-Techne AG, AF1997-SP, Lot&nbsp;KKJ0617121 for the stemness marker nanog</p> <p>- 2: Lamin B1, antibody staining with Abcam, ab16048, Lot GR3244890-2 for the nuclear envelope marker Lamin B1</p>

opencc-by-4.0Feb 2023View details →
zenodo44/100

A New Spherical Light Field Database for Immersive Telecommunication and Telepresence Applications

<p>This database is created by the Realistic 3D research group at Mid Sweden University, Sundsvall, Sweden. The database details are explained thoroughly in the publication which was published at the 16th International Conference on Quality of Multimedia Experience (QoMEX) in 2024. This database was also reviewed as part of the submission and publication process.</p> <p>You can use this database in your work under the Creative Commons Attribution 4.0 International (CC-BY 4.0) licence, provided that you cite the database as below:</p> <blockquote> <p>Zerman, E., Gond, M., Takhtardeshir, S., Olsson, R., &amp; Sj&ouml;str&ouml;m, M. (2024). A Spherical Light Field Database for Immersive Telecommunication and Telepresence Applications. <em>The 16th International Conference on Quality of Multimedia Experience (QoMEX)</em>. IEEE. DOI: <a href="https://ieeexplore.ieee.org/abstract/document/10598264">10.1109/QoMEX61742.2024.10598264</a></p> </blockquote> <p>BibTeX:</p> <blockquote> <p>@inproceedings{zerman2024spherical,<br>&nbsp; title &nbsp; &nbsp; &nbsp; &nbsp;= {A Spherical Light Field Database for Immersive Telecommunication and Telepresence Applications},<br>&nbsp; author &nbsp; &nbsp; &nbsp; = {Zerman, Emin and Gond, Manu and Takhtardeshir, Soheib and Olsson, Roger and Sj{\"o}str{\"o}m, M{\aa}rten},<br>&nbsp; booktitle &nbsp; &nbsp;= {The 16th International Conference on Quality of Multimedia Experience (QoMEX)},<br>&nbsp; year &nbsp; &nbsp; &nbsp; &nbsp; = {2024},<br>&nbsp; organization = {IEEE},<br>&nbsp; doi &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;= {10.1109/QoMEX61742.2024.10598264}<br>}</p> </blockquote> <p>This database contains 20 spherical light fields of 1 x 60 views, captured with a consumer-grade 360-degree camera: Insta360 X3. The capture was done using a dolly to ensure the separation between consecutive views is exactly 1 cm. In addition to the original captures, this database also provides outputs for two different use cases: compression and view synthesis. Several parameters, features, and objective quality metric values are also included.</p> <p>N.B. Only the README file and this description have been updated after the initial submission on 2024-02-09.</p>

opencc-by-4.0Feb 2024View details →
zenodo44/100

On the mixing between flavor singlets in lattice gauge theories coupled to matter fields in multiple representations - data release

<p>This release contains all data and metadata used to prepare the publication <a href="https://arxiv.org/abs/2405.05765"><em>On the mixing between flavor singlets in lattice gauge theories coupled to matter fields in multiple representations</em> [2405.05765].</a>&nbsp;</p> <p>If you encounter difficulties downloading the large files, we recommend using <a href="../records/11142962">zenodo-get</a>. This provides a command-line downloader for any Zenodo record. For unstable connections we recommend using it with the -w flag to generate a list all files in this Zenodo record. This can then be used with tools such as&nbsp;<a href="https://www.gnu.org/software/wget/">wget</a> to resume partial downloads as</p> <p><code>zenodo_get RECORD_ID_OR_DOI -w - | xargs wget -c<br>zenodo_get RECORD_ID_OR_DOI </code></p> <p>(The second line ensures that the downloads completed correctly, and that the md5 hashes match)<br><br>Further details are given in the file README.md.</p> <p>The work of EB and BL is supported in part by the EPSRC ExCALIBUR programme ExaTEPP (project EP/X017168/1). The work of EB, BL, MP, and FZ has been supported by the STFC Consolidated Grant No. ST/X000648. The work of EB has also been supported by the UKRI Science and Technology Facilities Council (STFC) Research Software Engineering Fellowship EP/V052489/1. The work of NF has been supported by the STFC Consolidated Grant No. ST/X508834/1. The work of DKH was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education&nbsp;&nbsp; (NRF-2017R1D1A1B06033701). The work of DKH was further supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (2021R1A4A5031460). The work of JWL is supported by IBS under the project code, IBS-R018-D1. The work of HH and CJDL is supported by the Taiwanese MoST grant 109-2112-M-009-006-MY3 and NSTC grant 112-2112-M-A49-021-MY3. The work of CJDL is also supported by Grants No. 112-2639-M-002-006-ASP and No. 113-2119-M-007-013. The work of BL and MP has been further supported in part by the STFC &nbsp;Consolidated Grant No. ST/T000813/1.<br>BL and MP received funding from the European Research Council (ERC) under the European Union&rsquo;s Horizon 2020 research and innovation program under Grant Agreement No.~813942. The work of DV is supported by STFC under Consolidated Grant No. ST/X000680/1.</p> <p>Numerical simulations have been performed on the DiRAC Extreme Scaling service at the University of Edinburgh, and on the DiRAC Data Intensive service at Leicester.<br>The DiRAC Extreme Scaling service is operated by the Edinburgh Parallel Computing Centre on behalf of the STFC DiRAC HPC Facility (www.dirac.ac.uk). This equipment was funded by BEIS capital funding via STFC capital grant ST/R00238X/1 and STFC DiRAC Operations grant ST/R001006/1. DiRAC is part of the National e-Infrastructure</p>

opencc-by-4.0May 2024View details →
zenodo44/100

Data supporting publication: Nanoscale Mechanical Manipulation of Ultrathin SiN Membranes Enabling Infrared Near-Field Microscopy of Liquid-Immersed samples

<p>This repository includes the data corresponding to the figures shown in the journal article entitled Nanoscale Mechanical Manipulation of Ultrathin SiN Membranes Enabling Infrared Near-Field Microscopy of Liquid-Immersed samples, published in small.&nbsp;</p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

Data for: Multi-year field measurements of home storage systems and their use in capacity estimation

<p>The dataset accompanies the Nature Energy publication by Figgener et al. (2024), Multi-year field measurements of home storage systems and their use in capacity estimation, <a href="https://doi.org/10.1038/s41560-024-01620-9">DOI 10.1038/s41560-024-01620-9</a>.&nbsp;<br><br>In addition, we use the dataset in Figgener et al. (2024), Degradation mode estimation using reconstructed open circuit voltage curves from multi-year home storage field data, <a href="https://doi.org/10.48550/arXiv.2411.08025">DOI 10.48550/arXiv.2411.08025</a></p> <p>The ISEA / CARL of RWTH Aachen University measured 21 private home storage systems in Germany over up to eight years from 2015 to 2022. All these storage systems are combined with residential photovoltaic systems to increase self-consumption. The measured quantities published are system-level battery current, voltage, power, battery pack housing temperature, and room temperature. The sample rate is one second. The dataset consists of 106 system years, 14 billion data points, and 1,270 monthly files stored in 21 system folders.&nbsp;</p> <p>Use the data as follows:<br><br>1. Download the data (Data_ID_01.zip to Data_ID_21.zip) and the belonging repository (Metadata_and_Code.zip)</p> <p>2. Uncompress the files so that the uncompressed folders have the same name as the .zip files.</p> <p>3. Copy all data folders in folder "Metadata_and_Code/00_Data/01_Operational_Data". Read and execute the file "StartUp_Read_and_Execute.m" and stay in this folder for any script you execute.&nbsp;</p> <p>In addition, a detailed description of the dataset and how to use it can be found in the supplementary information of the publication.</p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

BepiColombo magnetic field data (MPO-MAG) from the two Venus flybys

<p>&nbsp;</p> <p>Vector magnetic field data from the first two Venus flybys (highres and 1-sec res).</p> <p>*Data will be properly archived on ESA's PSA, once the data has been finalized and/or cleaned*</p> <p>Reference frame: VSO</p> <p>Trajectory information is also included.&nbsp;</p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

Prey nutrient content is associated with the trophic interactions of spiders and their prey selection under field conditions

<h2>Materials and Methods</h2> <h2><a name="_Toc58843581"></a><em><span>Fieldwork</span></em></h2> <p><a name="_Hlk173879015"></a><a name="_Hlk56335325"></a><span><span>Money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae), the two most abundant spider groups in this study, were visually located along transects in two adjacent barley fields at Burdons Farm, Wenvoe in South Wales (51&deg;26'24.8"N, 3&deg;16'17.9"W) and collected from occupied webs and the ground in daylight hours between April and September 2018. Each belt transect was adjacent to a randomly selected crop tramline and were distributed across the entire field and ran its length. The areas searched were 4 m<sup>2</sup> quadrats at least 10 m apart and all observed linyphiids and lycosids were collected. The 300 spiders taken forward for molecular dietary analysis in this study were taken from 64 randomly selected locations along the aforementioned transects. </span></span><span><span>Following collection of spiders, 4 m<sup>2</sup> of ground and crop stems was suction sampled <a name="_Hlk173879230"></a>in each of these 64 sampling locations for approximately 30 seconds, with the collected material emptied into a bag and any organisms immediately killed with ethyl-acetate. Suction sampling used a &lsquo;G-vac&rsquo; modified garden leaf-blower. All material was later frozen at -20 &ordm;C for storage before sorting in the lab. Sticky trap data were also collected, but were not used in this study as suction sampling was found to represent the interactions of spiders more closely (Cuff, Tercel et al., 2024). These invertebrates were collected for background population densities and macronutrient analysis, not for molecular dietary analysis.</span></span></p> <p><span>All invertebrates were identified to family level using morphological keys: Araneae </span><span><span>(Roberts, 1993)</span></span><span>, Diptera </span><span><span>(Ball, 2008)</span></span><span>, Coleoptera </span><span><span>(Duff, 2012)</span></span><span>, Hymenoptera </span><span><span>(Goulet &amp; Huber, 1993)</span></span><span>, Hemiptera </span><span><span>(Unwin, 2001)</span></span><span>, Collembola </span><span><span>(Dallimore &amp; Shaw, 2013)</span></span><span> and Chilopoda </span><span><span>(Barber, 2008)</span></span><span>. Further identifications were not carried out due to the inability to identify some of the invertebrate groups further via the associated metabarcoding-derived dietary data (e.g., Sciaridae), and the difficulty associated with finer taxonomic resolution of many damaged or immature specimens. The only taxa not identified to family level were springtails of the superfamily Sminthuroidea (Sminthuridae and Bourletiellidae, which were often indistinguishable following suction sampling and preservation due to the fine features necessary to differentiate them) which were left at super-family, mites (many of which were immature or in poor condition, or lacked appropriate taxonomic keys) which were identified to order level and wasps of the superfamily Ichneumonoidea (which were identified no further due to obscurity of wing venation due to damage); in these cases, these taxonomic assignments were pooled to family-level for later analyses. <a name="_Hlk96098198"></a></span></p> <p><span><span>Extraction, amplification and sequencing of DNA from the individually collected spiders, and its bioinformatic analysis are described by </span></span><span><span><span>Cuff, Tercel, et al. (2022)</span></span></span><span><span> and </span></span><span><span><span>Drake et al. (2022)</span></span></span><span><span> and are also detailed in Supplementary Information 1. In short, dietary metabarcoding was carried out using two primer pairs, one excluding predator DNA and the other amplifying it, to overcome the problem of overamplification of predator DNA </span></span><span><span><span>(Cuff, Kitson, et al., 2023)</span></span></span><span><span>. Amplified DNA was sequenced on an Illumina MiSeq V3 2x300 cartridge, and resultant data screened for false positives following bioinformatic processing via minimum sequence copy thresholds applied according to read counts in controls and control DNA counts present in samples </span></span><span><span><span>(Drake et al., 2022)</span></span></span><span><span>.</span></span></p> <p><span>&nbsp;</span></p> <h2><a name="_Toc58843582"></a><em><span>Macronutrient determination</span></em></h2> <p><span>Specimens were taken for macronutrient analysis from the same suction samples collected for invertebrate community identification. Representatives were taken from each family found in the community samples for which specimens were intact, in visually good condition and relatively clean of soil and other contaminants. If specimens were from a relatively uncommon family but unclean, soil and other surface contaminants were physically removed, and the specimen then momentarily dipped in water to remove remaining surface contaminants without greatly dislodging surface lipids. <a name="_Hlk173879439"></a>Macronutrient contents were determined following the MEDI protocol </span><span><span><span>(Cuff, Wilder, et al., 2021; Cuff &amp; Wilder, 2021)</span></span></span><span><span> with minor alterations to account for the small size of most of the invertebrates processed </span></span><span><span><span>(Cuff, 2021)</span></span></span><span><span> and with the omission of exoskeletal measurement. </span></span><span>During extraction, half volumes (i.e., 500 &micro;l) of solvents were used. For the lipid assays, 15 &micro;l of sulfuric acid was added for a 15 min incubation, followed by only 200 &micro;l of vanillin reagent to increase the concentration and development of analyte for more accurate readings from smaller invertebrates. Lipid and protein standard series were diluted to 50% of the concentration specified in the original protocol (i.e., 0-1 mg ml<sup>-1</sup>). Carbohydrate assays used 140 &micro;l of reagent with 30 min incubation at 92 &deg;C followed by a further 30 min at room temperature. Carbohydrate standard series were diluted to 1 % of the concentrations specified in the original protocol (i.e., 0-0.02 mg ml<sup>-1</sup>) to ensure signals overcame the higher limit of detection relative to typical invertebrate carbohydrate content. <span>&nbsp;</span><a name="_Hlk173926384"></a>Mean macronutrient contents were calculated for each taxon and converted into proportions of the total macronutrient mass detected for each taxon (i.e., macronutrient values are given as % total macronutrient mass). Macronutrient data were allocated to each prey taxon. Where macronutrient data were not available for a family (due to no or very few individuals being present in vacuum samples), average data for that order were used.</span></p> <p><span>&nbsp;</span></p> <h2><a name="_Toc58843584"></a><em><span>Statistical analysis</span></em></h2> <p><span>We have assessed nutritional dynamics through a combination of multivariate models and network-based null modelling. All analyses were conducted in R v.4.0.3 </span><span><span>(R Core Team, 2020)</span></span><span>. </span></p> <p><span>To compare the nutritional balance of prey consumed by different spider groups, the mean nutrient contents of all prey consumed by each spider were calculated and compared using a multivariate linear model (MLM) via the &lsquo;manylm&rsquo; command in mvabund </span><span><span>(Wang et al., 2012)</span></span><span>.<span> </span><span>Differences were visualised using ternary plots via &lsquo;ggtern&rsquo; </span></span><span><span>(Hamilton &amp; Ferry, 2018)</span></span><span> and &lsquo;ggplot2&rsquo; </span><span><span>(Wickham, 2016)</span></span><span>. How spider diets differ between spider groups (genera, sexes and life stages) and how this is related to the nutrient contents of those prey was assessed using a fourth corner analysis (FCA). Fourth corner analyses assess how the relationship between the presence of species (or consumed resources in a dietary context) and environmental (or consumer) traits relates to species traits (or prey traits; </span><span><span>(Brown et al., 2014)</span></span><span>. </span><span>First, overall relationships between dietary composition and spider traits were assessed using a multivariate generalized linear model (MGLM) via the &lsquo;manyglm&rsquo; command in the &lsquo;mvabund&rsquo; package </span><span><span>(Wang et al., 2012)</span></span><span> with a binomial error family<span>. </span>These relationships were identified via likelihood ratio test using the &lsquo;anova.manyglm&rsquo; command. A fourth corner analysis was performed using the &lsquo;trait.glm&rsquo; command in mvabund with the &lsquo;R&rsquo;, &lsquo;Q&rsquo; and &lsquo;L&rsquo; matrices representing dietary detections of prey families in each spider, spider trait data (genus (a proxy for many unmeasured traits such as morphology), sex and life stage) and prey proportional macronutrient contents, respectively, with a binomial error family. Log-likelihood ratio tests were carried out using the &lsquo;anova.traitglm&rsquo; command with 999 bootstrap iterations and Monte-Carlo resampling. The model was repeated with the least absolute shrinkage and selection operator (LASSO) applied, which is a method of penalised likelihood that reduces model terms to zero if they lack predictive power (i.e., do not reduce the Bayesian information criterion), thereby selecting models with greater predictive accuracy </span><span><span>(Brown et al., 2014)</span></span><span>. </span></p> <p><span>To assess whether the proportions of mean prey nutrient contents deviated from those expected based on random foraging, null diets were simulated using network-based null models in &lsquo;econullnetr&rsquo; </span><span><span>(Vaughan et al., 2018)</span></span><span> with the &lsquo;generate_null_net&rsquo; command. The &lsquo;generate_null_net_indiv&rsquo; function </span><span><span>(Cuff, Windsor, et al., 2023)</span></span><span> was used to generate null diets for each individual spider based on local prey communities determined via suction sampling. The mean prey macronutrient contents of spider diets were compared between expected and observed diets </span><span>using a MLM in mvabund, and significant differences visually represented through a ternary plot using ggtern<span>. To ascertain how differences between spider groups factor into any deviations from random nutrient intake, the difference in macronutrient proportions between expected and observed spider diets was also compared between spider genera, life stages and sexes in a MLM.</span></span></p> <p><span>To relate prey preferences of different spider groups to different prey and their macronutrient contents, observed interactions were compared against null models based on prey abundances using the &lsquo;generate_null_net&rsquo; command in econullnetr (as above) for each of the spider groups and, separately, for individual spiders. Ternary plots representing preference effect sizes for prey of varying macronutrient contents were generated using the group-specific data via &lsquo;ggtern&rsquo;. The observed interactions of individual spiders were divided by the interactions expected in the null model; infinite values (i.e., zero interactions expected and more than zero observed) and NAs (e.g., no interactions expected nor observed) were converted to zero. These observed/expected values were compared between spider groups via permutational multivariate analysis of variance (PerMANOVA). These results were visualised by plotting mean standardised effect sizes for each spider genus, sex and life stage from the prey choice null models via ggplot2. </span></p>

opencc-by-4.0Aug 2024View details →
zenodo44/100

JGR_biogeosciences_Supplementary_Information_Field_Data

<p>The dataset is the supplementary material as an Excel file, which includes the field measurements of DOC concentration, CDOM absorption coefficient, remote-sensing reflectance, along with the corresponding coordinates, dates, and times of collection. The study area is the Plum Island Estuary in Massachusetts and the Gulf of Maine (USA).</p>

opencc-by-4.0Sep 2024View details →
zenodo44/100

CHARMM36M Force Field Parameters for the Thioester Bond between Cysteine and Glycine

<p>CHARMM36M force field parameters for the thioester bond connecting the side chain of a cysteine to the carbonyl of a C-terminal glycine.</p> <p>The dataset includes parameter and auxiliary files in GROMACS format. In addition, a short tutorial shows how to patch the CHARMM36M force field and use the parameters.</p> <p>These parameters have been developed for the parameterization and simulation of the Ubc6 ubiquitin complex, but can be used with any conparable system.</p> <p>Details about the parameterization are provided in:</p> <p><br><a href="https://www.embopress.org/doi/full/10.1038/s44318-024-00301-3">Swarnkar, Anuruti, Florian Leidner, Ashok K. Rout, Sofia Ainatzi, Claudia C. Schmidt, Stefan Becker, Henning Urlaub, Christian Griesinger, Helmut Grubm&uuml;ller, and Alexander Stein. "Determinants of chemoselectivity in ubiquitination by the J2 family of ubiquitin-conjugating enzymes."&nbsp;<em>The EMBO Journal</em> (2024): 1-35.</a></p> <p>&nbsp;</p> <p>&nbsp;</p>

opencc-by-4.0Sep 2024View details →
zenodo44/100

Fast calculation methods for the magnetic field of particle lattices: Datasets and scripts

<div>*********************************************** README.txt **************************************************</div> <div>&nbsp;</div> <div>Title:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Fast calculation methods for the magnetic field of particle lattices:&nbsp;</div> <div>Datasets and scripts</div> <div>Version:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.0</div> <div>Date of Release:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2024/10/11</div> <div>Identifier:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;doi:10.5281/zenodo.13930969</div> <div>Permalink:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; http://dx.doi.org/10.5281/zenodo.13930969</div> <div>&nbsp;</div> <div>*************************************************************************************************************</div> <div>&nbsp;</div> <div>Associated publication:&nbsp; &nbsp; &nbsp;I. Royo-Silvestre, D. Gandia, J. J. Beato-L&oacute;pez, E. Garaio, C. G&oacute;mez-Polo&nbsp;</div> <div>"Fast calculation methods for the magnetic field of particle lattices"&nbsp;</div> <div>(paper yet to be published)</div> <div>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;</div> <div>Link to publication: &nbsp; &nbsp; (paper yet to be published)</div> <div>&nbsp;</div> <div>Suggested citation:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Please reference the associated publication above when using any datasets or</div> <div>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; materials described in this README file.</div> <div>&nbsp;</div> <div>Contact information:&nbsp; &nbsp; &nbsp; &nbsp; Isaac Royo Silvestre,&nbsp;</div> <div>Universidad P&uacute;blica de Navarra,&nbsp;</div> <div>Pamplona, Spain,&nbsp;</div> <div>isaac.royo@unavarra.es</div> <div>&nbsp;</div> <div>License:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; CC BY 4.0</div> <div>&nbsp;</div> <div>------------------------------------------------------------------------------------------------------------</div> <div>&nbsp;</div> <div>This directory contains the following datasets and supplementary materials:</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; ------------------------------</div> <div>&nbsp; &nbsp; SCRIPTS</div> <div>&nbsp; &nbsp; ------------------------------</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; - scripts.zip&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Matlab scripts (compressed zip file) used to calculate the magnetic field of&nbsp;</div> <div>lattices of magnetic particles by analytical and semianalytical methods (more information in the associated paper)&nbsp; &nbsp; &nbsp;&nbsp;</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; --------------------------------</div> <div>&nbsp; &nbsp; DATASETS</div> <div>&nbsp; &nbsp; --------------------------------</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; - data.zip: Tabular data required to plot curves (compressed zip file) in csv format,</div> <div>also data used to obtain average values</div> <div>&nbsp;</div> <div>&nbsp;</div> <div>Specific documentation of each file is described in readme files.</div> <div>&nbsp;</div> <div>Refer to the original manuscript (see above) for additional information regarding the collection and generation of these data.</div> <div>&nbsp;</div> <div>------------------------------------------------------------------------------------------------------------</div> <div>&nbsp;</div> <div>&nbsp; ---------------------------------------------------------------------</div> <div>&nbsp; DOCUMENTATION FOR 'scripts.zip'</div> <div>&nbsp; ---------------------------------------------------------------------</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; The zip file contains another readme.txt file (that explains the content of the zip file in detail),&nbsp;</div> <div>and multiple .m files. m files are Matlab scripts, text files that can be read using any text editor. However it has to be executed via Matlab, scripts contain documentation as comments.</div> <div>&nbsp;</div> <div>&nbsp; ---------------------------------------------------------------</div> <div>&nbsp; DOCUMENTATION FOR 'data.zip'</div> <div>&nbsp; ---------------------------------------------------------------</div> <div>&nbsp;</div> <div>&nbsp; &nbsp; The zip file contains another readme.txt file (that explains the content of the zip file in detail),&nbsp;</div> <div>multiple .dat files with data used to obtain averaged valus (see format in the readme.txt&nbsp;</div> <div>contained in the zip), and a folder "curves".</div> <div>The curves folder contains tabular data in .csv files, these files can be used to plot the curves</div> <div>in the manuscript.</div> <p>&nbsp;</p>

opencc-by-4.0Oct 2024View details →
zenodo44/100

Neural Network and objective analysis reconstruction of 3D Mediterranean physical fields from surface satellite and in situ observations at 1/24 deg

<p>Daily Mediterranean 3D fields of temperature, salinity and geostrophic current at 1/24&deg; of resolution, up to 150m-depth and from 2016 to mid 2022, obtained through a 3 steps approach: (1) Temperature and salinity 3D fields have been first estimated by a machine learning approach by using mediterranean reanalysis outputs (https://doi.org/10.25423/CMCC/MEDSEA_MULTIYEAR_PHY_006_004_E3R) together with satellite observations, (2) a combination of this first step with in situ observations through an Optimal interpolation to remove part of large scale biases, (3) the computation of geostrophic currents using the thermal wind equation. This work has been funded by the European Space Agency through the 4DMED-SEA project [ESA contract No. 4000141547/23/I-DT].</p>

opencc-by-4.0Sep 2024View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.