Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,828
datasets available to search
ShareScore release 0.9.0
Dataset results
8,828 results for “product”
The CloudSat-CALIPSO Cloud Amount Uncertainty product
<p>Version 1.0 of the dataset. The peer-reviewed publication for this dataset has been published in Remote Sensing, 2021, 13(4), 807, and can be accessed here <a href="https://doi.org/10.3390/rs13040807">https://doi.org/10.3390/rs13040807</a>. Please cite this when using the dataset.</p> <p>The<strong> </strong>‘CloudSat-CALIPSO Cloud Amount Uncertainty’ product provides information about mean annual and mean monthly cloud amount, at 40 vertical levels (480 m), and four spatial resolutions (1°, 2.5°, 5°, and 10°), as derived from the joint CloudSat-CALIPSO lidar-radar observations (2006–2011). For the very first time, the CloudSat-CALIPSO climatology comes with a quantitative uncertainty assessment - bootstrapped confidence intervals for mean values. The width of confidence intervals is an essential element in studying spatial and/or temporal variation in cloud amount with satellite profiling instruments. Uncertainty data are provided at four confidence levels (85%, 90%, 95%, 99%). Data products are distributed as HDF4 files, and can be accessed under the CC BY 4.0 license at doi:10.5281/zenodo.6113205. See the Product documentation file ( LIRAC.conf.v01_doc01.pdf ) for details.</p>
A Deep Neural Network Based SMAP Soil Moisture Product
<p>The soil moisture datasets here are based on a deep neural network (DNN) that utilizes the merits of a suite of existing satellite and reanalysis products to produce a new SM product with minimum (maximum) bias (correlation) -- using NASA’s Soil Moisture Active Passive (SMAP) data and ERA5 reanalysis. The benchmark of the network is a bias-adjusted SM with maximum correlation with in situ data over each land-cover type. The bias is adjusted to the product that exhibits a minimum bias over each land-cover type. Consistent with the laws of L-band microwave propagation in soil and canopy, the input variables include polarized SMAP brightness temperatures, incidence angles, vegetation scattering albedo, surface roughness parameter, surface water fraction, effective soil temperatures, bulk density, clay fraction, and vegetation optical depth from the normalized difference vegetation index (NDVI) climatology. The DNN is trained and validated using two years (04/2015--03/2017) of global data and deployed for assessment of its performance from 04/2017 to 03/2021. The testing results against in situ measurements demonstrate that the DNN outputs typically exhibit improved error quality metrics over most land cover types and climate regimes and can properly capture SM temporal dynamics, beyond each SMAP product across regional to continental scales.</p>
Hyperspectral imagery Research Products - Toulouse urban area 2015 (French ANR HYEP project)
<p>The HYEP project (ANR 14-CE22-0016-01) main goal was to propose a panel of methods and processes designed for hyperspectral imaging, which specificity makes a weighty auxiliary for the monitoring of the elements of the urban area. The main results of the project can be found at</p> <ul> <li><a href="http://doi.org/10.1080/01431161.2017.1410247">G. Roussel, C. Weber, X. Briottet and X. Ceamanos, "Comparison of two atmospheric correction methods for the classification of spaceborne urban hyperspectral data depending on the spatial resolution", International Journal of Remote Sensing, vol. 39(5), pp. 1593-1614, 2018.</a></li> <li><a href="http://doi.org/10.1109/ECMSM.2017.7945884">F. Z. Benhalouche, M. S. Karoui, Y. Deville, I. Boukerch, A. Ouamri, ``Multi-sharpening hyperspectral remote sensing data by multiplicative joint-criterion linear-quadratic nonnegative matrix factorization'', Proceedings of the 2017 IEEE International Workshop on Electronics, Control, Measurement, Signals and their application to Mechatronics (ECMSM 2017), May 24-26, 2017, Donostia - San Sebastian</a></li> <li><a href="https://hal-amu.archives-ouvertes.fr/hal-01903469">Gintautas Mozgeris, Vytaut ̇e Juodkien ̇e, Donatas Jonikaviˇcius, Lina Straigyt ̇e, S ́ebastien Gadal, and Walid Ouerghemmi. Ultra-Light Aircraft-Based Hyperspectral and Colour-Infrared Imaging to Identify Deciduous Tree Species in an Urban Environment. Remote Sensing, 10(10), October 2018.</a></li> <li><a href="https://hal.archives-ouvertes.fr/hal-02281003">Christiane Weber, Thomas Houet, S ́ebastien Gadal, Rahim Aguejdad, Grzegorz Skupinski, Yannick Deville, Jocelyn Chanussot, Mauro Dalla Mura, Xavier Briottet, Cl ́ement Mallet, and Arnaud Le Bris. HYEP HYperspectral imagery for Environmental urban Planning : principaux résultats. In 7ème colloque scientifique du groupe SFPT-GH, Toulouse, France, July 2019. ONERA - SFTP.</a></li> <li><a href="https://hal-amu.archives-ouvertes.fr/hal-01852844">Christiane Weber, Rahim Aguejdad, Xavier Briottet, Josselin Aval, Sophie Fabre, Jean Demuynck, Emmanuel Zenou, Yannick Deville, Moussa Sofiane Karoui, Fatima Zohra, Sébastien Gadal, Walid Ouerghemmi, Clément Mallet, Arnaud Le Bris, and Nesrine CHEHATA. Hyperspectral Imagery for Environmental Urban Planning. In IEEE International Geoscience and Remote Sensing Symposium (IGARSS) 2018, pages 1628–1631, Valencia, Spain, July 2018a. IEEE.</a></li> <li><a href="https://hal.archives-ouvertes.fr/hal-01854904">Christiane Weber, Rahim Aguejdad, X Briottet, J Avala, S. Fabre, J Demuynck, E Zenou, Y. Deville, M. Karoui, F Z Benhalouche, S Gadal, W Ourghemmi, C. Mallet, A. Le Bris, and N. Chehata. HYPERSPECTRAL IMAGERY FOR ENVIRONMENTAL URBAN PLANNING. In IGARSS 2018, Valencia, Spain, 2018b. </a></li> <li><a href="http://doi.org/10.5194/isprs-archives-XLII-1-W1-167-201">W. Ouerghemmi, A. Le Bris, Nesrine CHEHATA, and Clément Mallet. A two-step decision fusion strategy: application to hyperspectral and multispectral images for urban classification. In International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, volume XLII-1/W1, pages 167–174, Hanover, Germany, May 2017. Copernicus GmbH (Copernicus Publications).</a></li> <li><a href="https://hal.inria.fr/hal-02384455">Christiane Weber, Sébastien GADAL, Xavier Briottet, and Clément Mallet. Apport de l’imagerie hyperspectrale pour la planification urbaine. In Karine Emsellem, Diego Moreno, Christine Voiron-Canicio, and Didier Josselin, editors, SAGEO 2016 - Spatial Analysis and Geomatics, Actes de la conférence SAGEO’2016 - Spatial Analysis and GEOmatics, pages 454–462, Nice, France, December 2016. </a></li> <li><a href="https://hal-amu.archives-ouvertes.fr/hal-01359643">Gintautas Mozgeris, S ́ebastien Gadal, Donatas Jonikaviˇcius, Lina Straigyte, Walid Ouerghemmi, and Vytaut ̇e Juodkiene. Hyperspectral and color-infrared imaging from ultra-light aircraft: Potential to recognize tree species in urban environments. In University of California Los Angeles, editor, 8th Workshop in Hyperspectral Image and Signal Processing: Evolution in Remote Sensing, pages 542–546, Los Angeles, United States, August 2016.</a></li> <li><a href="https://hal.inria.fr/hal-02384458">Alexandre Hervieu, Arnaud Le Bris, and Cl ́ement Mallet. Fusion of hyperspectral and VHR multispectral image classifications in urban α–areas. In ISPRS Annals of Photogrammetry, Remote Sensing and Spatial Information Sciences, volume III-3, pages 457–464, Prague, Czech Republic, July 2016.</a></li> <li><a href="https://hal.archives-ouvertes.fr/hal-01888126">Christiane Weber, Thomas Houet, Sebastien GADAL, Rahim Aguejdad, Grzegorz Skupinski, Aziz Serradj, Yannick Deville, Jocelyn Chanussot, Mauro Dalla Mura, Xavier Briottet, Clément Mallet, and Arnaud Le Bris. ANR HYEP ANR 14-CE22-0016-01Hyperspectral imagery for Environmental urban Planning HyepProgramme Mobilité et systèmes urbains 2014. Research report, CNRS UMR TETIS, ESPACE, LETG ; ONERA ; GIPSA-lab ; IRAP ; IGN, October 2018c. </a></li> <li><a href="https://doi.org/10.1080/01431161.2019.1579937">Josselin Aval, Sophie Fabre, Emmanuel Zenou, David Sheeren, Mathieu Fauvel & Xavier Briottet (2019) Object-based fusion for urban tree species classification from hyperspectral, panchromatic and nDSM data, International Journal of Remote Sensing, 40:14, 5339-5365, DOI: 10.1080/01431161.2019.1579937 </a></li> <li><a href="https://doi.org/10.3390/rs11111269">Charlotte Brabant, Emilien Alvarez-Vanhard, Achour Laribi, Gwenaël Morin, Kim Thanh Nguyen et al. Comparison of Hyperspectral Techniques for Urban Tree Diversity Classification Remote Sensing, MDPI, 2019, 11 (11), pp.1269. ⟨10.3390/rs11111269⟩ hal-02191084v1 </a></li> <li><a href="https://hal.archives-ouvertes.fr/halshs-02191363v1">C. Brabant, Emilien Alvarez-Vanhard, Gwenaël Morin, Thanh Ngoc Nguyen, Achour Laribi et al. Evaluation of dimensional reduction methods on urban vegetation classification performance using hyperspectral data IGARSS 2018, Jul 2018, Valencia, Spain halshs-02191363v1</a></li> <li><a href="https://hal.archives-ouvertes.fr/halshs-02191097v1">Charlotte Brabant, Emilien Alvarez-Vanhard, Thomas Houet. Improving the classification of urban tree diversity from Very High Spatial Resolution hyperspectral images: comparison of multiples techniques Joint Urban Remote Sensing Event (JURSE 2019), May 2019, Vannes, France halshs-02191097v1</a></li> </ul> <p>This Dataset contains five research outputs of this project that were produced on the basis of Hyperspectral data obtained during an acquisition campaign led on Toulouse (France) urban area on July 2015 using Hyspex instrument which provides 408 spectral bands spread over 0.4 – 2.5 μ. Flight altitude lead to 2 m spatial resolution images.</p> <ul> <li><strong>Fields_samples.7z: </strong> ESRI Shape Format. Supervised SVN classification results for 600 urban trees according to a 3 level nomenclature: leaf type (5 classes), family (12 & 19 classes) and species (14 & 27 classes). The number of classes differ for the two latter as they depend on the minimum number of individuals considered (4 and 10 individuals per class respectively). Trees positions have been acquired using differential GPS and are given with centimetric to decimetric precision. A randomly selected subset of these trees has been used to train machine SVM and Random Forest classification algorithms. Those algorithms were applied to hyperspectral images using a number of classes for family (12 & 19 classes) and species (14 & 27 classes) levels defined according to the minimum number of individuals considered during training/validation process (4 and 10 individuals per class, respectively). Global classification precision for several training subsets is given by Brabant et al, 2019 (<a href="https://www.mdpi.com/470202">https://www.mdpi.com/470202</a>) in terms of averaged overall accuracy (AOA) and averaged kappa index of agreement (AKIA).</li> <li><strong>HySPex-2m.7z: </strong>full hyperspectral VNIR-SWIR ENVI standard image obtained from the coregistration of both VNIR and SWIR ones through a signal aggregation process that allowed to obtain a synthetic VNIR 1.6 m spatial resolution image, with pixels exactly corresponding to natif SWIR image ones. First, a spatially resampled 1.6 m VNIR image was built, where output pixel values were calculated as the average of the VNIR 0.8 m pixel values that spatially contribute to it. Then, ground control points (GCP) were selected over both images and SWIR one was tied to the VNIR 1.6 m image using a bilinear resampling method using ENVI tool. This lead to a 1.6 m spatial resolution full VNIR-SWIR image.</li> <li><strong>HYPXIM-4m.7z, HYPXIM-8m.7z, Sentinel2-10m.7z</strong>: hyperspectral ENVI standard simulated images. Spatial and spectral configurations generated correspond to ESA SENTINEL-2 instrument that was lunched on 2015, and HYPXIM sensor which was under study at that time. </li> </ul>
Global Daily Surface Blue-sky Albedo Climatology and Land Cover Climatology Dataset from 20-year MODIS Products (CMG)
<p>Surface albedo plays a critical role in climate, hydrological, and biogeochemical modeling and weather forecasting. Therefore, precisely mapping surface albedo climatology globally is necessary to better parameterize environmental systems. We generated a new global surface blue-sky actual and snow-free albedo climatology dataset from 20-year MODIS products from the Google Earth Engine (GEE). </p> <p>The 500m global surface blue-sky daily albedo climatology dataset is available at .... After reprojection and aggregation, the global Climate Modeling Grid (CMG) albedo climatology datasets at 0.05° and 0.5° are available here. All of the published datasets include historical and snow-free blue-sky albedo climatology data. For application convenience, the land cover climatology of MODIS product (MCD12Q1) is also generated and attached in the CMG files. The International Geosphere-Biosphere Programme (IGBP) and PFT classification results of MCD12Q1 since 2001 were reprojected and aggregated to 0.05° and 0.5° by find mode in each aggregation group. In order to check the heterogeneity of the land cover climatology, the percentage of the dominant type in each aggregation group was also calculated.</p>
Risk and anomaly sensor for the steel production [CSS5]
<p> </p> <p> </p> <p>The CAPRI risk and anomalies sensor for the steel production aims to provide an estimate of the processing risk for intermediate products at different stages of the processing chain. This risk estimation will be the basis for a decision support system, which will provide recommendations regarding the further processing of a semi-product. For instance, if an item will likely fail to meet the quality specification for its original customer order, the support system could recommend changing the target order the product will be assigned to, or it could recommend to immediately recycle the item or to do some reprocessing. The earlier we identify a problematic item, the less energy and time needs be wasted in its further processing, therefore the solution can lead to substantial savings both in cost and CO2 emissions.</p>
Scale Soft Sensor for steel semi-products [CSS4]
<p> </p> <p>During production of steel bars in hot rolling mills there is a formation of scale on the surface of the products. It is differentiated between two scale types: primary scale and secondary scale. During the reheating of the product in the furnace the scale is called primary scale. After reheating and before rolling the scale is removed by a descaler, for instance with high water pressure. After rolling, while the product is located on the cooling bed, the secondary scale grows up.</p>
Data files for: Meteorological factors in the production of Gigantic Jets by tropical thunderstorms in Colombia
<p>Data includes:</p> <ul> <li>Gigantic jet locations and times</li> <li>Vertical profiles for GJ and null cases</li> <li>CSV files with meteorological variables per GJ event and null case</li> </ul>
GWTC-2.1: Deep Extended Catalog of Compact Binary Coalescences Observed by LIGO and Virgo During the First Half of the Third Observing Run - Data Quality Products for GW Searches
<p>This material is part of several data products associated with GWTC-2.1, the deep extended catalog of compact binary coalescences observed by the <a href="https://www.ligo.org/">LIGO</a> Scientific Collaboration and the <a href="https://www.virgo-gw.eu/">Virgo</a> Collaboration during the first half of the third observing run. For further information, see the paper (<a href="https://dcc.ligo.org/LIGO-P2100063/public">dcc.ligo.org/LIGO-P2100063/public</a>), the related material linked from this page, and the GWTC-2.1 data release documentation (<a href="https://www.gw-openscience.org/GWTC-2.1/">www.gw-openscience.org/GWTC-2.1/</a>).</p> <p>This release contains data quality products that are used by search analyses to help mitigate non-Gaussian noise in the detector data.</p> <p><strong>Renormalized iDQ timeseries</strong></p> <p>This release contains the renormalized iDQ timeseries data quality product used within the GstLAL search to generate results for GWTC-2.1 as described in <a href="https://arxiv.org/abs/2010.15282">Goodwin <em>et al</em>. 2020</a>. This data product was found to be statistically helpful in improving data quality within the GstLAL search. For further information about iDQ see <a href="https://iopscience.iop.org/article/10.1088/2632-2153/abab5f">Essick <em>et al</em>. 2020</a>.</p> <p>The file </p> <ul> <li>H1L1-IDQ_TIMESERIES-1238166018-15843600.h5</li> </ul> <p>contains a time series for each LIGO detector related to the probability of a glitch in the strain data given the behavior in the analyzed auxiliary channels which monitor the behavior of the detectors and their environment.</p> <p>The HDF5-formatted file contains two groups, H1 and L1, corresponding to LIGO Hanford and LIGO Livingston, respectively. Each group contains several datasets; the data dataset corresponds to the renormalized iDQ log-likelihoods, as described in Godwin <em>et al</em>. 2020, and the time dataset corresponds to the times associated with the renormalized iDQ log-likelihoods in the data dataset.</p> <p> </p> <p>For more general background on gravitational-wave data quality, try the materials from a <a href="https://www.gw-openscience.org/workshops/">GW Open Data Workshop</a> or the guide to <a href="https://doi.org/10.1088/1361-6382/ab685e">LIGO-Virgo data analysis</a>.</p>
Inference products for "Finite inflation in curved space"
<p>These are the MCMC and nested sampling inference products and input files that were used to compute results for the paper <strong>"Finite inflation in cuved space"</strong> by <strong>L. T. Hergt</strong>, <strong>F. J. Agocs</strong>, <strong>W. J. Handley</strong>, <strong>M. P. Hobson</strong>, and <strong>A. N. Lasenby</strong> from 2022.</p> <p>Example plotting scripts (as <span>\(\texttt{.ipynb}\)</span> or as <span>\(\texttt{.html}\)</span> files) and figures from the paper are included to demonstrate usage.</p> <p> </p> <p>We used the following python packages for the genertion of MCMC and nested sampling chains:</p> <table> <tbody><tr> <th>Package</th> <th>Version</th> </tr> </tbody><tbody> <tr> <td>anesthetic</td> <td>2.0.0b12</td> </tr> <tr> <td>classy</td> <td>2.9.4</td> </tr> <tr> <td>cobaya</td> <td>3.0.4</td> </tr> <tr> <td>GetDist</td> <td>1.3.3</td> </tr> <tr> <td>primpy</td> <td>2.3.6</td> </tr> <tr> <td>pyoscode</td> <td>1.0.4</td> </tr> <tr> <td>pypolychord</td> <td>1.20.0</td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p>Filename conventions:</p> <ul> <li><span>\(\texttt{mcmc}\)</span>: MCMC run</li> <li><span>\(\texttt{pcs#d####}\)</span>: PolyChord run (in synchronous mode) with <span>\(\texttt{#d}\)</span> repeats per parameter block (where <span>\(\texttt{d}\)</span> is the number of parameters in that block) and with <span>\(\texttt{####}\)</span> live points.</li> <li><span>\(\texttt{_cl_hf}\)</span>: Using Boltzmann theory code CLASS with nonlinearities code halofit.</li> <li><span>\(\texttt{_p18}\)</span>: Using Planck 2018 CMB data.</li> <li><span>\(\texttt{_TTTEEE}\)</span>: Using the high-l TTTEEE likelihood.</li> <li><span>\(\texttt{_TTTEEElite}\)</span>: Using the lite version of the high-l TTTEEE likelihood.</li> <li><span>\(\texttt{_lowl_lowE}\)</span>: Using the low-l likelihoods for temperature and E-modes.</li> <li><span>\(\texttt{_BK15}\)</span>: Using data from the 2015 observing season of Bicep2 and the Keck Array.</li> <li><span>\(\texttt{lcdm}\)</span>: Concordance cosmological model called LCDM (standard 6 cosmological sampling parameters, no tensor perturbations, zero spatial curvature)</li> <li><span>\(\texttt{_r}\)</span>: Extension with a variable tensor-to-scalar ratio <span>\(r\)</span>.</li> <li><span>\(\texttt{_omegak}\)</span>: Extension with a variable curvature density parameter <span>\(\Omega_K \)</span>.</li> <li><span>\(\texttt{_H0}\)</span>: Sampling over <span>\(H_0\)</span> instead of <span>\(\theta_\mathrm{s}\)</span>.</li> <li><span>\(\texttt{_omegakh2}\)</span>: Extension with a variable curvature density parameter, but sampling over <span>\(H_0\)</span> instead of <span>\(\theta_\mathrm{s}\)</span> and over <span>\(\omega_K\equiv\Omega_Kh^2\)</span> instead of <span>\(\Omega_K \)</span>.</li> <li><span>\(\texttt{_mn2}\)</span>: Using a quadratic monomial potential for the computation of the primordial universe.</li> <li><span>\(\texttt{_nat}\)</span>: Using the natural inflation potential for the computation of the primordial universe.</li> <li><span>\(\texttt{_stb}\)</span>: Using the Starobinsky potential for the computation of the primordial universe.</li> <li><span>\(\texttt{_AsfoH}\)</span>: Using the primordial sampling parameters {`logA_SR`, `N_star`, `f_i`, `omega_K`, `H0`}.</li> <li><span>\(\texttt{_perm}\)</span>: Assuming a permissive reheating scenario.</li> </ul> <p> </p> <p> </p>
Predicted 13C NMR Chemical Shifts of Natural Products
<p>The Natural Product structures are those from the <a href="https://zenodo.org/record/5336220">COCONUTv5 database</a> .</p> <p>Predictions were obtained by means of the "Check Chemical Shifts" method from <a href="https://www.acdlabs.com/">ACD/Labs</a> C+H NMR Predictors and DB software, version 2020.1.0.</p> <p>The acd_coconut.zip archive contains a single file, acd_coconut.sdf, a collection of 2D structures from COCONUT supplemented by <sup>13</sup>C NMR chemical shifts values from ACD/Labs CNMR Predictor in verification mode.</p> <p>The file mol1.sdf describes the first compound in acd_coconut.sdf and indicates how chemical shift values are encoded.</p> <p>SDF tags related to NMR:</p> <ul> <li><CNMR_SHIFTS> for ACD/Labs DB software</li> <li><Predicted 13C shifts>, <Quaternaries>, <Tertiaries>, <Secondaries>, <Primaries> for <a href="https://sourceforge.net/projects/mixonat/">MixONat</a></li> <li><NMREDATA_ASSIGNMENT>, <NMREDATA_ORIGIN> in the style of <a href="https://nmredata.org/">NMReDATA</a></li> </ul> <p>The calculation workflow is based on tools developped <a href="https://github.com/nuzillard/KnapsackSearch/">here</a>.</p> <p>No attempt was made to change unlikely tautomers (like aliphatic iminols standing for aliphatic amides). Unlikely structures are likely associated to unlikely predicted chemical shift value sets.</p>
Cultivation practices in soybean production at a glance
<p>This video contains information about cultivation practices in soybean production. It was made within the scope of the Legumes Translated Horizon 2020 project. It is available in Serbian with subtitles in English, German, Hungarian, Italian, Romanian, Russian and Serbian.</p>
Underlying Data for Manuscript titled "Hydrothermal Carbonization (HTC) of Dairy Waste: Effect of Temperature and Initial Acidity on the composition and quality of solid and liquid products"
<p>The embodied files include the raw data and initial calculations used to generate the extended data for Manuscript titled "Hydrothermal Carbonization (HTC) of Dairy Waste: Effect of Temperature and Initial Acidity on the composition and quality of solid and liquid products". The files include calculations for Phosphorus Recovery from Hydrochar, as well as Heavy Metals Fractions retrieved by the hydrochar (solid product of Hydrothermal Carbonization).</p>
Amazon product reviews (mock dataset)
<p>About</p> <p>This is a mock dataset with Amazon product reviews. Classes are structured: 6 "level 1" classes, 64 "level 2" classes, and 510 "level 3" classes.</p> <p><br> 3 files are shared:</p> <ul> <li>train_40k.csv - training 40k Amazon product reviews</li> <li>valid_10k.csv - 10k reviews left for validation</li> <li>unlabeled_150k.csv - raw 150k Amazon product reviews, these can be used for language model finetuning.</li> </ul> <p>Level 1 classes are: health personal care, toys games, beauty, pet supplies, baby products, and grocery gourmet food.</p> <p>Dataset originally from <a href="https://www.kaggle.com/datasets/kashnitsky/hierarchical-text-classification">https://www.kaggle.com/datasets/kashnitsky/hierarchical-text-classification</a></p>
Dataset for Heavy snowfall event over the Swiss Alps: Did wind shear impact secondary ice production?
<p>The change in wind direction and speed with height, referred to as vertical wind shear, causes enhanced turbulence in the atmosphere. As a result, there are enhanced interactions between ice particles that break up during collisions in clouds which could cause heavy snowfall. For example, intense dual-polarization Doppler signatures in conjunction with strong vertical wind shear were observed by an X-band weather radar during a wintertime high-intensity precipitation event over the Swiss Alps. An enhancement of differential phase shift (Kdp > 1◦ km−1) around −15◦C suggested that a large population of oblate ice particles was present in the atmosphere. Here, we show that ice–graupel collisions are a likely origin of this population, probably enhanced by turbulence. We perform sensitivity simulations that include ice–graupel collisions of a cold frontal passage to investigate whether these simulations can capture the event better and whether the vertical wind shear had an impact on the secondary ice production (SIP) rate. The simulations are conducted with the Consortium for Small-scale Modeling (COSMO), at a 1km horizontal grid spacing in the Davos region in Switzerland. The rime splintering simulations could not reproduce the high ice crystal number concentrations, produced too large ice particles and therefore overestimated the radar reflectivity. The collisional-breakup simulations reproduced both the measured horizontal reflectivity and the ground-based observations of hydrometeor number concentration more accurately (∼ 20L−1). During 14:30–15:45UTC, the vertical wind shear strengthened by 60% within the region favorable for SIP. Calculation of the mutual information between the SIP rate and vertical wind shear and updraft velocity suggests that the SIP rate is best predicted by the vertical wind shear rather than the updraft velocity. The ice–graupel simulations were insensitive to the parameters in the model that control the size threshold for the conversion from ice to graupel and snow to graupel.</p>
Data products for the XMM-SERVS survey
<p>These are the XMM-Newton data products from the XMM-SERVS survey associated with the Ni et al. (2021) paper: "The XMM-SERVS survey: XMM-Newton point-source catalogs for the W-CDF-S and ELAIS-S1 fields", ApJS, 256, 21, and the Chen et al. (2018) paper: "The XMM-SERVS survey: New XMM-Newton point-source catalogue for the XMM-LSS field”, MNRAS, 478, 2132.</p>
Bio-oil production from biogenic wastes, the hydrothermal conversion step - Data
<p>Food wastes are an abundant resource that can be effectively valorised by hydrothermal liquefaction to produce bio-fuels. The objective of the European project Waste2Road is to demonstrate the complete value chain from waste collection to engine tests. The principle of hydrothermal liquefaction is well known but there are still many factors that make the science very empirical. Most experiments in the literature are performed on batch reactors. Comparison of results from batch reactors with experiments with continuous reactors are rare in the literature.</p> <p>This dataset presents fully documented experiments, performed in this project, on food wastes, with different compositions, conditions and solvents. The data set is extended with data from the literature. This data set also includes bio-oil and aqueous phase analysis by gas chromatography coupled with mass spectrometry.</p>
Processing and Data for "Estimating ocean net primary productivity from daily cycles of carbon biomass measured by profiling floats"
<p><strong>Description: </strong></p> <p>These files contain processed BGC-Argo float data, figure data, the radiocarbon productivity subset, bootstrapping results, and the associated Python/Matlab code to calculate net primary productivity from daily cycles of optical backscatter and dissolved oxygen.</p> <p>The raw float data used in this study are available from the Argo Global Data Assembly Centers in Brest, France (ftp://ftp.ifremer.fr/ifremer/argo/dac/coriolis) and Monterey, California (ftp://usgodae.org/pub/outgoing/argo/dac/coriolis). The raw MODIS satellite-based productivity data is available from the Oregon State University Ocean Productivity site (<a href="http://orca.science.oregonstate.edu/npp_products.php">http://orca.science.oregonstate.edu/npp_products.php</a>). The raw MODIS satellite-based euphotic depth estimates are available from the NASA L3 browser (<a href="https://oceancolor.gsfc.nasa.gov/l3/">https://oceancolor.gsfc.nasa.gov/l3/</a>). The original ship-based estimates of net primary productivity are available from the Pangaea (<a href="https://doi.pangaea.de/10.1594/PANGAEA.932417">https://doi.pangaea.de/10.1594/PANGAEA.932417</a>) and the British Oceanography Data Centre (<a href="https://www.bco-dmo.org/dataset/814803">https://www.bco-dmo.org/dataset/814803</a>).</p> <p><strong>Please cite as: </strong></p> <p>Stoer, A., and Fennel, K. 2022. Processing and Data for Estimating ocean net primary productivity from daily cycles of carbon biomass measured by profiling floats. Zenodo. doi: 10.5281/zenodo.6977161.</p> <p><strong>Python/MATLAB Software Description: </strong></p> <p>dielFit_GOPeqCR.m: This code is from Johnson and Bif (2021). We have added outputs for standard errors for linear and PvE models and sunrise/sunset times. To run this code with the associated Python software a MATLAB engine needs to be installed. Please see: <a href="https://www.mathworks.com/help/matlab/matlab-engine-for-python.html">https://www.mathworks.com/help/matlab/matlab-engine-for-python.html</a></p> <p>argo_so_processing_20220815.py: This code is the first of two pieces of software for estimating net primary productivity from floats in the Southern Ocean. The program below obtains the data from the BGC Argo database (Argo, 2021) and processes it. Simple data quality control, interpolation, biogeochemical calculations, and data binning occur. The processed float data is located in the folder 'Processed Argo Transects'.</p> <p>argo_daily_npp_20220815.py: This code using processed Argo float data that contains oxygen and particle backscatter measurements to infer net primary production. The code combines the float that meet the criteria of sampling at all local hours of the day throughout its lifetime. Then, it constructs diel cycles from this data by finding the median value of each hour and uses the code from Johnson and Bif (2021), which is a modified version from Barone et al. (2019). The algorithm used to convert particle backscatter to particulate organic carbon is from Graff et al. (2015). We assume that dissolved primary productivity accounts for 30% of total primary productivity (Moran et al., 2022).</p> <p>argo_daily_npp_bootstrap_20220815.py: This code using processed Argo float data that contains co-located oxygen and particle backscatter measurements to infer net primary production. This code is very similar to argo_daily_npp_20220815.py but randomly samples a subset of the co-located profiles at different sample sizes before calculating net primary productivity. Productivity is calculated at each sample size 1000 times. The results of this analysis is located in the folder 'Bootstrapped Results'. </p> <p>More details can be found in the code itself. </p> <p><strong>Data Descriptions: </strong></p> Data from 'Processed Argo Transects' Folder | Description for each variable <table><tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>depth</td> <td>Average depth of depth bin</td> <td>m</td> </tr> <tr> <td>mid_depth</td> <td>Center of depth bin</td> <td>m</td> </tr> <tr> <td>pressure</td> <td>Average pressure in depth bin</td> <td>dbar</td> </tr> <tr> <td>profile_index</td> <td>Profile number or index</td> <td> </td> </tr> <tr> <td>profile_longitude</td> <td>Average longitude of profile</td> <td>degE</td> </tr> <tr> <td>profile_latitude</td> <td>Average latitude of profile</td> <td>degN</td> </tr> <tr> <td>profile_time</td> <td>Average UTC time of profile</td> <td>yyyy-mm-dd hh:mm:ss</td> </tr> <tr> <td>profile_local_time</td> <td>Average local time of profile</td> <td>yyyy-mm-dd hh:mm:ss</td> </tr> <tr> <td>profile_local_hour</td> <td>The hour of the local timestamp</td> <td> </td> </tr> <tr> <td>salinity</td> <td>Seawater salinity</td> <td>PSU</td> </tr> <tr> <td>temperature </td> <td>Seawater temperature</td> <td>degC</td> </tr> <tr> <td>oxygen</td> <td>Dissolved oxygen concentration</td> <td>umol kg-1</td> </tr> <tr> <td>oxygen_saturation</td> <td>Saturated dissolved oxygen concentration calculated from the Garcia and Gordon (1992) equation.</td> <td>umol kg-1</td> </tr> <tr> <td>oxygen_anom</td> <td>The difference between observed dissolved oxygen concentration and saturated oxygen </td> <td>umol kg-1</td> </tr> <tr> <td>bbp470</td> <td>Optical backscatter coefficient at 470 nm. Particulate organic carbon is calculated in argo_daily_npp_20220815.py</td> <td>m-1</td> </tr> </tbody> </table> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>wmo</td> <td>WMO number of float</td> <td> </td> </tr> <tr> <td>profile_index</td> <td>Profile index or profile number taken by float</td> <td> </td> </tr> <tr> <td>profile_latitude</td> <td>Average profile latitude</td> <td>degN</td> </tr> <tr> <td>profile_longitude</td> <td>Average profile longitude</td> <td>degE</td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>fod</td> <td>Fraction of day</td> <td> </td> </tr> <tr> <td>oxy</td> <td>Sinusoidal curve fit to oxygen</td> <td>mol m-3</td> </tr> <tr> <td>poc</td> <td>Sinusoidal curve fit to particulate organic carbon</td> <td>mol m-3</td> </tr> <tr> <td>oxy_med</td> <td>Hourly median oxygen</td> <td>mol m-3</td> </tr> <tr> <td>oxy_sem</td> <td>Hourly standard error of oxygen</td> <td>mol m-3</td> </tr> <tr> <td>poc_med</td> <td>Hourly median particulate organic carbon</td> <td>mol m-3</td> </tr> <tr> <td>poc_sem</td> <td>Hourly standard error of particulate organic carbon</td> <td>mol m-3</td> </tr> <tr> <td>region</td> <td>Name of data subset (e.g., 30-40 deg N, co-located)</td> <td> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>region</td> <td>Name of data subset (e.g., 30-40 deg N) </td> <td> </td> </tr> <tr> <td>depth</td> <td>Depth of profile</td> <td>m</td> </tr> <tr> <td>zeu</td> <td>1% euphotic depth from Lee et al. (2013) algorithm from NASA (2022) L3 satellite products. </td> <td>m</td> </tr> <tr> <td>n_profiles_bpp</td> <td>Number of backscatter profiles</td> <td> </td> </tr> <tr> <td>n_profiles_oxy</td> <td>Number of oxygen profiles</td> <td> </td> </tr> <tr> <td>n_floats_bbp</td> <td>Number of floats with backscatter measurements</td> <td> </td> </tr> <tr> <td>n_floats_oxy</td> <td>Number of floats with oxygen measurements</td> <td> </td> </tr> <tr> <td>gop_do</td> <td>Gross oxygen productivity estimated from dissolved oxygen</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>gop_do_serr</td> <td>Standard error of gross oxygen productivity estimated from dissolved oxygen</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>gop_do_p</td> <td>p-value of curve fit to hourly oxygen data</td> <td> </td> </tr> <tr> <td>gop_do_r2</td> <td>r-squared value of curve to hourly oxygen data</td> <td> </td> </tr> <tr> <td>oxy_sr</td> <td>The calculated sunrise time as a fraction of the day</td> <td> </td> </tr> <tr> <td>oxy_ss</td> <td>The calculated sunset time as a fraction of the day</td> <td> </td> </tr> <tr> <td>gpp_bbp</td> <td>Gross carbon productivity estimated from optical backscatter</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>gpp_bbp_serr</td> <td>Standard error of gross carbon productivity estimated from optical backscatter</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>gop_do_p</td> <td>p-value of curve fit to hourly particulate organic carbon data</td> <td> </td> </tr> <tr> <td>gop_do_r2</td> <td>r-squared value of curve to hourly particulate organic carbon data</td> <td> </td> </tr> <tr> <td>gop_bbp</td> <td>Gross oxygen productivity calculated from gross carbon productivity (gpp_bbp)</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>gop_bbp_serr</td> <td>Standard error of gross oxygen productivity calculated from gross carbon productivity (gpp_bbp_serr)</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>npp_bbp</td> <td>Net primary productivity calculated from backscatter-based gross oxygen productivity (gop_bbp)</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>npp_bbp_serr</td> <td>Standard error of net primary productivity calculated from backscatter-based gross oxygen productivity (gop_bbp_serr)</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>npp_do</td> <td>Net primary productivity calculated from oxygen-based gross oxygen productivity (gop_do)</td> <td>mol m-3 yr-1</td> </tr> <tr> <td>npp_do_serr</td> <td>Standard error of net primary productivity calculated from oxygen-based gross oxygen productivity (gop_do_serr)</td> <td>mol m-3 yr-1</td> </tr> </tbody> </table> <table> </table> Data for Fig. S1 | Description for number_of_bbp_profiles_in_each_year.csv and number_of_oxy_profiles_in_each_year.csv <table><tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>year</td> <td>Year</td> <td> </td> </tr> <tr> <td>bbp470</td> <td>Number of backscatter profiles</td> <td> </td> </tr> <tr> <td>oxygen_anom</td> <td>Number of oxygen profiles</td> <td> </td> </tr> </tbody> </table> <table> </table> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>mid_depth</td> <td>Depth of NPP profile</td> <td>m</td> </tr> <tr> <td>mean</td> <td>Mean volumetric 14C-NPP at depth</td> <td>mmol m-3 yr-1</td> </tr> <tr> <td>median</td> <td>Median volumetric 14C-NPP at depth</td> <td>mmol m-3 yr-1</td> </tr> <tr> <td>min</td> <td>Minimum volumetric 14C-NPP at depth</td> <td>mmol m-3 yr-1</td> </tr> <tr> <td>maximum</td> <td>Maximum volumetric 14C-NPP</td> <td>mmol m-3 yr-1</td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <table> <tbody><tr> <th><strong>Variable</strong></th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>subset</td> <td>Number of profiles randomly sampled from the co-located dataset</td> <td> </td> </tr> <tr> <td>int_npp_do</td> <td>Euphotic-depth-integrated net primary productivity calculated from oxygen-based gross oxygen productivity</td> <td>mol m-2 y-1</td> </tr> <tr> <td>int_npp_bbp</td> <td>Euphotic-depth-integrated net primary productivity calculated from backscatter-based gross oxygen productivity</td> <td>mol m-2 y-1</td> </tr> <tr> <td>gop_do_r2</td> <td>R-squared of the sinusoidal curve to the diel cycle of oxygen anomaly</td> <td> </td> </tr> <tr> <td>gpp_bbp_r2</td> <td>R-squared of sinusoidal curve to the diel cycle of particulate organic carbon</td> <td> </td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>ROSE</td> <td>Topographic (negative values are below sea level)</td> <td>m</td> </tr> <tr> <td>ETOPO05_Y</td> <td>Latitude</td> <td>degN</td> </tr> <tr> <td>ETOPO05_X</td> <td>Longitude</td> <td>degE</td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <table> <tbody><tr> <th>Variable</th> <th>Description</th> <th>Units</th> </tr> </tbody><tbody> <tr> <td>database</td> <td>Database the data was extracted from</td> <td> </td> </tr> <tr> <td>Month</td> <td>Month of NPP measurement</td> <td>month of year</td> </tr> <tr> <td>npp_14c</td> <td>Net primary productivity estimated from the radiocarbon method</td> <td>mmol m-3 y-1</td> </tr> <tr> <td>depth</td> <td>depth of 14C-NPP measurement</td> <td>m</td> </tr> </tbody> </table> <table> </table>
ecochange: An R-package to derive ecosystem change indicators from freely available earth observation products
<p>This release includes the R code necessary to reproduce Figures 2-4 in the Application paper entitled: "ecochange: An R-package to derive ecosystem change indicators from freely available Earth Observation products."</p>
Joint Optimization of Production and Maintenance for Cost-effective Manufacturing and Demand Response Participation Dataset - Machine Breakdown Event
<p>Using the previous dataset at <<a href="https://zenodo.org/record/4106746">https://zenodo.org/record/4106746</a>> an announcement of a machine breakdown event was simulated on Friday at 6:00, describing that machine MAQ119 could breakdown at any moment, detected using a predictive maintenance system. Accordingly, the proposed scheduler imposed a machine available frames constraint, during its event, of 0 usable frames, thus removing the machine from production. The proposed genetic algorithm was executed for 1 hour at period 769 (Friday at 7:00) until the remainder of the schedule’s time window. Also, the predefined optimization weights were 1 for total cost and 0 for machine occupancy deviation.</p> <p> </p> <p>File Description:</p> <ul> <li>Input_JSON_Machine_Breakdown_Optimization - JSON input data for the machine breakdown event</li> <li>Output_JSON_Machine_Breakdown_Optimization - JSON output data for the machine breakdown event</li> <li>Output_Statistics_Machine_Breakdown_Optimization - Excel output machine breakdown event statistics</li> </ul>
Joint Optimization of Production and Maintenance for Cost-effective Manufacturing and Demand Response Participation Dataset - Maintenance Optimization
<p>Using the previous dataset at <<a href="https://zenodo.org/record/4106746">https://zenodo.org/record/4106746</a>> a maintenance optimization scenario was formulated to validate the scheduler's ability to schedule tasks as well as maintenance activities while also minimizing the total costs. Accordingly, it was considered an optimization weight of 1 for the total cost and 0 for machine occupancy deviation, as well as a 2-hour execution time for the genetic algorithm. Each maintenance activity, for every machine, has a duration of 6 hours and 10 minutes, with a labor cost of 3,22 EUR/hour during the stipulated maintenance hours and a monetary penalty, that doubles the cost (i.e., 6.44 EUR/hour) if done out of maintenance hours.</p> <p> </p> <p>File Description:</p> <ul> <li>Input_JSON_Maintenance_Optimization - JSON input data for the maintenance optimization</li> <li>Output_JSON_Maintenance_Optimization - JSON output data for the maintenance optimization</li> <li>Output_Statistics_Maintenance_Optimization - Excel output maintenance optimization statistics</li> </ul>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.