Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,669
datasets available to search
ShareScore release 0.9.0
Dataset results
3,669 results for “Lasers”
Effect of intense x-ray free-electron laser transient gratings on the magnetic domain structure of Tm:YIG
<p>Dataset for the publication "Effect of intense x-ray free-electron laser transient gratings on the magnetic domain structure of Tm:YIG" by V. Ukleev, et al.</p>
Appendix Data for Manuscript : Application of OSL surface exposure dating with the use of two-dimensional OSL laser scanning instruments and energy-dispersive x-ray spectroscopy
<p>Appendix Data for Manuscript 'Application of OSL surface exposure dating with the use of two-dimensional OSL laser scanning instruments and energy-dispersive x-ray spectroscopy'.</p>
Data for the article "Laser-Induced Creation of Antiferromagnetic 180-Degree Domains in NiO/Pt Bilayers"
<p>The authors thank T. Reimer and L. Schnitzspan for skillful technical assistance and O. Gomonay for her comments. Experiments were performed at the CIRCE beamline at ALBA Synchrotron with the collaboration of ALBA staff. The authors thank HZB for the allocation of synchrotron radiation beamtime and thankfully acknowledge the financial support by HZB. The authors acknowledge the Paul Scherrer Institute, Villigen, Switzerland for the beamtime allocation under proposal 20211822 at the SIM beamline of the SLS. B.B. and A. R. acknowledge funding from the European Union’s Framework Programme for Research and Innovation Horizon 2020 (2014–2020) under the Marie Skłodowska- Curie Grant Agreement No. 860060 (ITN MagnEFi). M.K. acknowledges support from the Graduate School of Excellence Materials Science in Mainz (MAINZ) DFG 266, the DAAD (Spintronics network, Project No. 57334897 and Insulator Spin-Orbitronics, Project No. 57524834), and all groups from Mainz and Kaiserslautern acknowledge that this work was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), TRR 173-268565370 (Project Nos. A01, A08, B02 and B03) and KAUST (OSR-2019-CRG8-4048). B.S. further acknowledges funding by the Dynamics and Topology Research Center (TopDyn) funded by the State of Rhineland Palatinate. M.K. acknowledges financial support from the Horizon 2020 Framework Programme of the European Commission under FET-Open Grant Agreement No. 863155 (s-Nebula). This work was also supported by ERATO “Spin Quantum Rectification Project” (Grant No. JPMJER1402) and the Grant-in-Aid for Scientific Research on Innovative Area, “Nano Spin Conversion Science” (Grant No. JP26103005), Grant-in-Aid for Scientific Research (S) (Grant No. JP19H05600) from JSPS KAKENHI, Japan. M.A.N. and M.F. acknowledge Spanish ICNN funding through project ECLIPSE (PID2021- 122980OB-C54). R.R. also acknowledges support from the Grant RYC 2019-026915-I, the Project TED2021-130930B-I00 funded by thee MCIN/ AEI/10.13039/501100011033 and by the ESF investing in your future and the European Union NextGenerationEU/PRTR, the Xunta de Galicia (ED431F 2022/04, ED431B 2021/013, Centro Singular de Investigación de Galicia Accreditation 2019-2022, ED431G 2019/03) and the European Union (European Regional Development Fund - ERDF)</p>
Apache Point Observatory Lunar Laser-ranging Operation (APOLLO) normal point data: 2006 through 2020
<p>Normal point data from the Apache Point Observatory Lunar Laser-ranging Operation (APOLLO) covering the 15-year span from April 2006 through the end of 2020. APOLLO measures the earth-moon separation by recording the round-trip travel time of photons from the Apache Point Observatory to five retro-reflector arrays on the moon. The APOLLO data set, combined with the 50-year archive of measurements from other lunar laser ranging (LLR) stations, can be used to probe fundamental physics such as gravity and Lorentz symmetry, as well as properties of the moon itself. These normal points have a median nightly accuracy of 1.7mm, which is an order of magnitude better than other LLR stations. Data is provided in both the "JPL" format (.np) and the Consolidated Laser Ranging Data Format (.crd)</p>
Tail-Wave-Assisted Positron Acceleration in Nonlinear Laser Plasma Wakefields
<p>The data and vector diagrams of the results of positron trapping and acceleration when the initial parameters are modified.</p>
PW laser characterization
<p>Supplementary material of the thesis <em>“Development of ultra-stable characterization techniques for ultrashort laser beams”. </em>Spatiospectral characterization of the ATLAS-3000 laser relative to 800 nm, thus assuming flat phase at that wavelength. Measurement done outside the vacuum chamber using an achromatic imaging system to reduce the 20 cm beam diameter to mm-scale and characterized with a 3-mm-thick calcite cut with 45° optical axis angle. Spatiospectral intensity (a) and phase (b) profiles evolution.</p>
Predicting Pulsed Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction - sample untreated_162nm
<p>RHEED intensity image dataset of sample <strong>untreated_162nm</strong> in work "Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction."</p>
Predicting Pulsed Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction - sample treated_81nm
<p>RHEED intensity image dataset of sample <strong>t0.08</strong> in work "Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction."</p>
Automated control and optimization of laser-driven ion acceleration: Data
<p>This data repository contains python scripts that can recreate the plots from the article on 'Automated control and optimization of laser-driven ion acceleration'.</p>
Change in H2O levels of a milliQ ice sample as a result of laser ablation (100kHz, 50uJ)
<p>This data includes the measured change in water vapour level corresponding to three different laser ablation durations applied to milliQ ice sample. Pulse energy of the laser is 50 uJ and repetition rate is 100kHz. </p> <table> <tbody> <tr> <td>Datetime</td> <td>Laser Ablation Duration (s)</td> </tr> <tr> <td>2019-12-09 11:28</td> <td>20</td> </tr> <tr> <td>2019-12-09 11:33</td> <td>40</td> </tr> <tr> <td>2019-12-09 11:40</td> <td>60</td> </tr> </tbody> </table> <p> </p>
Change in H2O levels of a milliQ ice sample as a result of laser ablation (50kHz, up to 43uJ)
<p>The change in measured water vapour corresponding to 19 and 30 laser ablated craters in a milliQ ice sample. Relevant time period is 2021-05-13 from 16:07 to 16:52.<br> <br> File LA_data_2021-05-13 10.29.58.456138++0200.csv includes data of the laser used for ablation as well as position and speed data of the linear stage that holds the ice sample. <br> <br> File HIDS2159-20210513-150816Z-DataLog_User.dat includes H2O data.</p>
Predicting Pulsed-Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction - gaussian_fit_parameters - sample untreated_162nm
<p>RHEED raw dataset and Gaussia fitting parameter dataset for sample "untreated_162nm" in work "Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction."</p>
Compressed Datasets for Work "Predicting Pulsed-Laser Deposition SrTiO3 Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction"
<p>Compressed version of RHEED image datasets and Gaussia fitting parameter datasets for samples "treated_213nm", "treated_81nm" and "untreated_162nm" in the work "Predicting Pulsed Laser Deposition SrTiO<sub>3 </sub>Homoepitaxy Growth Dynamics using High-Speed Reflection High-Energy Electron Diffraction."</p>
Dataset for geometrical digital twins of the as-built microstructure of three-leaf stone masonry walls with laser scanning
<p>This repository contains the dataset from the geometrical digital twinning of the as-built microstructure of three-leaf stone masonry walls of 700mm x 700 mm x 400 mm (Height x Length x Width) with laser scanning. It includes raw and processed data and data analysis scripts. A Readme file explains the structure of the dataset and the contents of each folder. The dataset corresponds to the journal paper <strong><em>Geometrical digital twins of the as-built microstructure of three-leaf stone masonry walls with laser scanning</em></strong> published on Scientific data https://doi.org/10.1038/s41597-023-02417-3.</p> <p>Please, cite as:</p> <p>Saloustros, S., Settimi, A., Ascencio, A.C., Gamerro, J, Weinand, Y., Beyer, K. Geometrical digital twins of the as-built microstructure of three-leaf stone masonry walls with laser scanning. <em>Sci Data</em> <strong>10</strong>, 533 (2023). https://doi.org/10.1038/s41597-023-02417-3</p>
A dataset on in-situ electromagnetic wave integrity control of selective laser fusion printed parts using Machine Learning
<p><strong>DeepSLM Dataset</strong></p> <p>This dataset contains signals from metal parts printed in 3D using SLM (Selective laser melting) technology, produced as part of the DeepSLM project:<em> In-situ monitoring of Selective-Laser-Melted Ti6Al4V Parts Using Eddy Current Testing and Machine Learning</em>.</p> <p><em>Sensor and data collection</em></p> <p>An impedance-based non-destructive testing device is installed on the LPBF coating device. It is in the form of sensors with the following characteristics:</p> <p><em>Spectrum of analysis of the sensors</em></p> <ul> <li>Minimal length: 3-5 mm</li> <li>Minimal width acquisition: 2-3 mm (Without borders effects)</li> <li>Minimal number of layers: 50 layers</li> <li>Signal minimal penetration depth (TiAl<em>6</em>V<em>4</em>/875kHz) = 1.5 mm</li> </ul> <p>The sensors record the signal during printing, while simultaneously sending it to a computer via Bluetooth. The signals are first stored in the database. Next, a dataset is constructed from the extracted signals related to each part, and from the added semi-automatic annotations which describe the porosity of the part and layers.</p> <p><em>Annotations</em></p> <p>In the annotation process, there are 2 different types of labels and a metadata summary for these prints:</p> <p>1. Archimedean porosity measurement for the whole part<br>2. Layer porosity obtained after image processing applied on the resulting metallography images<br>3. Print-related metadata such as print parameters, part dimensions, layer thickness, etc</p> <p>Size: 66 parts<br>Set of printing parameters: 250</p> <p> --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------</p> <p><strong>Dataset organization</strong></p> <p>The dataset is composed of 7 different printings and is organized as follows:<br>- signals: contains collected signals<br>- metallography: contains porosity extracted by metallography<br>- archimedean: contains porosity extracted by archimedean weighing<br>- metallography-images: contains metallography process images<br>- metadata.csv: contains print metadata (print parameter, part name, strategy, etc.)</p> <p>Each printed part has a unique ID ranging from 0 to 65. Each sub-part has an ID which is the ID of the base part suffixed with the sub-part position: 14_1 is the first sub-part of part 14. This nomenclature is uniform throughout the dataset.</p> <p>The README.md file in the dataset provides more detailed information on the structure of the dataset and the format of each of the files making up the dataset.</p> <p> </p> <p><strong>Relative article</strong></p> <p><a title="https://doi.org/10.1007/978-3-031-47784-3_18" href="https://doi.org/10.1007/978-3-031-47784-3_18" target="_blank" rel="noreferrer noopener">https://doi.org/10.1007/978-3-031-47784-3_18</a></p> <p>Sallem, H., Ghorbel, H., Goffinet, E., Cinna, A., Pralong, J., Wicht, J., & Revaz, B. (2023, May). In-Situ Monitoring of Selective Laser Melted Ti–6Al–4V Parts Using Eddy Current Testing and Machine Learning. In <em>Advances In Additive Manufacturing Conference</em> (pp. 139-148). Cham: Springer Nature Switzerland.</p>
Terrestrial laser scanning data of urban trees in Milton Keynes, UK: individual trees and Treegraph outputs
<p>This dataset was used for the analysis of the following publication:</p> <p>Yang, W., Wilkes, P., Vicari, M.B., Hand, K., Calders, K. and Disney, M., 2024. Treegraph: tree architecture from terrestrial laser scanning point clouds. <em>Remote Sensing in Ecology and Conservation</em>.</p> <p><strong>Any use of this dataset should cite the paper above </strong>(Creative Commons Attribution NonCommercial License).</p> <p> </p> <p>================================================<br> Dataset<br>================================================</p> <p><strong>TLS_point_clouds:</strong></p> <p>- Data collection: Terrestrial laser scanning data acquired in leaf-off condition in April 2021.</p> <p>- Scanning instrument: We used a RIEGL VZ-400 with a wavelength of 1550 nm, 0.35 mrad beam divergence and 0.04˚ angular resolution.</p> <p>- Locations: The data were collected from three sites in Milton Keynes, UK: Avebury Blvd (Ave), Dansteed Way (Dan), and Overgate (Ove).</p> <p>- File information: Each file is an individual leaf-off tree point cloud in Polygon File Format (.ply), which can be viewed in software such as CloudCompare.</p> <p> </p> <p><strong>Treegraph_outputs:</strong></p> <p>- Description: Model outputs from <em>Treegraph</em> for individual trees.</p> <p>- File naming convention: [TreeID]-[downsample_voxel_length]-[tip_diameter_if_known].*</p> <ul> <li>*.centres.ply: Skeleton nodes of individual trees.</li> <li>*.mesh.ply: Cylinder model of individual trees.</li> <li>*.json: Geometrical and topological attributes at varying scales, from internode and branch to the whole tree.</li> <li>*.txt: Summary of input parameters, logs of intermediate steps, and a statistical overview of whole-tree structural attributes.</li> </ul>
Nackhälleskölden - Laser-scanned Bronze Shield
This is a 3D-scanned bronze shield that we borrowed from Länsmuseet Halland. This is a very unique item that we have been blessed to handle and 3D-scan. This shield (Nackhälleskölden) was found 1865 in a bog in Halland/Sweden. - http://mis.historiska.se/mis/sok/exhib.asp?id=43875 - https://sv.wikipedia.org/wiki/Fr%C3%B6slundask%C3%B6ldarna In order to scan this shield we used Handyscan 3D-scanner VIUscan. To process the shield and decimate the model we used Geomagic Studio. Feel free to download the file! By http://CreativeTools.se Source: Objaverse 1.0 / Sketchfab
Creed Monument, Greenwich - Laser Scan
Monument / grave of Sir James Creed MP at St Alfege Church, Greenwich <br> **Laser Scan / Point Cloud**<br> Leica BLK360 <br> Source: Objaverse 1.0 / Sketchfab
Laser-Ranibizumab-Triamcinolone for Proliferative Diabetic Retinopathy
ClinicalTrials.gov study NCT00445003. IPD Sharing: Not stated. Countries: 1. Publications: 14.
Transfoveal Micropulse Laser for Center Involving Diabetic Macular Edema
ClinicalTrials.gov study NCT04359771. IPD Sharing: YES. Countries: 1. Publications: 2.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.