Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,580
datasets available to search
ShareScore release 0.9.0
Dataset results
1,580 results for “V2”
GLDAS Noah Land Surface Model L4 monthly 1.0 x 1.0 degree Early Product V2.1 (GLDAS_NOAH10_M_EP) at GES DISC
NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is an Early Product for GLDAS-2.1 Noah 1.0 degree monthly dataset. The monthly data product was generated through temporal averaging of GLDAS-2.1 Noah 3-hourly data simulated with the Noah Model 3.6 in Land Information System (LIS) Version 7. The data product contains 36 land surface fields from January 2000 to present.The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards.The GLDAS-2.1 products supersede their corresponding GLDAS-1 products.The GLDAS-2.1 data are archived and distributed in NetCDF format.
VIIRS/NPP Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT - V2
The VIIRS/NPP Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT product, short-name VNP14_NRT is based on the MODIS Fire algorithm. The input to the Active Fires production are Level-1B moderate-resolution reflective band M7, and emissive bands M13 and M15. The fire algorithm first calculates bands M13, M15 brightness temperature (BT) statistics for a group of background pixels adjacent to each potential fire pixel. These statistics are used to set thresholds for several contextual fire detection tests. There is also an absolute fire detection test based on a pre-set M13 BT threshold. If the results of the absolute and relative fire detection tests meet certain criteria, the pixel is labeled as fire. The designation of a pixel as fire from the results of the BT threshold tests may be overridden under sun glint conditions or if too few pixels were used to calculate the background statistics.The VNP14_NRT product contains several pieces of information for each fire pixel: pixel coordinates, latitude and longitude, pixel M7 reflectance, background M7 reflectance, pixel M13 and M15 BT, background M13 and M15 BT, mean background BT difference, background M13, M15, and BT difference mean absolute deviation, fire radiative power, number of adjacent cloud pixels, number of adjacent water pixels, background window size, number of valid background pixels, detection confidence, land pixel flag, background M7 reflectance, and reflectance mean absolute deviation.The product provides day and nighttime active fire detection over land and water (from gas flares). The VNP14 product provides fire data continuity with NASA's EOS MODIS 1 km fire product. For more information visit University of Maryland VIIRS Active Fire Web page at http://viirsfire.geog.umd.edu/
Sounder SIPS: Suomi NPP CrIMSS Level 2 CLIMCAPS Normal Spectral Resolution: Cloud Cleared Radiances V2 (SNDRSNIML2CCPCCRN) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Normal Spectral Resolution (NSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 1305 NSR infrared sounding channels covering the longwave (655-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2155-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz.Cloud clearing is the process of computing the clear column radiance for a given channel n, and represents what the channel would have observed if the entire scene were cloud free. The entire scene is defined as the ATMS field of regard (FOR) which includes and array of 3x3 CrIS field of views (FOV). The basic assumption of cloud-clearing is that if the observed radiances in each field-of-view are different, the differences in the observed radiances are solely attributed to the differences in the fractional cloudiness in each field of view while everything else (surface properties and atmospheric state) is uniform across the field of regard. A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
Pre-Delta-X: UAVSAR Georeferenced Channel Maps, Atchafalaya Basin, LA, USA, 2016, V2
This dataset provides spatial data on water channels in the estuary of the Atchafalaya Basin of the Mississippi River Delta of coastal Louisiana. These Level-3 (L3) channel maps were developed from interferograms derived from Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) data collected on 2016-10-16 (low tides) and 2016-10-17 (high tides). The channel maps define open water paths in hydrodynamic models and are used to evaluate model performance. This is version 2 of this dataset. Data are provided in cloud optimized GeoTIFF format.
GEOS-Carb CASA-GFED Daily Fire and Fuel Emissions 0.5 degree x 0.5 degree V2 (GEOS_CASAGFED_D_FIRE) at GES DISC
This product provides Daily average wildfire emissions (FIRE) andfuel wood burning emissions (FUEL) derived from the Carnegie-Ames-Stanford-Approach – Global Fire Emissions Database version 3 (CASA-GFED3) model.The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing, quantifying, understanding, and predicting the evolution of global carbon sources and sinks through improved monitoring of carbon stocks and fluxes. The System will use the full range of NASA satellite observations and modeling/analysis capabilities to establish the accuracy, quantitative uncertainties, and utility of products for supporting national and international policy, regulatory, and management activities. CMS will maintain a global emphasis while providing finer scale regional information, utilizing space-based and surface-based data and will rapidly initiate generation and distribution of products both for user evaluation and to inform near-term policy development and planning.
PhenoCam Dataset v2.0: Vegetation Phenology from Digital Camera Imagery, 2000-2018
This data set provides a time series of vegetation phenological observations for 393 sites across diverse ecosystems of the world (mostly North America) from 2000-2018. The phenology data were derived from conventional visible-wavelength automated digital camera imagery collected through the PhenoCam Network at each site. From each acquired image, RGB (red, green, blue) color channel information was extracted and means and other statistics calculated for a region-of-interest (ROI) that delineates an area of specific vegetation type. From the high-frequency (typically, 30 minute) imagery collected over several years, time series characterizing vegetation color, including canopy greenness, plus greenness rising and greenness falling transition dates, were summarized over 1- and 3-day intervals.
MASTER: Airborne Science, California-Nevada-New Mexico, May, 2002, V2
This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected during seven flights aboard a DOE B-200 aircraft over California, New Mexico, and Nevada, U.S., on 2002-05-14 to 2002-05-24. This deployment was coordinated by the U.S. Department of Energy's Remote Sensing Laboratory (RSL) located at Nellis Air Force Base near Las Vegas, Nevada. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 10-meter spatial resolution. The L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.
Sounder SIPS: AQUA AIRS IR MW Level 3 CLIMCAPS : Specific Quality Control Gridded Daily V2 (SNDRAQIML3SDCCP) at GES DISC
WARNING: Users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products applying the specific quality control (QC) methodology. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.
GLDAS Catchment Land Surface Model L4 3 hourly 1.0 x 1.0 degree Early Product V2.1 (GLDAS_CLSM10_3H_EP) at GES DISC
NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is an Early Product for GLDAS-2.1 Catchment 1.0 degree 3-hourly dataset. The GLDAS-2.1 3 hourly 1.0 degree product was simulated with the Catchment-F2.5 Land Surface Model in Land Information System (LIS) Version 7. The data product contains 34 land surface fields from January 2000 to present. The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards.The GLDAS-2.1 products supersede their corresponding GLDAS-1 products.The GLDAS-2.1 data are archived and distributed in NetCDF format.
Sounder SIPS: AQUA AIRS IR-only Level 2 CLIMCAPS: retrieved atmospheric state V2.1 (SNDRAQIL2CPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS CLIMCAPS Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphereprofiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.An AIRS level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Sounder SIPS: JPSS-1 CrIS Level 3 Comprehensive Quality Control Gridded Monthly CLIMCAPS V2 (SNDRJ1IML3CMCCP) at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This monthly one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Comprehensive QC accepts a retrieval if the profile is good to the surface and ensures consistent analysis across all levels and variables.
GHRSST NOAA/STAR ACSPO v2.80 0.02 degree L3S Dataset from mid-Morning LEO Satellites (GDS v2)
NOAA STAR produces two lines of gridded 0.02 degree super-collated L3S LEO sub-skin Sea Surface Temperature (SST) datasets, one from the NOAA afternoon JPSS (L3S_LEO_PM) satellites and the other from the EUMETSAT mid-morning Metop (L3S_LEO_AM) satellites. The L3S_LEO_AM is derived from three Low Earth Orbiting (LEO) Metop-FG satellites: Metop-A, -B and -C . The Metop-FG satellite program was jointly established by the European Space Agency (ESA) and the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT). The US National Oceanic and Atmospheric Administration (NOAA) under the joint NOAA/EUMETSAT Initial Joint Polar System Agreement, has contributed three Advanced Very High Resolution Radiometer (AVHRR) sensors capable of collecting and transmitting data in the Full Resolution Area Coverage (FRAC; 1km/nadir) format.The L3S_LEO_AM dataset is produced by aggregating three L3U datasets from MetOp-FG satellites (MetOp-A, -B and -C; all hosted in PO.DAAC) and covers from Dec 2006-present. The L3S_LEO_AM SST dataset is reported in two files per 24-hour interval, daytime and nighttime (nominal Metop local equator crossing times around 09:30/21:30, respectively), in NetCDF4 format, compliant with the GHRSST Data Specification version 2 (GDS2). The Near Real Time (NRT) L3S-LEO data are archived at PO.DAAC with approximately 6 hours latency, and then replaced by the Re-ANalysis (RAN) files about 2 months later, with identical file names. The dataset is validated against quality controlled in situ data, provided by the NOAA in situ SST Quality Monitor system (iQuam; Xu and Ignatov, 2014), and monitored in another NOAA system, SST Quality Monitor (SQUAM; Dash et al, 2010). The L3S SST imagery and local coverage are continuously evaluated, and checked for consistency with other Level 2, 3 and 4 datasets in the ACSPO Regional Monitor for SST (ARMS) system. NOAA plans to include data from other mid-morning platforms and sensors, such as MetOp-SG METImage and Terra MODIS, into L3S_LEO_AM. More information about the dataset can be found under the Documentation and Citation tabs.
Sentinel-5P TROPOMI Total Ozone Column 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__O3_TOT_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.Starting from July 13th in 2020, five Sentinel-5P TROPOMI level-2 products including total and tropospheric column ozone, sulfur dioxide, CLOUD, and formaldehyde have been generated in processor version 2.For data before August 6th of 2019, please check S5P_L2__O3_TOT_1 data collection.For data between August 6th of 2019 and July 13th of 2020, please check S5P_L2__O3_TOT_HiR_1 data collection.For data after July 13th of 2020, please check S5P_L2__O3_TOT_HiR_2 data collection.The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.This total column ozone product (S5P_L2__O3_TOT, aka ESA's S5P_L2__O3____) applies the the Direct-fitting algorithm (S5P_TO3_GODFIT), comprising a non-linear least squares inversion by comparing the simulated and measured backscattered radiances. The main products include total vertical column ozone, ozone effective temperature, and the error information in NetCDF-4 format.
Multi-Satellite Air Quality Sulfur Dioxide (SO2) Database Long-Term L4 Global V2 (MSAQSO2L4) at GES DISC
These data are a part of Multi-Decadal Sulfur Dioxide (SO2) Climatology from Satellite Instruments (MEaSUREs-12-0022 project). Version 2 of the global catalogue of emissions from large SO2 point sources combines data from the Ozone Monitoring Instrument (OMI) on NASA's EOS Aura spacecraft, the Ozone Mapping and Profiler Suite (OMPS) on the NASA-NOAA Suomi National Polar-orbiting Partnership (SNPP), and the TROPOspheric Monitoring Instrument (TROPOMI) on the ESA/Copernicus Sentinel-5 Precursor (S-5P) spacecraft.The catalogue MSAQSO2L4 file contains the site coordinates, source type, country, source name, annual SO2 emissions, annual emission uncertainties, and the number of satellite pixels in the fitting area for three satellite instruments as well as for their weighted average.The emission estimates are based on operational version 2 OMI and OMPS Principal Component Analysis (PCA) retrieval algorithm SO2 slant column density (SCD) data (Li et al., 2020) as well as on new TROPOMI Covariance-Based Retrieval Algorithm (COBRA) SCD data (Theys et al., 2021). A single time-independent site-specific Air-Mass Factor (AMF) value for each site was calculated (McLinden et al., 2014) and applied consistently to each satellite SCD dataset to derive SO2 vertical column densities (VCDs=SCDs/AMFs). The emission estimate method is based on a fit of satellite VCDs to an empirical plume model developed to describe the SO2 spatial distribution near emission point sources. The plume model assumes that the SO2 concentrations emitted from a point source decline exponentially with distance and that they are affected by turbulent diffusion that can be described by a two-dimensional (2D) exponentially modified Gaussian function. The total SO2 mass is derived from the fit and the annual emission rate is calculated as the ratio between the total mass and the prescribed SO2 lifetime.
Lightning Instrument Package (LIP) IMPACTS V2
The Lightning Instrument Package (LIP) IMPACTS dataset consists of electrical field measurements of lightning and navigation data collected by the Lightning Instrument Package (LIP) flown onboard the NASA ER-2 aircraft during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) field campaign. IMPACTS was a three-year sequence of winter season deployments conducted to study snowstorms over the U.S. Atlantic coast (2020-2023). IMPACTS aimed to (1) Provide observations critical to understanding the mechanisms of snowband formation, organization, and evolution; (2) Examine how the microphysical characteristics and likely growth mechanisms of snow particles vary across snowbands; and (3) Improve snowfall remote sensing interpretation and modeling to advance prediction capabilities significantly. The V2 LIP IMPACTS data have been further filtered to remove field mill offsets that were identified in the prior V1 data. These data are available from January 15, 2020, through March 2, 2023, in ASCII format.
Sounder SIPS: JPSS-1 CrIS Level 2 CLIMCAPS: Atmosphere cloud and surface geophysical state V2 (SNDRJ1IML2CCPRET) at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products. A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Sounder SIPS: Suomi NPP CrIMSS Level 3 Specific Quality Control Gridded Monthly CLIMCAPS Full Spectral Resolution V2 (SNDRSNIML3SMCCP) at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Full Spectral Resolution (FSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2000-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This monthly one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.
GPS Radio Occultation Boundary Layer Depth Annual L3 V2 (GPSROZPBLA) at GES DISC
This dataset provides an annual average climatology of planetary boundary layer (PBL) height derived from COSMIC/FORMOSAT-3, TerraSAR-X, KOMPSAT-5, and PAZ Global Positioning System (GPS) radio occultation (RO) measurements. The COSMIC/FORMOSAT-3 mission consists of a six-satellite constellation launched in 2006. Each satellite carries an Integrated GPS Occultation Receiver (IGOR) GPS receiver and is equipped with fore and aft looking antenna to track both setting and rising occultations. The constellation provides globally distributed measurements across different local times. The instrument tracks the L-band microwave signal broadcast by a GPS satellite in a limb-viewing geometry. The IGOR receivers are capable of tracking the GPS signals in open loop through the middle to lower troposphere, which is essential for obtaining data with high quality for PBL height estimation, especially at low latitudes. The refractivity profiles form the basis for this PBL height product. For each occultation, the PBL height is calculated as the height where the vertical gradient of the refractivity (dN/dz) is minimum. This algorithm is designed to locate the height where a large vertical change in refractivity occurs, corresponding to the transition from the free troposphere to the PBL. More details can be found in Ao et al. (2012). This is the latest version of this collection which supercedes previous versions.
OMPS-NPP L3 NM Ozone (O3) Total Column 1.0 deg grid daily V2
The OMPS-NPP L3 NM Ozone (O3) Total Column 1.0 deg grid daily product provides total ozone measurements from the Ozone Mapping and Profiling Suite (OMPS) Nadir-Mapper (NM) instrument on the Suomi-NPP satellite.The level-3 gridding algorithm is used to combine the orbital OMPS cross track measurements into a daily map product with a fixed global grid. Grid cells are computed as weighted averages of a given parameter derived for the field-of-views that overlay the given cell. The current version of this product includes UV aerosol index and reflectivity at 331 nm retrievals as well. Each granule contains data for a full day. Spatial coverage is global (-90 to 90 degrees latitude), with a resolution of 1.0 degree in longitude and 1.0 degree in latitude, and array size of 360 by 180. The files are written using the Hierarchical Data Format Version 5 or HDF5.
GLDAS VIC Land Surface Model L4 3 hourly 1.0 x 1.0 degree Early Product V2.1 (GLDAS_VIC10_3H_EP) at GES DISC
NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is an Early Product for GLDAS-2.1 VIC 1.0 degree 3-hourly dataset. The GLDAS-2.1 VIC 1.0 degree 3-hourly data product was simulated with the VIC Land Surface Model 4.1.2 in Land Information System (LIS) Version 7. The data product contains 34 land surface fields from January 2000 to present.The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards.The GLDAS-2.1 products supersede their corresponding GLDAS-1 products.The GLDAS-2.1 data are archived and distributed in NetCDF format.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.