Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
10,554
datasets available to search
ShareScore release 0.9.0
Dataset results
10,554 results for “measure”
Global soil methane uptake inferred from global field measurements
<p>Soil methane (CH<sub>4</sub>) uptake is an important sink in the global methane budget. However, both the magnitude and the dynamics of global soil CH<sub>4</sub> uptake remain highly uncertain. Here, by compiling an extensive data set of 6899 site-months of soil CH<sub>4</sub> fluxes observed at 682 sites, we use a machine-learning algorithm (Random Forest) to provide a data-driven estimate of global soil CH<sub>4</sub> uptake each month from 1981 to 2018. Varying the combination of predictors, we construct 9 different simulations for three landcover types (Forests, Grasslands, Croplands). The dataset uploaded is the mean of 9 simulations after calculating the area-weighted average of CH<sub>4 </sub>flux of three landcover types.</p>
Level 2 spectra of the global solar irradiance in the wavelength range 290 - 500 nm measured at Aosta - Saint Christophe, Italy by the Bentham DTMc300 with serial number 5541 in 2006 - 2019
<p>The provided dataset includes the Level 2 <strong>spectral measurements</strong> (in Watt/m<sup>2</sup>/nm) of the solar irradiance in the range 290 - 500 nm, performed by the Bentham DTMc300 spectroradiometer with serial number 5541. The particular instrument performs automated continuous, high quality measurements at Aosta - Saint Christophe, Italy (45.7° N, 7.4° E, 570 m a.s.l.) since 2006. The Level 2 spectra are re-evaluated and homogenized and are currently available for the period 24 July 2006 - 8 July 2019. Each file contains the spectra for one day. The time (in UTC) for the measurements at 290, 400, and 500 nm is also provided for each spectral scan so that the user has also information for the duration of each scan.</p> <p>The daily <strong>noon UV index</strong> is also provided for the same period in the file "<strong>aao_noon_uvi_l2.dat</strong>". Erythemal doses have been calculated by weighting each spectrum with the CIE (1999) effective spectrum, and then integrating in the range 290 - 400 nm. Then the UV index has been calculated by dividing erythemal dose (in mWatt/m<sup>2</sup>) by 25. The noon UV index for each day has been calculated as the average of available measurements for ±15 minutes around the exact local noon.</p> <p>For further information for file format and contents please see the <strong>readme.txt</strong> file.</p> <p>Reference</p> <p>CIE: CIE S007/E-1998 Erythema reference action spectrum and standard erythema dose, Color Research & Application, 24, 158-158, 10.1002/(sici)1520-6378(199904)24:2<158::aid-col11>3.0.co;2-4, 1999.</p>
Datasets in 'Methodologies in the Identification, Analysis, and Measurement of Visual Pollution: The Case Study of Intramuros'
<p>Dataset tabulated in all the methods and procedures done in the study 'Methodologies in the Identification, Analysis, and Measurement of Visual Pollution: The Case Study of Intramuros'.</p>
DREP and micro-burst events measured with the Compton Spectrometer and Imager COSI
<p>The Compton Spectrometer and Imager, COSI, is a Compton telescope operating in the 0.2-5 MeV energy range and capable of imaging, spectroscopy and polarimetry of astrophysical sources. Such capabilities are made possible by COSI's twelve germanium cross-strip detectors, which provide for high efficiency, high resolution spectroscopy, and precise 3D positioning of photon interactions. This directory gathers the heliophysics data observed during the 2016 COSI balloon flight. In May 2016, COSI took flight from Wanaka, New Zealand, on a NASA super-pressure balloon. For 46 days, COSI floated at a nominal altitude of 33.5 km, continually telemetering science data in real-time. The payload made a safe landingin Peru, and the hard drives containing the full raw data set were recovered.<br> <br> The following files are included in this directory:</p> <p>megalib_v3.02.zip:<br> All the software (MEGAlib) to analyze this data</p> <p>massmodel.tar.gz:<br> The COSI-2016 mass model to analyze this data</p> <p>COSI2016_GeD_L3EventList_DREP_20160521_v04.fits.gz:<br> A level 3 event list from May 21th 2016 containing a multi-peak DREP event.</p> <p>COSI2016_GeD_L3EventList_DREP_20160530_v04.fits.gz<br> A level 3 event list from May 30th 2016 containing 2 DREP complexes and a micro-burst event.<br> <br> <br> The latest version of the data analysis software can be found here:<br> https://github.com/zoglauer/megalib.git<br> Documentation on how to use the software can be found in the "doc" directory of MEGAlib, especially in the file Mimrec.pdf. Before usage with MEGAlib, the data needs to be converted into MEGAlib's tra file format, for example:<br> <br> TraFitsConverter -f COSI2016_GeD_L3EventList_DREP_20160530_v04.fits.gz -g COSI.DetectorHead.geo.setup<br> <br> The mass model files "COSI.DetectorHead.geo.setup" can be found in the massmodel.zip file.<br> <br> </p>
data set related to article Actigraph assessment for measuring upper limb activity in unilateral cerebral palsy
<pre>This record contains raw data related to article Actigraph assessment for measuring upper limb activity in unilateral cerebral palsy</pre>
Volumetric measurements of the flow over a slanted cylinder
<p>Thank you for the interest in the experimental data set used in my dissertation! This data set was acquired during my PhD dissertation work, published in 2020.<br> For details of the acquisition and interpretation, please check the dissertation referenced below:</p> <p>"Characterization of the slanted cylinder afterbody wake and goal-based experimental optimization of open-loop wake control" - Fernando Zigunov - Florida State University - PhD Dissertation - 2020</p> <p>Please cite this repository and/or the dissertation document if you use the data set in your work!</p> <p>_________________________<br> This data set contains flow visualization and pressure measurements performed on a cylinder with a slanted afterbody, <br> a simplified geometry used for aircraft fuselage "tail" studies. It contains Particle Image Velocimetry (PIV) data with<br> volumetric mesurements, which allow for great insight of the flow field. </p> <p>Please contact fzigunov@fsu.edu for queries and questions.</p>
Measuring Unique Changes: How do Distinct Changes Affect the Size and Lifetime of Pull Requests?
<p>Size metrics are commonly cited features in studies that analyze influencing factors on pull request lifetime. These metrics are also important for integrators, as based on them, they may prefer to prioritize pull requests easy to assess. However, code changes that form pull requests may not be unique, and repetitive changes may represent less complexity than expected by considering size metrics like lines of code or source files. The goal of this study is to analyze the influence of unique changes over pull requests relative to its size and lifetime. We collected data from 83,000+ pull requests of 26 projects hosted on GitHub. Also, we proposed a metric called unique changes rate to measure the proportion of unique changes over the total changes made by a pull request. We conducted experiments with Random Forest regression models and association rules to examine the influence of unique changes rate. Results show that unique changes have more influence over the lifetime of large pull requests, is determined mainly by the number of source files, and low levels of unique changes rate affect more the relationship between pull request size and lifetime than high levels. We conclude that unique changes can figure as an interesting feature in the context of the pull request lifetime. Results indicate that unique changes may increase or decrease the influence of pull request size on its lifetime. Our work has implications for researchers and core team members in software projects since unique changes represent helpful information.</p>
Experimentally measured group direct benefits according to worker density explain group living of the termite Reticulitermes chinensis
<p>The evolution of cooperation requires more benefits of group living than solitary lifestyle. However, to some degree, our understanding about the benefits is hindered by abstract debates over theoretical and experimental evidences of individual selection or group selection because it is difficult to examine the actual benefits at the group level. Moreover, group density is a crucial ecological factor which deeply affects group reproduction and survival, few studies have been performed in social insects. Here, we study the effects of worker density on group direct benefits in the termite species <i>Reticulitermes chinensis</i>. The termite <i>R.</i> <i>chinensis</i><i> </i>is<i> </i>an ideal model which lives with a high worker density in wood. We used the quantity of eggs and the total biomass (biomass of all group members) accumulation as two components of group benefits. We investigated the group benefits in the context of worker density according to eleven worker densities. And we measured the group benefits and the resource consumption with the same group members in two types of artificial nest areas. Moreover, we counted the stomodeal trophallaxis occurrences from any workers to queens under three worker densities to explore the degree of cooperation according to worker density. We found that both the number of eggs and the total biomass accumulation significantly increased with increasing worker density in groups. Furthermore, the consumption of resources was similar between groups with the same number of individuals gathered in small or large nest areas, but the production of eggs and the biomass accumulation were higher in groups of small nest areas than in large nest areas. Additionally, we found the stomodeal trophallaxis behavior significantly increased in higher worker density groups. Our results suggest that the group benefits influenced by the high worker density may at least partially explain the group living of eusocial insects in ecology.</p>
A Miniature Shielded-loop Active H-field Probe Design for Near-field Measurement
<p>In the "A Miniature Shielded-loop Active H-field Probe Design for Near-field Measurement", this includes all the figures.</p>
Data and masks for publication "Thermal intermodulation noise in cavity-based measurements"
<p>Raw measurement data, analysis code to reproduce the manuscript figures, and the GDS designs of PnC membranes</p>
An evaluation of inbreeding measures using a whole genome sequenced cattle pedigree
<p>The estimation of the inbreeding coefficient (F) is essential for the study of inbreeding depression (ID) or for the management of populations under conservation. Several methods have been proposed to estimate the realized F using genetic markers, but it remains unclear which one should be used. Here we used whole-genome sequence data for 245 individuals from a Holstein cattle pedigree to empirically evaluate which estimators best capture homozygosity at variants causing ID, such as rare deleterious alleles or loci presenting heterozygote advantage and segregating at intermediate frequency. Estimators relying on the correlation between uniting gametes (F<sub>UNI</sub>) or on the genomic relationships (F<sub>GRM</sub>) presented the highest correlations with these variants. However, homozygosity at rare alleles remained poorly captured. A second group of estimators relying on excess homozygosity (F<sub>HOM</sub>), homozygous-by-descent segments (F<sub>HBD</sub>), runs-of-homozygosity (F<sub>ROH</sub>) or on the known genealogy (F<sub>PED</sub>) was better at capturing whole genome homozygosity, reflecting the consequences of inbreeding on all variants, and for young alleles with low to moderate frequencies. The results indicate that F<sub>UNI</sub> and F<sub>GRM</sub> might present a stronger association with ID. However, the situation might be different when recessive deleterious alleles reach higher frequencies, such as in populations with a small effective population size. For locus specific inbreeding measures or at low marker density, the ranking of the methods can also change as F<sub>HBD </sub>makes better use of the information from neighbouring markers. Finally, we confirmed that genomic measures are in general superior to pedigree-based estimates. In particular, F<sub>PED</sub> was uncorrelated with locus specific homozygosity.</p>
Data and analysis script for channel measurement campaign at POWDER-RENEW using Iris SDRs
<p>This repository contains our raw datasets from channel measurements performed at the University of Utah campus. In addition, we have included a document that explains the setup and methodology used to collect this data, as well as a very brief discussion of results. <br> File organization:<br> * documentation/ - Contains a .docx with the description of the setup and evaluation.<br> * data/ - HDF5 files containing both metadata and raw IQ samples for<br> each location at which data was collected. Notice we collected data at 14 <br> different client locations. See map in the attached docx (skipped locations 12 and 16).<br> We deployed 5 different receivers at 5 different rooftops. Due to resource constraints,<br> one set of files contains data from 4 different locations whereas another set <br> contains information from the single remaining location.<br> <br> We have developed a set of python scripts that allow us to parse and analyze the data.<br> Although not included here, they can be found in our public repository: <a href="https://github.com/renew-wireless/RENEWLab">https://github.com/renew-wireless/RENEWLab</a><br> You can find the top script <a href="https://github.com/renew-wireless/RENEWLab/blob/master/PYTHON/IrisUtils/deployment_tool.py">here</a>.</p> <p>For more information on the POWDER-RENEW project please visit the <a href="https://powderwireless.net/">POWDER website</a>.<br> The RENEW part of the project focuses on the deployment of an open-source massive MIMO system.<br> Please visit our <a href="https://renew-wireless.org/">website </a>for more information.</p>
Intrinsic elastic anisotropy of Westerly granite observed by ultrasound measurements, microstructural investigations and neutron diffraction
<p>Westerly granite (WG) has been accepted as an isotropic homogeneous rock. Here we return to WG and observe significant elastic anisotropy using multidirectional ultrasonic sounding on spherical samples at pressures up to 400 MPa. Thermal treatment of WG leads to formation of microcracks that reduce elastic wave velocities and increase its elastic anisotropy. The 3D distribution of P-wave velocities at low pressure is close to orthorhombic symmetry. Application of hydrostatic pressure closes most of thermally induced microcracks and decreases elastic anisotropy of WG, but at high pressure the anisotropy is practically reversed compared to low pressure: maximum P-wave velocity direction at low pressures is near minimum velocity direction at high pressure and vice versa. To understand this effect, microstructures of the rock were investigated by optical and scanning electron microscopy. Preferred orientations of four major rock-forming minerals – quartz, orthoclase, plagioclase and biotite – were measured by time-of-flight neutron diffraction, which confirms significant crystal alignment. All these data were used to numerically model anisotropic elastic properties of WG. It is shown that WG possesses weak intrinsic elastic anisotropy related mainly to the preferred orientation of feldspars formed during igneous crystallization. Observed microcracks are mostly related to the cleavage planes of feldspars and biotite, and thus also demonstrate preferred orientation. Higher preheating temperatures produce larger quantity of longer microcracks. These microcracks act against the weak intrinsic elastic anisotropy of WG, and define the elastic anisotropy at low pressures.</p>
EMUE-RMG-2-Pressure drop measurement
<p>Pressure Drop Measurement</p> <p>This example demonstrates how correlations can sometimes be removed from an uncertainty evaluation by modifying the measurement equation so that strongly correlated quantity estimates do not appear together. This is demonstrated by an example considering the pressure drop in a pressurised vessel, in which the effect of correlation between temperature measurements is removed. In this example the uncertainty associated with an estimate of pressure drop is appreciably smaller when correlation is taken into consideration.</p> <p>Files contained in dataset are:</p> <ul> <li>EMUE-RMG- Pressure drop measurement – UKAS.pdf,</li> <li>EMPIR.jpg- figure file,</li> <li>EMUELogo-03.jpg- figure file,</li> <li>Example_A.tex: LaTeX file to be compiled in order to produce EMUE-RMG- Pressure drop measurement – UKAS.pdf,</li> <li>MCMandGUMnewWithCorr.jpg: figure file,</li> <li>MCMandGUMnewWithoutCor.jpg: figure file,</li> <li>reference.bib: bibliography file,</li> <li>Compendium.bib: bibliography file,</li> <li>GUM_WithCorrelations.mat /GUM_WithoutCorrelations.mat: MATLAB function that calculates measurement uncertainty by following the GUM principle (with or without correlations),</li> <li>GUMSupp1_WithCorrelations.mat /GUMSupp1_WithoutCorrelations.mat: MATLAB function that calculates measurement uncertainty by following GUM Supplement 1 principle (with or without correlations),</li> <li>InputData_WithCorrelations.mat /InputData_WithoutCorrelations.mat: MATLAB function for input data (with or without correlations),</li> <li>PlotGUM_WithCorrelations.mat /PlotGUM_WithoutCorrelations.mat: MATLAB function for plotting the results (with or without correlations),</li> <li>PlotGUMAndMCM_WithCorrelations.mat /PlotGUMAndMCM_WithoutCorrelations.mat: MATLAB function for plotting the results (with or without correlations),</li> <li>Results_WithCorrelations.mat /Results_WithoutCorrelations.mat: MATLAB function for displaying the results (with or without correlations),</li> <li>SetFormattingSymbols_WithCorrelations.mat /SetFormattingSymbols_WithoutCorrelations.mat: MATLAB function for setting formatting symbols,</li> <li>UKASPressureDropExample_WithCorrelations.mat /UKASPressureDropExample_WithoutCorrelations.mat: Model developed in MATLAB that calculates estimated pressure drop and the associated measurement uncertainty (GUM and Monte Carlo method). One file calculates the uncertainties with and the other without correlations. These files use MATLAB functions (developed for this example) that are listed above: SetFormattingSymbols, InputData, GUM, GUMSupp1, Results, PlotGUMAndMCM, PlotGUM.</li> </ul>
Data from: Measured perceptual nonlinearities show how ON-OFF asymmetric processing improves motion estimation in natural scenes
Animals detect motion using a variety of visual cues that reflect regularities in the natural world. Experiments in animals across phyla have shown that motion percepts incorporate both pairwise and triplet spatiotemporal correlations that could theoretically benefit motion computation. However, it remains unclear how visual systems assemble these cues to build accurate motion estimates. Here we use comprehensive measurements of fruit fly motion perception to show how flies combine local pairwise and triplet correlations to reduce variability in motion estimates across natural scenes. By generating synthetic images with statistics controlled by maximum entropy distributions, we showed that the observed improvement occurs only when light-dark asymmetries mimic natural ones. Thus, fly behavior suggests that asymmetric ON-OFF processing is tuned to the particular statistics of natural scenes. Since all animals encounter the world's light-dark asymmetries, many visual systems are likely to use asymmetric ON-OFF processing to improve motion estimation.
Foliar summer frost resistance measured via electrolyte leakage approach as related to plant distribution, community composition and performance
1. Frost resistance (FR) is a fundamental process determining various aspects of plant life. Measurements of FR remain challenging as existing methods are time- and labour-intensive. 2. Here, we test the applicability of foliar summer FR measured via the 'electrolyte leakage' approach (FR<sub>PEL</sub>), a simple and inexpensive technique so far underused in ecological research to estimate FR. We tested the ability of this trait to predict i) species occurrence, ii) community composition along an elevational gradient, and iii) analysed its relationship to 9 other traits (SLA, C<sub>mass</sub>, N<sub>mass</sub>, P<sub>mass</sub>, Ca<sub>mass</sub>, Mg<sub>mass</sub>, K<sub>mass</sub>, canopy height and the ability to form rosettes) related to plant performance. We studied 183 vascular species occurring at 37 sites, which we also analysed in terms of species composition along an elevation gradient from 656 to 2363 m a.s.l. in the Bavarian Alps, Germany. 3. Species' FR<sub>PEL</sub> values correlated significantly with the species occurrence along the elevational gradient. However, this relationship was weak as it explained only 10% in the variation of the Landolt indicator values, a proxy for species geographic ranges. We found a strong positive relationship between community-weighted FR<sub>PEL</sub> values and elevation suggesting a strong environmental filtering of this trait that removes species with low FR from the local species pool at high elevations. The community functional diversity of FR<sub>PEL</sub> significantly increased with increasing elevation suggesting a higher trait divergence in harsher climates. We found significant negative relationships between FR<sub>PEL</sub> and specific leaf area, canopy height and the ability to form leaf rosettes, indicating a trade-off in plants between the investment in conservative strategies, in our case FR, and fast resource acquisition. 4. Our study highlights the potential of using FR<sub>PEL</sub> more frequently in ecological research as we were able to re-confirm three patterns inferred by more precise yet time-consuming and labour-intensive approaches. We demonstrate that FR<sub>PEL</sub> can be used to predict species occurrence and infer assembly rules along elevational gradients. Furthermore, we found that FR<sub>PEL</sub> is linked to plant functional traits associated with plant performance and morphological features of the plants. However, the trait's predictive power varied greatly among the study objectives and levels.
Radiomag Interlaboratory Comparison of Magnetic Hyperthermia Characterisation Measurements: Data
<p>These files contain the raw measurement data reported for the Radiomag interlaboratory comparison of magnetic hyperthermia characterisation measurements. Each heating curve for samples containing magnetic nanoparticles is presented in a separate excel file detailing the corrected-slope technique (CST) recalculation of the specific loss power and intrinsic loss power for that measurement as described in the manuscript. The measurements are organised into separate folders for Rounds 1 and 2 of the interlaboratory study, with further subfolders dividing the results for samples 1 and 2. Round 2 also includes the results for the “blank” pure water sample which was included in this Round. For each laboratory there is 3 repeated measurements of each sample during each round the study.</p>
FT44 Scherer (3) 4 key fagottino: measurements, photos, endoscopic video
<p>Dataset of FT44 Scherer (3) 4-key fagottino containing detailed external and internal measurements, photos, and an endoscopic video. </p>
Data from: First measurements of field metabolic rate in wild juvenile fishes show strong thermal sensitivity but variations between sympatric ecotypes
<p>The relationship between physiology and temperature has a large influence on population-level responses to climate change. In natural settings, direct thermal effects on metabolism may be exaggerated or offset by behavioural responses influencing individual energy balance. Drawing on a newly developed proxy, we provide the first estimates of the thermal performance curve of field metabolism in a wild fish. We investigate the thermal sensitivity of field metabolic rate in two sympatric, genetically distinct ecotypes of Atlantic cod from the Skagerrak coast of southern Norway. The combined ecotype median of field metabolic rate increased with increasing temperature until around 16°C, coincident with the thermal optimum for growth for juvenile Atlantic cod. Individual cod experienced temperatures in excess of the thermal optimum for field metabolic rate, indicating some degree of thermal limitation of field metabolism in a complex natural environment with the potential for thermal refugia. The two cod ecotypes showed different thermal performance curves for field metabolic rate, revealing that genetic components to temperature sensitivity persist beyond acclimation effects. The cold-adapted fjord ecotype maintained higher field metabolic rates at cooler temperatures than the warm-adapted North Sea ecotype, which showed clear preference for warmer waters around the thermal optimum. Field metabolic rates of the two ecotypes were strongly influenced by year and location of sampling, implying more complex behavioural responses to environmental conditions. We emphasise that the energy uses reflecting physiological conditions in the field should be considered in the evaluation of the effect of climatic variables on fish population dynamics and demonstrate that otolith isotopes provide an analytical framework to answer this question.</p>
Measurements of the solar wind propagation delay for L1 to Earth based on ACE and ground-based magnetometer data
<p>This database is the basis for the analysis described in the manuscript</p> <p>'Timing of the solar wind propagation delay between L1 and Earth based on machine learning'</p> <p>published in Journal of Space Weather and Space Climate.</p> <p> </p> <p><a href="https://doi.org/10.1051/swsc/2021026">https://doi.org/10.1051/swsc/2021026</a></p> <p> </p> <p>The database contains the times of 380 interplanetary shocks detected at ACE (T_ACE) which also caused a sudden impulse (T_SI) in the magnetosphere based on ground-based magnetometer data. This information can be found in 'measurement_SW_propagation.txt'.</p> <p>final_learningset_SWdelay.pickle contains the corresponding ACE data (solar wind speed, ACE position) at time T_ACE for each of the 380 cases.</p> <p>The datafile can be loaded with Python as follows:</p> <p>import pickle<br> with open('final_learningset_SWdelay.pickle', 'rb') as f:<br> [learnvector_o,learnvector_m,learnvector_s,learnvector,timevector]=pickle.load(f)</p> <p> </p> <p>The content is described as follows:</p> <p>learnvector_o - contains a list of ACE data in its original form, ordering ['rx','ry','rz','vx','vy','vz']</p> <p>learnvector_m - median of each feature</p> <p>learnvector_s - standard deviation of each feature</p> <p>learnvector - contains an array of the standardized data, which have been used to train the ML models.</p> <p>timevector - contains an array with the vector delay in seconds(first column), flat delay in seconds (second column), and measured solar wind propagation delay in seconds (third column)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.