Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
10,554
datasets available to search
ShareScore release 0.9.0
Dataset results
10,554 results for “measure”
Impacts of speciation and extinction measured by an evolutionary decay clock
<p>The hypothesis that destructive mass extinctions enable creative evolutionary radiations (creative destruction) is central to classic concepts of macroevolution[1,2]. However, the relative impacts of extinction and radiation on the co-occurrence of species have not been directly quantitatively compared across the Phanerozoic eon. Here we apply machine learning to generate a spatial embedding (multidimensional ordination) of the temporal co-occurrence structure of the Phanerozoic fossil record, covering 1,273,254 occurrences in the Paleobiology Database for 171,231 embedded species. This facilitates simultaneous comparison of macroevolutionary disruptions, using measures independent of secular diversity trends. Among the 5% most significant periods of disruption, we identify the 'big five' mass extinction events[2], seven additional mass extinctions, two combined mass extinction–radiation events and 15 mass radiations. In contrast to narratives that emphasize post-extinction radiations[1,3], we find that the proportionally most comparable mass radiations and extinctions (such as the Cambrian explosion and the end-Permian mass extinction) are typically decoupled in time, refuting any direct causal relationship between them. Moreover, in addition to extinctions[4], evolutionary radiations themselves cause evolutionary decay (modelled co-occurrence probability and shared fraction of species between times approaching zero), a concept that we describe as destructive creation. A direct test of the time to over-threshold macroevolutionary decay[4] (shared fraction of species between two times ≤ 0.1), counted by the decay clock, reveals saw-toothed fluctuations around a Phanerozoic mean of 18.6 million years. As the Quaternary period began at a below-average decay-clock time of 11 million years, modern extinctions further increase life's decay-clock debt.</p>
Highly time-resolved measurements of element concentrations in PM10 and PM2.5: Comparison of Delhi, Beijing, London, and Krakow
<p>Data presented in the manuscript "Highly time-resolved measurements of element concentrations in PM10 and PM2.5: Comparison of Delhi, Beijing, London, and Krakow" (https://doi.org/10.5194/acp-2020-618) by Rai et al. (2020).</p>
Datasets of measurements of microplastics in the the Siberian Arctic seas
<p>Dataset chem.xlsx contains data on parameters (weight, size, polymer type, morphology) for each microplastic particle at different stations for both surface and subsurface samples.</p> <p>Dataset stations.xlsx contains data on abundance and weight concentrations of microplastics at the stations for both surface and subsurface samples.</p>
Data from: Designing monitoring protocols to measure population trends of threatened insects: a case study of the cryptic, flightless grasshopper Brachaspis robustus
<p>Statistically robust monitoring of threatened populations is essential for effective conservation management because the population trend data that monitoring generates is often used to make decisions about when and how to take action. Despite representing the highest proportion of threatened animals globally, the development of best practice methods for monitoring populations of threatened insects is relatively uncommon. Traditionally, population trend data for the Nationally Endangered New Zealand grasshopper <em>Brachaspis robustus</em> has been determined by counting all adults and nymphs seen on a single ~1.5 km transect searched once annually. This method lacks spatial and temporal replication, both of which are essential to overcome detection errors in highly cryptic species like <em>B</em>. <em>robustus</em>. It also provides no information about changes in the grasshopper's distribution throughout its range. Here, we design and test new population density and site occupancy monitoring protocols by comparing a) comprehensive plot and transect searches at one site and b) transect searches at two sites representing two different habitats (gravel road and natural riverbed) occupied by the species across its remaining range. Using power analyses, we determined a) the number of transects, b) the number of repeated visits and c) the grasshopper demographic to count to accurately detect long term change in relative population density. To inform a monitoring protocol design to track trends in grasshopper distribution, we estimated the probability of detecting an individual with respect to a) search area, b) weather and c) the grasshopper demographic counted at each of the two sites. Density estimates from plots and transects did not differ significantly. Population density monitoring was found to be most informative when large adult females present in early summer were used to index population size. To detect a significant change in relative density with power > 0.8 at the gravel road habitat, at least seventeen spatial replicates (transects) and four temporal replicates (visits) were required. Density estimates at the natural braided river site performed poorly and likely require a much higher survey effort. Detection of grasshopper presence was highest (<em>p</em><sub><em>g</em></sub> > 0.6) using a 100 m x 1 m transect at both sites in February under optimal (no cloud) conditions. At least three visits to a transect should be conducted per season for distribution monitoring. Monitoring protocols that inform the management of threatened species are crucial for better understanding and mitigation of the current global trends of insect decline. This study provides an exemplar of how appropriate monitoring protocols can be developed for threatened insect species.</p>
Pupil and masking responses to light as functional measures of retinal degeneration in mice Mus Musculus
<p><b>Background: </b>Pre-clinical testing of retinal pathology and treatment efficacy depends on reliable and valid measures of retinal function. The electroretinogram (ERG) and tests of visual acuity are the ideal standard, but can be unmeasurable while useful vision remains. Non-image-forming responses to light such as the pupillary light reflex (PLR) are attractive surrogates. However, it is not clear how accurately such responses reflect changes in visual capability in specific disease models. The purpose of this study was to test whether measures of non-visual responses to light correlate with previously determined visual function in two photoreceptor degenerations.</p> <p><b>Methods: </b>The sensitivity of masking behavior (light induced changes in running wheel activity) and the PLR were measured in 3-month-old wild-type mice (WT) with intact inner retinal circuitry, <i>Pde6b</i>-<i>rd1/rd1 </i>mice (<i>rd1</i>) with early and rapid loss of rods and cones, and <i>Prph2-Rd2/Rd2</i> mice (<i>Rd2</i>) with slowly progressing loss of rods and cones.</p> <p><b>Results: </b>In <i>rd1</i> mice, negative masking had increased sensitivity, positive masking was absent, and the sensitivity of the PLR was severely reduced. In <i>Rd2</i> mice, positive masking identified useful vision at higher light levels, but there was a limited decrease in the irradiance sensitivity of negative masking and the PLR, and the amplitude of change for both underestimated the reduction in irradiance sensitivity of image-forming vision.</p> <p><b>Conclusions: </b>Together these data show that in a given disease, two responses to light can be affected in opposite ways, and that for a given response to light, the change in the response does not accurately represent the degree of pathology. However, the extent of the deficit in the PLR means that even a limited rescue of rod/cone function might be measured by increased PLR amplitude. In addition, positive masking has the potential to measure effective treatment in both models by restoring responses or shifting thresholds to lower irradiances.</p>
Experimental data: measurement campaign Hintereisferner Experiment, HEFEX.
<p>The HEFEX micrometeorological measurement campaign was conducted during three weeks in August 2018. Measurement towers were installed on the 1. and 2. August and removed on 22. August. The measurement network consisted of five 3-m tripod towers located at an along- and an across-glacier transect to capture the spatial variations of the atmospheric flow system at the glacier and associated heat exchange processes. The across-glacier transect consisted of three turbulence towers installed from the peripheral zones of the glacier towards the centreline. The location of the across-glacier transect coincides with where the valley of Langtaufererjochferner discharges into the valley of the Hintereisferner glacier. In this area, thermal flows from the surrounding area were hypothesized to influence the surface of Hintereisferner. All stations were installed at comparatively flat areas of the glacier with slope angles varying between 6 and 8°. Measurement towers were installed directly at the ice surface. Due to pronounced changes in the ice surface caused by strong ice melt during the measurement campaign, frequent visual inspection and small adjustments to the location of the towers were essential for good data quality. This mainly consisted of repositioning the tower feet to ensure the tower stability and re-levelling the sensors. Post-processing of data, i.e. correction of data for height changes and rotation of the mast further ensured data quality</p>
Nonresonant Raman spectroscopy of isolated human retina samples complying with laser safety regulations for in vivo measurements
<p>Raman raw data for the paper "Nonresonant Raman spectroscopy of isolated human retina samples complying with laser safety regulations for in vivo measurements"</p> <ul> <li>two sets of unprocessed Raman spectra recorded under restricted conditions as seen in Figure 5(b)</li> <li>each spectrum was recorded at 785 nm with 1 mW laser power and 10 s integration time</li> </ul>
Experimental Data for "Seismic wave attenuation and dispersion due to partial fluid saturation: Direct measurements and numerical simulations based on X-Ray CT"
<p>Experimental Data from a Berea sandstone sample. Includes X-ray CT scans and mechanical response of sample.</p> <p>Abstract</p> <p>Quantitatively assessing seismic attenuation caused by fluid pressure diffusion (FPD) in partially saturated rocks is challenging because of its sensitivity to the spatial fluid distribution. To address this challenge we performed depressurisation experiments to induce the exsolution of carbon dioxide from water in a Berea sandstone sample. In a first set of experiments we used medical X-ray computed tomography (CT) to characterise the fluid distribution. At an equilibrium pressure of ~1 MPa and applying a fluid pressure decline rate of ~0.6 MPa per minute, we allowed a change in saturation of less than 1 %. The gas was heterogeneously distributed along the length of the sample, with most of the gas exsolving near the sample outlet. In a second set of experiments, at the same pressure and temperature, following a very similar exsolution protocol, we measured the frequency dependent attenuation and modulus dispersion between 0.1 and 1000 Hz using the forced oscillation method. We observed significant attenuation and dispersion in the extensional and bulk deformation modes, however not in the shear mode. Lastly, we use the fluid distribution derived from the X-ray CT as an input for numerical simulations of FPD to compute the attenuation and modulus dispersion. The numerical solutions are in close agreement with the attenuation and modulus dispersion measured in the laboratory. Our methodology allows for accurately relating attenuation and dispersion to the fluid distribution, which can be applied to improving the seismic monitoring of the subsurface.</p>
This dataset contains the measurement data and its metadata of the publication "Out-of-plane corrugations in graphene based van der Waals heterostructures".
<p>This dataset contains the measurement data and its metadata of the publication "Out-of-plane corrugations in graphene based van der Waals heterostructures".</p>
Data from: Temporal stability versus community matrix measures of stability and the role of weak interactions
<p>Relationships between different measures of stability are not well understood in part because empiricists and theoreticians tend to measure different aspects and most studies only explore a single form of stability. Using time-series data from experimental plankton communities, we compared temporal stability typically measured by empiricists (coefficient of variation of biomass) to stability measures typically measured by theoreticians derived from the community matrix (asymptotic resilience, initial resilience, and intrinsic stochastic invariability) using first-order multivariate autoregressive models (MAR). Community matrices were also used to derive estimates of interaction strengths between plankton groups. We found no relationship between temporal stability and stability measures derived from the community matrix. Weaker interaction strengths were generally associated with higher stability for community matrix measures of stability but were not consistently associated with higher temporal stability. Temporal stability and stability measures derived from the community matrix stability appear to represent different aspects of stability reflecting the multi-dimensionality of stability.</p>
Data for: Pendulum-based measurements reveal impact dynamics at the scale of a trap-jaw ant
<p>Small organisms can produce powerful, sub-millisecond impacts by moving tiny structures at high accelerations. We developed and validated a pendulum device to measure the impact energetics of microgram-sized trap-jaw ant mandibles accelerated against targets at 10<sup>5</sup> m s<sup>-2</sup>. Trap-jaw ants (<i>Odontomachus brunneus; </i>19 individuals; 212 strikes) were suspended on one pendulum and struck swappable targets that were either attached to an opposing pendulum or fixed in place. Mean post-impact kinetic energy (energy from strike converted to pendulum motion) was higher with a stiff target (21.0-21.5 µJ) than a compliant target (6.4-6.5<b> </b>µJ). Target mobility had relatively little influence. Mean contact duration of strikes against stiff targets was shorter (3.9-4.5 ms) than against compliant targets (6.2-7.9 ms). Shorter contact duration was correlated with higher post-impact kinetic energy. These findings contextualize and provide an energetic explanation for the diverse, natural uses of trap-jaw ant strikes such as impaling prey, launching away threats, and performing mandible-powered jumps. The strong effect of target material on energetic exchange suggests material interactions as an avenue for tuning performance of small, high acceleration impacts. Our device offers a foundation for novel research into the ecomechanics and evolution of tiny biological impacts and their application in synthetic systems.</p>
FD-detector: Dataset gathered running measurements in the wild and Emulations for validation
<p>This file contains two folders: the dataset and emulation setup.</p> <p>The dataset is composed of warts files, resulting from traceroutes run with Scamper on NLNOG RING nodes. On the other hand, the emulations were performed on GNS3.</p>
Measurement Report: Strong Impacts of Biomass Burning, Nitrogen Fertilization, and Fine Particles on Gas-phase Hydrogen Peroxide (H2O2)
<p>Measurement Report: Strong Impacts of Biomass Burning, Nitrogen Fertilization, and Fine Particles on Gas-phase Hydrogen Peroxide (H<sub>2</sub>O<sub>2</sub>)</p>
Measuring the distance and mass of galactic core-collapse supernovae using neutrinos
<p>This is the dataset and analysis scripts for the manuscript "Measuring the distance and mass of galactic core-collapse supernovae using neutrinos" (submitted to PRL, arXiv link to follow). </p>
Measurement of the B-band Galaxy Luminosity Function with Approximate Bayesian Computation
<p>In our recent paper Tortorelli et al. 2020 (arXiv: 2001.07727), we presented the first measurement in literature of galaxy population properties using the Approximate Bayesian Computation (ABC), specifically the B-band Galaxy Luminosity function. The novel methodology we developed that combines forward-modeling and ABC offers excellent prospects to robustly measure galaxy population properties as a function of redshift in large wide-field galaxy surveys, such as LSST and NGRST. The methodology has the advantage of overcoming part of the limitations that arise in wide-field galaxy studies, such as incorrect redshift estimation or separation of galaxies into red and blue. We forward model wide-field broad-band galaxy surveys using the fast image simulator UFig. We use ABC to constrain the galaxy population model parameters of the simulations and match data from the CFHTLS. We define a number of distance metrics between the simulated and the survey data. By exploring the parameter space of the galaxy population model through ABC to find the set of parameters that minimize these distance metrics, we obtain constraints on the LFs of blue and red galaxies as a function of redshift. We compare our results to other measurements, finding good agreement at all redshifts, for both blue and red galaxies. We also compare the redshift distribution we obtain applying the same cuts as the VIPERS survey on our image simulations, finding good agreement with survey data.</p>
STL files and data to support: Improvements in methods for measuring the volume conductivity of electrically conductive carbon powders
<p>Electrically conductive carbon powders are commonly used as filler materials in polymers to create electrically semi-conductive composite materials for use in battery electrodes and anti-static applications. Current methods for characterizing the conductivity of these powders use two pistons to compress the powders. Two-piston methods are known to underestimate conductivity. This study develops a guard-electrode method based on ASTM D257 to better characterize the bulk conductivity and impedance spectra of electrically conductive powders. The conductivity and impedance spectra of a highly conductive powder (copper powder) and a low conductivity powder (cellulose) were used to bound the conductivity of carbon black, graphite, and biochar. Powders were measured through a full range of compression with both the two-piston and the guard-electrode method. In all cases, measurements using the guard-electrode method have higher conductivity and lower impedance than the same powders measured using the two-piston method. The grain conductivity of the particles is obtained through fitting the relationship of conductivity versus packing fraction using the GEM equation. The guard-electrode method is shown to be more similar to established conductivity values as measured via a four-probe technique for copper and graphite then the two-piston method.</p>
Data from: Habitat specialization of birds in the Czech Republic: comparison of objective measures with expert opinion
CAPSULE: Expert-based classification of bird species as habitat specialists and as generalists agrees with objective measures of species' habitat requirements based on large-scale monitoring data. AIMS: To compare habitat specialization of 137 common bird species breeding in the Czech Republic using three different measures and to test their relationships to species' abundance and habitat associations. METHODS: Data on bird abundance and surveyed habitats were collected through a standardized monitoring scheme of common breeding species in the Czech Republic. From these data we calculated a quantitative species specialization index (SSI). Canonical correspondence analysis (CCA) was applied to calculate species' habitat niche breadth and the level of association of each species to the main habitats. A panel of 11 local bird experts classified each species as habitat generalist or habitat specialist. RESULTS: Species classified as habitat specialists by expert opinion showed higher habitat specialization according to the SSI, as well as according to CCA-based habitat niche breadth. These species were also more closely associated with one of the main habitat types. These relationships were significant even after controlling for abundance. CONCLUSIONS: As expert opinion accords with the level of species' habitat specialization expressed using two quantitative objective measures, we suggest that these characteristics reflect real interspecific variation in the breadth of habitat requirements in birds. Interspecific differences in habitat specialization are not caused solely by the variability in abundance among species.
Data from: The measurement of selection when detection is imperfect: how good are naïve methods?
The life spans of animals can be measured in natural populations by uniquely marking individuals and then releasing them into the field. Selection on survival (a component of fitness) can subsequently be quantified by regressing the life spans of these marked individuals on their trait values. However, marked individuals are not always seen on every subsequent catching occasion, and for this reason, imperfect detection is considered a problem when estimating survival selection in natural populations. Capture–mark–recapture methods have been advocated as a powerful means to correct for imperfect detection. Here, we use simulated and field data sets to evaluate the effect of assuming perfect detection ('naïve methods'), when detection is really imperfect. We compared the performance of the naïve methods with methods correcting for imperfect detection (mark–recapture methods, or MR). Although the effects of trait-dependent recapture probability are mitigated when recapture probability is high, mark–recapture methods still provide the safest choice when recapture probability might be trait-dependent. In our simulations, mark–recapture methods had a power advantage over naïve methods, but all methods lost statistical power at low recapture probabilities. The main advantage of mark–recapture methods over naïve methods is the ability to control for hidden trait-dependent recapture probability, as it is often hard to tell a priori if trait dependence is an issue in a particular study. However, when trait-dependent recapture probability is weak, naïve methods and mark–recapture methods perform similarly as long as recapture rates do not become too low, and the main problem of survival selection studies is still low statistical power. We provide a R package (EasyMARK) alongside with this paper to facilitate future integration between MR methods and classical selection studies. EasyMARK provides the opportunity to convert the regression coefficients from MR-approaches in to classical standardized selection gradients.
Data from: Node-based measures of connectivity in genetic networks
At-site environmental conditions can have strong influences on genetic connectivity, and in particular on the immigration and settlement phases of dispersal. However, at-site processes are rarely explored in landscape genetic analyses. Networks can facilitate the study of at-site processes, where network nodes are used to model site-level effects. We used simulated genetic networks to compare and contrast the performance of 7 node-based (as opposed to edge-based) genetic connectivity metrics. We simulated increasing node connectivity by varying migration in two ways: we increased the number of migrants moving between a focal node and a set number of recipient nodes, and we increased the number of recipient nodes receiving a set number of migrants. We found that two metrics in particular, the average edge weight and the average inverse edge weight, varied linearly with simulated connectivity. Conversely, node degree was not a good measure of connectivity. We demonstrated the use of average inverse edge weight to describe the influence of at-site habitat characteristics on genetic connectivity of 653 American martens (Martes americana) in Ontario, Canada. We found that highly connected nodes had high habitat quality for marten (deep snow and high proportions of coniferous and mature forest) and were farther from the range edge. We recommend the use of node-based genetic connectivity metrics, in particular, average edge weight or average inverse edge weight, to model the influences of at-site habitat conditions on the immigration and settlement phases of dispersal.
Data from: Human circulating antibody-producing B cell as a predictive measure of mucosal immunity to poliovirus
Background: The "gold standard" for assessing mucosal immunity after vaccination with poliovirus vaccines consists in measuring virus excretion in stool after challenge with oral poliovirus vaccine (OPV). This testing is time and resource intensive, and development of alternative methods is a priority for accelerating polio eradication. We therefore evaluated circulating antibody-secreting cells (ASCs) as a potential means to evaluate mucosal immunity to poliovirus vaccine. Methods: 199 subjects, aged 10 years, and previously immunized repeatedly with OPV, were selected. Subjects were assigned to receive either a booster dose of inactivated poliovirus vaccine (IPV), bivalent OPV (bOPV), or no vaccine. Using a micro-modified whole blood-based ELISPOT assay designed for field setting, circulating poliovirus type-specific IgA- and IgG-ASCs, including gut homing ?4?7+ ASCs, were enumerated on days 0 and 7 after booster immunization. In addition, serum samples collected on days 0, 28 and 56 were tested for neutralizing antibody titers against poliovirus types 1, 2, and 3. Stool specimens were collected on day 28 (day of bOPV challenge), and on days 31, 35 and 42 and processed for poliovirus isolation. Results: An IPV dose elicited blood IgA- and IgG-ASC responses in 84.8 to 94.9% of subjects, respectively. In comparison, a bOPV dose evoked corresponding blood ASC responses in 20.0 to 48.6% of subjects. A significant association was found between IgA- and IgG-ASC responses and serum neutralizing antibody titers for poliovirus type 1, 2, 3 (p<0.001). In the IPV group, ?4?7+ ASCs accounted for a substantial proportion of IgA-ASCs and the proportion of subjects with a positive ?4?7+ IgA-ASC response to poliovirus types 1, 2 and 3 was 62.7%, 89.8% and 45.8%, respectively. A significant association was observed between virus excretion and ?4?7+ IgA- and/or IgG-ASC responses to poliovirus type 3 among immunized children; however, only a weak association was found for type 1 poliovirus. Discussion: Our results suggest that virus-specific blood ASCs, especially for type 3 poliovirus, can serve as surrogate of mucosal immunity after vaccination. Further studies are needed to evaluate the duration of such memory responses and to assess the programmatic utility of this whole blood-based mucosal ASC testing for the polio eradication program.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.