Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
10,554
datasets available to search
ShareScore release 0.9.0
Dataset results
10,554 results for “measure”
Data from: Evaluation of two methods for minimally invasive peripheral body temperature measurement in birds
Body temperature (Tb) is a valuable parameter when assessing the physiological state of animals, but its widespread measurement is often constrained by methods that are invasive or require frequent recapture of animals. Alternatives based on automated remote sensing of peripheral Tb show promise, but little is known about their strengths and limitations. We measured peripheral Tb in great tits Parus major with subcutaneously implanted passive integrated transponders (PIT tags) and externally attached radio transmitters to determine repeatability of measurements, sensitivity of each method to variation in ambient temperature (Ta) and wind speed, the relationship between methods, and their ability to capture circadian variation in Tb. Repeatability of measurements by radio transmitters was high (> 80%) when readings were taken within 20 min, but reduced to 16% when measures were spaced 3.5 h apart. PIT tag data for the 3.5 h interval were more repeatable (33%) and less variable (cv). Data were affected by Ta with a stronger effect on the externally attached transmitters, but the influence of wind speed was small for both methods. There was a significant positive relationship between transmitter- and PIT tag temperature during both days and nights. Both methods were equally suited to detect diel changes in peripheral Tb. However, transmitters offered longer detection distance and better temporal resolution. These qualities should be considered when deciding how to collect Tb data remotely. If properly deployed, both methods allow measurement of peripheral Tb over a wide range of natural systems and conditions in small, free-ranging, birds.
Data from: A comparison of pedigree- and genetic-based measures for identifying inbreeding depression in the critically endangered Attwater's Prairie-chicken
The primary goal of captive breeding programs for endangered species is to prevent extinction, a component of which includes the preservation of genetic diversity and avoidance of inbreeding. This is typically accomplished by minimizing mean kinship in the population, thereby maintaining equal representation of the genetic founders used to initiate the captive population. If errors in the pedigree do exist, such an approach becomes less effective for minimizing inbreeding depression. In this study both pedigree- and DNA-based methods were used to assess whether inbreeding depression existed in the captive population of the critically endangered Attwater's Prairie-chicken (Tympanuchus cupido attwateri), a subspecies of prairie grouse that has experienced a significant decline in abundance and concurrent reduction of neutral genetic diversity. When examining the captive population for signs of inbreeding, variation in pedigree-based inbreeding coefficients (f_pedigree) was less than that obtained from DNA-based methods (f_DNA). Mortality of chicks and adults in captivity were also positively correlated with parental relatedness (r_DNA) and f_DNA, respectively, while no correlation was observed with pedigree-based measures when controlling for additional variables such as age, breeding facility, gender, and captive/release status. Further, individual homozygosity by loci (HL) and parental r_DNA values were positively correlated with adult mortality in captivity and the occurrence of a lethal congenital defect in chicks, respectively, suggesting that inbreeding may be a contributing factor increasing the frequency of this condition among Attwater's Prairie-chickens. This study highlights the importance of using DNA-based methods to better inform management decisions when pedigrees are incomplete or errors may exist due to uncertainty in pairings.
Determining the underlying structure of insular isolation measures
<p><b>Aim</b> Island isolation is measured in many ways. We seek to determine what the underlying latent factors characterising these measures are, in order to understand how they mechanistically drive island biogeographic patterns and in order to recommend the most parsimonious measures. We then test the discriminatory power of the identified components against hypotheses generated from the biogeographic patterns of invasive rats. </p> <p><b>Taxon </b>mammals</p> <p><b>Location</b> The 890 offshore islands (≥ 1 hectare area) of the New Zealand archipelago (latitude: 34.1-47.3°S, longitude: 166.2-178.4°E).</p> <p><b>Methods</b> We identified 16 measures that have been frequently used to characterise isolation in the past, including Euclidean-based distance metrics, landscape connectivity metrics derived from least-cost and circuit theory modelling, landscape buffers, stepping stones, and insular area. We used principal components analysis (PCA) to synthesise the underlying structure of insular isolation with respect to terrestrial mammal dispersal. Finally, we tested the discriminatory power of retained principal components (PCs) using permutational multivariate analyses of variance (PERMANOVA). Tests include comparison of historical rat distributions, islands targeted for rat eradication, and islands reinvaded by rats.</p> <p><b>Results</b> The underlying structure of island isolation as characterised in the 16 metrics was described by three independent PCA components. Variable clustering suggests that PC1 captured distance from the mainland source to the focal island (PC1 Distance), PC2 described stepping stones available along the dispersal pathway (PC2 Stepping Stones), and PC3 described the focal island's position in the landscape (PC3 Insular Network). Each discriminatory test affirmed its respective biogeographic pattern hypothesis.</p> <p><b>Main Conclusions</b> The three underlying components we identify form the basis of a robust description of insular isolation that is of broad importance to understanding island biogeography dynamics. Moreover, these components can be applied across taxa without extensive structural or functional assumptions because the highest loading variables are not biologically informed.</p>
Data from: Conservation value of low-productive forests measured as the amount and diversity of dead wood and saproxylic beetles
In many managed landscapes, low-productive land comprises most of the remaining relatively untouched areas, and is often over-represented within protected areas. The relationship between the productivity and conservational value of a site is poorly known; however, it has been hypothesized that biodiversity increases with productivity due to higher resource abundance or heterogeneity, and that the species communities of low-productive land are a nested sub-set of communities from more productive land. We tested these hypotheses for dead wood-dependent beetles by comparing their species richness and composition, as well as the amount and diversity of dead wood, between low-productive (potential forest growth < 1 m3 ha-1 year-1) and productive Scots pine-dominated stands in Sweden. We included four stand types: stands situated on (i) thin soils and (ii) mires (both low-productive), (iii) managed stands, and (iv) unmanaged stands set aside for conservation purposes (both productive). Beetle species richness and number of red-listed species were highest in the productive set-asides. Species richness was positively correlated with the volume and diversity of dead wood, but volume appeared to be a better predictor than diversity for the higher species richness in set-asides. Beetle species composition was similar among stand types, and the assemblages in low-productive stands were largely subsets of those in productive set-asides. However, 11% of all species and 40% of red-listed species only occurred in productive stands, while no species were unique to low-productive stands. We conclude that low-productive forests are less valuable for conservation than productive forest land. Given the generally similar species composition among stand types, a comparable conservational effect could be obtained by setting aside a larger area of low-productive forest in comparison to the productive. In terms of dead wood volumes, 1.8–3.6 ha of low-productive forest has the same value as 1 ha of unmanaged productive forest. This figure can be used to estimate the conservation value of low productive forests; however, as productive forests harbored some unique species, they are not completely exchangeable.
Nitrogen isotope fractionation during archaeal ammonia oxidation: coupled estimates from measurements of residual ammonium and accumulated nitrite
<p>The naturally occurring nitrogen (N) isotopes, <sup>15</sup>N and <sup>14</sup>N, exhibit different reaction rates during many microbial N transformation processes, which results in N isotope fractionation. Such isotope effects are critical parameters for interpreting natural stable isotope abundances as proxies for biological process rates in the environment across scales. The kinetic isotope effect of ammonia oxidation (AO) to nitrite (NO<sub>2</sub><sup>-</sup>), performed by ammonia-oxidizing archaea (AOA) and bacteria (AOB), is generally ascribed to the enzyme ammonia monooxygenase (AMO), which catalyzes the first step in this process. However, the kinetic isotope effect of AMO, or ε<sub><i>AMO</i></sub><span><span> </span></span>, has been typically determined based on isotope kinetics during product formation (cumulative product, NO<sub>2</sub><sup>-</sup>) alone, which may have overestimated ε<sub><i>AMO</i></sub><span><span> </span></span> due to possible accumulation of chemical intermediates and alternative sinks of ammonia/ammonium (NH<sub>3</sub>/NH<sub>4</sub><sup>+</sup>). Here, we analyzed <sup>15</sup>N isotope fractionation during archaeal ammonia oxidation based on both isotopic changes in residual substrate (RS, <span>NH<sub>4</sub><sup>+</sup></span>) and cumulative product (CP, NO<sub>2</sub><sup>-</sup>) pools in pure cultures of the soil strain <i>Nitrososphaera viennensis</i> EN76, and in highly enriched cultures of the marine strain <i>Nitrosopumilus adriaticus</i> NF5, under non-limiting substrate conditions. We obtained ε<sub><i>AMO</i></sub><span><span> </span></span> values of 31.9-33.1‰ for both strains based on RS (<span>δ<sup>15</sup>NH<sub>4</sub><sup>+</sup>), and show that </span>estimates based on CP (δ<sup>15</sup>NO<sub>2</sub><sup>-</sup>) give larger isotope fractionation factors by 6-8‰. Complementary analyses showed that, at the end of the growth period, microbial biomass was <sup>15</sup>N-enriched<span> (10.1</span>‰),<span> whereas </span>nitrous oxide (N<sub>2</sub>O) was highly <sup>15</sup>N depleted (-38.1‰) relative to the initial substrate. Although we did not determine the isotope effect of <span>NH<sub>4</sub><sup>+</sup> </span>assimilation (biomass formation) and N<sub>2</sub>O production by AOA, our results nevertheless show that the discrepancy between ε<sub><i>AMO</i></sub><span><span> </span></span> estimates based on RS and CP might have derived from incorporation of <sup>15</sup>N-enriched residual NH<sub>4</sub><sup>+</sup> after AMO reaction into microbial biomass, and that N<sub>2</sub>O production did not affect isotope fractionation estimates significantly.</p>
Data from: Field measurements give biased estimates of functional response parameters, but help explain foraging distributions
1. Mechanistic insights and predictive understanding of the spatial distributions of foragers are typically derived by fitting either field measurements on intake rates and food abundance, or observations from controlled experiments, to functional response models. It has remained unclear, however, whether and why one approach should be favoured above the other, as direct comparative studies are rare. 2. The field measurements required to parameterize either single or multi-species functional response models are relatively easy to obtain, except at sites with low food densities and at places with high food densities, as the former will be avoided and the second will be rare. Also, in foragers facing a digestive bottleneck, intake rates (calculated over total time) will be constant over a wide range of food densities. In addition, interference effects may further depress intake rates. All of this hinders the appropriate estimation of parameters such as the 'instantaneous area of discovery' and the handling time, using a type II functional response model also known as 'Holling's disc equation'. 3. Here we compare field- and controlled experimental measurements of intake rate as a function of food abundance in female bar-tailed godwits Limosa lapponica feeding on lugworms Arenicola marina. 4. We show that a fit of the type II functional response model to field measurements predicts lower intake rates (about 2.5 times), longer handling times (about 4 times) and lower 'instantaneous areas of discovery' (about 30 to 70 times), compared with measurements from controlled experimental conditions. 5. In agreement with the assumptions of Holling's disc equation, under controlled experimental settings both the instantaneous area of discovery and handling time remained constant with an increase in food density. The field data, however, would lead us to conclude that although handling time remains constant, the instantaneous area of discovery decreased with increasing prey densities. This will result into highly underestimated sensory capacities when using field data. 6. Our results demonstrate that the elucidation of the fundamental mechanisms behind prey detection and prey processing capacities of a species necessitates measurements of functional response functions under the whole range of prey densities on solitary feeding individuals, which is only possible under controlled conditions. Field measurements yield 'consistency tests' of the distributional patterns in a specific ecological context.
Data from: Field measurements of genotype by environment interaction for fitness caused by spontaneous mutations in Arabidopsis thaliana
As the ultimate source of genetic diversity, spontaneous mutation is critical to the evolutionary process. The fitness effects of spontaneous mutations are almost always studied under controlled laboratory conditions rather than under the evolutionarily relevant conditions of the field. Of particular interest is the conditionality of new mutations - i.e., is a new mutation harmful regardless of the environment in which it is found? In other words, what is the extent of genotype-environment interaction for spontaneous mutations? We studied the fitness effects of 25 generations of accumulated spontaneous mutations in Arabidopsis thaliana in two geographically widely separated field environments, in Michigan and Virginia. At both sites, mean total fitness of MA lines exceeded that of the ancestors, contrary to the expected decrease in the mean due to new mutations but in accord with prior work on these MA lines. We observed genotype-environment interactions in the fitness effects of new mutations, such that the effects of mutations in Michigan were a poor predictor of their effects in Virginia and vice versa. In particular, mutational variance for fitness was much larger in Virginia compared to Michigan. This strong genotype-environment interaction would increase the amount of genetic variation maintained by mutation-selection balance.
Data from: Scaling up effects of measures mitigating pollinator loss from local- to landscape-level population responses
1. Declining pollinator populations have caused concern about consequences for food production, and have initiated an increasing number of initiatives that aim to mitigate pollinator loss through enhancement of floral resources. Studies evaluating effects of mitigation measures generally demonstrate positive responses of pollinators to floral resource enhancement. However, it remains unclear whether this represents landscape-level population effects or results from a spatial redistribution of individuals from otherwise unaffected populations. 2. Here we present a method for estimating landscape-level population effects using data from commonly used standardized pollinator transect surveys. The approach links local density responses of pollinators in both mitigation sites and surrounding landscape elements to the area these habitats occupy in mitigation landscapes as well as control landscapes to obtain landscape-level population estimates. 3. We demonstrate the method using data from a two-year study examining the effects of experimental wildflower enhancements on wild bumble bees and solitary bees in Dutch agricultural landscapes. The results show that conclusions based on local responses may differ significantly from those based on landscape-level responses. 4. Wildflower enhancements significantly enhanced landscape-level abundance of both bumble bees and solitary bees. Bumble bees showed a pronounced positive local density response in mitigation sites and the surrounding landscape that was in line with significant landscape-level increases in abundance. However, solitary bees showed no local response to mitigation sites, and the landscape-level increases in abundance only became apparent when the area of bee habitat was taken into account. 5. Incorporating the area of both newly created and pre-existing pollinator habitats into effect estimates accounts for density-dependent processes such as dilution, spill-over and local concentration of individuals. It therefore results in more reliable estimates of the response to mitigation measures of pollinators, as well as other mobile arthropod groups that are often being surveyed using transect surveys.
Data from: Inaccuracy of venous point-of-care glucose measurements in critically ill patients: a cross-sectional study
Introduction: Current guidelines and consensus recommend arterial and venous samples as equally acceptable for blood glucose assessment in point-of-care devices, but there is limited evidence to support this recommendation. We evaluated the accuracy of two devices for bedside point-of-care blood glucose measurements using arterial, fingerstick and catheter venous blood samples in ICU patients, and assessed which factors could impair their accuracy. Methods: 145 patients from a 41-bed adult mixed-ICU, in a tertiary care hospital were prospectively enrolled. Fingerstick, central venous (catheter) and arterial blood (indwelling catheter) samples were simultaneously collected, once per patient. Arterial measurements obtained with Precision PCx, and arterial, fingerstick and venous measurements obtained with Accu-chek Advantage II were compared to arterial central lab measurements. Agreement between point-of-care and laboratory measurements were evaluated with Bland-Altman, and multiple linear regression models were used to investigate interference of associated factors. Results: Mean difference between Accu-chek arterial samples versus central lab was 10.7 mg/dL (95% LA -21.3 to 42.7 mg/dL), and between Precision PCx versus central lab was 18.6 mg/dL (95% LA -12.6 to 49.5 mg/dL). Accu-chek fingerstick versus central lab arterial samples presented a similar bias (10.0 mg/dL) but a wider 95% LA (-31.8 to 51.8 mg/dL). Agreement between venous samples with arterial central lab was the poorest (mean bias 15.1 mg/dL; 95% LA -51.7 to 81.9). Hyperglycemia, low hematocrit, and acidosis were associated with larger differences between arterial and venous blood measurements with the two glucometers and central lab. Vasopressor administration was associated with increased error for fingerstick measurements. Conclusions: Sampling from central venous catheters should not be used for glycemic control in ICU patients. In addition, reliability of the two evaluated glucometers was insufficient. Error with Accu-chek Advantage II increases mostly with central venous samples. Hyperglycemia, lower hematocrit, acidosis, and vasopressor administration increase measurement error.
Data from: In situ measurements of animal morphological features; a non-invasive method
1) Measurements of morphological features are important for ecological studies, especially on free-ranging wild animal species. Conventionally, specimens either dead or in captivity are used for morphometric studies, which is difficult in the case of wild species for several reasons. Capturing would be even futile when research questions are relating to issues such as prey size selection or estimation of intake rate in under field conditions, where in situ morphometric measurements are inevitable. Remotely estimating morphometric features via, avian bill and head length are always laden with wide variances. Hence, we developed this technique for in situ measurements of animal morphology through digital photographs. 2) This non-invasive novel method for in situ estimation of individuals' morphometric measurements uses digital photographs' metadata. We extracted the metadata (field of view, focal length, subject-distance etc.,) in Exchangeable Image File Format (EXIF) from digital images using freely available software, and the unknown sizes were estimated from each image. Cardboard (fish) models were, at first, used to estimate the accuracy of measurements comparing actual and estimated values, and the same protocol was repeated on museum specimens (bird). Finally, we checked the repeatability of this method under field conditions using free ranging Chickens (Gallus gallus domesticus). The results under different conditions were subjected to rigorous statistical testing. 3) Upon comparing the actual with estimated values, obtained from three distinct types of objects (1. Cardboard model, 2. Museum specimens, and 3. Live birds under field conditions), variations were found non-significant affirming the assumption that actual value (Y) = estimated value (X) with inconsequential variance of the Y from X. Moreover, both the relative and absolute errors between the actual and estimated values were so low, indicating that this method yielded neither over-estimation nor under-estimation. 4) The advantage of this non-invasive method is that it could generate reasonably accurate morphometric measurements at a relatively low cost for routine morphometric works in field conditions. We envisage significant utility of this non-invasive technique in different fields of science such as biology, morphology, ecology, evolution, wildlife, conservation science, agriculture, forensics and engineering design.
Data from: Measuring microbial fitness in a field reciprocal transplant experiment
Microbial fitness is easy to measure in the laboratory, but difficult to measure in the field. Laboratory fitness assays make use of controlled conditions and genetically modified organisms, neither of which are available in the field. Among other applications, fitness assays can help researchers detect adaptation to different habitats or locations. We designed a competitive fitness assay to detect adaptation of Saccharomyces paradoxus isolates to the habitat they were isolated from (oak or larch leaf litter). The assay accurately measures relative fitness by tracking genotype frequency changes in the field using digital droplet PCR (DDPCR). We expected locally adapted S. paradoxus strains to increase in frequency over time when growing on the leaf litter type from which they were isolated. The DDPCR assay successfully detected fitness differences among S. paradoxus strains, but did not find a tendency for strains to be adapted to the habitat they were isolated from. Instead, we found that the natural alleles of the hexose transport gene we used to distinguish S. paradoxus strains had significant effects on fitness. The origin of a strain also affected its fitness: strains isolated from oak litter were generally fitter than strains from larch litter. Our results suggest that dispersal limitation and genetic drift shape S. paradoxus populations in the forest more than local selection does, although further research is needed to confirm this. Tracking genotype frequency changes using DDPCR is a practical and accurate microbial fitness assay for natural environments.
Data from: An in situ approach for measuring biogeochemical fluxes in structurally complex benthic communities
1. The exchange of energy and nutrients are integral components of ecological functions of benthic shallow-water ecosystems and are directly dependent on in situ environmental conditions. Traditional laboratory experiments cannot account for the multidimensionality of interacting processes when assessing metabolic rates and biogeochemical fluxes of structurally complex benthic communities. Current in situ chamber systems are expensive, limited in their functionality, and the deployment is often restricted to planar habitats (e.g., sediments or seagrass meadows) only. 2. To overcome these constraints, we describe a protocol to build and use non-invasive, cost-effective, and easy to handle in situ incubation chambers that provide reproducible measurements of biogeochemical processes in simple and structurally complex benthic shallow-water communities. Photogrammetry tools account for the structural complexity of benthic communities, enabling to calculate accurate community fluxes. We tested the performance of the system in laboratory assays and various benthic habitats (i.e., algae growing on rock, coral assemblages, sediments, and seagrass meadows). In addition, we estimated community budgets of photosynthesis and respiration by corals, rock with algae, and carbonate sediments, which were subsequently compared to budgets extrapolated from conventional ex situ single-organism incubations. 3. The tests highlight the transparency (> 90% light transmission) of the chambers and minimal water exchange with the surrounding medium on most substrates. Linear dissolved oxygen fluxes in dependence to incubation time showed sufficient mixing of the water by circulation pumps and no organismal stress response. The comparison to single-organism incubations showed that ex situ measurements might overestimate community-wide net primary production and underestimate respiration and gross photosynthesis by 20 – 90%. 4. The proposed protocol overcomes the paucity of observational and manipulative studies that can be performed in in situ native habitats, thus producing widely-applicable and realistic assessments on the community level. Importantly, the tool provides a standardized approach to compare community functions across a wide range of benthic habitats. We identify multiple experimental strategies, including the manipulation of stressors/factors, and discuss how the method may be implemented in a variety of aquatic studies.
Data from: Composite measures of selection can improve the signal-to-noise ratio in genome scans
The growing wealth of genomic data is yielding new insights into the genetic basis of adaptation, but it also presents the challenge of extracting the relevant signal from multi-dimensional datasets. Different statistical approaches vary in their power to detect selection depending on the demographic history, type of selection, genetic architecture and experimental design. Here, we develop and evaluate new approaches for combining results from multiple tests, including multivariate distance measures and methods for combining P-values. We evaluate these methods on (i) simulated landscape genetic data analysed for differentiation outliers and genetic-environment associations and (ii) empirical genomic data analysed for selective sweeps within dog breeds for loci known to be selected for during domestication. We also introduce and evaluate how robust statistical algorithms can be used for parameter estimation in statistical genomics. On the simulated data, many of the composite measures performed well and had decreased variation in outcomes across many sampling designs. On the empirical dataset, methods based on combining P-values generally performed better with clearer signals of selection, higher significance of the signal, and in closer proximity to the known selected locus. Although robust algorithms could identify neutral loci in our simulations, they did not universally improve power to detect selection. Overall, a composite statistic that measured a robust multivariate distance from rank-based P-values performed the best. We found that composite measures of selection could improve the signal of selection in many cases, but they were not a panacea and their power is limited by the power of the univariate statistics they summarize. Since genome scans are widely used, improving inference for prioritizing candidate genes may be beneficial to medicine, agriculture, and breeding. Our results also have application to outlier detection in high-dimensional datasets and to combining results in meta-analyses in many disciplines. The compound measures we evaluate are implemented in the r package minotaur.
Data from: Phylogenetic measures of biodiversity and neo- and paleo-endemism
Understanding spatial patterns of biodiversity is critical for conservation planning, particularly given rapid habitat loss and human-induced climatic change. Diversity and endemism are typically assessed by comparing species ranges across regions. However, investigation of patterns of species diversity alone misses out on the full richness of patterns that can be inferred using a phylogenetic approach. Here, using Australian Acacia as an example, we show that the application of phylogenetic methods, particularly two new measures, relative phylogenetic diversity and relative phylogenetic endemism, greatly enhances our knowledge of biodiversity across both space and time. We found that areas of high species richness and species endemism are not necessarily areas of high phylogenetic diversity or phylogenetic endemism. We propose a new method called categorical analysis of neo- and paleo-endemism (CANAPE) that allows, for the first time, a clear, quantitative distinction between centres of neo- and paleo-endemism, useful to the conservation decision-making process.
Data from: Accelerometers can measure total and activity-specific energy expenditure in free-ranging marine mammals only if linked to time-activity budgets
Energy expenditure is an important component of foraging ecology, but is extremely difficult to estimate in free-ranging animals and depends on how animals partition their time between different activities during foraging. Acceleration data have emerged as a new way to determine energy expenditure at a fine scale but this needs to be tested and validated in wild animals. This study investigated whether vectorial dynamic body acceleration (VeDBA) could accurately predict the energy expended by marine predators during a full foraging trip. We also aimed to determine whether the accuracy of predictions of energy expenditure derived from acceleration increased when partitioned by different types of at-sea activities (i.e. diving, transiting, resting and surface activities). To do so, we equipped 20 lactating northern (Callorhinus ursinus) and 20 lactating Antarctic fur seals (Arctocephalus gazella) with GPS, time-depth recorders and tri-axial accelerometers and obtained estimates of field metabolic rates using the doubly labelled water (DLW) method. VeDBA was derived from tri-axial acceleration, and at-sea activities (diving, transiting, resting and surface activities) were determined using dive depth, tri-axial acceleration and travelling speed. We found that VeDBA did not accurately predict the total energy expended by fur seals during their full foraging trips (R2 = 0·36). However, the accuracy of VeDBA as a predictor of total energy expenditure increased significantly when foraging trips were partitioned by activity and when activity-specific VeDBA was paired with time-activity budgets (R2 = 0·70). Activity-specific VeDBA also accurately predicted the energy expenditures of each activity independent of each other (R2 > 0·85). Our study confirms that acceleration is a promising way to estimate energy expenditures of free-ranging marine mammals at a fine scale never attained before. However, it shows that it needs to be based on the time-activity budgets that make up foraging trips rather than being derived as a single measure of VeDBA applied to entire foraging trips. Our activity-based method provides a cost-effective means to accurately calculate energy expenditures of fur seals using acceleration and time-activity budgets, that can be transfered to studies on other species.
Data from: Long-term environmental monitoring for assessment of change: measurement inconsistencies over time and potential solutions
The importance of long-term environmental monitoring and research for detecting and understanding changes in ecosystems and human impacts on natural systems is widely acknowledged. Over the last decades a number of critical components for successful long-term monitoring have been identified. One basic component is quality assurance/quality control protocols to ensure consistency and comparability of data. In Norway, the authorities require environmental monitoring of the impacts of the offshore petroleum industry on the Norwegian continental shelf, and in 1996 a large-scale regional environmental monitoring program was established. As a case study, we used a sub-set of data from this monitoring to explore concepts regarding best practices for long-term environmental monitoring. Specifically, we examined data from physical and chemical sediment samples and benthic macro-invertebrate assemblages from 11 stations from six sampling occasions during the period 1996-2011. Despite the established quality assessment and quality control protocols for this monitoring program, we identified several data challenges, such as, missing values and outliers, discrepancies in variable and station names, changes in procedures without calibration, and different taxonomic resolution. Furthermore, we show that the use of different laboratories over time makes it difficult to draw conclusions with regard to some of the observed changes. We offer recommendations to facilitate comparison of data over time. We also present a new procedure to handle different taxonomic resolution so valuable historical data is not discarded. These topics have a broader relevance and application than for our case study.
Data from: A critical analysis of the potential for EU Common Agricultural Policy measures to support wild pollinators on farmland
<p>1. Agricultural intensification and associated loss of high-quality habitats are key drivers of insect pollinator declines. With the aim of decreasing the environmental impact of agriculture, the 2014 EU Common Agricultural Policy (CAP) defined a set of habitat and landscape features (Ecological Focus Areas: EFAs) farmers could select from as a requirement to receive basic farm payments. To inform the post-2020 CAP, we performed a European-scale evaluation to determine how different EFA options vary in their potential to support insect pollinators under standard and pollinator-friendly management, as well as the extent of farmer uptake.</p> <p> 2. A structured Delphi elicitation process engaged 22 experts from 18 European countries to evaluate EFAs options. By considering life cycle requirements of key pollinating <i>taxa</i> (i.e. bumble bees, solitary bees and hoverflies), each option was evaluated for its potential to provide forage, bee nesting sites and hoverfly larval resources.</p> <p>3. EFA options varied substantially in the resources they were perceived to provide and their effectiveness varied geographically and temporally. For example, field margins provide relatively good forage throughout the season in Southern and Eastern Europe but lacked early-season forage in Northern and Western Europe. Under standard management, no single EFA option achieved high scores across resource categories and a scarcity of late season forage was perceived.</p> <p>4. Experts identified substantial opportunities to improve habitat quality by adopting pollinator-friendly management. Improving management alone was, however, unlikely to ensure that all pollinator resource requirements were met. Our analyses suggest that a combination of poor management, differences in the inherent pollinator habitat quality and uptake bias towards catch crops and nitrogen-fixing crops severely limit the potential of EFAs to support pollinators in European agricultural landscapes.</p> <p>5. <i>Policy Implications.</i> To conserve pollinators and help protect pollination services, our study highlights the need to create a variety of interconnected, well-managed habitats that complement each other in the resources they offer<i>. </i>To achieve this the CAP post-2020 should take a holistic view to implementation that integrates the different delivery vehicles aimed at protecting biodiversity (e.g. enhanced conditionality, eco-schemes and Agri-Environment and Climate Measures). To improve habitat quality we recommend an effective monitoring framework with target-orientated indicators and to facilitate the spatial targeting of options collaboration between land managers should be incentivised.</p>
Data from: Primary care follow-up and measured mental health outcomes among women referred for ultrasound assessment of pain and/or bleeding in early pregnancy: a quantitative questionnaire study
Objectives To examine the extent of primary care follow-up and mental health outcomes among women referred for ultrasound assessment of pain and/or bleeding in early pregnancy, including those whose pregnancy is found to be viable on ultrasound assessment. Design Questionnaire study with prospective follow-up. Setting Urgent gynaecology clinic in secondary care, England. Participants 57 women participated in the study. Entry criteria: referral to the urgent gynaecology clinic with pain and/or bleeding in early pregnancy; gestation less than 16 weeks (the clinic's own 'cut-off'); no previous attendance at the clinic during the current pregnancy. Exclusion criteria: inability to understand English or to provide informed consent. Primary and secondary outcome measures Incidence of primary care follow-up among women referred to the urgent gynaecology clinic; incidence of women with measured mental health scores suggesting significant symptoms of distress. Results Fewer than 1 in 10 women referred for ultrasound assessment of pain and/or bleeding in early pregnancy had follow-up arrangements made with their general practitioner (GP). Most women who had GP follow-up found it helpful and a significant minority of women who did not have GP follow-up felt that it would have been helpful. Following ultrasound assessment, more than one-third of women had significant symptoms of distress. Symptoms of distress, particularly anxiety, were present among those women found to have viable pregnancies, as well as among those with non-viable pregnancies. Conclusions GPs are advised to consider offering follow-up to all women referred for ultrasound assessment of pain and/or bleeding in early pregnancy. Researchers in this area are advised to consider the experiences of women with pain and/or bleeding in early pregnancy whose pregnancies are ultimately found to be viable on ultrasound scan.
Data from: When field experiments yield unexpected results: lessons learned from measuring selection in White Sands lizards
Determining the adaptive significance of phenotypic traits is key for understanding evolution and diversification in natural populations. However, evolutionary biologists have an incomplete understanding of how specific traits affect fitness in most populations. The White Sands system provides an opportunity to study the adaptive significance of traits in an experimental context. Blanched color evolved recently in three species of lizards inhabiting the gypsum dunes of White Sands and is likely an adaptation to avoid predation. To determine whether there is a relationship between color and susceptibility to predation in White Sands lizards, we conducted enclosure experiments, quantifying survivorship of Holbrookia maculate exhibiting substrate-matched and substrate-mismatched phenotypes. Lizards in our study experienced strong predation. Color did not have a significant effect on survival, but we found several unexpected relationships including variation in predation over small spatial and temporal scales. In addition, we detected a marginally significant interaction between sex and color, suggesting selection for substrate matching may be stronger for males than females. We use our results as a case study to examine six major challenges frequently encountered in field-based studies of natural selection, and suggest that insight into the complexities of selection often results when experiments turn out differently than expected.
Data from: Measures of effective population size in sea otters reveal special considerations for wide-ranging species
Conservation genetic techniques and considerations of the evolutionary potential of a species are increasingly being applied to species conservation. For example, effective population size (Ne) estimates are useful for determining the conservation status of species, yet accurate estimates of current Ne remain difficult to obtain. The effective population size can contribute to setting federal delisting criteria, as was done for the southern sea otter (Enhydra lutris nereis). After being hunted to near extinction during the North Pacific fur trade, the southern sea otter has recovered over part of its former range, but remains at relatively low numbers, making it desirable to obtain accurate and consistent estimates of Ne. Although theoretical papers have compared the validity of several methods, comparisons of estimators using empirical data in applied conservation settings are limited. We combined thirteen years of demographic and genetic data from 1,006 sea otters to assess multiple Ne estimators, as well as temporal trends in genetic diversity and population genetic structure. Genetic diversity was low and did not increase over time. There was no evidence for distinct genetic units, but some evidence for genetic isolation by distance. Notably, estimates of Ne based on demographic data were much larger than genetic estimates when computed for the entire range of the population, but were similar at smaller spatial scales. The discrepancy between estimates at large spatial scales could be driven by cryptic population structure and/or individual differences in reproductive success. We recommend the development of new delisting criteria for the southern sea otter. We advise the use of multiple estimates of Ne for other wide-ranging species, species with overlapping generations, or with sex biased dispersal, as well as the development of improved metrics of genetic assessments of populations.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.