Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
10,554
datasets available to search
ShareScore release 0.9.0
Dataset results
10,554 results for “measure”
Dataset and codes: Abundance of trace fossil Phycosiphon incertum in core sections measured using a convolutional neural network
Open the record for dataset details and reuse information.
Dataset for "Low blank sampling method for measurement of the nitrogen isotopic composition of atmospheric nitrogen oxide "
<p>The final dataset used in the manuscript "Low blank sampling method for measurement of the nitrogen isotopic composition of atmospheric nitrogen oxide<sub> </sub>" by Kamezaki et al. The dataset contains NOx concentration and nitrogen isotopic composition observed at Yoyogi and Tsukuba sites in Japan. Additionally, the data used in the paper are also included. Raw data are available upon request from the author.</p>
TIMING AND PATIENTS' POSITION DURING CUFF BLOOD PRESSURE MEASUREMENT AFFECT MYOCARDIAL WORK PARAMETERS MEASURED BY ECHOCARDIOGRAPHY
<p><span>BACKGROUND. Although cuff blood pressure measurement is a critical parameter to calculate myocardial work (MW) noninvasively, there is no recommendation about when and how to measure it. Accordingly, we sought to evaluate the effects of the timing during the echo study and the patient's position on the scanning bed during the cuff blood pressure measurement on MW parameter calculations.</span></p> <p><span>METHODS. 101 consecutive patients (44 women, 66±14 years) undergoing clinically indicated echocardiography were prospectively enrolled. During the echocardiographic study, we measured the cuff blood pressure four times, using a fully automatic digital blood pressure monitor applied to the right arm and left in the same position throughout the stud: BP1 before the start of the echo study, with the patient lying in the supine position; BP2, after positioning the patients on his/her left side to start the echo study; BP3, at the time of the acquisition of the three apical views (4-, 2-chamber, and the long-axis) used to measured left ventricular global longitudinal strain (GLS); and BP4, at the end of the echo study with the patient again in the supine position.</span></p> <p><span>RESULTS. Systolic blood pressure (SBP) at BP1 was 147±21 mm Hg. Between BP1 and BP2, it dropped by 17±9 mm Hg (p<0.05). SBP at BP3 was significantly lower than BP2 (130±20 mm Hg vs. 122±18 mm Hg, p<0.05), and at BP4 was significantly lower than at BP1 (-9±13 mm Hg, p<0.05). The average GLS was -16±3%. Accordingly, the global work index was 1929±441 mmHg% at BP1, dropped to 1717±421 at BP2, decreased to 1602±351 mm Hg% at BP3, and increased to 1815±386 mmHg% at BP4 (p<0.001).</span></p> <p><span>CONCLUSIONS. The timing during the echocardiography study and the patient's position on the scanning bed are critical determinants of the measured cuff SPB and the resulting values of MW parameters. </span></p>
The modeling of cosmogenic Cr isotopes produced in lunar rocks compared with existing calculations and measurements
<p>The data in the work 'The modeling of cosmogenic Cr isotopes produced in lunar rocks compared with existing calculations and measurements'</p>
Datasets to: Measurement report: Introduction to the HyICE-2018 campaign for the measurements of ice nucleating particles in the boreal forest of Hyytiälä
<p>This repository contains the datasets used in the study 'Measurement report: Introduction to the HyICE-2018 campaign for the measurements of ice nucleating particles in the boreal forest of Hyytiälä'. Detailed information and technical aspects of the data can be found in the publication.</p> <p>Update (version 2 - January 2024): The repository was updated and now contains the complete HyICE-2018 datasets for the instruments uL-NIPI and PINE. </p> <p> </p>
Supporting Data and Code for "Topological Order from Measurements and Feed-Forward on a Trapped Ion Quantum Computer"
<p>Supporting Data and Code for the paper "Topological Order from Measurements and Feed-Forward on a Trapped Ion Quantum Computer". </p> <p>Navigate to wen16/ then pip install -r requirements.txt<br>To generate all the plots/data run plots_and_data.ipynb</p>
Targeted micro-fiber arrays for measuring and manipulating localized multi-scale neural dynamics over large, deep brain volumes during behavior: resources and main figure data
<p><strong>Summary:</strong></p> <p>Neural population dynamics relevant for behavior vary over multiple spatial and temporal scales across 3-dimensional volumes. Current optical approaches lack the spatial coverage and resolution necessary to measure and manipulate naturally occurring patterns of large-scale, distributed dynamics within and across deep brain regions such as the striatum. We designed a new micro-fiber array approach capable of chronically measuring and optogenetically manipulating local dynamics across over 100 targeted locations simultaneously in head-fixed and freely moving mice. We developed a semi-automated micro-CT based strategy to precisely localize positions of each optical fiber. This highly-customizable approach enables investigation of multi-scale spatial and temporal patterns of cell-type and neurotransmitter specific signals over arbitrary 3-D volumes at a spatial resolution and coverage previously inaccessible. We applied this method to resolve rapid dopamine release dynamics across the striatum volume which revealed distinct, modality specific spatiotemporal patterns in response to salient sensory stimuli extending over millimeters of tissue. Targeted optogenetics through our fiber arrays enabled flexible control of neural signaling on multiple spatial scales, better matching endogenous signaling patterns, and spatial localization of behavioral function across large circuits. </p> <p><strong>Files included: </strong></p> <ul> <li>Vu, M-A. et al. (2023) - Key Resources Table.xlsx -- key resources used in this study</li> <li>README_figure_data_and_analysis.txt --a description of the organization of the files within this repository</li> <li>README_preprocessing_code.txt -- details about the preprocessing pipeline (including registration and localization pipelines) and annotation of the preprocessed data structure</li> <li>preprocessing_code.zip -- contains all the preprocessing code</li> <li>Fig01.zip -- preprocessed data and analysis code for main Figure 1</li> <li>Fig03.zip -- preprocessed data and analysis code for main Figure 3</li> <li>Fig04.zip -- preprocessed data and analysis code for main Figure 4</li> <li>Fig05.zip -- preprocessed data and analysis code for main Figure 5</li> <li>Fig06.zip -- preprocessed data and analysis code for main Figure 6</li> <li>Fig07.zip -- preprocessed data and analysis code for main Figure 7</li> <li>SuppFig01.zip -- preprocessed data and analysis code for supplemental Figure 1</li> <li>SuppFig02.zip -- preprocessed data and analysis code for supplemental Figure 2</li> <li>SuppFig03.zip -- preprocessed data and analysis code for supplemental Figure 3</li> <li>SuppFig04.zip -- preprocessed data and analysis code for supplemental Figure 4</li> <li>SuppFig05.zip -- preprocessed data and analysis code for supplemental Figure 5</li> <li>SuppFig06.zip -- preprocessed data and analysis code for supplemental Figure 6</li> <li>SuppFig07.zip -- preprocessed data and analysis code for supplemental Figure 7</li> </ul> <p>Each .zip file contains a folder corresponding to a figure. Within each figure folder will be a folder corresponding to the letter (e.g., A, B, C) of the panel within the figure. In addition to the panel folders, when applicable, there may also be a folder containing general-use functions or scripts, or interim results .mat files, that are called by the scripts within the subfolders. In each subfolder there will be 3 things:</p> <ol> <li>a folder of preprocessed data (see README_preprocessing_code.txt)</li> <li>a folder of the analysis scripts that analyzed the preprocessed data and generated the figure</li> <li>a README text file detailing the contents of both folders and the analysis workflow.</li> </ol> <p> </p>
A coarse pixel scale ground "truth" dataset based on the global in situ site measurements from 2000 to 2021.
<p><em>In situ </em>measurements from sparsely distributed networks worldwide are a valuable source of data for validating satellite products. However, the significant differences in spatial scale between in situ and satellite measurements pose a challenge for validation. To address this challenge, we propose a new global coarse pixel-scale ground "truth" dataset which provides sequential pixel scale albedo on a 500 m resolution over the period 2000-2021. The creation of data set is done using ground measurements from 416 sparsely distributed networks worldwide and high-resolution long-term time series data corresponding to site-based data. Furthermore, we thoroughly assessed the effectiveness of the dataset at sites with different degrees of spatial representativeness. The results demonstrate that using this dataset in validation outperforms the direct comparison between satellite and <em>in situ</em> site measurements over heterogeneous surfaces when <em>in situ</em> measurement footprints are less than satellite pixel size. The dataset offers a unique collection of coarse pixel scale relative ground "truth" with the widest spatial distribution and longest time series. By merging temporal information from ground-based observations and spatial information from high-resolution data, the dataset we provided represents a valuable resource for validating and correcting worldwide surface albedo products over heterogeneous surfaces.</p>
Weak evidence base for bee protective pesticide mitigation measures: Data Behind Systematic Review- Raw, Extracted and Tabulated
<p>An excel file with the raw exported data from Web of Science, the data extracted from it, and the summary statistics. </p> <p>Data associated with https://doi.org/10.1093/jee/toad118</p> <p>Edward A Straw, Dara A Stanley, Weak evidence base for bee protective pesticide mitigation measures, <em>Journal of Economic Entomology</em>, Volume 116, Issue 5, October 2023, Pages 1604–1612, <a href="https://doi.org/10.1093/jee/toad118">https://doi.org/10.1093/jee/toad118</a></p> <p> </p> <p>Straw and Stanley, 2023. </p> <p> </p> <p> </p>
Weight and length measurements for 37 Mekong River fish species of the 'Dai' fishery
<p>The Lower Mekong Basin supports some of the world's largest and most diverse inland fisheries by supplying nutrition to over 60 million people and an estimated 11 billion USD of economic activity each year. Despite the nutritional and economic importance of the fishery, there are limited data available on which fishery officers and managers can build fishery stock management plans. Traditional fishery stock management relies on models of individual and population growth that in turn rely on robust individual-based data sets, preferably collected over long time scales. One such fishery for which there are robust data sets are for the "dai," or bagnet, fishery located on the Tonle Sap River that connects the Mekong River mainstream with the Tonle Sap Lake. However, datasets from the dai fishery are not publicly available, limiting their utility for understanding how catches in this fishery have changed over time. Several papers have utilized the data from the dai fishery, but none have made the data publicly available. By partnering with commercial fishers who participate in the dai fishery and in partnership with the Cambodian Department of Fisheries and the Inland Fisheries Research and Development Institute we collected weight and length data bi-monthly for fish captured at two dai operations starting in November 2020 and continuing to February 2021, totaling 32,274 measurements of length and weight for 37 species. Here we report weight and length data for individuals captured during this timeframe as well as calculated weight-length relationships for total length and standard length for all 37 species for which there were ³30 measurements. Plots of all weight-length regressions are also included in the data package. Finally, we report equations for converting standard length measurements to total length estimates and vice versa.</p>
Real-world vehicular source indicators for exhaust and non-exhaust contribution to PM2.5 during peak and off-peak hours using tunnel measurement
<p>The data are the species concentrations, traffic and meteorological information during the sampling periods in WJL tunnel, and the estimated function of E<sub>N</sub> curve under vehicle electrification.</p>
Extant coccolithophore cell size measurements
<p><span>This is a dataset of extant coccolithophore coccosphere and cell size measurements taken using light microscopy (LM) and measured using the image analysis progam Fiji. Samples come from the Atlantic Meridional Transect (AMT) 18 cruise (2008), cruise D366 around the NW European shelf (2011), and surface water samples taken in the Maldives during International Ocean Discovery Program (IODP) Expedition 359 (2015). Further information on the data collection and content of the dataset can be found in the dataset description word file.<br><br></span></p> <p><span>This dataset is currently related to two manuscripts in preparation: </span></p> <p><span><span>1.<span> </span></span></span><span>Rosie M. Sheward, Alex J. Poulton, Jeremy R. Young, Joost de Vries, Fanny M. Monteiro, Jens O. Herrle. “Cellular morphological trait dataset for extant coccolithophores from the Atlantic Ocean” to be submitted to <em>Scientific Data</em>.</span></p> <p><span><span>2.<span> </span></span></span><span>Joost de Vries, Rosie M. Sheward, Alex J. Poulton, Jeremy Young, Fanny Monteiro, Roberta Johnson, Kyoko Hagino, Patricia Zivera and Levi Wolf. “Dataset of extant coccolithophore size, carbon content and global distribution” to be submitted to <em>Scientific Data</em>.</span></p> <p> </p> <p><span>Correspondence to Jeremy Young, jeremy.young@ucl.ac.uk</span></p> <p><span> </span></p>
Leptogenys pujoli, a new amazonian species, and the redescription of Leptogenys famelica Emery, 1896 (Formicidae: Ponerinae) - specimens_and_measurements
<p>This is a dataset with geographical informations and individual measurements for each specimen examined for our work about <em>Leptogenys famelica</em> redescription and <em>Leptogenys pujoli </em>description.</p>
Data from: Behavioral and neural measures of confidence using a novel auditory pitch identification task
<p>Observers can discriminate between correct versus incorrect perceptual decisions with feelings of confidence. The centro-parietal positivity build-up rate (CPP slope) has been suggested as a likely neural signature of accumulated evidence, which may guide both perceptual performance and confidence. However, CPP slope also covaries with reaction time, which also covaries with confidence in previous studies, and performance and confidence typically covary; thus, CPP slope may index signatures of perceptual performance rather than confidence per se. Moreover, perceptual metacognition – including neural correlates – has largely been studied in vision, with few exceptions. Thus, we lack understanding of domain-general neural signatures of perceptual metacognition outside vision. Here we designed a novel auditory pitch identification task and collected behavior with simultaneous 32-channel EEG in healthy adults. Participants saw two tone labels which varied in tonal distance on each trial (e.g., C vs D, C vs F), then heard a single auditory tone; they identified which label was correct and rated confidence. We found that pitch identification confidence varied with tonal distance, but performance, metacognitive sensitivity (trial-by-trial covariation of confidence with accuracy), and reaction time did not. Interestingly, however, while CPP slope covaried with performance and reaction time, it did not significantly covary with confidence. We interpret these results to mean that CPP slope is likely a signature of first-order perceptual processing and not confidence-specific signals or computations in auditory tasks. Our novel pitch identification task offers a valuable method to examine the neural correlates of auditory and domain-general perceptual confidence.</p>
Experimental measurements of the effects of surface roughness on large-scale downburst-like impinging jets at the WindEEE Dome laboratory
<p>Thunderstorm downbursts originate as negatively buoyant currents of cold air descending from cumulonimbus clouds. Upon impacting the ground, a strong radial outflow develops with maximum wind velocities occurring at the near-ground level. These types of flows pose serious hazard to the natural and built environment. Their restricted time and spatial extent as well as their intermittent and non-Gaussian fluctuating nature make them extremely challenging to be recorded and analyzed through classic full-scale measurements in nature. Alongside synoptic-scale extra tropical cyclones, downbursts govern the wind climate at the mid-latitude areas around the globe. Recent trends in climate change studies suggest both an increased intensity as well as frequency of occurrence of these events. Therefore, their scientific comprehension urges serious consideration.</p> <p>In the context of the project THUNDERR “Detection, simulation, modelling and loading of thunderstorm outflows to design wind-safer and cost-efficient structures”, financed by the European Research Council (ERC) Advanced Grant 2016 (grant No. 741273, P.I. Prof. Giovanni Solari, University of Genoa), an extensive experimental campaign was recently conducted at the WindEEE Dome wind chamber. This campaign focused on measuring downburst-like flows (DLFs) generated by large-scale impinging jets. The dataset presented here encompasses a portion of the measurements collected during this comprehensive experimental initiative. Specifically, this series of tests aimed to unravel the role of surface roughness in potentially altering the configuration and dynamics of the overall radial outflow. The term "surface roughness" pertains to the ground patch under examination, encompassing both the natural features of the terrain and any obstacles, such as buildings, present on the ground. While surface roughness plays a decisive role in changing the shape and magnitudes of the wind speed vertical profiles for extra-tropical cyclones, the scientific literature has not yet thoroughly addressed its impact on downburst winds, which are different being dominated by intense vortex dynamics.</p> <p>Impinging jets, considered representative for the simulation of downburst like flow (DLF), are here simulated as transient phenomena through the opening and closing of the bell-mouth that connects the test chamber and the upper plenum of the dome, the latter being pressurized before releasing the jet. As a result, the velocity records exhibit a distinct pattern, featuring a sudden ramp-up of velocity, followed by a velocity peak, a statistically-stationary phase, and ultimately, a gradual velocity deceleration—mirroring the behavior observed in real-world scenarios.</p> <p>The database consists of six ASCII tab-delimited text files, denoted as ‘windspeedDB89z0eq007.txt’, ‘windspeedDB89z0eq020.txt’, ‘windspeedDB89z0eq320.txt’, ‘windspeedDB124z0eq007.txt’, ‘windspeedDB124z0eq020.txt’, and ‘windspeedDB124z0eq320.txt’, aligning with the two jet intensities and three rough surfaces employed in the experiments. These filenames correspond to: (i) centerline jet velocities at the nozzle outlet section, with values of <em>Wjet</em> = 8.9 and 12.4 m/s (indicated as “<em>Wjet</em>” in the database files); (ii) equivalent full-scale roughness lengths <em>z0eq</em> = 0.007, 0.020, 0.32 m (“<em>z0eq</em>” in the database files, see details below). Each file encompasses wind speed timeseries, detailed as follows:</p> <p>The three-component velocity measurements were recorded by means of 11 Cobra probes (sampling frequency 2,500 Hz) mounted on a stiff mast. The heights (<em>z</em>) of the probes were <em>z</em> = 0.040, 0.070, 0.100, 0.125, 0.150, 0.200, 0.300, 0.400, 0.500, 0.700, 1.000 m above the surface. Within the database files, the wind speed linked to various heights is labeled as “<em>v_zXXXXmm</em>”. In this notation, '<em>v</em>' designates the velocity component: longitudinal ‘<em>U</em>’ (along the horizontal axis of the probe), corresponding to the radial outflow of the downburst, with a positive value when the flow is directed toward the probe. Transversal, ‘<em>V</em>’, represents the velocity component transverse to the probe's centerline axis, having a positive value when the flow is directed right-to-left concerning an observer facing the probe's head. The vertical component is denoted as ‘<em>W</em>’ with a positive value indicating an upward direction. The term “XXXX” signifies the height of the probe, specified in millimeters (mm). The mast with the Cobra probes was subsequently positioned at ten radial <em>r</em> distances with respect to the jet impingement position in the range <em>r/D</em> (<em>D</em> = 3.2 m is the jet diameter) between 0.2–2.0 with an increment of 0.2. Note that the position <em>r/D</em> = 0.8 was adjusted to <em>r/D</em> = 0.75. This modification was necessary due to irregularities on the chamber floor at <em>r/D</em> = 0.8, which could have otherwise introduced bias into the measurements. The radial distance is identified with “<em>r/D_distance</em>” in the dataset files. The ceiling height of the testing chamber is <em>H</em> = 3.75 m, which leads to <em>H/D</em> > 1 allowing for a full vertical development of the downburst radial outflow. For every <em>r/D</em> position, each experiment with the same initial condition (i.e., <em>Wjet</em>) was repeated 10 times (“<em>repetition#</em>” in the database files) to inspect the repeatability of the tests and their variance. Each velocity record lasted 12 s (12 × 2,500 = 30,000 samples) and the duration of the downburst-like part of the record varied between 3–5 s. Overall, 6,600 total time series (2 <em>Wjet</em> × 3 rough surface × 10 repetitions × 10 <em>r/D</em> positions × 11 heights <em>z</em>) of downburst-like outflows were recorded during this set of experimental tests.</p> <p>The reported accuracy of Cobra probes from the manufacturer is +/- 0.5 m/s and +/- 1° for velocity and yaw/pitch angles respectively, up to approximately 30% of turbulence intensity. All velocity magnitudes below 1 m/s were removed and converted to NaN (Not a Number) in the database due to the poor accuracy of Cobra probes for velocities below this threshold. In addition, some velocity values were reported as null in the instrument readings due to the incoming flow being outside the probe's spatial cone of measurement (+/- 45° in respect to the probe horizontal axis). These values are flagged as NULL values in the database. This notation aligns with that utilized in a preceding database of measurements collected within the same experimental campaign at the WindEEE Dome (Canepa et al., 2021; <a href="https://doi.org/10.1594/PANGAEA.931205">https://doi.org/10.1594/PANGAEA.931205</a>).</p> <p>DLFs were tested on three different surfaces: (i) WindEEE Dome bare floor; (ii) Carpet; (iii) Artificial grass. A 1 m × 8 m rectangular section was selected from each of the three surfaces for testing purposes. Each surface was positioned with a 1 m offset relative to the geometric location of the jet impingement. It was identified by an equivalent full-scale roughness length, “<em>z0eq</em>”based on matching atmospheric boundary layer profiles measured in WindEEE in boundary layer mode with standard ESDU (Engineering Science Data Unit) profiles. A total of 15 different Atmospheric Boundary Layer (ABL)-like profiles were tested inside the chamber by varying the rotation-per-minute (rpm) of the fans across the 4 rows of the 60-fan wall—a peripheral wall of the hexagonal WindEEE Dome chamber comprising a matrix of 4 × 15 (rows × columns) fans that is used to produce ABL -like flows. A specific configuration of the 60-fan wall and a length scale of 1:200 were chosen based on correlation analysis between physically reproduced ABL profiles and curve fitting through Eq. A1.8 of the ESDU 82026. This scale is deemed suitable for both ABL and downburst winds produced at the laboratory. Through a linear fitting of the measured data on the <em>U – ln(z)</em> chart, employing the logarithmic law-of-the-wall (dependent on roughness length <em>z0</em> and friction velocity <em>u*</em>), the equivalent roughness lengths for the three surfaces were determined: <em>z0eq</em> = 0.007, 0.020, 0.320 m for the WindEEE Dome bare floor, carpet, and artificial grass, respectively.</p> <p>In summary, each experimental velocity time series consists of 30,000 rows, with 33 columns detailing the three velocity components (<em>U</em>, <em>V</em>, <em>W</em>) across the 11 Cobra probe heights. Columns 34 to 37 provide information on the repetition number, radial position of measurement, equivalent full-scale roughness length, and jet intensity. The subsequent timeseries within the dataset refer to the parameters in columns 34 to 37, each one spanning its entire range in the specified order.</p> <p>Researchers can leverage this database to validate and calibrate numerical and analytical models of thunderstorm winds, in addition to interpreting full-scale measurements of the phenomenon. It also serves as a valuable resource for the fluid dynamics community, particularly those interested in the physical comprehension of downscaled flows or the surface flow dynamics of large Reynolds number impinging jets.</p>
Carnosine levels in the same individuals as measured by different modalities
<p>Carnosine is an endogenous di-peptide (b-alanine -L- histidine) involved in maintaining tissue homeostasis. It is most abundant in skeletal muscle where its concentration has been determined in biopsy samples using tandem mass spectrometry (MS-MS). Carnosine levels can also be assessed in intact leg muscles by proton magnetic resonance spectroscopy (1H-MRS) or in blood and urine samples using mass spectrometry. Nevertheless, it remains uncertain how carnosine levels from these distinct compartments are correlated with each other when measured in the same individual. Furthermore, it is unclear which measurement modality might be most suitable for large-scale clinical studies. Hence, in 31 healthy volunteers, we assessed carnosine levels in skeletal muscle, via 1H-MRS, and in erythrocytes and urine by MS-MS. While muscle carnosine levels were higher in males, there was no sex-associated difference in urinary or erythrocyte levels. In a linear regression model adjusted for age, sex, race, and diet, there was a positive association between erythrocyte and urinary carnosine. However, no association was observed between 1H-MRS and erythrocytes or urinary measures. In the relationship between muscle versus urinary and erythrocyte measures, females had a positive association, while males did not show any association. We also found that 1H-MRS measures were highly sensitive to location of measurement. Thus, it is uncertain whether 1H-MRS can accurately and reliably predict endogenous carnosine levels. In contrast, urinary and erythrocyte carnosine measures may be stable and in greater synchrony, and given financial and logistical concerns, may be a feasible alternative for large-scale clinical studies.</p>
GPR Dataset of Moisture Measurements on Building Floors in Laboratory and On-Site
<h2>GPR Moisture Measurements on Building Floors in Laboratory and On-Site</h2> <p><strong>Related work</strong></p> <p>Laboratory Study: <br>Combining Signal Features of Ground-Penetrating Radar to Classify Moisture Damage in Layered Building Floors<br>https://doi.org/10.3390/app11198820</p> <p>On-Site Study:<br>Classification of Practical Floor Moisture Damage Using GPR - Limits and Opportunities <br>https://doi.org/10.1007/s10921-024-01111-7</p> <p>Doctoral Thesis:<br>Non-destructive classification of moisture deterioration in layered building floors using ground penetrating radar<br>https://doi.org/10.14279/depositonce-19306</p> <p><strong>Measurement Parameters</strong></p> <p>The GPR measurements were carried out with the SIR 20 from GSSI and a 2 GHz antenna pair (bandwidth 1 GHz to 3 GHz) in common-offset configuration. Each B-Scan consists of N A-Scans, each including 512 samples of a 11 ns time window. Survey lines were recorded with 250 A-Scans/ meter, which equals a 4 mm spacing between each A-Scan No Gains were applied. </p> <p><strong>Folder Description:</strong></p> <p><em>Lab_dry, Lab_insulDamage, Lab_screedDamage</em><br>- each contain 168 Measurements (B-Scans) in .csv on 84 dry floors, floors with insulation damage and screed damage.<br>- each floor setup was measured twice on two orthogonal survey lines, indicated by _Line1_ and _Line2_ in the file name.<br>- the file names encode the building floor setup e.g. CT50XP100 describes a 50 mm cement screed with 100 mm extruded polystyrene below<br>- the material codes are<br> CT: cement screed, CA: anhydrite screed, EP: expanded polystyrene, XP: extruded polystyrene, GW: glass wool, PS: perlites</p> <p>further information can be found in the publication https://doi.org/10.3390/app11198820<br><br><em>OnSite_</em><br>- 5 folders containing B-Scans on 5 different practical moisture damages<br>- the building floor setup is encoded according to the lab with an additional measurement point numbering at the start and a damage case annotation at the end of the file name with _dry, _insulationDamage and_screedDamage<br><br><strong>File Description:</strong></p> <p><em>B-Scans, Measurement files - no header</em><br>- dimension: 512 x N data point with N beeing the number of A-Scans including 512 samples of a 11 ns time window. <br>- survey lines were recorded with 250 A-Scans/ meter, which equals a 4 mm spacing between each A-Scan</p> <p><em>Moisture References</em><br>- Moist_Reference of On-Site Locations include the columns MeasPoint: Measurement point, wt%Screed: moisture content of screed layer in mass percent; wt%Insul: moisture content of insulation layer in mass percent. References were obtained by drilling cores with 68 mm diameter in the center of each survey line.<br>- Moist_Reference_Screed of Lab data include the columns Screed: Screed material and thickness in mm, wt%Screed moisture content of screed layer in mass percent<br>- Moist Reference_Insul of Lab data include the columns Insulation: Insulation material and thickness in mm, water addition in l: water added to the insulation layer in liters, V%Insulation: water added to the insulation layer in volume percent, RH%: resulting relative humidy in the insulation layer during measurement. These References are only avaible for Lab measurements on insulation damages.</p> <p> </p> <p> </p>
DEDICAT 6G Smart warehousing latency measurements
<p>Comprises latency measurements from the Smart Warehousing piloting and testing activities with the use of two different networks. </p>
The Origin of the Lehmann Discontinuity beneath the Ancient Craton: Insight from the High Pressure-Temperature Elasticity Measurements of Topaz
<p>Data sets for the paper "The Origin of the Lehmann Discontinuity beneath the Ancient Craton: Insight from the High Pressure-Temperature Elasticity Measurements of Topaz".</p>
A detectable change in the air-sea CO2 flux estimate from sailboat measurements
<p>This repository contains files and scripts used to generate figures for the paper titled "A detectable change in the air-sea CO2 flux estimate from sailboat measurements". The study quantifies the impact of pCO2 observations measured by the sailboat "Seaexplorer" on the air-sea CO2 flux estimate.</p><p><strong> Overview:</strong></p><p>We used pCO2 measurements sourced from SOCAT (www.socat.info), along with other environmental variables. We applied the 2-step neural network method SOM-FFN (Landschützer et al., 2013) to reconstruct air-sea CO2 flux estimates.</p><p>Four sets of air-sea CO2 flux estimates were reconstructed, each with 40 ensemble members to account for random errors in the neural network. These are the four sets:</p><p>E1) fluxesA - Based on SOCATv2022 including Seaexplorer data</p><p>E2) fluxesB - Based on SOCATv2022 excluding Seaexplorer data.</p><p>E3) fluxesC - Based on SOCATv2022 data, including Seaexplorer data, but introducing a random uncertainty of ± 5 μatm to the Seaexplorer data.</p><p>E4) fluxesD - Based on SOCATv2022 data, including Seaexplorer data, but introducing a constant measurement offset of 5 μatm to the Seaexplorer data.</p><p>These air-sea CO2 flux density estimates are 4-dimensional, represented in mol C m-2 yr-1, with the following dimensions:</p><p>- Ensemble size of flux reconstructions (40)</p><p>- Time (months from 1982 to 2021, totaling 480 months)</p><p>- Latitude (1-degree intervals, totaling 180 latitudes)</p><p>- Longitude (1-degree intervals, totaling 360 longitudes)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.