Skip to main content
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

497

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

497 results for “campaign”

Learn how ShareScore rates datasets ↗
nasa28/100

Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) Data from the BARC 2001 Campaign

The AirMISR BARC 2001 data were acquired during a flight over the Beltsville Agricultural Research Center (BARC) on July 21, 2001. The Jet Propulsion Laboratory (JPL) in Pasadena, California provided the data. The Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) is an airborne instrument for obtaining multi-angle imagery similar to that of the satellite-borne Multi-angle Imaging SpectroRadiometer (MISR) instrument, which is designed to contribute to studies of the Earth's ecology and climate. AirMISR flies on the NASA ER-2 aircraft. The Jet Propulsion Laboratory in Pasadena, California built the instrument for NASA. Unlike the satellite-borne MISR instrument, which has nine cameras oriented at various angles, AirMISR uses a single camera in a pivoting gimbal mount. A data run by the ER-2 aircraft is divided into nine segments, each with the camera positioned to a MISR look angle. The gimbal rotates between successive segments, such that each segment acquires data over the same area on the ground as the previous segment. This process is repeated until all nine angles of the target area are collected. The swath width, which varies from 11 km in the nadir to 32 km at the most oblique angle, is governed by the camera's instantaneous field-of-view of 7 meters cross-track x 6 meters along-track in the nadir view and 21 meters x 55 meters at the most oblique angle. The along-track image length at each angle is dictated by the timing required to obtain overlap imagery at all angles, and varies from about 9 km in the nadir to 26 km at the most oblique angle. Thus, the nadir image dictates the area of overlap that is obtained from all nine angles. A complete flight run takes approximately 13 minutes. The 9 camera viewing angles are: 0 degrees or nadir 26.1 degrees, fore and aft 45.6 degrees, fore and aft 60.0 degrees, fore and aft 70.5 degrees, fore and aft. For each of the camera angles, images are obtained at 4 spectral bands. The spectral bands can be used to identify vegetation and aerosols, estimate surface reflectance and ocean color studies. The center wavelengths of the 4 spectral bands are: 443 nanometers, blue 555 nanometers, green 670 nanometers, red 865 nanometers, near-infrared Two types of AirMISR data products are available - the Level 1 Radiometric product (L1B1) and the Level 1 Georectified radiance product (L1B2).

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Student Airborne Research Program (SARP) Campaign, California, 2012

This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument collected and developed by the Student Airborne Research Program (SARP). The spectral data were collected from flights flown on 2012-06-25 to 2012-06-27 over southern California, U.S., in a Lockheed P-3B Orion aircraft. SARP was an eight-week summer program for junior and senior undergraduate students to acquire hands-on research experience in all aspects of a scientific campaign using airborne science laboratories. The SARP 2012 deployment included five flights with 19 flight tracks. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 20-meter spatial resolution. The L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

ACT-America Campaign Catalog

The ACT-America Campaign Catalog provides information about the airborne campaigns of the Atmospheric Carbon and Transport (ACT-America) project. ACT-America advanced atmospheric greenhouse gas inversions to a high level of accuracy and precision through new methods and models that improved knowledge of atmospheric transport, prior flux models, and space-based observations. The catalog compiles flight details for the five campaigns conducted during Summer 2016, Winter 2017, Fall 2017, Spring 2018, and Summer 2019 (2016-05-27 to 2019-07-26) across three regions of the eastern and central United States. Data include flight dates, regions, objectives, weather conditions, instrument status, aircraft flight paths, detailed weather reports, and measurement summary figures. A total of 121 research flights were conducted within the five six-week seasonal campaigns by each of the two instrumented aircraft platforms, the NASA Langley Beechcraft B-200 King Air and the NASA Wallops Flight Facility's C-130 Hercules. During 1,140 flight hours remote and in situ sensors onboard the two research aircraft measured greenhouse gas mole fractions, trace gases, and thermodynamic variables across a variety of continental surfaces and atmospheric conditions to study the transport and fluxes of atmospheric carbon dioxide and methane. As noted in the Flight_patterns_staus field, there were flights when both aircraft flew directly under Orbiting Carbon Observatory-2 (OCO-2) overpasses to evaluate the ability of OCO-2 to observe high-resolution atmospheric CO2 variations. The C-130 aircraft was also equipped with active remote sensing instruments for planetary boundary layer height detection and column greenhouse gas measurements. The data are provided in comma separated values (CSV), compressed Keyhole Markup Language (KMZ) formats along with figures as JPEG and Portable Network Graphics images.

restrictednotspecifiedJun 2025View details →
nasa28/100

Drifter data for the SPURS-1 N. Atlantic field campaign

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is an oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project involves two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-1 campaign involved a series of 5 cruises during 2012 - 2013 seeking to characterize the salinity structure and balance in a high salinity, high evaporation, and low rainfall region of the subtropical North Atlantic. It aims to resolve processes responsible for maintaining the subtropical surface salinity maximum in this region and within a 900 x 800-mile square study area centered at 25N, 38W. Approximately 83 drifters were deployed during the SPURS-1 campaign. A drifter is a passive Lagrangian sensor platform consisting of a surface buoy and tethered subsurface drogue. Drifter buoys contain GPS/ARGOS and satellite data transmitters, with sensors measuring temperature and other properties. For SPURS-1, these were standard Surface Velocity Program (SVP) drifters with salinity sensors added (SVP/S). Data for both US and European drifter deployments during SPURS-1 are available here. For each series, drifter data have been aggregrated within single netCDF data filea with their corresponding drifter-IDs and associaciated near-surface salinity, temperaure georeferenced (GPS and ARGOS) trajectory series data.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Student Airborne Research Program (SARP) Campaign, California, 2014

This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument collected and developed by the Student Airborne Research Program (SARP). The spectral data were collected from flights flown on 2014-06-23 to 2014-06-25 over southern California, U.S., in a NASA DC-8 aircraft. SARP was an eight-week summer program for junior and senior undergraduate students to acquire hands-on research experience in all aspects of a scientific campaign using airborne science laboratories. The SARP 2014 deployment included three flights with 17 flight tracks. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 20-meter spatial resolution, and the L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

SASSIE Arctic Field Campaign Under Ice Float Fall 2022 Version 1

The Salinity and Stratification at the Sea Ice Edge (SASSIE) project is a NASA experiment that aims to understand how salinity anomalies in the upper ocean generated by melting sea ice affect sea surface temperature (SST), stratification, and subsequent sea-ice growth. SASSIE involved a field campaign that sampled the transition from summer melt to autumn ice advance in the Beaufort Sea during August-October 2022, making intensive in situ and remote sensing observations within ~200 km of the sea ice edge. This dataset contains ocean temperature, salinity, and acoustic range measurements collected by an autonomous under ice float deployed in the Beaufort Sea from September 10, 2022 to October 22, 2022. Data are available in netCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

SASSIE Arctic Field Campaign Shipboard uCTD Data Fall 2022 Version 1

The Salinity and Stratification at the Sea Ice Edge (SASSIE) project is a NASA experiment that aims to understand how salinity anomalies in the upper ocean generated by melting sea ice affect sea surface temperature (SST), stratification, and subsequent sea-ice growth. SASSIE involved a field campaign that sampled the transition from summer melt to autumn ice advance in the Beaufort Sea during August-October 2022, making intensive in situ and remote sensing observations within ~200 km of the sea ice edge. This dataset contains in-situ profiles of upper ocean temperature and salinity taken with a Shipboard Underway Conductivity-Temperature-Depth instrument (uCTD). A total of 2,246 profiles were taken over the sampling period, with mean depth of 100 m and mean horizontal spacing between profiles of ~800 m. Profiling with the uCTD typically occurred as the ship was moving at 1-3 m/s. For higher sea ice concentrations (10-30 %), the ship stopped every ~30 minutes to collect a profile. The measurements have been gridded onto a uniformly spaced 0.1 dbar grid from the sea surface to 200 dbar seawater pressure, and collected into a single netCDF file, where each observation in the time dimension corresponds to a single cast.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Student Airborne Research Program (SARP) Campaign, California, 2010

This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument collected and developed by the Student Airborne Research Program (SARP). The spectral data were collected from flights flown on 2010-06-28 to 2010-07-01 over southern California, U.S., in a NASA DC-8 aircraft. SARP was an eight-week summer program for junior and senior undergraduate students to acquire hands-on research experience in all aspects of a scientific campaign using airborne science laboratories. The SARP 2010 deployment included three flights with 21 flight tracks. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 10-meter spatial resolution. The L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: HyspIRI Airborne Campaign, California, Fall 2014

This dataset includes Level 1B (L1B) and Level 2 (L2) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected as part of the Hyperspectral Infrared Imager (HyspIRI) mission's preparatory airborne campaign during seven flights aboard a NASA ER-2 aircraft over California and Nevada, U.S., from 2014-09-19 to 2014-11-24. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 50-meter spatial resolution. Derived L2 data products are emissivity in 5 bands in thermal infrared range (8.58 to 12.13 micrometers) and land surface temperature. The L1B file format is HDF-4, and L2 products are provided in ENVI and KMZ formats. In addition, the dataset includes the flight path, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

SASSIE Arctic Field Campaign PALS Data Fall 2022

The Salinity and Stratification at the Sea Ice Edge (SASSIE) project is a NASA experiment that aims to understand how salinity anomalies in the upper ocean generated by melting sea ice affect sea surface temperature (SST), stratification, and subsequent sea-ice growth. SASSIE involved a field campaign that sampled the transition from summer melt to autumn ice advance in the Beaufort Sea during August-October 2022, making intensive in situ and remote sensing observations within ~200km of the sea ice edge. The Passive-Active L-Band System (PALS) is an airborne microwave radiometer that senses ocean temperature and surface wind speed. The brightness temperature data is obtained at 1.4GHz using the PALS conical scanner, with the raw data sampled at 1ms and gridded over an approximate 2x2km grid. Several quality control steps were done to remove any scan dependent biases, radio frequency interference, wind-speed dependencies. Calibration of the sensor was done with respect to special aircraft maneuvers as well as in-situ samples. Brightness temperature were converted to salinity via the Klein-Swift salinity retrieval model. Data is available in netCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

ECHIDNA LIDAR Campaigns: Forest Canopy Imagery and Field Data, U.S.A., 2007-2009

This data set contains forest canopy scan data from the Echidna® Validation Instrument (EVI) and field measurements data from three campaigns conducted in the United States: 2007 New England Campaign; 2008 Sierra National Forest Campaign; and 2009 New England Campaign. The New England field sites were located in Harvard Forest (Massachusetts), Howland Research Forest (Maine), and the Bartlett Experimental Forest (New Hampshire).The objective of the research was to evaluate the ability of the EVI ground-based, scanning near-infrared lidar to retrieve stem diameter, stem count density, stand height, leaf area index, foliage profile, foliage area volume density, and other useful forest structural parameters rapidly and accurately.The EVI scan data are Andrieu Transpose (AT) Projection images in ENVI *.img and *.hdr file pairs. There are 28 images from the 2007 New England Campaign, 30 images from the 2008 Sierra National Forest Campaign, and 54 images from the 2009 New England Campaign. There are range-weighted mean preview image files (.jpg format) for each AT Projection image.Manual measurements of tree structural properties were made during each campaign at EVI scan locations. The field measurements are provided in one file for each campaign (.csv format). Parameters include species identification, DBH, tree height, crown base, etc. organized by field plot. There is also a data file (.csv format) which compares EVI derived measurements to the field measured data (DBH, stem density, basal area, biomass, and LAI) from the 2007 New England Campaign.

restrictednotspecifiedApr 2025View details →
nasa28/100

SPURS-2 Surface Salinity Snake data for the E. Tropical Pacific field campaign R/V Revelle cruises

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is a NASA-funded oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project is comprised of two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D, SMAP and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-2 campaign involved two month-long cruises by the R/V Revelle in August 2016 and October 2017 combined with complementary sampling on a more continuous basis over this period by the schooner Lady Amber. Focused around a central mooring located near 10N,125W, the objective of SPURS-2 was to study the dynamics of the rainfall-dominated surface ocean at the western edge of the eastern Pacific fresh pool subject to high seasonal variability and strong zonal flows associated with the North Equatorial Current and Countercurrent. The Salinity Snake (SS) measures sea surface salinity in the top 1 - 2 cm of the water column, which is the radiometric depth of L-Band satellite radiometers such as on Aquarius/SAC-D, SMAP and SMOS satellites that measure salinity remotely. The SS consists of four key components: a 10m boom mast, a hose, which is deployed from this boom, a powerful self-priming peristaltic pump which transports a constant stream of a seawater/air emulsion, and a shipboard apparatus, which filters, de-bubbles, sterilizes and analyses the salinity of the water. The SS was deployed during both SPURS-2 Revelle cruises. SS data series are provided in netCDF file format, one per cruise.

restrictednotspecifiedApr 2025View details →
nasa28/100

SPURS-2 S/V Lady Amber underway Thermosalinograph and Sea Snake data for the E. Tropical Pacific field campaign

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is a NASA-funded oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project is comprised of two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D, SMAP and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-2 campaign involved two month-long cruises by the R/V Revelle in August 2016 and October 2017 combined with complementary sampling on a more continuous basis over this period by the schooner Lady Amber. Focused around a central mooring located near 10N,125W, the objective of SPURS-2 was to study the dynamics of the rainfall-dominated surface ocean at the western edge of the eastern Pacific fresh pool subject to high seasonal variability and strong zonal flows associated with the North Equatorial Current and Countercurrent. Underway physical data from 6 cruises undertaken by the schooner Lady Amber during the SPURS-2 field campaign include along-track meteorological, salinity snake and fixed-hull CTD measurements at 1m and 2 m intake depths. Comparisons with nearby Revelle data facilitate evaluation of uncertainties arising from collecting data from a sailboat, and the characterization of small-scale spatial variability in the ocean and atmosphere. Data files are in netCDF CD/ACDD standards compliant format.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Suomi-NPP Airborne Campaign, Greenland, 2015

This dataset includes Level 1B (L1B) and Level 2 (L2) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected for the Suomi National Polar-orbiting Partnership (Suomi-NPP) instrument validation airborne campaign during 10 flights aboard a NASA ER-2 aircraft over Greenland, portions of the conterminous U.S., and Canada from 2015-02-23 to 2015-03-31. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 50-meter spatial resolution. Derived L2 data products are emissivity in 5 bands in thermal infrared range (8.58 to 12.13 micrometers) and land surface temperature. The L1B file format is HDF-4, and L2 products are provided in ENVI and KMZ formats. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: HyspIRI Airborne Campaign, California, Early Spring 2013, V2

This dataset includes Level 1B (L1B) and Level 2 (L2) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected as part of the Hyperspectral Infrared Imager (HyspIRI) mission's preparatory airborne campaign during 6 flights aboard a NASA ER-2 aircraft over California and Nevada, U.S., from 2013-03-26 to 2013-04-19. An additional purpose of this campaign was an underpass of Landsat 8. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 50-meter spatial resolution. Derived L2 data products are emissivity in 5 bands in thermal infrared range (8.58 to 12.13 micrometers) and land surface temperature. The L1B file format is HDF-4, and L2 products are provided in ENVI and KMZ formats. In addition, the dataset includes the flight path, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

ATom: ARMAS Program Absorbed and Equivalent Radiation Dose Rates for ATom-1 Campaign

This dataset contains Level 2 (L2) absorbed radiation dose rates in silicon from the Automated Radiation Measurements for Aerospace Safety (ARMAS) system along ATom flight paths for the ATom-1 campaign conducted in July and August 2016. Absorbed dose rates measure how much energy is deposited in matter by ionizing radiation per unit time. The radiation sources can be from galactic cosmic rays, solar energetic particles, or Van Allen radiation belt energetic particles. Radiation can have adverse effects on human tissue and aerospace electronics, as well as profound effects on chemical species in the atmosphere, making them important to consider in atmospheric modeling and analyses. In this context, the derived ambient equivalent dose rates are also provided and relate the absorbed dose in human tissue to the effective biological damage of the radiation through a radiation weighting factor. In addition, visualizations of absorbed radiation dose for ATom-1 flight paths are included. The visualizations show the absorbed dose rates in silicon in the upper panel and the 3D representation of the flight in the bottom panel.

restrictednotspecifiedApr 2025View details →
nasa28/100

SPURS-2 PICO mooring data for the E. Tropical Pacific field campaign

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is a NASA-funded oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project is comprised of two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D, SMAP and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-2 campaign involved two month-long cruises by the R/V Revelle in August 2016 and October 2017 combined with complementary sampling on a more continuous basis over this period by the schooner Lady Amber. Focused around a central mooring located near 10N,125W, the objective of SPURS-2 was to study the dynamics of the rainfall-dominated surface ocean at the western edge of the eastern Pacific fresh pool subject to high seasonal variability and strong zonal flows associated with the North Equatorial Current and Countercurrent. Two PICO moorings (PMEL 9N and 11N) were deployed on the Revelle cruise in September 2016 in northern and southern domain quadrants at 9deg2.830N, 124deg59.833W and N10:59.0498, W124:57.531 respectively. These moorings contained a surface meteorological package and a "prawler", a CTD that crawls up and down the mooring line from 4-450m, yielding time series of salinity and temperature profile data at fixed locations (nominally 8 profiles per day). The moorings were recovered on the second Revelle cruise (Oct. 22 & Nov. 2, 2017). PICO mooring netCDF files contain georeferenced CTD profile data including salinity, temperature, potential temperature, pressure, depth, surface meteorological package data, GPS-Lat/Lon, and profile ID.

restrictednotspecifiedApr 2025View details →
nasa28/100

Seaglider CTD data for the SPURS-1 N. Atlantic field campaign

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is an oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project involves two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-1 campaign involved a series of 5 cruises during 2012 - 2013 seeking to characterize the salinity structure and balance in a high salinity, high evaporation, and low rainfall region of the subtropical North Atlantic. It aims to resolve processes responsible for maintaining the subtropical surface salinity maximum in this region and within a 900 x 800-mile square study area centered at 25N, 38W. The Seaglider is an autonomous profiler measuring salinity and temperature. Three Seagliders were deployed on the Knorr cruise in September 2012. These were retrieved during the first Endeavor cruise, and then redeployed. The Seagliders typically made loops or butterfly patterns around the central SPURS mooring, diving to 1000 m. Seaglider data files contain vertically resolved trajectory series of conductivity, salinity, temperature, pressure, depth observations.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Cloud And Land Surface Interaction Campaign, California-Oklahoma, 2007

This dataset includes Level 1B (L1B) and Level 2 (L2) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected during two flights aboard a NASA ER-2 aircraft over California, Arizona, New Mexico, Texas, and Oklahoma, U.S., from 2007-09-20 to 2007-09-21. This data collection supported the Cloud And Land Surface Interaction Campaign (CLASIC), a cross-disciplinary interagency research effort to study cumulus convection as an important component in the atmospheric radiation budget and hydrologic cycle of the Southern Great Plains (SGP). Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 50-meter spatial resolution. Derived L2 data products are emissivity in 5 bands in thermal infrared range (8.58 to 12.13 micrometers) and land surface temperature. The L1B file format is HDF-4, and L2 products are provided in ENVI and KMZ formats. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

Ecomapper data for the SPURS-1 N. Atlantic field campaign

The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is an oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project involves two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-1 campaign involved a series of 5 cruises during 2012 - 2013 seeking to characterize the salinity structure and balance in a high salinity, high evaporation, and low rainfall region of the subtropical North Atlantic. It aims to resolve processes responsible for maintaining the subtropical surface salinity maximum in this region and within a 900 x 800-mile square study area centered at 25N, 38W. The Ecomapper or IVER is a portable autonomous underwater vehicle (AUV) capable carrying a range of sensor payloads. For SPURS-1 these included CTD, chlorophyll, oxygen and turbidity sensors. Ecomapper was deployed on two days during the Knorr cruise, 29 and 30 September 2012. The resulting Knorr Ecomapper data files include deployment event information and contain trajectory-depth profile series of chlorophyll, turbidity, oxygen, conductivity, with salinity, and temperature observations from two sensors.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.