Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
141
datasets available to search
ShareScore release 0.9.0
Dataset results
141 results for “378”
IODP Expedition 378 Micropaleontology
Paleontological data were collected using microscopes and recorded in the JRSO description software. All data for a species group (e.g., diatoms or nannofossils) were collected in a Microsoft Excel worksheet by hole. A zip file of the entire expedition's observations is also available.
IODP Expedition 378 Color reflectance
Color reflectance data were measured on section halves using an integration sphere and a UV-VIS spectrophotometer mounted on the Section Half Multisensor Logger (SHMSL). Spectral counts are recorded in the range of 380 to 700 nm, covering the visible spectrum, and binned in ~2 nm bins. Spectral data are reduced from spectra and recorded in tristimulus XYZ values, CieLAB L*a*b* values, and other units.
IODP Expedition 378 Core summary
Report includes detailed core data: drilling and coring depths, advancement, recovered core length measured on the catwalk and final curated length, core recovery, and sections cut.
IODP Expedition 378 Carbonates composite report
This composite report includes data from two analyses (total carbon from Elemental analysis [CHNS], and inorganic carbon from [Coulometer]). Each row combines the CHNS and Coulometer data from measurements made on the same sample at the same time for a particular section and section offset (depth). If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate data type (Elemental analysis and Coulometer). If the same sample was measured multiple times by any of the methods, results in the report will be combined on one line where possible. Each additional replicate result will be shown in subsequent rows and will be combined where possible. Report includes results for carbon forms: total, inorganic, calcium carbonate, and organic by difference, along with total hydrogen, nitrogen, and sulfur.
IODP Expedition 378 Core composite images
A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.
IODP Expedition 378 Section summary
Report includes data for individual core sections: coring/drilling depths and recovery, database identifiers for the whole section and section halves, and number of samples taken from the section before and after splitting.
IODP Expedition 378 Compressional strength (penetrometer)
Compressional strength was measured on section halves using a Humbolt Manufacturing Pocket Penetrometer. The penetrometer is only suitable for sediment not affected by cementation (i.e., saturated, clay-rich, soft sediment). Shear strength can be calculated from the measured compressional strength. Compressional strength measurements should be considered only approximate, particularly because the influence of pore pressure changes during the undrained experiment cannot be estimated. Report includes compressional strength results, penetration direction, and adapter foot information.
IODP Expedition 378 Formation temperature
Formation temperature was measured by the advanced piston corer temperature tool (APCT-3), Sediment Temperature Tool (SET), or sediment temperature pressure tool (SETP) and reduced to in situ temperature and (for SETP) pressure estimates. These data are compiled per instrument run and assigned to a core (the core cut with the APCT-3 cutting shoe or the core following the SET deployment).
IODP Expedition 378 Gas safety report
This composite report returns data from two different gas chromatograph configurations (GC3 and NGA). Each row combines data from several measurements made on the same sample at the same time for a particular headspace or vacutainer sample. If data do not exist for a particular expedition, the column does not appear. Gas samples were measured by gas chromatography and either flame ionization detection (GC-FID) or thermal conductivity detection (GC-TCD). Reported analytes may include methane, ethane, ethene, propane, propene, n-butane, i-butane, n-pentane, i-pentane, n-hexane, i-hexane, n-heptane, i-heptane, nitrogen, oxygen, carbon monoxide, carbon dioxide, and hydrogen sulfide. When data are available, methane to (ethane + ethene) ratio (C<sub>1</sub>/C<sub>2</sub>�ratio) is reported. To identify individual samples and tests, see each separate analysis (GC3, NGAFID, and/or NGATCD).
IODP Expedition 378 Bulk Density (GRA)
Gamma ray attenuation (GRA) data were acquired using a Cs-137 collimated source and a sodium iodide (thallium), or NaI(Tl), scintillation detector. The signal was calibrated using water and aluminum standards to provide a proxy for bulk density. This measurement was performed by a sensor mounted on either the Whole-Round Multisensor Logger (WRMSL) or the Special Task Multisensor Logger (STMSL); which track was used for a given data set is indicated in the data.
IODP Expedition 378 Inorganic carbon (coulometer)
Inorganic carbon (carbonate) is determined by coulometry, which uses a photodetection cell to measure carbon dioxide evolved during sample acidification. Report includes percent inorganic carbon and calcium carbonate.
IODP Expedition 378 ICP-AES elemental analysis (solids)
Elemental contents in hard rock and sediment samples was measured by inductively coupled plasma - atomic emission spectrocopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.
IODP Expedition 378 Ion chromatography
Cation and anion concentration in interstitial water samples was measured by ion chromatography using a conductivity detector. Cation analytes include calcium, magnesium, potassium, and sodium. Anion analytes include chloride, sulfate, and bromide.
IODP Expedition 378 Moisture and Density
Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.
IODP Expedition 378 Magnetic susceptibility (whole round)
Magnetic susceptibility was measured on whole-round sections (and rarely section halves) on the Whole-Round Multisensor Logger (WRMSL) and/or Special Task Multisensor Logger (STMSL) using a Bartington MS2 meter and a 90 mm or 80 mm MS2C loop. As volume of the sample is not controlled for this experiment, susceptibility units are recorded in instrument units and are not volume-corrected.
IODP Expedition 378 Interstitial water composite report
This composite report includes data from numerous interstitial water (IW) analyses (e.g., ICP-LIQUIDS and IONCHROM) in a variable set of columns. Each row combines the data from several tests (groups of measurements made on the same sample at the same time) for a particular IW sample. If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate analysis (ALKALINITY, ICP-LIQUIDS, IONCHROM, SALINITY, SPEC, TITRATOR, and potentially others). Major and minor elements were determined by inductively coupled plasma-atomic emission spectrocsopy (ICP-LIQUIDS). Cations and anions were measured by ion chromatography (IONCHROM). Complex ions were measured by colorimetric measurements using a UV-VIS spectrometer (SPEC). Alkalinity and chloride was measured by titration (ALKALINITY and TITRATOR). Dissolved carbon (DC), dissolved inorganic carbon (DIC), and dissolved organic carbon (DOC) were measured by combustion in a total organic carbon (TOC) analyzer. Salinity was measured by refractometer (SALINITY). pH was measured by ion-selective electrode as part of the alkalinity procedure and is reported in the ALKALINITY analysis.
IODP Expedition 378 Elemental analysis (CHNS)
Fundamental elemental component (total carbon, hydrogen, nitrogen, and sulfur) fluctuations help define the origin, depositional environment, and diagenetic alteration of source materials. To determine C, H, N, and S, solid samples are reacted with a catalyst, separated by chromatography, and detected by thermal conductivity on a FlashEA 1112 CHNS elemental analyzer. Organic carbon can be directly measured on the elemental analyzer by acidification of the sample to drive off carbonate as carbon dioxide before analyzing. Total organic carbon on this report is measured rather than calculated.
IODP Expedition 378 ICP-AES elemental analysis (interstitial water)
Elemental concentration in interstitial water samples was measured by inductively coupled plasma - atomic emission spectroscopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.
IODP Expedition 378 X-ray diffraction (XRD)
X-ray diffraction (XRD) is used to identify minerals and their proportions in sediment or hard rock sample powders on a Bruker AXS D4 Endeavor X-ray diffractometer. Results are returned as diffractograms in a viewable format (either PDF or PNG).
IODP Expedition 378 Natural gamma radiation
Natural gamma radiation (NGR) data in the ~0.1 to 3.0 MeV range were measured using eight custom-designed sodium iodide (thallium) [NaI(Tl)] detectors arranged along the core measurement axis at 20 cm intervals. The NGR system uses layers of passive shielding (lead) and active shielding (plastic scintillators and coincidence electronics) to reduce the cosmic-ray signal for low-count analysis of sediment core sections and to obtain the maximum signal-to-noise ratio. Data are reported on a total counts per second basis and the raw spectral files are available as compressed files for later analysis.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.