Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
49
datasets available to search
ShareScore release 0.9.0
Dataset results
49 results for “Expedition 351”
IODP Expedition 351 Inorganic carbon (coulometer)
<p>Inorganic carbon (carbonate) is determined by coulometry, which uses a photodetection cell to measure carbon dioxide evolved during sample acidification. Report includes percent inorganic carbon and calcium carbonate.</p>
IODP Expedition 351 Bulk Density (GRA)
<p>Gamma ray attenuation (GRA) data were acquired using a Cs-137 collimated source and a sodium iodide (thallium), or NaI(Tl), scintillation detector. The signal was calibrated using water and aluminum standards to provide a proxy for bulk density. This measurement was performed by a sensor mounted on either the Whole-Round Multisensor Logger (WRMSL) or the Special Task Multisensor Logger (STMSL); which track was used for a given data set is indicated in the data.</p>
IODP Expedition 351 Moisture and Density
<p>Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.</p>
IODP Expedition 351 Core summary
<p>Report includes detailed core data: drilling and coring depths, advancement, recovered core length measured on the catwalk and final curated length, core recovery, and sections cut.</p>
IODP Expedition 351 Carbonates composite report
<p>This composite report includes data from two analyses (total carbon from Elemental analysis [CHNS], and inorganic carbon from [Coulometer]). Each row combines the CHNS and Coulometer data from measurements made on the same sample at the same time for a particular section and section offset (depth). If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate data type (Elemental analysis and Coulometer). If the same sample was measured multiple times by any of the methods, results in the report will be combined on one line where possible. Each additional replicate result will be shown in subsequent rows and will be combined where possible. Report includes results for carbon forms: total, inorganic, calcium carbonate, and organic by difference, along with total hydrogen, nitrogen, and sulfur.</p>
IODP Expedition 351 Sample report
<p>Report includes detailed information about samples taken for testing: location/depth, type/form factor, test, request number, and database identifier.</p>
IODP Expedition 351 ICP-AES elemental analysis (interstitial water)
<p>Elemental concentration in interstitial water samples was measured by inductively coupled plasma - atomic emission spectroscopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.</p>
IODP Expedition 351 Vane shear strength (AVS)
<p>Shear strength was measured on section halves using a GEISA automated vane shear (AVS) frame and device controller. The device is suitable for sediment not affected by cementation (i.e., saturated, clay-rich, soft sediment). Shear strength measurements should be considered only approximate, particularly because the influence of pore pressure changes during the undrained experiment cannot be estimated. Report includes vane shear strength at the sample's failure point, maximum torque angle, penetration direction, and rate of vane rotation.</p>
IODP Expedition 351 Alkalinity and pH
<p>Alkalinity was determined by Gran titration with an autotitrator (Metrohm 794 basic Titrino) using 0.1 M HCl at 20 degrees C. Report includes alkalinity, correction factor (if applicable), and pH.</p>
IODP Expedition 351 Color reflectance
<p>Color reflectance data were measured on section halves using an integration sphere and a UV-VIS spectrophotometer mounted on the Section Half Multisensor Logger (SHMSL). Spectral counts are recorded in the range of 380 to 700 nm, covering the visible spectrum, and binned in ~2 nm bins. Spectral data are reduced from spectra and recorded in tristimulus XYZ values, CieLAB L*a*b* values, and other units.</p>
IODP Expedition 351 Ion chromatography
<p>Cation and anion concentration in interstitial water samples was measured by ion chromatography using a conductivity detector. Cation analytes include calcium, magnesium, potassium, and sodium. Anion analytes include chloride, sulfate, and bromide.</p>
IODP Expedition 351 Magnetic remanence (SRM-longcore)
<p>Magnetic remanence was measured on section halves (and rarely on whole-round sections) using a 2G Enterprises 760R cryogenic magnetometer, first as natural remanent magnetization (NRM) and then after demagnetization steps were performed on the samples by alternating field (AF) demagnetizer coils mounted in-line within the instrument.</p>
IODP Expedition 351 Closeup images
<p>Close-up images taken by digital cameras as requested by the science party, typically when the section-half image is not sufficient. Close-up photographs of the areas of interest may be taken from whole-round sections, pieces, or section halves in sediments and rock.</p>
IODP Expedition 351 Photomicrographs
<p>Microscopic images of discrete samples were acquired using stereo and upright light microscopes and captured on digital cameras. Image files were uploaded along with a brief description and a record of the microscopic and lighting conditions when the image was taken.</p>
IODP Expedition 351 Whole-round core section composite 360 degree images
<p>Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.</p>
IODP Expedition 351 Thin section images
<p>Hard rock and sediment thin section images were acquired using either the JRSO-developed Petrographic Image Capture and Archival Tool (PICAT) imager or (rarely) an upright microscope and a digital camera. Sample images are acquired in unpolarized, polarized, and/or cross-polarized light. Image files are presented compressed by hole.</p>
IODP Expedition 351 Core composite images
<p>A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.</p>
IODP Expedition 351 Whole-round core section images
<p>Images of the outside of hard rock whole-round sections were acquired using a linescan imager (Section Half Imaging Logger [SHIL]) and a special holder that allows each 90 degree segment of the outer surface to be positioned properly. The images were taken at a resolution of 20 lines/mm (50 micropixels). JRSO staff take these quadrant images and compile them into a side-by-side rollout photograph of the section. Composite images are available as both JPG and TIF image formats. Individual quadrant images are available as JPG images only through this report; contact the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a> if quadrant TIF files (~160 MB) are needed.</p>
IODP Expedition 351, Hole U1438D - Well Logging Data
<p>Logging data are measurements of physical properties of the formation surrounding a borehole, acquired in situ after completion of coring (wireline logging) or during drilling (Logging-While-Drilling, LWD). The range of data (resistivity, gamma radiation, velocity, density, borehole images,…) in any hole depends on the scientific objectives and operational constraints.</p>
IODP Expedition 351, Hole U1438F - Well Logging Data
<p>Logging data are measurements of physical properties of the formation surrounding a borehole, acquired in situ after completion of coring (wireline logging) or during drilling (Logging-While-Drilling, LWD). The range of data (resistivity, gamma radiation, velocity, density, borehole images,…) in any hole depends on the scientific objectives and operational constraints.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.