Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
43
datasets available to search
ShareScore release 0.9.0
Dataset results
43 results for “Expedition 355”
IODP Expedition 355 P-wave velocity caliper (section)
P-wave velocity data were measured on undisturbed section halves (JRSO-defined x-axis) and/or discrete cube and cylinder samples (x, y, or z-axis) using pairs of piezoelectric transducers mounted on a caliper system. Report includes P-wave velocity in x, y, and/or z-direction, caliper separation, traveltime between transucers, and first arrival picks.
IODP Expedition 355 P-wave velocity logger (whole round)
P-wave velocity data were measured on whole-round sections on the Whole-Round Multisensor Logger (WRMSL) using pairs of piezoelectric transducers mounted on a caliper system. Measurements may be affected by degassing of pore fluid and microfracturing during core recovery. Report includes P-wave velocity in x-y plane and distance and traveltime between transducers.
IODP Expedition 355 P-wave velocity bayonet (section)
P-wave velocity data were measured on undisturbed section halves using pairs of piezoelectric transducers mounted in bayonets that are inserted into soft sediment along the JRSO-defined y-axis and/or z-axis. Report includes P-wave velocity in y and/or z direction, bayonet separation, traveltime between transducers, and first arrival picks.
IODP Expedition 355 Core drilling summary
Report includes detailed drilling data for each core: pump(s) used, mud pumped, strokes, shear pins/pressure, bit size/rotation, weight on bit, top drive torque, rate of penetration, core jams, winch and wirelines, core catcher/shoe and barrel, and whether core orientation, drillover, formation temperature, tracers, liners were used.
IODP Expedition 355 Color reflectance
Color reflectance data were measured on section halves using an integration sphere and a UV-VIS spectrophotometer mounted on the Section Half Multisensor Logger (SHMSL). Spectral counts are recorded in the range of 380 to 700 nm, covering the visible spectrum, and binned in ~2 nm bins. Spectral data are reduced from spectra and recorded in tristimulus XYZ values, CieLAB L*a*b* values, and other units.
IODP Expedition 355 Inorganic carbon (coulometer)
Inorganic carbon (carbonate) is determined by coulometry, which uses a photodetection cell to measure carbon dioxide evolved during sample acidification. Report includes percent inorganic carbon and calcium carbonate.
IODP Expedition 355 Sample report
Report includes detailed information about samples taken for testing: location/depth, type/form factor, test, request number, and database identifier.
IODP Expedition 355 Interstitial water composite report
This composite report includes data from numerous interstitial water (IW) analyses (e.g., ICP-LIQUIDS and IONCHROM) in a variable set of columns. Each row combines the data from several tests (groups of measurements made on the same sample at the same time) for a particular IW sample. If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate analysis (ALKALINITY, ICP-LIQUIDS, IONCHROM, SALINITY, SPEC, TITRATOR, and potentially others). Major and minor elements were determined by inductively coupled plasma-atomic emission spectrocsopy (ICP-LIQUIDS). Cations and anions were measured by ion chromatography (IONCHROM). Complex ions were measured by colorimetric measurements using a UV-VIS spectrometer (SPEC). Alkalinity and chloride was measured by titration (ALKALINITY and TITRATOR). Dissolved carbon (DC), dissolved inorganic carbon (DIC), and dissolved organic carbon (DOC) were measured by combustion in a total organic carbon (TOC) analyzer. Salinity was measured by refractometer (SALINITY). pH was measured by ion-selective electrode as part of the alkalinity procedure and is reported in the ALKALINITY analysis.
IODP Expedition 355 Section summary
Report includes data for individual core sections: coring/drilling depths and recovery, database identifiers for the whole section and section halves, and number of samples taken from the section before and after splitting.
IODP Expedition 355 Magnetic susceptibility (point or contact system)
Magnetic susceptibility was measured on section halves on the Section Half Multisensor Logger (SHMSL) using a Bartington MS2 meter and either a MS2E or MS2K probe. Because all JRSO cores meet minimum size requirements for these two probes, MSPOINT data are corrected for volume and recorded in SI susceptibility units (x10<sup>-5</sup>).
IODP Expedition 355 Section-half images
Digital section images were taken of the flat face of split cores on the Section Half Imaging Logger (SHIL) using a linescan camera at a resolution of 20 lines/mm (50 micron pixels). Cores were imaged as soon as possible after splitting to minimize color changes that occur through oxidation and drying. The SHIL produces TIF files as well as reduced-size JPG files. The TIF files are not kept online but users may request them from the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a>.
IODP Expedition 355 RGB channels (calculated from core photos)
Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.
IODP Expedition 355 ICP-AES elemental analysis (solids)
Elemental contents in hard rock and sediment samples was measured by inductively coupled plasma - atomic emission spectrocopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.
IODP Expedition 355 ICP-AES elemental analysis (interstitial water)
Elemental concentration in interstitial water samples was measured by inductively coupled plasma - atomic emission spectroscopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.
IODP Expedition 355 Thermal conductivity
Thermal conductivity was measured using the heated needle method in either full-space needle configuration (soft/saturated sediments) or half-space needle configuration (harder materials) of a TeKa Berlin TK-04 thermal conductivity meter. Heat is applied to the sample and then thermal equilibrium is sought. The heating and equilibration curve is reduced to derive the thermal conductivity value. Raw data are stored if a user wishes to do off-line or postexpedition reduction.
IODP Expedition 355 Spectrophotometry
Interstitial water constitutents were measured by UV-VIS spectrometry using colorimetric methods (e.g., ammonium, nitrate, nitrite, phosphate, silica, and sulfide) by an Agilent CARY 100 UV-VIS spectrophotometer.
IODP Expedition 355 Thin section images
Hard rock and sediment thin section images were acquired using either the JRSO-developed Petrographic Image Capture and Archival Tool (PICAT) imager or (rarely) an upright microscope and a digital camera. Sample images are acquired in unpolarized, polarized, and/or cross-polarized light. Image files are presented compressed by hole.
IODP Expedition 355 X-ray diffraction (XRD)
X-ray diffraction (XRD) is used to identify minerals and their proportions in sediment or hard rock sample powders on a Bruker AXS D4 Endeavor X-ray diffractometer. Results are returned as diffractograms in a viewable format (either PDF or PNG).
IODP Expedition 355 Hole drilling summary
Report includes detailed drilling data: BHA length, bit parameters, and primary depth measurements.
IODP Expedition 355 Hole summary
Report lists hole data: location, water depth, drilling, coring system, and core recovery.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.