Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
355
datasets available to search
ShareScore release 0.9.0
Dataset results
355 results for “radiometer”
GPM SSM/I on F11 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 13 km V07 (GPM_2AGPROFF11SSMI_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
GPM SAPHIR on MT1 (PRPS) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 x 0.25 degree V06 (GPM_3PRPSMT1SAPHIR_CLIM) at GES DISC
The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The Precipitation Retrieval and Profiling Scheme (PRPS)is designed to provide a best estimate of precipitation based upon matched SAPHIR-DPR observations. This fulfils in part the essence of GPM (and its predecessor, TRMM) in which the core observatory acts as a calibrator of precipitation retrievals for the international constellation of passive microwave instruments. In doing so the retrievals from the partner constellation sensors are able to provide greater temporal sampling and great spatial coverage than is possible from the DPR instrument alone. However, the limitations of the DPR instrument are transferred through the retrieval scheme to the resulting precipitation products.Fundamental to the design of the PRPS is the independence from any dynamic ancillary data sets: the retrieval is based solely upon the satellite radiances, a static a priori radiance-rainrate database (and index), and (static) topographical data. Critically, the technique is independent of any model information, unlike the retrievals generated through the Goddard PROFiling (GPROF) scheme: this independence is advantageous when generating products across time scales from near real-time (inaccessibility to modeldata) to climatological scales (circumventing trends in model data).The algorithm is designed to generate instantaneous estimates of precipitation at a constant resolution (regardless of scan position), for all scan positions and scan lines. In addition to the actual precipitation estimate, an assessment of the error is made, and a measure of the ‘fit’ of the observations to the database provided. A quality flag is also provided, with any bad data generating a ‘missing flag’ in the retrieval.
TIROS-4 Medium-Resolution Scanning Radiometer Level 1 Final Meteorological Radiation Data V001 (TIROS4L1FMRT) at GES DISC
TIROS-4 Medium-Resolution Scanning Radiometer Level 1 Final Meteorological Radiation Data (FMRT) product contains radiances expressed in five infrared/visible wavelength regions, expressed in either equivalent blackbody temperature (IR channels 1 and 2) or effective radiant emmitance (visible channels 3 and 5). The data will trace an elliptical, parabolic, or hyperbolic pattern on the ground due to the rotating of the instrument about the satellite spin axis. There is one orbit per file. The data were originally written on IBM 7094 machines, and these have been recovered from magnetic tapes, referred to as the Final Meteorological Radiation Tapes (FMRT). The data are archived in their original IBM 36-bit word proprietary format, also referred to as a binary TAP file.The TIROS-4 satellite was successfully launched on February 8, 1962. The Medium-Resolution Scanning Radiometer experiment successfully returned data for about five months, continuing the measurements made by its predecessors flown on TIROS-2, and -3. A follow-on instrument was flown on TIROS-7. Degradation of the instrument after launch results in a departure of the data from the pre-launch calibration. The instrument is a five channel radiometer with a 55 km footprint at nadir with the following characteristics:Channel 1: 6.0 to 6.5 microns - water vapor absorptionChannel 2: 8.0 to 12.0 microns - atmospheric windowChannel 3: 0.2 to 6.0 microns - reflected solar radiationChannel 4: unused - transmitted redundant time reference signalsChannel 5: 0.55 to 0.75 microns - response to the TV systemThe Principal Investigator for these data was Joseph D. Barksdale from NASA Goddard Space Flight Center. This product was previously available from the NSSDC with the identifier ESAD-00139 (old ID 62-002A-03A).
GPM GMI (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFGPMGMI) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM ATMS on SUOMI-NPP (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFNPPATMS_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07.The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM SSMI on F13 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFF13SSMI_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM AMSU-B on NOAA16 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 16 km V07 (GPM_2AGPROFNOAA16AMSUB) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19)+ MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty
GPM ATMS on SUOMI-NPP (GPROF) Radiometer Precipitation Profiling L2 1.5 hours 16 km V07 (GPM_2AGPROFNPPATMS_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19)+ MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
GPM AMSUB on NOAA17 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFNOAA17AMSUB_DAY_CLIM) at GES DISC
The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GRIP HURRICANE IMAGING RADIOMETER (HIRAD) V0
The GRIP Hurricane Imaging Radiometer (HIRAD) dataset was collected by the HIRAD instrument, which is a hurricane imaging, single-polarization passive C-band radiometer with both cross-track and along-track resolution that measures strong ocean surface winds through heavy rain from an aircraft or space-based platform. Its swath width is approximately 60 degrees in either direction. V0 data contains brightness temperature measurements taken at a 5 GHz frequency. Rain rate and wind speed files for Hurricane Earl have been added to the collection. HIRAD data was collected for storms Earl and Karl during the Genesis and Rapid Intensification Processes (GRIP) experiment from September 1, 2010 through September 16, 2010. The major goal was to better understandhow tropical storms form and develop into major hurricanes. NASA used the DC-8 aircraft, the WB-57 aircraft and the Global Hawk Unmanned AirborneSystem (UAS), configuredwith a suite of in situ and remote sensing instruments that were used to observe and characterize the lifecycle of hurricanes.
GPM SSMIS on F17 (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFF17SSMIS) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
GPM SSM/I on F13 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 12 km V07 (GPM_2AGPROFF13SSMI_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
GHRSST Level 3U Global Subskin Sea Surface Temperature from the Advanced Scanning Microwave Radiometer - Earth Observing System (AMSR-E) on the NASA Aqua Satellite
The Advanced Microwave Scanning Radiometer (AMSR-E) was launched on 4 May 2002, aboard NASA's Aqua spacecraft. The National Space Development Agency of Japan (NASDA) provided AMSR-E to NASA as an indispensable part of Aqua's global hydrology mission. Over the oceans, AMSR-E is measuring a number of important geophysical parameters, including sea surface temperature (SST), wind speed, atmospheric water vapor, cloud water, and rain rate. A key feature of AMSR-E is its capability to see through clouds, thereby providing an uninterrupted view of global SST and surface wind fields. Remote Sensing Systems (RSS, or REMSS) is the provider of these SST data for the Group for High Resolution Sea Surface Temperature (GHRSST) Project, performs a detailed processing of AMSR-E instrument data in two stages. The first stage produces a near-real-time (NRT) product (identified by "_rt_" within the file name) which is made as available as soon as possible. This is generally within 3 hours of when the data are recorded. Although suitable for many timely uses the NRT products are not intended to be archive quality. "Final" data (currently identified by "v7" within the file name) are processed when RSS receives the atmospheric model National Center for Environmental Prediction (NCEP) Final Analysis (FNL) Operational Global Analysis. The NCEP wind directions are particularly useful for retrieving more accurate SSTs and wind speeds. This dataset adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications.
GHRSST Level 3U Global Subskin Sea Surface Temperature version7.0.1a from the WindSat Polarimetric Radiometer on the Coriolis satellite
The WindSat Polarimetric Radiometer, launched on January 6, 2003 aboard the Department of Defense Coriolis satellite, was designed to measure the ocean surface wind vector from space. It developed by the Naval Research Laboratory (NRL) Remote Sensing Division and the Naval Center for Space Technology for the U.S. Navy and the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Integrated Program Office (IPO). In addition to wind speed and direction, the instrument can also measure sea surface temperature, soil moisture, ice and snow characteristics, water vapor, cloud liquid water, and rain rate. Unlike previous radiometers, the WindSat sensor takes observations during both the forward and aft looking scans. This makes the WindSat geometry of the earth view swath quite different and significantly more complicated to work with than the other passive microwave sensors. The Remote Sensing Systems (RSS, or REMSS) WindSat products are the only dataset available that uses both the fore and aft look directions. By using both directions, a wider swath and more complicated swath geometry is obtained. RSS providers of these SST data for the Group for High Resolution Sea Surface Temperature (GHRSST) Project, performs a detailed processing of WindSat instrument data in two stages. The first stage produces a near-real-time (NRT) product (identified by "rt" within the file name) which is made as available as soon as possible. This is generally within 3 hours of when the data are recorded. Although suitable for many timely uses the NRT products are not intended to be archive quality. "Final" data (currently identified by "v7.0.1a" within the file name) are processed when RSS receives the atmospheric mode NCEP FNL analysis. The NCEP wind directions are particularly useful for retrieving more accurate SSTs and wind speeds. The final "v7.0.1a" products will continue to accumulate new swaths (half orbits) until the maps are full, generally within 7 days. The version with letter "a" refers to the file incompliance with GHRSST format.
GPM GMI (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFGPMGMI_DAY_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
SWOT Level 2 Radiometer Brightness Temperatures and Troposphere Interim Data Product Version D
The SWOT Level 2 Radiometer Brightness Temperatures and Troposphere Interim Geophysical Data Record (IGDR) Version D dataset produced by the Surface Water and Ocean Topography (SWOT) mission provides atmospheric water vapor and liquid water content from the Advanced Microwave Radiometer (AMR), a Jason-class radiometer that measures sea surface brightness temperatures at three microwave frequencies (18.7, 23.8 and 34 GHz). Brightness temperatures are processed to estimate the wet troposphere content, atmospheric attenuation to backscatter, cloud liquid water, water vapor content, and wind speed coincident with each range measurement from the nadir altimeter and applied to correct for altimeter range delays caused by atmospheric effects. SWOT is a joint mission between NASA and CNES that launched on December 16, 2022. It aims to measure ocean surface topography with unprecedented resolution and accuracy, as well as map inland water bodies globally.The interim radiometer dataset consists of discrete measurements along two tracks located approximately 30-km to the left and right of the satellite nadir. The data were processed using the Medium-accuracy (preliminary) Orbit Ephemeris (MOE) with preliminary calibrations applied. They are distributed as one file per half-orbit in netCDF4 file format with a nominal latency of < 1.5 days.
GHRSST Level 3C North Atlantic Regional Subskin Sea Surface Temperature from the Advanced Very High Resolution Radiometer (AVHRR) on NOAA-19 (GDS2 version)
A Group for High Resolution Sea Surface Temperature (GHRSST) dataset for the North Atlantic Region (NAR) from the Advanced Very High Resolution Radiometer (AVHRR) on the NOAA-19 platform (launched 6 Feb 2009). This particular dataset is produced by the European Organization for the Exploitation of Meteorological Satellites (EUMETSAT), Ocean and Sea Ice Satellite Application Facility (OSI SAF) in France. The AVHRR is a space-borne scanning sensor on the National Oceanic and Atmospheric Administration (NOAA) family of Polar Orbiting Environmental Satellites (POES) having a operational legacy that traces back to the Television Infrared Observation Satellite-N (TIROS-N) launched in 1978. AVHRR instruments measure the radiance of the Earth in 5 (or 6) relatively wide spectral bands. The first two are centered around the red (0.6 micrometer) and near-infrared (0.9 micrometer) regions, the third one is located around 3.5 micrometer, and the last two sample the emitted thermal radiation, around 11 and 12 micrometers, respectively. The legacy 5 band instrument is known as AVHRR/2 while the more recent version, the AVHRR/3 (first carried on the NOAA-15 platform), acquires data in a 6th channel located at 1.6 micrometer. Typically the 11 and 12 micron channels are used to derive sea surface temperature (SST) sometimes in combination with the 3.5 micron channel. The highest ground resolution that can be obtained from the current AVHRR instruments is 1.1 km at nadir. The NOAA-19 platform is sun synchronous generally viewing the same earth location twice a day (latitude dependent) due to the relatively large AVHRR swath of approximately 2400 km. The NAR products are SST fields derived from 1km AVHRR data that are re-mapped onto a 0.02 degree equal angle grid. In the processing chain, global AVHRR level 1b data are acquired at Centre de Meteorologie Spatiale (CMS) through the EUMETSAT/EUMETCAST system. A cloud mask is applied and SST is retrieved from the AVHRR infrared (IR) channels by using a multispectral technique. This dataset adheres to the GHRSST Data Processing Specification (GDS) version 2 format specifications.
CAMEX-3 POLARIMETRIC SCANNING RADIOMETER (PSR) V1
The Polarimetric Scanning Radiometer (PSR) is a versatile airborne microwave imaging radiometer developed by the Georgia Institute of Technology and the NOAA Environmental Technology Laboratory for the purpose of obtaining polarimetric microwave emission imagery of the Earth's oceans, land, ice, clouds, and precipitation.
GPM AMSR-2 on GCOM-W1 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFGCOMW1AMSR2_CLIM) at GES DISC
Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.
CAMEX-3 ER-2 Millimeter-wave Imaging Radiometer (MIR)
The CAMEX-3 ER-2 Millimeter-wave Imaging Radiometer (MIR) dataset is a browse-only dataset containing plots of brightness temperature measurements collected by the Millimeter-wave Imaging Radiometer (MIR) in support of the third field campaign in the Convection And Moisture EXperiment (CAMEX) series, CAMEX-3. This field campaign took place from August to September 1998 based out of Patrick Air Force Base in Florida, with the purpose of studying various aspects of tropical cyclones in the region. During CAMEX-3, MIR operated onboard the NASA ER-2 high-altitude research aircraft, collecting brightness temperature measurements of water vapor, clouds, precipitation, and other atmospheric features. The MIR browse image files are available from August 8 through September 8, 1998 in GIF format.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.