Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
365
datasets available to search
ShareScore release 0.9.0
Dataset results
365 results for “simulation study”
Simulation to optimize the laboratory diagnosis of bacteremia: event times dataset from observational and retrospective studies
<h1>Introduction</h1> <p>Dataset consisting of three .csv files generated from observational and retrospective data analysis for the manuscript titled: Simulation to optimize the laboratory diagnosis of bacteremia, by Gerada et al. Dataset consists of event time-stamps for blood cultures. All identifiers have been stripped. </p> <h1>Dataset summary</h1> <ul> <li>observational_data.csv – time-stamps generated from direct observation of blood culture processing. Note that data is in wide format, so that column names contain the event name. Also, events are not related to a particular specimen, therefore, column lengths are not equal. </li> <li>retrospecitve_audit.csv – time-stamps generated from manualk retrospective audit of laboratory information system. Column `Lab` indicates the incubator. Rows are per specimen. </li> <li>retrospective_data.csv – time-stamps pulled automatically from laboratory information system (without manual curation). Rows are per specimen.</li> </ul>
DS1. Simulation transmission studies of assessing transmission performance of VCSEL-based transmitters across various temperatures and fiber lengths_SPRINTER_v1.0
<p>The dataset consists of simulated waveforms and eye diagrams captured at both transmitter (Tx) and receiver (Rx) ends, aiming to assess transmission performance across various operational temperatures of the VCSEL-based Tx (25, 55, and 85 °C). For each temperature, two scenarios of RF electrical inputs were examined, corresponding to peak-to-peak voltages of 0.4 and 0.8 V for 50 GBaud OOK-NRZ signals. Following this, the transmission performance was examined across fiber lengths of 500 m and 1 km for both RF cases, as well as in the scenario where the Tx-end was directly connected to the Rx-end (Back-to-back, B2B). The data collection focused on capturing simulated data at four critical stages of the transmission: a) during the generation of the RF 50 GBaud OOK-NRZ signals, b) at the VCSEL output, c) at the photodiode (PD) input, and d) during the reception of the electrical signal at the Rx-end. The operational temperature factor was also considered when applying the transfer function in the VCSEL component of the Tx. The devices that impose the bandwidth limitations and are investigated in these simulations, were: the laser driver, VCSEL (also affected by operational temperature and RF input voltage swing), PD, and transimpedance amplifier (TIA). </p>
How Binding Site Flexibility Promotes RNA Scanning in TbRGG2 RRM: A Molecular Dynamics Simulation Study
<p>The data necessary to independently reproduce the MD simulations and the first part of the simulation trajectories reported in the paper "<strong>How Binding Site Flexibility Promotes RNA Scanning in TbRGG2 RRM: A Molecular Dynamics Simulation Study</strong>", by Lemmens et al.</p> <p>Due to Zenodo data deposition limits, every 10th frame of the MD simulation trajectories is included. Due to Zenodo deposition limits, MD trajectory files for this paper are also available at 10.5281/zenodo.14260246.</p>
Accompanying simulated data for "Go multivariate: a Monte Carlo study of a multilevel hidden Markov model with categorical data of varying complexity"
<p>The multilevel hidden Markov model (MHMM) is a promising vehicle to investigate latent dynamics over time in social and behavioral processes. By including continuous individual random effects, the model accommodates variability between individuals, providing individual-specific trajectories and facilitating the study of individual differences. However, the performance of the MHMM has not been sufficiently explored. Currently, there are no practical guidelines on the sample size needed to obtain reliable estimates related to categorical data characteristics We performed an extensive simulation to assess the effect of the number of dependent variables (1-4), the number of individuals (5-90), and the number of observations per individual (100-1600) on the estimation performance of group-level parameters and between-individual variability on a Bayesian MHMM with categorical data of various levels of complexity. We found that using multivariate data generally alleviates the sample size needed and improves the stability of the results. Regarding the estimation of group-level parameters, the number of individuals and observations largely compensate for each other. Meanwhile, only the former drives the estimation of between-individual variability. We conclude with guidelines on the sample size necessary based on the complexity of the data and the study objectives of the practitioners.</p> <p>This repository contains data generated for the manuscript: "Go multivariate: a Monte Carlo study of a multilevel hidden Markov model with categorical data of varying complexity". It comprehends: (1) model outputs (maximum a posteriori estimates) for each repetition (n=100) of each scenario (n=324) of the main simulation, (2) complete model outputs (including estimates for 4000 MCMC iterations) for two chains of each repetition (n=3) of each scenario (n=324). Please note that the empirical data used in the manuscript is not available as part of this repository. A subsample of the data used in the empirical example are openly available as an example data set in the R package <a href="https://cran.r-project.org/web/packages/mHMMbayes/index.html">mHMMbayes on CRAN</a>. The full data set is available on request from the authors.</p>
Idealized Planar Array study for Quantifying Spatial heterogeneity (IPAQS) - Numerical Simulations
<p>The Idealized Planar Array study for Quantifying Spatial heterogeneity (IPAQS) is the result of a National Science Foundation (US) funded project, that aims at studying the effect of surface thermal heterogeneities of different length-scale on the atmospheric boundary layer. This project consisted of a computational effort (dataset here included), and an experimental effort (dataset being prepared for publication). </p> <p><strong>Overview of the numerical (Large Eddy) simulations:</strong></p> <p>The simulations are separated into two sets to study the differences between heterogeneous and homogeneous surfaces. In the first set, a total of seven configurations are considered, all with a homogeneous surface temperature fixed at a value of <span class="math-tex">\(T_s\)</span> = 290 K, and for which the geostrophic wind speed has been increased from 1 to 15 m s<sup>-1</sup> (i.e., U<sub>g</sub> = 1, 2, 3, 4, 6, 9, 15 m s<sup>−1</sup> ). These homogeneous cases are referred to as Homog-X, where X indicates the geostrophic wind speed corresponding case (see Margairaz et al. 2020a). In the second set, the surface temperature is distributed amongst square patches, where the temperature of each patch is determined by sampling a Gaussian distribution with a mean temperature of 290 K and a standard deviation of 5 K. In this case, three different patch sizes were considered (i.e., l<sub>h</sub> = 800, 400, and 200 m). The sizes of the heterogeneities were chosen to be of similar size (l<sub>h</sub> /l<sub>d</sub> ≈ 1), half the size (l<sub>h</sub> /l<sub>d</sub> ≈ 1/2), and about a quarter of the size (l<sub>h</sub> /l<sub>d</sub> ≈ 1/4) of the largest flow motions within the represented thermal boundary layer, assuming that this is of the order of the boundary-layer height (l<sub>d</sub> ∼ z <sub>i</sub> ). These heterogeneities are typically not resolved in NWP models. These cases have been studied for the same geostrophic wind speeds indicated above, and hereafter are referred to as PYYY-X-, where X indicates the corresponding geostrophic wind speed, and YYY refers to the size of the patches (e.g., P800_Ug1_ would be the heterogeneous case with patches of 800 m, and forced with Ug = 1 m s<sup>−1</sup> ). Additionally, for the case with larger patches, three different random distributions of the patches were considered to evaluate the potential effect of a given surface distribution for all geostrophic wind speeds. In this dataset we only include case v3. The LES imposed surface temperature distributions emulate the surface thermal conditions observed in Morrison et al. (2017 QJRMS, 2021 BLM, 2022 BLM), where measurements of the surface temperature were taken with a thermal camera at the SLTEST site of the US Army Dugway Proving Ground in Utah, USA. This is an ideal site with uniform roughness and a large unperturbed fetch, where surface thermal heterogeneities are naturally created by differences in surface salinity. In all studied cases, the surface roughness is assumed homogeneous, with z<sub>0</sub> = 0.1 m, and representative of a surface with sparse forest or farmland with many hedges (Brutsaert 1982; Stull 1988). The initial boundary-layer height is set to z<sub>i</sub> = 1000 m. The temperature profile is initialized with a mean air temperature of 285 K. At the top of the initial boundary layer, a capping inversion of 1000 m is used to limit its growth. The strength of this inversion is fixed at Γ = 0.012 K m<sup>−1</sup>. The atmospheric boundary layer (ABL) is considered dry and the latent heat flux is neglected in all cases. Further, in all simulations, the surface heat flux is computed using MOST, as explained in Margairaz et al. 2020a, where the surface temperature is kept constant in time throughout the simulations. Thus, there is no feedback from the atmosphere to the surface as the surface temperature does not cool down or warm up with local changes in velocities. As a consequence, the ABL gradually warms up as the simulations progress, and hence becomes less convective over time. However, the runs are not long enough for this to be significant. In addition, to ensure a degree of homogeneity within each patch and a certain degree of validity of MOST, note that even for the heterogeneous cases with the fewest amount of grid points per patch, a minimum of eight grid points is granted in each horizontal direction. The domain size is set to (L<sub>x</sub>, L<sub>y</sub>, L<sub>z</sub>) = (2π, 2π, 2) km at a grid size of (Nx , Ny , Nz ) = (256, 256, 256) resulting in a horizontal resolution of <span class="math-tex">\(\Delta\)</span>x = <span class="math-tex">\(\Delta\)</span>y = 24.5 m and a vertical grid spacing of <span class="math-tex">\(\Delta\)</span>z = 7.8 m. A timestep of <span class="math-tex">\(\Delta\)</span>t = 0.1 s is used to ensure the stability of the time integration. The two sets of simulations span a large range of geostrophic forcing conditions, allowing the study of the effect on the structure of the convective boundary layer (CBL) above a patchy surface compared to a homogeneous surface. The procedure used to spin up the simulations is the following: a spinup phase of four hours of real time is used to achieve converged turbulent statistics, which is then followed by an evaluation phase. During the latter, running averages are computed for the next hour of real time (dataset here published). Statistics have been computed for averaging times of 5 min to 1 h, showing statistical convergence at 30-min averages with negligible changes between the 30-min and the 60-min averages. The simulations cover a wide range of atmospheric stability regimes ranging from −z<sub>i</sub>/L < 5 to −z<sub>i</sub>/L > 700, and hence spanning from near neutral to highly convective scenarios.</p> <p><strong>Description of the Dataset as included in the NetCDF files:</strong></p> <p>Data for each study case is included in two files, one for momentum related variables, and one for temperature related variables. For example, the following files "P200_Ug1_Momentum.nc" and "P200_Ug1_Scalar.nc", include the 1h averaged variables for momentum and temperature for the case of 200 m surface patches with 1 m/s geostrophic winds. </p> <p>Each corresponding momentum file "PXXX_UgX_Momentum.nc" includes the following variables in a Python Xarray structure:</p> <ul> <li>'avgU' = mean streamwise wind speed; 'avgV' = mean spanwise wind speed; 'avgW' = mean vertical wind speed, 'avgP' = mean dynamic modified pressure field (<span class="math-tex">\(p^*\)</span>, see Margairaz et al 2020a),</li> <li>'avgU2', 'avgV2', 'avgW2' = correspond to <span class="math-tex">\(\overline{UU}\)</span>, <span class="math-tex">\(\overline{VV}\)</span>, and <span class="math-tex">\(\overline{WW}\)</span>, where the capital indicates the LES filtered variable.</li> <li>'avgUV', 'avgUW', 'avgVW' = correspond to <span class="math-tex">\(\overline{UV}\)</span>, <span class="math-tex">\(\overline{UW}\)</span>, and <span class="math-tex">\(\overline{VW}\)</span>. These variables together with the ones above are used to compute the Reynolds stress components (e.g. <span class="math-tex">\(R_{xz} = \overline{U}\overline{W} - \overline{UW}\)</span>).</li> <li>avgU3', 'avgV3', 'avgW3', 'avgU4', 'avgV4', 'avgW4' = correspond to the equivalent but instead of squared they are cubed and to the 4th power.</li> <li>'avgtxx','avgtyy','avgtzz','avgtxy','avgtxz','avgtyz' = These represent the corresponding averaged subgrid scale (SGS) stress.</li> <li>'avgdudz','avgdvdz','avgNut','avgCs' = Represent the averaged vertical derivatives, an averaged subgrid Nusselt number, and the Cs coefficient computed in the SGS model.</li> </ul> <p>Overall, there are a total of 26 variables related to the momentum field. Alternatively, the temperature fields are included in the "PXXX_UgX_Scalar.nc" files. These files include 10 variables, </p> <ul> <li>'avgT' = mean Temperature field, 'avgT2' = corresponds to <span class="math-tex">\(\overline{TT}\)</span>, 'avgUT' = correspond to <span class="math-tex">\(\overline{UT}\)</span>, 'avgVT' = correspond to <span class="math-tex">\(\overline{VT}\)</span>, 'avgWT' = correspond to <span class="math-tex">\(\overline{WT}\)</span>; one can use these terms to compute the corresponding Reynolds averaged turbulent fluxes as is the case for momentum. </li> <li>'avgUT_sgs','avgVT_sgs','avgWT_sgs' = These represent the corresponding subgrid scale fluxes.</li> <li>'avg_nus', avg_ds' = averaged subgrid Nusselt number, and the Ds coefficient computed in the scalar SGS model.</li> </ul> <p>All variables output from the LES are normalized by Tscale = 290 [K] when it includes dimensions of temperature, u_scale = 0.45 [m/s], when it relates to velocity fields, and z<sub>i</sub> = 1000 [m] for length scales.</p> <p>The only output variables that are expressed in dimensional form are those for the surface temperature included in the files "SurfTemp_DXXX.nc"</p> <p>Together with the data files we include a Python script that loads the data and includes it in two Xarray structures that one can then use to work with the datasets. </p>
Data of curvature model for the study of nanoparticle size effects on amyloid fibril stability and molecular dynamics simulations data
<p>The data provided refer to our published article:</p> <p>T. John, J. Adler, C. Elsner, J. Petzold, M. Krueger, L.L. Martin, D. Huster, H.J. Risselada, B. Abel, Mechanistic insights into the size-dependent effects of nanoparticles on inhibiting and accelerating amyloid fibril formation, J. Colloid Interface Sci. 622 (2022), 804–818. <a href="https://doi.org/10.1016/j.jcis.2022.04.134">https://doi.org/10.1016/j.jcis.2022.04.134</a></p> <p>This article is accompanied by a 'Data in Brief' article that explains in more detail the use of the curvature model and our molecular dynamics (MD) simulations:</p> <p>T. John, L.L. Martin, H.J. Risselada, B. Abel, Curvature model for nanoparticle size effects on peptide fibril stability and molecular dynamics simulation data, Data Brief 45 (2022), 108598. <a href="https://doi.org/10.1016/j.dib.2022.108598">https://doi.org/10.1016/j.dib.2022.108598</a></p>
Simulation file for "Titanium dioxide and silver nanoparticles air emissions risk assessment for spray coating processes in Witek, Italy – A case study"
<p>Underlying data for “Nanosized titanium dioxide particle emission potential from a commercial indoor air purifier photocatalytic surface – A case study”</p>
Simulation results for ProSSE and datafile for case study
<p>This repository includes the data files for the simulation study and the case study in the publication.</p> <p>The simulation_result.Rdata is an R data file that stores simulated data and results. The data is used to generate Figures 2-7, S1, and S2.</p> <p>The casestudy_trees.Rdata is an R data file that stores the posterior samples of the species tree of the Australian rainbow skinks and the model fitting on these trees. The data file is used to generate Figure 8.</p>
A dynamical view of protein-protein complexes: studies by molecular dynamics simulations
<p>All-atom MD simulations generated for the manuscript "A dynamical view of protein-protein complexes: studies by molecular dynamics simulations". Eight binary protein-protein complexes from the Docking benchmark and the Affinity benchmark are studied in this work: 2OOB (an ubiquitin/ubiquitin ligase complex), 1AY7 (a ribonuclease Sa/barstar complex), 1BRS (a barnase/barstar complex), 3SGB (a proteinase B/inhibitor), 1EMV (a colicin/immunity protein complex), 1PVH (complex between Interleukine 6 receptor and leukemia inhibitory factor), 1GCQ (Vav/GRB2 SH3 domains complex) and 1AK4 (cyclophilin/HIV capsid complex)</p> <p>Each folder for a binary complex is organised as followed:</p> <p>- in <strong>A</strong> and <strong>B</strong> there are the dry MD simulations for the unbound proteins</p> <p>- in <strong>complex</strong> there are two folders (<strong>without_water</strong> and <strong>water</strong>) where the dry simulation and the simulation with water molecules are provided</p>
Divide-and-conquer approach to study protein tunnels in long molecular dynamics simulations
<p># *"Divide-and-conquer approach to study protein tunnels in long molecular dynamics simulations"*</p> <p>The input files and data used for the paper *"Divide-and-conquer approach to study protein tunnels in long molecular dynamics simulations"* are separated in the different folders depending stage they belong to.</p> <p>## Folders</p> <p> 1. **01_inputs:** The MD trajectory of DhaA used (only protein atoms present)<br> 2. **02_sliced_trajectory:** The CAVER3 results for the sliced trajectory (eight parts)<br> 3. **03_sliced_filtered:** Filtered CAVER3 results and results from the divide-and-conquer approach<br> 4. **04_full_trajectory:** The CAVER3 results for the full trajectory analysis<br> 5. **05_guided_example:** Guided example for the divide-and-conquer approach<br> </p>
Supplementary material 1 from: Pontoppidan M, Nachman G (2013) Changes in behavioural responses to infrastructure affect local and regional connectivity – a simulation study on pond breeding amphibians. Nature Conservation 5: 13-28. https://doi.org/10.3897/natureconservation.5.4611
Full model description following the ODD-template suggested by Grimm et al. (2006, 2010) and model parameterisation. (doi: 10.3897/natureconservation.5.4611.app). File format: Adobe PDF document (pdf).:
Data for "Numerical simulation study of the evolution of lightning channel decay and reactivation processes" by Zheng et al.
<p>All data of the manuscript "Numerical simulation study of the evolution of lightning channel decay and reactivation processes" submitted to Journal of Geophysical Research: Atmospheres.</p> <p>The data supports the manuscript entitled "Numerical simulation study of the evolution of lightning channel decay and reactivation processes”. Microsoft Notepad can open the *.txt files and the *.DAT files, they contain the channel information of two intracloud flashes (IC1 and IC2) and the channel elctrical parameters at different channel segments. </p> <p>The data can be used freely for scientific purposes with the appropriate citation. </p>
Data and codes from "Daniel et al. What can optimized cost distances based on genetic distances offer? A simulation study on the use and misuse of ResistanceGA"
<p><span>Data and codes used for </span><span>“Daniel et al. What can optimized cost distances based on genetic distances offer? A simulation study on the use and misuse of ResistanceGA”</span></p>
Physics-based Simulations of 3D Wave Propagation - Case study deriving from the Le Teil earthquake
<p>This dataset contains 4,000 simulation results of the 3D elastic wave equation in a setting deriving from the Le Teil earthquake (France, 2019). The elastic wave equation governs the propagation of waves in a 3D propagation medium. Two types of data are given in this dataset: a materials dataset and a velocity dataset.</p> <h2>Materials dataset</h2> <p>Each material describes the propagation domain used for one numerical simulation. It is built from non-stationary random fields added to the reference 1D velocity profile and corresponds to the velocity of shear waves. The minimum value is 1500m/s and the maximum is 4500m/s. All materials contain a 1800m-thick bottom layer with a constant velocity of 4500m/s. </p> <p>All materials are 3D arrays of shape 32 x 32 x 32.They correspond to a physical size of 9.6 x 9.6 x 9.6km³. </p> <h3>Practical use</h3> <p>Materials are provided as `.npy` arrays, readable with python: `a = np.load(‘materials0-1999.npy’)`<br>Each file contains 2000 materials. Therefore, `a` is of shape (2000, 32, 32, 32). Indices correspond to the material index, the x coordinate (from West to East), the y coordinate (from South to North), and the z coordinate (from bottom to top). </p> <h2>Velocity dataset</h2> <p>The velocity dataset contains the velocity wavefields simulated at the surface of each propagation domain. They have been generated by solving the 3D elastic wave equation with the high-performance computing code SEM3D based on the Spectral Element Method (https://github.com/sem3d/SEM). To each material described above corresponds one velocity field, obtained by the propagation of waves through this material.</p> <p>Velocity fields were recorded by a grid of 16 x 16 virtual sensors located at the surface of the propagation domain between 150m and 450m (600m between consecutive sensors). Each sensor records the 3-component velocity with a 100Hz sampling between 0s and 20s. </p> <p>Computational details: The computational mesh was designed with elements of size 300m and 7 Gauss-Lobato-Legendre quadrature points. It can accurately represent the propagation of waves up to 5Hz frequency. Waves were generated by a point-wise source placed at the bottom of the domain, inside the constant layer (the position of the source is 4800, 4800, -8400m). The seismic source derives from the Le Teil earthquake [Delouis et al., 2021, doi:10.5802/crgeos.78]. The seismic source is described by a moment tensor with fixed orientation (strike = 48°, dip = 45°, and rake = 88°) and amplitude (moment magnitude M0=2.47 · 10^16 N.m).</p> <h3>Practical use</h3> <p>Results are given in .feather dataframes, readable with pandas library in Python: v = pd.read_feather(‘velocity0-99.feather’). Each dataframe contains 100 simulation results. Each row of the dataframe has the following format: </p> <table> <tbody> <tr> <td>run</td> <td>field</td> <td>x</td> <td>y</td> <td>z</td> <td>0.0</td> <td>0.01</td> <td>0.02</td> <td>...</td> <td>19.98</td> <td>19.99</td> </tr> <tr> <td>12</td> <td>Veloc E</td> <td> <p>150.0</p> </td> <td>770.0</td> <td>-1.0</td> <td>0</td> <td>0</td> <td>0</td> <td>...</td> <td>1.1e-5</td> <td>1.0e-5</td> </tr> <tr> <td>12</td> <td>Veloc N</td> <td> <p>150.0</p> </td> <td>770.0</td> <td>-1.0</td> <td>0</td> <td>0</td> <td>0</td> <td>...</td> <td>3e-6</td> <td>3e-6</td> </tr> <tr> <td>12</td> <td>Veloc Z</td> <td> <p>150.0</p> </td> <td>770.0</td> <td>-1.0</td> <td>0</td> <td>0</td> <td>0</td> <td>...</td> <td>-2.6e-5</td> <td>-2.7e-5</td> </tr> <tr> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> <td>...</td> </tr> </tbody> </table> <p>where `run` indicates the index of the material used in this simulation, `field` indicates the component of the velocity field (`Veloc E` for East-West, `Veloc N` for North-South, `Veloc Z` for Vertical). `x`, `y`, `z` are the coordinates of the sensor (in meters). The next 2000 columns contain the velocity field for times 0, 0.01, …, 19.99.</p> <h1>Related work</h1> <p>This dataset was used to fine-tune a Factorized Fourier Neural Operator (F-FNO, Lehmann et al. 2024, doi:10.1016/j.cma.2023.116718) to predict ground motion wavefields from 3D geologies. The code to train the F-FNO is available at https://github.com/lehmannfa/HEMEW3D</p>
Rain gauge data used in the study "Characteristics of Precipitation and Mesoscale Convective Systems over the Peruvian Central Andes in Multi 5-Year Convection-Permitting Simulations"
<p>The rain gauge data in Peru and Brazil used in the study,</p> <p>Yongjie Huang, Ming Xue, Xiao-Ming Hu, et al. Characteristics of Precipitation and Mesoscale Convective Systems over the Peruvian Central Andes in Multi 5-Year Convection-Permitting Simulations. <em>ESS Open Archive .</em> November 14, 2023.<br><span>DOI: <a href="https://doi.org/10.22541/essoar.170000370.07634797/v1" target="_blank" rel="noopener noreferrer">10.22541/essoar.170000370.07634797/v1</a></span></p> <p><span>The original data source:</span></p> <ul> <li>The rain gauge data in Peru are available at <a href="https://piscoprec.github.io/webPISCO/en/raingauges">https://piscoprec.github.io/webPISCO/en/raingauges</a> (last access: 18 July 2021).</li> <li>The rain gauge data in Brazil are available at <a href="https://bdmep.inmet.gov.br">https://bdmep.inmet.gov.br</a> (last access: 19 January 2023).</li> </ul>
Simulated exome-sequencing data for a family study of lymphoid cancer
<p>This repository contains all the data files for a simulated exome-sequencing study of 150 families, ascertained to contain at least four members affected with lymphoid cancer. Please note that previous versions of this repository omitted a key file linking the genotypes of individuals to their family and individual IDs; this file, geno_key.txt, is now included. All other files remain the same as in previous versions.</p> <p>The simulated data can be found in the files section below. The files are:</p> <ol> <li>SLiM_output.txt - contains the SLiM-simulated, exome-wide, SNV data generated under an American-admixture demographic model, for the American-admixed sub-population only.</li> <li>SLiM_output_chr8&9.txt - contains the SLiM-simulated data above for all source populations as well as the American-admixed sub-population, but only for chromosomes 8 and 9.</li> <li>sample_info.txt - contains pedigree information of all the disease-affected individuals and individuals connecting them along a line of descent, for all 150 ascertained pedigrees.</li> <li>Genotypes.zip - a zipfile that contains 22 text files of genotypes for each chromosome. The genotypes are for simulated single-nucleotide variants on the exome and are in gene-dosage format. </li> <li>geno_key.txt – a plain-text file that links the genotyped individuals to their family and individual IDs.</li> <li>SNVmaps.zip - a zipfile that contains 22 text files giving the single-nucleotide variant information for each chromosome. </li> <li>familial_cRV.txt - contains the familial causal rare variants for all 150 ascertained pedigrees.</li> <li>study_peds.txt - contains the 150 pedigrees ascertained to contain four or more relatives affected with lymphoid cancer.</li> <li>PLINKfiles.zip - a zipfile that contains PLINK .fam, .bim and .bed files for all 22 of the chromosomes.</li> </ol> <p>All the scripts used to generate these data can be found in the GitHub repository archived at <a href="../records/12694914">https://zenodo.org/records/12694914</a></p> <p>We have also uploaded one intermediate .Rdata file, Chromwide.Rdata, to save the user substantial time when running the associated RMarkdown script for the simulation. We recommend loading Chromwide.Rdata into your R work-space rather than generating it from scratch.</p>
Figure 9. Experimental Page Rank dependency on Markov Chain length with balanced distribution-Study of a Random Navigation on the Web Using Software Simulation
<p>This paper explored different implementation choices for analyzing the most important<br> parameters about a web. Many researchers explored the use of new search engines for studying the<br> evolution of the web (Ntoulas, Cho and Olston, 2004). Another important research is realized about<br> the Link Structure Graph (LSG). The LSG captures a complete hyperlink structure from the web<br> and models link associations reflected in the page layout (Rodrigues, Milic-Frayling and Fortuna,<br> 2007). For further works ideas like extrapolation methods for accelerating page rank calculation can<br> be developed (Kamvar et al., 2003).</p>
Figure 7. Experimental Page Rank dependency on Markov Chain length-Study of a Random Navigation on the Web Using Software Simulation
<p>The next diagram proves that the values for Experimental Page Rank depend on the length<br> of the Markov Chain, while Algorithmic Page Rank remains constant.</p>
Figure 6. Outlinks degree distribution for all web sites-Study of a Random Navigation on the Web Using Software Simulation
<p>Some of the most important aspects of the analysis is obtaining the parameters which can<br> give the main information about a web. In the simulation implementation information as: page,<br> number of inlinks, number of outlinks, value for Algorithmic Page Rank and Experimental Page<br> Rank will be processed for obtaining the results of the analysis. For the first part it was necessary to<br> use experimental values as: inlinks, outlinks and in and out frequencies.</p>
Figure 1. Markov Chain Model&Figure 2. Transition matrix-Study of a Random Navigation on the Web Using Software Simulation
<p>For a good simulation it is very important to find methods for<br> navigating through the web (Levene and Wheeldon, 2004). John Kemeny and Laurie Snell have<br> proposed the use of Markov models for web simulations (Kemeny and Snell, 1960). Cadez et al. (2000)<br> used Markov models for classifying the sessions into different categories for browsers. Some other<br> proposed techniques choose to combine different order Markov models for obtaining low state<br> complexity and improving accuracy, as Deshpande and Karypis (2004). Dongshan and Junyi (2002)<br> used for predicting the access providing good scalability and high coverage a hybrid-order tree-like<br> Markov model. As an alternative to the Markov model Pitkow proposed a longest subsequence model<br> (Pitkow and Pirolli, 1999), also for predicting the next page accessed by the user Sarukkai chose<br> Markov models (Sarukkai, 2000).<br> Transitions are simulated using the Markov Chain nodes, Google matrix and an arbitrary initial<br> probability distribution. Examples can be seen in Figure 1 and Figure 2.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.