Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,293
datasets available to search
ShareScore release 0.9.0
Dataset results
2,293 results for “mean”
Data & Code for Peak water levels rise less than mean sea level in tidal channels subject to depth convergence by deepening
<p>Data & Code for the article: "Peak water levels rise less than mean sea level in tidal channels subject to depth convergence by deepening"</p> <p>- Input-files used to run the models</p> <p>- Scripts used for the figures</p> <p>- Excel-based tool to calculate tidal response to channel deepening with system-specific parameters</p> <p>- ...</p>
FIRST PRINCIPLE DESIGN LOAD ESTIMATION FOR LH2 FUEL TANKS BY MEANS OF 0D APPROACH - OMAE Data Set
<p>Supplementary data set for the OMAE publication "FIRST PRINCIPLE DESIGN LOAD ESTIMATION FOR LH2 FUEL TANKS BY MEANS OF 0D APPROACH". Contains the complete set of data for the presented cases while only selected data series are shown in the paper.</p>
Exploratory investigation of historical decorative laminates by means of vibrational spectroscopic techniques
<p>This dataset contains the data used for the publication entitled "Exploratory investigation of historical decorative laminates by means of vibrational spectroscopic techniques".</p>
Primary collected data for modelling the additive MAR/R process by means of the PBF-LB process based on the example of tool steel 1.2709 powder
<p>For the evaluation of a MAR/R process, not only process-, material- and demonstrator-specific correlations and data must be combined. In addition to secondary data (e.g. databases, publications, etc.), primary data (e.g. process times, volume flows, etc.) must also be collected for the specific application.</p> <p>The attached table shows the primary data to be collected for the cradle-to-gate process depending on the process phases and steps. This data is used as support for ecological as well as economic process and component evaluations.</p>
75-kyr paired mean summer temperature (MST) and moisture balance (BIT-index) data for eastern equatorial Africa based on GDGT distributions in the DeepCHALLA sediment sequence
<p>The DeepCHALLA (DCH) GDGT-based climate proxy data series consist of paired measurements on 373 discrete 2-cm-thick sediment samples, represented by their DCH event-free depth in meter (mefd). Section depth center refers to the distance (in cm) of the sample’s center from the top of the individual core section as represented by its DCH core code. Sediment age is based on the age model as presented in Fig. 2 in Baxter et al. (2023). Mean Summer Temperature (MST) was calculated from the distribution of sedimentary brGDGTs according to Pearson et al. (2011) and rescaled using an ensemble reconstruction for eastern Africa covering the last 25 ka (Extended Data Fig. 4 in Baxter et al., 2023). The branched versus isoprenoid tetraether (BIT) index of sedimentary brGDGTs from Lake Chala, reflecting lake water-balance variation, was calculated according to Hopmans et al. (2004).</p>
Biotic and abiotic factors controlling spatial variation of mean carbon turnover time in forest soil
<p><strong>Data description</strong></p> <p>This dataset is associated with the paper "Biotic and abiotic factors controlling spatial variation of mean carbon turnover time in forest soil". This dataset includes the soil organic carbon turnover time (τ<sub>soc</sub>) based on radiocarbon signals at the global and regional scales.</p> <p><strong>Global synthesis</strong></p> <p>The analysis of global soil radiocarbon data was done using the International Soil Radiocarbon Database (ISRaD v.1.0; Lawrence et al., 2020). ISRaD is an open source data with the records of 8 biomes (<em>i.e.,</em> forest, grassland, cropland, shrubland, savanna, tundra, permafrost, and others). Since we focus on the turnover time of SOC (τ<sub>soc</sub>) based on radiocarbon occurring in the natural forest ecosystem, so we limited our study to data from soil depth within 200 cm in the forest ecosystem. We built a database of radiocarbon-based soil turnover time (τ<sub>soc</sub>) of 1897 soil samples from 245 forest locations worldwide. It covers a wide geographical range (35.65 <sup>o</sup>S ‒ 68.8 <sup>o</sup>N; 159.64 °W – 173.57 °E) and a broad nature climate zone (-5.2 <sup>o</sup>C to 40.0<sup> o</sup>C; 58.66 mm to 6900 mm) over the half a century (1958 – 2017). Where forest age is missing, we derived it from The global forest age dataset (GFAD v 1.0; Poulter et al., 2018). The GFAD database represents the distribution of forest stand age during 2000 – 2010 years.</p> <p><strong>Regional analysis</strong></p> <p><strong> Soil sampling in forests across the Eastern Asian Monsoon region</strong></p> <p>We sampled soils from twelve permanent forest plots in five mountains in the Eastern Asian Monsoon region (Table 1, Figure 1, and S1). Five of the twelve forest plots are members of the Smithsonian Forest Global Earth Observatory network (ForestGEO, https://forestgeo.si.edu/; Anderson-Teixeira et al., 2018; Chu et al., 2019). The other seven forest plots are members of China's National Ecosystem Research Network (CNERN, http://www.cern.ac.cn). In the Eastern Asian Monsoon region, more than half of the total annual rainfall occurs in the summer season (<em>i.e.</em>, June, July, and August) (Tardif et al., 2020; Tian et al., 2003). We estimated the τ<sub>soc</sub> by the radiocarbon dating analysis of up to 100 cm of soil depth in each forest plot. For each plot, we separated the whole soil increment into the surface (0 – 30 cm) and deep (30 – 100 cm) layers to test the radiocarbon signal due to the high financial cost. Details of the location, climate, and vegetation for each sampling site are provided in Table 1 and Supplementary Text 1.</p> <p>Nine soil cores (2.5 cm in diameter) were collected in each forest plot, and a depth of 10 cm separated each soil column from 0 to 100 cm. In total, 108 soil profiles were sampled across the 12 forest plots. The accumulated aboveground litter was collected and measured in an area of 50 cm × 50 cm in each forest plot, with three replicates adjacent to each soil profile. Fine roots (< 2 mm in diameter) were manually picked from soil samples. The litter and root samples were dried at 65 °C for 48 hours using an oven and then weighed for dry mass. The elevation and other geographic information of each forest plot were measured during the soil sampling. </p>
WBGT Daily Maximum, Mean, Minimum 1979-2021 (Brimicombe WBGT method, from hourly ERA5 data)
<p>Wet Bulb Globe Temperature, or WBGT, calculated using the method of Brimicombe (GeoHealth: https://doi.org/10.1029/2022GH000701). Using Python Xarray, daily statistics (mean, max, min) from hourly WBGT data were saved. WBGT calculated from hourly ERA5 data (near-surface, single level variables: t2m, d2m, 10m u+v wind vectors, mrt) Jan 1 1979 to Dec 31 2021. Daily statistics are saved in Netcdf (nc) files in annual slices, then annual files are saved in ~5 to 20 year groups within the zip files.</p> <p>Methodology from Brimicombe et al., 2023 (GeoHealth: https://doi.org/10.1029/2022GH000701), using the Thermofeel Python package shared by the ECMWF team on on <a href="https://https://github.com/ecmwf-projects/thermofeel/blob/master/thermofeel/thermofeel.py">Github</a>.</p>
Data of "A micromechanical Mean-Field Homogenization surrogate for the stochastic multiscale analysis of composite materials failure"
<p><strong>Id</strong><br>title = "A micromechanical Mean-Field Homogenization surrogate for the stochastic multiscale analysis of composite materials failure"<br>journal = International Journal for Numerical Methods in Engineering<br>year = 2023<br>volume = 124<br>pages = 5200-5262<br>doi = 10.1002/nme.7344<br>authors = "Calleja, Juan Manuel and Wu Ling, and Nguyen, Van-Dung and Noels, Ludovic"</p> <p>If you use these data or model, we would be grateful if you could cite this above paper</p> <p><strong>Software</strong><br>Requires GMSH and Python 3 with packages numpy, matplotlib, sklearn (scikit-learn), os, pickle, scipy, pandas, cvs, math, seaborn.<br>Each folder contains readme that will help the user to navigate through the data.</p> <p>To run the model you need the open source code <a href="http://gitlab.onelab.info/cm3/cm3Libraries">https://gitlab.onelab.info/cm3/cm3Libraries </a>but you need to request access to cm3MFH as well</p> <p><strong>Directories</strong></p> <ol> <li>Main: Contains fast and easy access to the plots presented in the paper. The readme contained in this plot specifies the plots that are run with each code.</li> <li>1_SVE_Generator:Contains the files needed for the generation of the SVE, the statistical properties of the microstructure, and PLY samples for the full-field simulations, as well as the used samples</li> <li>2_Full_Field: contains the extracted data from the FF composite realizations, as well as the used random SVE geometries.</li> <li>3_Identification: Contains the identification code to find the effective parameters for each SVE realization as well as the obtained identification results.</li> <li>4_Generator: Contains the generated set of parameters for the 25 and 45 micrometer squared SVEs as well as the codes for the new data generation, the file with the generated data and the plots related with the MF-ROM random parameters and their cross-relations shown in Sections 2.5.2, 3.2.3 and 4.</li> <li>5_Tests: Contains all the information concerning the tests used for the verification of the MF-ROM and the ply and experimental compression results.</li> <li>MFH_vs_FF: Allows to easily test the inverse identification process through the use of random SVEs and verify the performance of the identified MFH parameters against its full-field counterpart.</li> </ol> <p><strong>Plot of figures</strong></p> <p>Figure 9 : Run "python plot_Gc.py" which can be found in folder Main/Full_Field_Energy<br>Figure 10: Run "python3 PDF_HIST_Gc.py", which can be found in folder Main/Histograms<br>Figure 23: Run "python3 plot.py" which can be found in folder Main/MFH_FF_Comparison<br>Figure 24: Run "python3 plot.py" which can be found in folder Main/MFH_FF_Comparison<br>Figure 27: Run "python3 Correlation_Graphs_25.py contained in folder Main/Distributions_25_Micrometer_SVE<br>Figure 29: Run "python3 PDF_HIST.py" which can be found in folder Main/Histograms<br>Figure 30: To obtain the data used in this figure, run "python3 DistanceCorrelation_25.py" which can be found in folder /4_Generator<br>Figure 31: To obtain the data used in this figure, run "python3 DistanceCorrelation_45.py" which can be found in folder /4_Generator<br>Figure 32: Run "python3 Correlation_Graphs_25.py" which can be found in folder Main/Distributions_25_Micrometer_SVE<br>Figure 33: Run "python3 Correlation_Graphs_25.py" which can be found in folder Main/Distributions_25_Micrometer_SVE<br>Figure 34: Run "python3 Correlation_Graphs_25.py" which can be found in folder Main/Distributions_25_Micrometer_SVE<br>Figure 36: Run "python3 plot_New.py" which can be found in folder Main/PlyTests<br>Figure 46: Run "python3 plot_Test.py" which can be found in folder Main/CompressionExperiment<br>Figure B3: Run "python3 MicroStrAna.py" which can be found in folder Main/MicroStructStatistics<br>Figure B4: Run "python3 MicroStrAna.py" which can be found in folder Main/MicroStructStatistics<br>Figure D5: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D6: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D7: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D8: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D9: Run "python3 PDF_HIST_B.py" which can be found n folder Main/Histograms<br>Figure D10: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D11: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D12: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D13: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure D14: Run "python3 PDF_HIST_B.py" which can be found in folder Main/Histograms<br>Figure E15: Run "python3 Correlation_Graphs_45.py" which can be found in folder Main/Distributions_45_Micrometer_SVE<br>Figure E16: Run "python3 Correlation_Graphs_45.py" which can be found in folder Main/Distributions_45_Micrometer_SVE<br>Figure E17: Run "python3 Correlation_Graphs_45.py" which can be found in folder Main/Distributions_45_Micrometer_SVE<br>Figure F18: Run "python3 plot_Convergence_25.py" which can be found in folder Main/Convergence<br>Figure F19: Run "python3 plot_Convergence_45.py" which can be found in folder Main/Convergence<br> </p> <p> </p> <p> </p> <p> </p>
Memory kernel extraction and mean first-passage time for fast-folding proteins (Q - trajectories)
<p>Fraction of native contacts reaction coordinate (Q) trajectories for the 8 proteins that appear in the Dalton et. al. PNAS 2023. For the original all-atom data from which the Q(t) were calculated, contact the group of David E. Shaw at Shaw Research (see the paper - K. Lindorff-Larsen, S. Piana, R. O. Dror, D. E. Shaw, How fast-folding proteins fold. Science 334, 517–520 (2011))</p> <p>Data contains:<br> - Q(t) trajectories for 8 proteins <br> - Corresponding free energy profiles<br> <br> Example analysis codes (written in C++) are included for:<br> - Free energy calculation<br> - Mean first-passage times<br> - Velocity-velocity correlation function and position-force correlation function calculations, needed for memory kernel extraction<br> - Memory kernel extraction (see Ayaz et. al. PNAS 2021)</p>
Experimental determination of differential scattering coefficients for nickel by means of linearly polarized x-ray radiation
<p>This data set contains the experimental results of differential scattering coefficients for nickel as determined in the publication "Experimental determination of differential scattering coefficients for nickel by means of linearly polarized X-ray radiation".</p>
Experimental Protocol on Creative Engagement and Meaning Creation in Interactive Experiences for Cultural Heritage. Participants Reinterpretations
<p>The following document contains the material produced for the testing of the "caring prototype" <em>MyTISSE</em>, an interactive user experience on Matisse's painting <em>Bathers by a rive</em>r (Art Institute of Chicago). Focusing on the change of the pigments made by the artist during the gestation of this canvas, the UX exploits creative engagement to catalyze meaning creation processes.</p> <p>This pubblication contains the images of participants' reinterpretations. All the participants agreed to the reuse and sharing of these data for academic purposes, filling in an <em>ad hoc </em>privacy form.</p>
Mean-field theories are simple for neural quantum states
<p>Data used in the figures of the paper to appear under the title "Mean-field theories are simple for neural quantum states". All the data is written in csv files.</p>
Potential of Mean Force (PMFs) for Zerovalent Aluminium (100-110-111) NanoParticles
<p>The dataset encompasses the potential of mean force data concerning three distinct fcc configurations of zero valent aluminum nanoparticles: (100), (110), and (111), in interaction with side-chain analogs of 22 diverse amino acids, which constitute the basic building blocks of proteins. The calculations employed the adaptive Well-Tempered Metadynamics method, a well-established technique previously utilized for assessing biomolecule adsorption on materials like Fe, TiO2 and Ag. To conduct these simulations, we utilized the GROMACS and PLUMED software packages, while the construction of the aluminium slabs was accomplished with the CHARMM-GUI/Nanomaterial Modeler. In the metadynamics biased simulation, the Surface Separation Distance (SSD) served as the primary reaction coordinate. This SSD quantifies the minimum separation between the center-of-mass (COM) of the side-chain analog (SCA) molecule and the surface atoms (ri) along the z-coordinate.</p>
Testing Means to Scale Early Childhood Development Interventions in Rural Kenya
ClinicalTrials.gov study NCT03548558. IPD Sharing: Not stated. Countries: 1. Publications: 4.
Meaning-Centered Psychotherapy at Home
ClinicalTrials.gov study NCT05495737. IPD Sharing: YES. Countries: 1. Publications: 1.
A Study to Assess the Effect of Exenatide Treatment on Mean 24-Hour Heart Rate in Patients With Type 2 Diabetes
ClinicalTrials.gov study NCT00516074. IPD Sharing: Not stated. Countries: 2. Publications: 1.
Exploiting Pathogenic Tp53 Mutation for Early Diagnosis of Ovarian Cancer by Mean of Papanicolau Test
ClinicalTrials.gov study NCT04812938. IPD Sharing: YES. Countries: 1. Publications: 18.
Eye-Control Trial: Wearable Eye-Tracking Device as Means of Communication
ClinicalTrials.gov study NCT04582149. IPD Sharing: YES. Countries: 1. Publications: 1.
A Study of Meaning-Centered Psychotherapy for Caregivers to People With Cancer
ClinicalTrials.gov study NCT06307535. IPD Sharing: YES. Countries: 1. Publications: 0.
Training Grammar With Meaning
ClinicalTrials.gov study NCT06250101. IPD Sharing: NO. Countries: 1. Publications: 4.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.