Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,155
datasets available to search
ShareScore release 0.9.0
Dataset results
5,155 results for “resolution”
ICON Michelson Interferometer for Global High-resolution Thermospheric Imaging Viewing Direction A Temperature
MIGHTI samples the O2 A band spectral region at five different wavelengths in order to both measure the shape of the band and to specify a background radiance that is subtracted from the signal. The wavelengths of the filter passbands are selected to maximize the sensitivity to lower thermospheric temperature variations. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. Two filter channels sample either end of the band to define a background (754.1 nm and 780.1 nm) and three more sample its shape (760.0 nm, 762.8 nm and 765.2 nm). Using three filters that sample the band shape allows the simultaneous retrieval of the atmospheric temperature and common shifts in the center wavelengths of the pass bands due to thermal drifts of the filters. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere.
IRAS MEDIUM RESOLUTION ZODIACAL HISTORY FILE V1.0
The IRAS Medium-Resolution (2 arcminute in-scan) Zodiacal Observational History File (ZOHF) consists of the time-ordered IRAS survey data averaged into 2' X 1/2 degree rectangular pixels along with pointing and timing information, covering the entire mission.
Interball Tail Wide-range 3D Ion Spectrometer (CORALL) Linearly Interpolated 60 s Resolution data in GSE Coordinates
Interball-1 Wide-range 3D Ion Spectrometer (CORALL) linearly interpolated to have the measurements on the minute at 60 s resolution data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Geotail Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates
Geotail linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Geotail Linearly Interpolated 60 s Resolution Coordinates Comprehensive Plasma Instrumentation (CPI) data in GSE
Geotail linearly interpolated to have the measurements on the minute at 60 s resolution CPI data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Measurements taken off Cornwallis Island off Resolute
Measurements taken off Cornwallis Island off Resolute in the mid to late 90s.
VG2 LECP 0.4S HIGH RESOLUTION SATURN NEAR ENCOUNTER DATA
This near encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 1 while the spacecraft was within the very close vicinity of Saturn. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. During Saturn near encounter, the LEMPA (Low Energy Magnetospheric Particle Analyzer) subsystem was turned on for data collection. Particles include low energy electrons, protons, alpha particles, medium energy protons and ions, high energy and intensity protons, electrons, alpha particles, and Z >= nuclei. The near encounter data are 0.4 second rate measurements within 1/8 of the LECP instrumental motor rotation period (the angular scanning periods, or step period).
ACE SWEPAM Solar Wind Weimer Propagated 60 s Resolution Data in GSM Coordinates
ACE Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution SWEPAM data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
VIIRS/JPSS2 Moderate Resolution 6 Min L1B Swath 750 m
The VIIRS/JPSS2 Moderate Resolution 6-Min L1B Swath 750m, short-name VJ202MOD is the Joint Polar-orbiting Satellite System-2 (JPSS-2/NOAA-21; referred to hereafter as J2) platform-derived NASA Visible Infrared Imaging Radiometer Suite (VIIRS) L1B calibrated radiances product that comprise sixteen moderate-resolution or M-bands, which have a spatial resolution of 750-meters at nadir. These M-bands comprise eleven reflective solar bands (RSB) and five thermal emissive bands (TEB). Each of the M-bands has 16 detectors in the along-track direction with 16 rows of pixels per scan that provide a 750-m resolution. Ranging in wavelengths from 0.402 µm to 12.49 µm, the M-bands are sensitive to visible, near-, shortwave-, mediumwave-, and longwave-infrared wavelengths. Derived from the NASA VIIRS L1A raw radiances, this product includes calibrated and geolocated radiance and reflectance data, quality flags, and granule- and collection-level metadata. The J2 VIIRS radiometric calibration Level-1B reprocessing includes a few calibration updates for the reflective solar bands (RSB), but no significant changes for the day-night band (DNB) or thermal emissive bands (TEB). For more information and documentation, visit LAADS product page at: https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/VJ202MOD
ISEE-3 Linearly Interpolated 60 s Resolution Solar Wind Plasma data in GSM Coordinates
ISEE-3 linearly interpolated to have the measurements on the minute at 60 s resolution solar wind plasma data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
VG2 LECP 0.4S HIGH RESOLUTION NEPTUNE FAR ENCOUNTER DATA
This far encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 2 while the spacecraft was within the vicinity of Neptune. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. Particles include electrons, protons, alpha particles, and light, medium, and heavy nuclei particles. The far encounter data are 0.4 second rate measurements within 1/8 of the LECP instrumental motor rotation period (the angular scanning periods, or step period).
Sentinel-3B OLCI Level-2 Regional Earth-observation Full Resolution (EFR) Ocean Color (OC) - Near Realtime Data, version R2022.0
The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.
Wind Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
Wind Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies. References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405. There are now two version of this data set. An off set has been found in the Wind MFI Bz component that is present after November 2004. Version 2 has this offset removed. Prof. R.L. McPherron determined the correction to be Bz = Bz - (-0.000000130406219.*odoy.*odoy + 0.000576303146.*odoy + 0.679940509 + 0.3215*cos(2*pi*(doy-171)/366)) where doy is the day of the year in units of days and odoy is the days sinces Jan 1, 1999 00:00:00 UT in units of days.
Sentinel-3B OLCI Earth-observation Reduced Resolution (ERR) Data, version 1
The Ocean and Land Colour Instrument (OLCI) is the successor to ENVISAT's Medium Resolution Imaging Spectrometer (MERIS) having additional spectral channels, different camera arrangements and simplified on-board processing. The OLCI is a push-broom instrument with five camera modules sharing the field of view. The field of view of the five cameras is arranged in a fan-shaped configuration in the vertical plane, perpendicular to the platform velocity. Each camera has an individual field of view of 14.2° and a 0.6° overlap with its neighbors. The whole field of view is shifted across track by 12.6 degrees away from the sun to minimize the impact of sun glint. OLCI is equipped with on-board calibration hardware based on sun diffusers. There are three sun diffusers--two 'white' diffusers dedicated to radiometric calibration and one dedicated to spectral calibration, with spectral reflectance features. The native resolution is approximately 300m, referred to as Full Resolution(FR). A Reduced Resolution (RR) processing mode provides Level-1B data at sampling rates decreased by a factor of four in both spatial dimensions resulting to resolution of approximately 1.2 km.
Wind Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
Wind linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind. There are now two version of this data set. An off set has been found in the Wind MFI Bz component that is present after November 2004. Version 2 has this offset removed. Prof. R.L. McPherron determined the correction to be Bz = Bz - (-0.000000130406219.*odoy.*odoy + 0.000576303146.*odoy + 0.679940509 + 0.3215*cos(2*pi*(doy-171)/366)) where doy is the day of the year in units of days and odoy is the days sinces Jan 1, 1999 00:00:00 UT in units of days.
SMAP Level 1C High Resolution Radar Sigma Naught Swath Grid Product (Version 2)
SMAP Level 1C Sigma Naught High Res Product Version 2
Geotail Low Energy Particle (LEP) experiment data Weimer Propagated 60 s Resolution in GSE Coordinates
Geotail LEP Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
MEaSUREs Calibrated Enhanced-Resolution Passive Microwave Daily EASE-Grid 2.0 Brightness Temperature ESDR V001
This data set, part of the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) program, is an improved, enhanced-resolution, gridded passive microwave Earth System Data Record (ESDR) for monitoring cryospheric and hydrologic time series from SMMR, SSM/I-SSMIS, and AMSR-E. It is derived from the most mature and available Level-2 satellite passive microwave records from 1978 through the present.
SMAP Level 1B Low Resolution Radar Sigma Naught Time Order Product (Version 2)
SMAP Level 1B Sigma Naught Low Res Product Version 2
RENU2 COrnell Wire BOom Yo-yo (COWBOY) Electric Field, High Time Resolution (H0), 1 ms Data
Rocket Experiment for Neutral Upwelling 2, RENU2, COrnell Wire BOom Yo-yo, COWBOY, Electric Field Measurements
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.