Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

5,155

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

5,155 results for “resolution”

Learn how ShareScore rates datasets ↗
nasa20/100

ISEE-3 Linearly Interpolated 60 s Resolution Solar Wind Plasma data in GSE Coordinates

ISEE-3 linearly interpolated to have the measurements on the minute at 60 s resolution solar wind plasma data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedApr 2025View details →
nasa20/100

Moderate Resolution Imaging Spectroradiometer (MODIS) - Terra

This dataset represents multiple products archived at the multiple archive centers for the MODIS (Moderate Resolution Imaging Spectroradiometer) instrument aboard the Terra Satellite. This dataset is provided by NASA EOSDIS as a single point of entry for this suite of products. The provided access URL is link to EOSDIS's Earthdata Search tool with a pre-populated query that will bring up all products archived by EOSDIS with imagery provided by the MODIS instrument on Aqua.

restrictednotspecifiedMar 2025View details →
nasa20/100

MGS MARS/MOONS MAG/ER PRE-MAP MAG FULL WORD RESOLUTION V1.0

This data set contains vector magnetic field data acquired by the Fluxgate section of the Magnetometer / Electron Reflectometer instrument aboard the Mars Global Surveyor (MGS) spacecraft. The data are provided at a variable time resolution depending on the telemetry rate available to the investigation for the time period beginning with Aerobraking Phase 1A (1997-09-12). The data in the dataset cover the entire premapping period (ends 1999-03-08).

restrictedus-pdMar 2025View details →
nasa20/100

Geotail Linearly Interpolated 60 s Resolution Coordinates Comprehensive Plasma Instrumentation (CPI) data in GSM

Geotail linearly interpolated to have the measurements on the minute at 60 s resolution CPI data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedAug 2025View details →
nasa20/100

MRO MARS HIGH RESOLUTION IMAGING SCIENCE EXPERIMENT DTM V1.0

This dataset includes derived Digital Terrain Models and their corresponding orthoimages from the HiRISE instrument on MRO.

restrictedus-pdApr 2025View details →
nasa20/100

Multi-Resolution Land Characteristics

The Multi-Resolution Land Characteristics (MRLC) project was established to provide multi-resolution land cover data of the conterminous United States from local to regional scales. A major component of MRLC is an objective to develop a national 30-meter land cover characteristics data base using Landsat thematic mapper (TM) data. This is a cooperative effort among six programs within four U.S. Government agencies, including the U.S. Environmental Protection Agency's (EPA) Environmental Monitoring and Assessment Program; the U.S. Geological Survey's (USGS) National Water Quality Assessment Program; the National Biological Service's Gap Analysis Program; the USGS' Earth Resources Observation Systems (EROS) Center; the National Oceanic and Atmospheric Administration's Coastal Change Analysis Program; and the EPA's North American Landscape Characterization project. Multitemporal scenes were selected for the eastern deciduous forests, agricultural regions, and selected other regions. Multitemporal pairs were selected to be in consecutive seasons (in 1992 when possible). All scenes were previewed for image quality. The participating agencies organized the joint purchase of a single national set of Landsat TM scenes. In addition, the cooperators developed a common definition for preprocessing the satellite data. The shared, consistently processed TM data are the foundation for the development of the national 30-meter land cover data base. The jointly acquired data are archived and distributed by EROS. A variety of products are available to MRLC participants, to their affiliated users, and to the general public. Multi-Resolution Land Characterization 2001 (MRLC 2001) At-Sensor Reflectance Dataset is a second-generation federal consortium to create an updated pool of nation-wide Landsat imagery, and derive a second-generation National Land Cover Database (NLCD 2001). The MRLC 2001 data cover the United States, including Alaska and Hawaii. Multi-temporal scenes may also be available, depending on the location. Most of the images are of high quality, and cloud cover is generally less than ten percent. The data will also include a 30-meter Digital Elevation Model (DEM) for all scenes that do not include the Canadian or Mexican borders.

restrictednotspecifiedMar 2025View details →
nasa20/100

MGS MARS MAG PRE-MAP DETAIL WORD RESOLUTION V1.0

This data set contains vector magnetic field data acquired by the Fluxgate section of the Magnetometer / Electron Reflectometer instrument aboard the Mars Global Surveyor (MGS) spacecraft. The data are provided at a variable time resolution depending on the telemetry rate available to the investigation for the time period beginning with Aerobraking Phase 1A (1997-09-12). The data in the dataset cover the entire premapping period (ends 1999-03-08).

restrictedus-pdMar 2025View details →
nasa20/100

ACE Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

ACE Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
nasa20/100

ICON Michelson Interferometer for Global High-resolution Thermospheric Imaging viewing direction B

The MIGHTI instrument measures the horizontal wind speed and direction (the wind vector). Each MIGHTI unit measures the wind along its line of sight. MIGHTI uses two perpendicular fields of view nominally pointing 45 degrees and 135 degrees in azimuth from the spacecraft velocity (MIGHTI A and MIGHTI B). Combining data from both units, this 90 degrees separation between their views allows the wind vector to be determined. For the wind measurements MIGHTI observes the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa20/100

Sentinel-3B OLCI Level-3M Global Mapped Earth-observation Reduced-Resolution (ERR) Inherent Optical Properties (IOP), Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →
nasa20/100

ISEE-3 Solar Wind Plasma Weimer Propagated 60 s Resolution in GSM Coordinates

ISEE-3 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution solar wind plasma data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedApr 2025View details →
nasa20/100

Geotail Weimer Propagated using LEP 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

Geotail Weimer propagated solar wind data using LEP and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies. References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
nasa20/100

ISEE-3 Solar Wind Plasma Weimer Propagated 60 s Resolution in GSE Coordinates

ISEE-3 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution solar wind plasma data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedApr 2025View details →
nasa20/100

Nimbus High Resolution Infrared Radiometer Remapped Digital Data Daily L3, HDF5 V001

This data set (NmHRIR3H) consists of daily, global composites of High Resolution Infrared Radiometer (HRIR) data obtained by the Nimbus 1, Nimbus 2, and Nimbus 3 satellites during 1964, 1966, and 1969. Each composite is provided as a set of three HDF5-formatted files: separate North and South Polar projections in the 10 km Equal-Area Scalable Earth Grid (EASE-Grid) and an equatorial projection in a 20 km equidistant grid for the region between 60 N and 60 S. Browse images are also available.

restrictednotspecifiedMar 2025View details →
nasa20/100

Geotail Weimer Propagated using CPI 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

Geotail Weimer propagated solar wind data using CPI and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
nasa20/100

Geotail Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates

Geotail linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedAug 2025View details →
nasa20/100

Cluster-Samba Wideband Data (WBD) Plasma Wave Receiver/High Time Resolution Waveform Data

The following description applies to the Wideband Data (WBD) Plasma Wave Receivers on all four Cluster satellites, each satellite being uniquely identified by its number (1 through 4) or its given name (Rumba, Salsa, Samba, Tango, respectively). High time resolution calibrated waveform data sampled in one of 3 frequency bands in the range 0-577 kHz along one axis using either an electric field antenna or a magnetic search coil sensor. The dataset also includes instrument mode, data quality and the angles required to orient the measurement with respect to the magnetic field and to the GSE coordinate system. The AC electric field data are obtained by using one of the two 88m spin plane electric field antennas of the EFW (Electric Fields and Waves) instrument as a sensor. The AC magnetic field data are obtained by using one of the two search coil magnetometers (one in the spin plane, the other along the spin axis) of the STAFF (Spatio-Temporal Analysis of Field Fluctuations) instrument as a sensor. The WBD data are obtained in one of three filter bandwidth modes: (1) 9.5 kHz, (2) 19 kHz, or (3) 77 kHz. The minimum frequency of each of these three frequency bands can be shifted up (converted) from the default 0 kHz base frequency by 125.454, 250.908 or 501.816 kHz. The time resolution of the data shown in the plots is determined from the WBD instrument mode. The highest time resolution data (generally the 77 kHz bandwidth mode) are sampled at 4.6 microseconds in the time domain (~4.7 milliseconds in the frequency domain using a standard 1024 point FFT). The lowest time resolution data (generally the 9.5 kHz bandwidth mode) are sampled at 36.5 microseconds in the time domain (~37.3 milliseconds in the frequency domain using a standard 1024 point FFT). The availability of these files depends on times of DSN and Panska Ves ground station telemetry downlinks. A list of the status of the WBD instrument on each spacecraft, the telemetry time spans, operating modes and other details are available under Science Data Availability on the University of Iowa Cluster WBD web site at http://www- pw.physics.uiowa.edu/cluster/ and through the documentation section of the Cluster Science Archive (CSA) (https://www.cosmos.esa.int/web/csa/documentation). Details on Cluster WBD Interpretation Issues and Caveats can be found at http://www- pw.physics.uiowa.edu/cluster/ by clicking on the links next to the Caution symbol in the listing on the left side of the web site. These documents are also available from the Documentation section of the CAA website. For further details on the Cluster WBD data products see Pickett, J.S., et al., "Cluster Wideband Data Products in the Cluster Active Archive" in The Cluster Active Archive, 2010, Springer-Verlag, pp 169-183, and the Cluster WBD User Guide archived at the CAA website in the Documentation section. ... CALIBRATION: ... The procedure used in computing the calibrated Electric Field and Magnetic Field values found in this file can be obtained from the Cluster WBD Calibration Report archived at the CSA website in the Documentation section. Because the calibration was applied in the time domain using simple equations the raw counts actually measured by the WBD instrument can be obtained by using these equations and solving for 'Raw Counts', keeping in mind that this number is an Integer ranging from 0 to 255. Since DC offset is a real number, the resultant when solving for raw counts will need to be converted to the nearest whole number. A sample IDL routine for reverse calibrating to obtain 'Raw Counts' is provided in the WBD Calibration Report archived at the CSA. ... CONVERSION TO FREQUENCY DOMAIN: ... In order to convert the WBD data to the frequency domain via an FFT, the following steps need to be carried out: 1) If Electric Field, first divide calibrated data values by 1000 to get V/m; 2) Apply window of preference, if any (such as Hann, etc.); 3) Divide data values by sqrt(2) to get back to the rms domain; 4) perform FFT (see Bandwidth variable notes for non-continuous modes and/or the WBD User Guide archived at the CAA); 5) divide by the noise bandwidth, which is equal to the sampling frequency divided by the FFT size (see table below for appropriate sampling frequency); 6) multiply by the appropriate constant for the window used, if any. These steps are more fully explained in the WBD Calibration Report archived at the CSA.... +--------------------------+ Bandwidth Sample Rate ----------- -------------- 9.5 kHz 27.443 kHz 19 kHz 54.886 kHz 77 kHz 219.544 kHz +--------------------------+ COORDINATE SYSTEM USED: ... One axis measurements made in the Antenna Coordinate System, i.e., if electric field measurement, it will either be Ey or Ez, both of which are in the spin plane of the spacecraft, and if magnetic field measurement, it will either be Bx, along the spin axis, or By, in spin plane. The user of WBD data should refer to the WBD User Guide, archived at the CSA, Section 5.4.1

restrictednotspecifiedApr 2025View details →
nasa20/100

Geotail Linearly Interpolated 60 s Resolution Low Energy Particle (LEP) experiment data in GSM Coordinates

Geotail linearly interpolated to have the measurements on the minute at 60 s resolution LEP data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedAug 2025View details →
nasa20/100

VG2 LECP 0.4S HIGH RESOLUTION JUPITER FAR ENCOUNTER DATA

This far encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 2 while the spacecraft was within the vicinity of Jupiter. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. Particles include electrons, protons, alpha particles, and light, medium, and heavy nuclei particles.

restrictedus-pdApr 2025View details →
nasa20/100

Sentinel-3A OLCI Level-3B Global Binned Earth-observation Reduced-Resolution (ERR) Inherent Optical Properties (IOP), Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.