Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

5,155

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

5,155 results for “resolution”

Learn how ShareScore rates datasets ↗
nasa20/100

FAST Fluxgate Magnetometer High-Resolution 7.8125 ms Data

Calibrated Fluxgate Data acquired by the Fast Auroral SnapshoT Small Explorer, FAST, Magnetometer Instrument. Data have been calibrated, despun, and detrended against the International Geomagnetic Reference Field, IGRF, using IGRF Coefficients for the Date of Acquisition. Data are provided in several Coordinate Systems. Non detrended Data in Spacecraft and Geocentric Equatorial Inertial Coordinates are provided. Ephemeris Data are also provided.

restrictednotspecifiedApr 2025View details →
nasa20/100

ICON Michelson Interferometer for Global High-resolution Thermospheric Imaging viewing direction A

The MIGHTI instrument measures the horizontal wind speed and direction (the wind vector). Each MIGHTI unit measures the wind along its line of sight. MIGHTI uses two perpendicular fields of view nominally pointing 45 degrees and 135 degrees in azimuth from the spacecraft velocity (MIGHTI A and MIGHTI B). Combining data from both units, this 90 degrees separation between their views allows the wind vector to be determined. For the wind measurements MIGHTI observes the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa20/100

Geotail Weimer Propagated using LEP 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates

Geotail Weimer propagated solar wind data using LEP and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies. References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
nasa20/100

Sentinel-3B OLCI Level-3M Global Mapped Earth-observation Reduced Resolution (ERR) Chlorophyll (CHL) - Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →
nasa20/100

PSP FIELDS Fluxgate Magnetometer (MAG) Magnetic Field Vectors, Spacecraft, SC, Coordinates, Full Resolution, Level 2 (L2), 3.413 ms Data

Parker Solar Probe FIELDS Instrument Suite Fluxgate Magnetometer, MAG, Data: The time resolution of the MAG time series data varies with instrument mode ranging from 2.289 samples/s to 292.9 samples/s. These two data sampling rates corresponding to 2 samples or 256 samples per 0.874 s where 0.874 s is equal to 2^25 divided 38.4 MHz. See reference [2] for a complete explanation of the MAG instrument sampling methodology. The Magnetometer has four ranges: ±1024 nT, ±4096 nT, ±16,384 nT, and ±65,536 nT. The Magnetometer Range is selected by an algorithm based on the strength of the ambient magnetic field. The magnetic field measurement precision is ±15 bits, based on the 16-bit Analog to Digital Converter, ADC.References:* 1. Fox, N.J., Velli, M.C., Bale, S.D. et al. Space Sci Rev (2016) 204: 7. https://doi.org/10.1007/s11214-015-0211-6* 2. Bale, S.D., Goetz, K., Harvey, P.R. et al. Space Sci Rev (2016) 204: 49. https://doi.org/10.1007/s11214-016-0244-5

restrictednotspecifiedAug 2025View details →
nasa20/100

Goddard High Resolution Spectrograph

GHRS was used to make finely detailed spectroscopic observations of ultraviolet sources, but was removed from HST in February 1997.

restrictednotspecifiedApr 2025View details →
nasa20/100

Wind 3DP Linearly Interpolated 60 s Resolution data in GSM Coordinates

Wind linearly interpolated to have the measurements on the minute at 60 s resolution 3DP data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedAug 2025View details →
nasa20/100

OLCI/Sentinel-3A L1 Full Resolution Top of Atmosphere Reflectance

The OLCI/Sentinel-3A L1 Full Resolution Top of Atmosphere Reflectance product, S3A_OL_1_EFR is generated from the data aquired by the Ocean and Land Colour Instrument (OLCI) on board European Earth Observation satellite mission, SENTINEL-3. The OLCI is a push-broom imaging spectrometer that measures solar radiation reflected by the Earth at a ground spatial resolution of around 300m, over all surfaces, in 21 spectral bands. OLCI is based on the imaging design of ENVISAT's Medium Resolution Imaging Spectrometer (MERIS). It has a 1270km wide swath. For more information about the instrument and the mission, visit "Sentinel Online" at https://sentinel.esa.int/web/sentinel/home. The S3A_OL_1_EFR is a Level-1B product. This is composed of an information package map, called a manifest, 22 measurement data files, and seven annotation data files. The 21 measurement data files (one for each band) consist of Top Of Atmosphere (TOA) radiances, calibrated to geophysical units (W.m-2. sr-1 Micro meter-1), georeferenced onto the Earth's surface, and spatially resampled onto an evenly spaced grid. Seven annotation files provide information on illumination and observation geometry, environment data (meteorological data) and quality and classification flags. Both measurement data files and annotation data files are written in netCDF 4 format. The manifest file is in XML format and contains metadata associated with the instrument and the processing. The S3A_OL_1_EFR is generated in Earth Observation (EO) processing mode and all parameters in this product are provided for each re-gridded pixel on the product image and for each removed pixel. The OL_1_EFR product package is described below: Element name Description Manifest.safe SENTINEL-SAFE product manifest Oa##_radiance.nc Radiance for OLCI acquisition bands 01 to 21 Removed_pixels.nc Removed pixels information needed for Level-1C generation Time_coordinates.nc Time stamp annotations Geo_coordinates.nc High resolution georeferencing data Quality_flags.nc Classification and quality flags Tie_geo_coordinates.nc Low resolution georeferencing data Tie_geometries.nc Sun and view angles Tie_meteo.nc ECMWF meteorology data Instrument_data.nc Instrument data note: Oa## represents all the OLCI channels (Oa1 to Oa21). For more information about the product, read the SENTINEL-3 OLCI User Guide at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci.

restrictednotspecifiedMar 2025View details →
nasa20/100

MRO MARS HIGH RESOLUTION IMAGE SCIENCE EXPERIMENT EDR V1.0

This data set includes the Experimental Data Records from the HiRISE instrument on MRO. These products are the permanent record of the raw images obtained by the HiRISE Instrument and contain the properties of unprocessed and unrectified imaging maintaining the original spacecraft viewing orientation and optical distortion properties. .

restrictedus-pdMar 2025View details →
nasa20/100

VLA 74-MHz Deep High-Resolution Survey Source Catalog

This table contains some of the results from a 74-MHz survey of a 165 deg<sup>2</sup> region located near the North Galactic Pole (NGP). This survey has an unprecedented combination of both spatial resolution (25" FWHM) and sensitivity (1-sigma as low as 24mJy/beam). The authors detect 949 sources at the 5-sigma level in this region, enough to begin exploring the nature of the 74-MHz source population. In their paper, they present differential source counts, spectral index measurements, and the size distribution as determined from counterparts in the high-resolution FIRST 1.4-GHz survey. They find a trend of steeper spectral indices for the brighter sources. Further, there is a clear correlation between spectral index and median source size, with the flat-spectrum sources being much smaller on average. Ultra-steep spectrum objects (power-law index alpha <= -1.2, where S_nu ~ nu<sup>alpha</sup>) are identified. These sources are excellent candidates for high-redshift radio galaxies. The data used to produce this survey come from observations taken on 1998 March 7 intended to map two normal galaxies at 74 MHz (NGC 4565 and NGC 4631). These two pointings were separated by 6.4 degrees, roughly the radius of the primary beam at 74 MHz, allowing them to be ideally combined to produce a single deep image roughly 17 x 10 degrees in size. The combination of VLA A-configuration resolution (25 arcsec), favorable ionospheric conditions, and pointings in directions near the NGP, where the background temperature is low, produced the deepest observation ever obtained below 100 MHz. The same algorithm that was used in the 1.4-GHz NVSS was used to identify and characterize sources in this 74-MHz survey. The source detection algorithm had a threshold such that sources must have both a peak and integrated flux density level of at least 5 times the local rms noise level. Since the rms noise level varied from 24 mJy/beam to 80 mJy mJy/beam at the chosen field edge, the absolute level of the source-detection threshold of 5-sigma likewise varied over the image. This table was created by the HEASARC in August 2010 based on <a href="https://cdsarc.cds.unistra.fr/ftp/cats/J/ApJS/150/417/">CDS catalog J/ApJS/150/417/</a> file table2.dat. This is a service provided by NASA HEASARC .

restrictednotspecifiedApr 2025View details →
nasa20/100

Wind 3DP Linearly Interpolated 60 s Resolution data in GSE Coordinates

Wind linearly interpolated to have the measurements on the minute at 60 s resolution 3DP data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.

restrictednotspecifiedAug 2025View details →
nasa20/100

VG2 LECP 0.4S HIGH RESOLUTION URANUS FAR ENCOUNTER DATA

This far encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 2 while the spacecraft was within the vicinity of Uranus. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. During Uranus far encounter, the entire LEPT (Low Energy Particle Telescope) and part of the LEMPA (Low Energy Magnetospheric Particle Analyzer) subsystems were turned on for data collection. Particles include electrons, protons, alpha particles, and light, medium, and heavy nuclei particles. The far encounter data are 0.4 second rate measurements within 1/8 of the LECP instrumental motor rotation period (the angular scanning periods, or step period).

restrictedus-pdMar 2025View details →
nasa20/100

Wind 3DP Weimer Propagated 60 s Resolution in GSE Coordinates

Wind 3DP propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405. There are now two version of this data set. An off set has been found in the Wind MFI Bz component that is present after November 2004. Version 2 has this offset removed. Prof. R.L. McPherron determined the correction to be Bz = Bz - (-0.000000130406219.*odoy.*odoy + 0.000576303146.*odoy + 0.679940509 + 0.3215*cos(2*pi*(doy-171)/366)) where doy is the day of the year in units of days and odoy is the days sinces Jan 1, 1999 00:00:00 UT in units of days.

restrictednotspecifiedAug 2025View details →
nasa20/100

Sentinel-3A OLCI Level-2 Earth-observation Reduced-Resolution (ERR) Inherent Optical Properties (IOP), Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →
nasa20/100

Sentinel-3A OLCI Level-1B Earth-observation Reduced Resolution (ERR) Data, version 1

The Ocean and Land Colour Instrument (OLCI) is the successor to ENVISAT's Medium Resolution Imaging Spectrometer (MERIS) having additional spectral channels, different camera arrangements and simplified on-board processing. The OLCI is a push-broom instrument with five camera modules sharing the field of view. The field of view of the five cameras is arranged in a fan-shaped configuration in the vertical plane, perpendicular to the platform velocity. Each camera has an individual field of view of 14.2° and a 0.6° overlap with its neighbors. The whole field of view is shifted across track by 12.6 degrees away from the sun to minimize the impact of sun glint. OLCI is equipped with on-board calibration hardware based on sun diffusers. There are three sun diffusers--two 'white' diffusers dedicated to radiometric calibration and one dedicated to spectral calibration, with spectral reflectance features. The native resolution is approximately 300m, referred to as Full Resolution (FR). A Reduced Resolution (RR) processing mode provides Level-1B data at sampling rates decreased by a factor of four in both spatial dimensions resulting to resolution of approximately 1.2 km.

restrictednotspecifiedMar 2025View details →
nasa20/100

Cluster-Rumba Wideband Data (WBD) Plasma Wave Receiver/High Time Resolution Waveform Data

The following description applies to the Wideband Data (WBD) Plasma Wave Receivers on all four Cluster satellites, each satellite being uniquely identified by its number (1 through 4) or its given name (Rumba, Salsa, Samba, Tango, respectively). High time resolution calibrated waveform data sampled in one of 3 frequency bands in the range 0-577 kHz along one axis using either an electric field antenna or a magnetic search coil sensor. The dataset also includes instrument mode, data quality and the angles required to orient the measurement with respect to the magnetic field and to the GSE coordinate system. The AC electric field data are obtained by using one of the two 88m spin plane electric field antennas of the EFW (Electric Fields and Waves) instrument as a sensor. The AC magnetic field data are obtained by using one of the two search coil magnetometers (one in the spin plane, the other along the spin axis) of the STAFF (Spatio-Temporal Analysis of Field Fluctuations) instrument as a sensor. The WBD data are obtained in one of three filter bandwidth modes: (1) 9.5 kHz, (2) 19 kHz, or (3) 77 kHz. The minimum frequency of each of these three frequency bands can be shifted up (converted) from the default 0 kHz base frequency by 125.454, 250.908 or 501.816 kHz. The time resolution of the data shown in the plots is determined from the WBD instrument mode. The highest time resolution data (generally the 77 kHz bandwidth mode) are sampled at 4.6 microseconds in the time domain (~4.7 milliseconds in the frequency domain using a standard 1024 point FFT). The lowest time resolution data (generally the 9.5 kHz bandwidth mode) are sampled at 36.5 microseconds in the time domain (~37.3 milliseconds in the frequency domain using a standard 1024 point FFT). The availability of these files depends on times of DSN and Panska Ves ground station telemetry downlinks. A list of the status of the WBD instrument on each spacecraft, the telemetry time spans, operating modes and other details are available under Science Data Availability on the University of Iowa Cluster WBD web site at http://www- pw.physics.uiowa.edu/cluster/ and through the documentation section of the Cluster Science Archive (CSA) (https://www.cosmos.esa.int/web/csa/documentation). Details on Cluster WBD Interpretation Issues and Caveats can be found at http://www- pw.physics.uiowa.edu/cluster/ by clicking on the links next to the Caution symbol in the listing on the left side of the web site. These documents are also available from the Documentation section of the CSA website. For further details on the Cluster WBD data products see Pickett, J.S., et al., "Cluster Wideband Data Products in the Cluster Active Archive" in The Cluster Active Archive, 2010, Springer-Verlag, pp 169-183, and the Cluster WBD User Guide archived at the CSA website in the Documentation section. ... CALIBRATION: ... The procedure used in computing the calibrated Electric Field and Magnetic Field values found in this file can be obtained from the Cluster WBD Calibration Report archived at the CSA website in the Documentation section. Because the calibration was applied in the time domain using simple equations the raw counts actually measured by the WBD instrument can be obtained by using these equations and solving for 'Raw Counts', keeping in mind that this number is an Integer ranging from 0 to 255. Since DC offset is a real number, the resultant when solving for raw counts will need to be converted to the nearest whole number. A sample IDL routine for reverse calibrating to obtain 'Raw Counts' is provided in the WBD Calibration Report archived at the CSA. ... CONVERSION TO FREQUENCY DOMAIN: ... In order to convert the WBD data to the frequency domain via an FFT, the following steps need to be carried out: 1) If Electric Field, first divide calibrated data values by 1000 to get V/m; 2) Apply window of preference, if any (such as Hann, etc.); 3) Divide data values by sqrt(2) to get back to the rms domain; 4) perform FFT (see Bandwidth variable notes for non-continuous modes and/or the WBD User Guide archived at the CSA); 5) divide by the noise bandwidth, which is equal to the sampling frequency divided by the FFT size (see table below for appropriate sampling frequency); 6) multiply by the appropriate constant for the window used, if any. These steps are more fully explained in the WBD Calibration Report archived at the CSA.... +--------------------------+ Bandwidth Sample Rate ----------- -------------- 9.5 kHz 27.443 kHz 19 kHz 54.886 kHz 77 kHz 219.544 kHz +--------------------------+ COORDINATE SYSTEM USED: ... One axis measurements made in the Antenna Coordinate System, i.e., if electric field measurement, it will either be Ey or Ez, both of which are in the spin plane of the spacecraft, and if magnetic field measurement, it will either be Bx, along the spin axis, or By, in spin plane. The user of WBD data should refer to the WBD User Guide, archived at the CSA, Section 5.4.1

restrictednotspecifiedApr 2025View details →
nasa20/100

Calibrated Enhanced-Resolution Passive Microwave Daily EASE-Grid 2.0 Brightness Temperature ESDR V002

The Calibrated Enhanced-Resolution Passive Microwave Daily EASE-Grid 2.0 Brightness Temperature ESDR, Version 2 data set is a multi-sensor Level 3 Earth Science Data Record (ESDR) with improvements upon Version 1 in cross-sensor calibration and quality checking, modern file formats, better quality control, improved projection grids, and local time-of-day (LTOD) processing. These data are gridded to three EASE-Grid 2.0 projections (North Azimuthal, South Azimuthal, and Cylindrical) and include enhanced-resolution imagery, as well as coarse-resolution, averaged imagery. Inputs include brightness temperature data from the Scanning Multichannel Microwave Radiometer (SMMR), Special Sensor Microwave/Imager (SSM/I), Special Sensor Microwave Imager/Sounder (SSMIS), Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E), and Advanced Microwave Scanning Radiometer 2 (AMSR2).

restrictednotspecifiedMar 2025View details →
nasa20/100

P10 JUPITER HVM HIGH RESOLUTION

Pioneer 10 high-resolution magnetic-field data from the Helium Vector Magnetometer (HVM) during Jupiter encounter period between 1973-11-03T23:34:00 and 1973-12-29T23:10:38.

restrictedus-pdApr 2025View details →
nasa20/100

Global Multi-resolution Terrain Elevation Data 2010 (GMTED2010)

The USGS and the NGA have collaborated on the development of a notably enhanced global elevation model named the GMTED2010 that replaces GTOPO30 as the elevation dataset of choice for global and continental scale applications. The new model has been generated at three separate resolutions (horizontal post spacings) of 30 arc-seconds (about 1 kilometer), 15 arc-seconds (about 500 meters), and 7.5 arc-seconds (about 250 meters). This new product suite provides global coverage of all land areas from lat 84°N to 56°S for most products, and coverage from 84°N to 90°S for several products. Some areas, namely Greenland and Antarctica, do not have data available at the 15- and 7.5-arc-second resolutions because the input source data do not support that level of detail. An additional advantage of the new multi-resolution global model over GTOPO30 is that seven new raster elevation products are available at each resolution.

restrictednotspecifiedApr 2025View details →
nasa20/100

Nimbus High Resolution Infrared Radiometer Remapped Digital Data Daily L3, GeoTIFF V001

This data set (NmHRIR3G) consists of daily composites constructed from Nimbus 1, Nimbus 2, and Nimbus 3 satellites High Resolution Infrared Radiometer (HRIR) data for the region between 60 N and 60 S. Measurements were obtained during 1964, 1966, and 1969. Data are available as GeoTIFFs and browse images. For the HDF5 formatted version of these data, see the <a href="http://dx.doi.org/10.5067/NIMBUS/NmHRIR3H">Nimbus High Resolution Infrared Radiometer Remapped Digital Data Daily L3, HDF5</a> data set.

restrictednotspecifiedMar 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.