Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

5,155

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

5,155 results for “resolution”

Learn how ShareScore rates datasets ↗
nasa20/100

Polar TIMAS H0 High-resolution Level 1 Data

Mass resolved ion energy angle spectra covering nearly the full 4pi solid angle and the energy range 15 eV/q to 33 eV/q. H+, O+, He+ and He++ number fluxes and statistical uncertainties processed by the TIMAS science team. Data acquired with various angular and energy resolutions are combined here. Data Quality and other indicators are provided to allow selection of high resolution data (PA_status(ion)=0 and Energy_status(ion)=0 ) and High Quality data (Quality=0). See caveats for the following variables for more detailed information: Quality, PA_status, Energy_status Bcr, Fec, Even_odd, Energy_Range_ID and Spins. Reference:E.G. Shelley et al., The Toroidal Imaging Mass-Angle Spectrograph (TIMAS) for the Polar Mission, Sp. Sci. Rev, Vol 71, pp 497-530, 1995. Version 0: December, 1997 Version 1: July, 1998 Version 2: December, 2000 Algorithm improved to more accurately subtract backgrounds arising from spill over from H+ into He++ channel and other sources. Fill data are now inserted for limited energy and pitch angle ranges for Flux_H Flux_O Flux_He_1 and Flux_He_2 variables. The meanging of values of the of Quality variable was slightly modified. Version 3: June, 2002 Algorithm for V_02 had an error that resulted in under estimation of fluxes in high count regions, i.e. the cusp/cleft and radiation belts. V_03 corrects this error and has been expanded to include calculation of fluxes obtained after December 8, 1998, when TIMAS had a damaging high voltage breakdown that resulted in reduced sensitivity.

restrictednotspecifiedApr 2025View details →
nasa20/100

Geotail Low Energy Particle (LEP) experiment data Weimer Propagated 60 s Resolution in GSM Coordinates

Geotail LEP Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
nasa20/100

Sentinel-3B OLCI Level-2 Earth-observation Reduced Resolution (ERR) Ocean Color (OC) - Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedApr 2025View details →
nasa20/100

Cluster Tango Wideband Data (WBD) Plasma Wave Receiver/High Time Resolution Waveform Data

The following description applies to the Wideband Data (WBD) Plasma Wave Receivers on all four Cluster satellites, each satellite being uniquely identified by its number (1 through 4) or its given name (Rumba, Salsa, Samba, Tango, respectively). High time resolution calibrated waveform data sampled in one of 3 frequency bands in the range 0-577 kHz along one axis using either an electric field antenna or a magnetic search coil sensor. The dataset also includes instrument mode, data quality and the angles required to orient the measurement with respect to the magnetic field and to the GSE coordinate system. The AC electric field data are obtained by using one of the two 88m spin plane electric field antennas of the EFW (Electric Fields and Waves) instrument as a sensor. The AC magnetic field data are obtained by using one of the two search coil magnetometers (one in the spin plane, the other along the spin axis) of the STAFF (Spatio-Temporal Analysis of Field Fluctuations) instrument as a sensor. The WBD data are obtained in one of three filter bandwidth modes: (1) 9.5 kHz, (2) 19 kHz, or (3) 77 kHz. The minimum frequency of each of these three frequency bands can be shifted up (converted) from the default 0 kHz base frequency by 125.454, 250.908 or 501.816 kHz. The time resolution of the data shown in the plots is determined from the WBD instrument mode. The highest time resolution data (generally the 77 kHz bandwidth mode) are sampled at 4.6 microseconds in the time domain (~4.7 milliseconds in the frequency domain using a standard 1024 point FFT). The lowest time resolution data (generally the 9.5 kHz bandwidth mode) are sampled at 36.5 microseconds in the time domain (~37.3 milliseconds in the frequency domain using a standard 1024 point FFT). The availability of these files depends on times of DSN and Panska Ves ground station telemetry downlinks. A list of the status of the WBD instrument on each spacecraft, the telemetry time spans, operating modes and other details are available under Science Data Availability on the University of Iowa Cluster WBD web site at http://www- pw.physics.uiowa.edu/cluster/ and through the documentation section of the Cluster Science Archive (CSA) (https://www.cosmos.esa.int/web/csa/documentation). Details on Cluster WBD Interpretation Issues and Caveats can be found at http://www- pw.physics.uiowa.edu/cluster/ by clicking on the links next to the Caution symbol in the listing on the left side of the web site. These documents are also available from the Documentation section of the CSA website. For further details on the Cluster WBD data products see Pickett, J.S., et al., "Cluster Wideband Data Products in the Cluster Active Archive" in The Cluster Active Archive, 2010, Springer-Verlag, pp 169-183, and the Cluster WBD User Guide archived at the CSA website in the Documentation section. ... CALIBRATION: ... The procedure used in computing the calibrated Electric Field and Magnetic Field values found in this file can be obtained from the Cluster WBD Calibration Report archived at the CSA website in the Documentation section. Because the calibration was applied in the time domain using simple equations the raw counts actually measured by the WBD instrument can be obtained by using these equations and solving for 'Raw Counts', keeping in mind that this number is an Integer ranging from 0 to 255. Since DC offset is a real number, the resultant when solving for raw counts will need to be converted to the nearest whole number. A sample IDL routine for reverse calibrating to obtain 'Raw Counts' is provided in the WBD Calibration Report archived at the CSA. ... CONVERSION TO FREQUENCY DOMAIN: ... In order to convert the WBD data to the frequency domain via an FFT, the following steps need to be carried out: 1) If Electric Field, first divide calibrated data values by 1000 to get V/m; 2) Apply window of preference, if any (such as Hann, etc.); 3) Divide data values by sqrt(2) to get back to the rms domain; 4) perform FFT (see Bandwidth variable notes for non-continuous modes and/or the WBD User Guide archived at the CSA); 5) divide by the noise bandwidth, which is equal to the sampling frequency divided by the FFT size (see table below for appropriate sampling frequency); 6) multiply by the appropriate constant for the window used, if any. These steps are more fully explained in the WBD Calibration Report archived at the CSA.... +--------------------------+ Bandwidth Sample Rate ----------- -------------- 9.5 kHz 27.443 kHz 19 kHz 54.886 kHz 77 kHz 219.544 kHz +--------------------------+ COORDINATE SYSTEM USED: ... One axis measurements made in the Antenna Coordinate System, i.e., if electric field measurement, it will either be Ey or Ez, both of which are in the spin plane of the spacecraft, and if magnetic field measurement, it will either be Bx, along the spin axis, or By, in spin plane. The user of WBD data should refer to the WBD User Guide, archived at the CSA, Section 5.4.1

restrictednotspecifiedApr 2025View details →
nasa20/100

OLCI/Sentinel-3A L1 Reduced Resolution Top of Atmosphere Reflectance

The OLCI/Sentinel-3A L1 Reduced Resolution Top of Atmosphere Reflectance, S3A_OL_1_ERR is generated from the data aquired by the Ocean and Land Colour Instrument (OLCI) on board European Earth Observation satellite mission, SENTINEL-3. The OLCI is a push-broom imaging spectrometer that measures solar radiation reflected by the Earth at a ground spatial resolution of around 300m, over all surfaces, in 21 spectral bands. OLCI is based on the imaging design of ENVISAT's Medium Resolution Imaging Spectrometer (MERIS). It has a 1270km wide swath. For more information about the instrument and the mission, visit "Sentinel Online" at https://sentinel.esa.int/web/sentinel/home. The S3A_OL_1_ERR is a Level-1B product. This is composed of an information package map, called a manifest, 22 measurement data files, and seven annotation data files. The 21 measurement data files (one for each band) consist of Top Of Atmosphere (TOA) radiances, calibrated to geophysical units (W.m-2. sr-1 Micro meter-1), georeferenced onto the Earth's surface, and spatially resampled onto an evenly spaced grid. Seven annotation files provide information on illumination and observation geometry, environment data (meteorological data) and quality and classification flags. Both measurement data files and annotation data files are written in netCDF 4 format. The manifest file is in XML format and contains metadata associated with the instrument and the processing. The S3A_OL_1_EFR is generated in Earth Observation (EO) processing mode and all parameters in this product are provided for each re-gridded pixel on the product image and for each removed pixel. The OL_1_EFR product package is described below: Element name Description Manifest.safe SENTINEL-SAFE product manifest Oa##_radiance.nc Radiance for OLCI acquisition bands 01 to 21 Time_coordinates.nc Time stamp annotations Geo_coordinates.nc High resolution georeferencing data Quality_flags.nc Classification and quality flags Tie_geo_coordinates.nc Low resolution georeferencing data Tie_geometries.nc Sun and view angles Tie_meteo.nc ECMWF meteorology data Instrument_data.nc Instrument data note: Oa## represents all the OLCI channels (Oa1 to Oa21). For more information about the product, read the SENTINEL-3 OLCI User Guide at https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci

restrictednotspecifiedMar 2025View details →
nasa20/100

High-Resolution Rectified Aerial Photography for Collaborative Research of Environmental Change at Barrow, Alaska, USA, Version 1

This data set includes aerial photography of Barrow, Alaska, which has been geocorrected to a 2002 QuickBird satellite image or Interferometric Synthetic Aperture Radar (IFSAR) imagery. Photography included in the set is from these specific dates, from 1948 to 1997: 4 August 1948, 29 July 1949, 12-14 August 1955, 12-24 August 1962, 14 July 1964, 15 July 1979, 31 August 1984, and 16 July 1997. Data are in GeoTIFF and ESRI Shapefile formats with FGDC compliant metadata. Data on DVD are available for ordering. Note: The data for 14 July 1964 span both DVDs.

restrictednotspecifiedApr 2025View details →
nasa20/100

Sentinel-3A OLCI Level-2 Earth-observation Reduced Resolution (ERR) Ocean Color (OC) - Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →
nasa20/100

PSP FIELDS Fluxgate Magnetometer (MAG) Magnetic Field Vectors, Radial-Tangential-Normal, RTN, Coordinates, Full Resolution, Level 2 (L2), 3.413 ms Data

Parker Solar Probe FIELDS Instrument Suite Fluxgate Magnetometer, MAG, Data: The time resolution of the MAG time series data varies with instrument mode ranging from 2.289 samples/s to 292.9 samples/s. These two data sampling rates corresponding to 2 samples or 256 samples per 0.874 s where 0.874 s is equal to 2^25 divided 38.4 MHz. See reference [2] for a complete explanation of the MAG instrument sampling methodology. The Magnetometer has four ranges: ±1024 nT, ±4096 nT, ±16,384 nT, and ±65,536 nT. The Magnetometer Range is selected by an algorithm based on the strength of the ambient magnetic field. The magnetic field measurement precision is ±15 bits, based on the 16-bit Analog to Digital Converter, ADC.References:* 1. Fox, N.J., Velli, M.C., Bale, S.D. et al. Space Sci Rev (2016) 204: 7. https://doi.org/10.1007/s11214-015-0211-6* 2. Bale, S.D., Goetz, K., Harvey, P.R. et al. Space Sci Rev (2016) 204: 49. https://doi.org/10.1007/s11214-016-0244-5

restrictednotspecifiedAug 2025View details →
nasa20/100

ICON Michelson Interferometer for Global High-resolution Thermospheric Imaging Wind Vectors Red

The MIGHTI instrument measures the horizontal wind speed and direction (the wind vector). Each MIGHTI unit measures the wind along its line of sight. MIGHTI uses two perpendicular fields of view nominally pointing 45 degrees and 135 degrees in azimuth from the spacecraft velocity (MIGHTI A and MIGHTI B). Combining data from both units, this 90 degrees separation between their views allows the wind vector to be determined. For the wind measurements MIGHTI observes the Doppler shift of the atomic oxygen red and green lines at 630.0 nm and 557.7 nm wavelength. The wavelength shift is measured using field-widened, temperature compensated Doppler Asymmetric Spatial Heterodyne (DASH) spectrometers, employing low order échelle gratings operating at two different orders for the different atmospheric lines. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa20/100

Cluster-Salsa Wideband Data (WBD) Plasma Wave Receiver/High Time Resolution Waveform Data

The following description applies to the Wideband Data (WBD) Plasma Wave Receivers on all four Cluster satellites, each satellite being uniquely identified by its number (1 through 4) or its given name (Rumba, Salsa, Samba, Tango, respectively). High time resolution calibrated waveform data sampled in one of 3 frequency bands in the range 0-577 kHz along one axis using either an electric field antenna or a magnetic search coil sensor. The dataset also includes instrument mode, data quality and the angles required to orient the measurement with respect to the magnetic field and to the GSE coordinate system. The AC electric field data are obtained by using one of the two 88m spin plane electric field antennas of the EFW (Electric Fields and Waves) instrument as a sensor. The AC magnetic field data are obtained by using one of the two search coil magnetometers (one in the spin plane, the other along the spin axis) of the STAFF (Spatio-Temporal Analysis of Field Fluctuations) instrument as a sensor. The WBD data are obtained in one of three filter bandwidth modes: (1) 9.5 kHz, (2) 19 kHz, or (3) 77 kHz. The minimum frequency of each of these three frequency bands can be shifted up (converted) from the default 0 kHz base frequency by 125.454, 250.908 or 501.816 kHz. The time resolution of the data shown in the plots is determined from the WBD instrument mode. The highest time resolution data (generally the 77 kHz bandwidth mode) are sampled at 4.6 microseconds in the time domain (~4.7 milliseconds in the frequency domain using a standard 1024 point FFT). The lowest time resolution data (generally the 9.5 kHz bandwidth mode) are sampled at 36.5 microseconds in the time domain (~37.3 milliseconds in the frequency domain using a standard 1024 point FFT). The availability of these files depends on times of DSN and Panska Ves ground station telemetry downlinks. A list of the status of the WBD instrument on each spacecraft, the telemetry time spans, operating modes and other details are available under Science Data Availability on the University of Iowa Cluster WBD web site at http://www- pw.physics.uiowa.edu/cluster/ and through the documentation section of the Cluster Science Archive (CSA) (https://www.cosmos.esa.int/web/csa/documentation). Details on Cluster WBD Interpretation Issues and Caveats can be found at http://www- pw.physics.uiowa.edu/cluster/ by clicking on the links next to the Caution symbol in the listing on the left side of the web site. These documents are also available from the Documentation section of the CSA website. For further details on the Cluster WBD data products see Pickett, J.S., et al., "Cluster Wideband Data Products in the Cluster Active Archive" in The Cluster Active Archive, 2010, Springer-Verlag, pp 169-183, and the Cluster WBD User Guide archived at the CSA website in the Documentation section. ... CALIBRATION: ... The procedure used in computing the calibrated Electric Field and Magnetic Field values found in this file can be obtained from the Cluster WBD Calibration Report archived at the CSA website in the Documentation section. Because the calibration was applied in the time domain using simple equations the raw counts actually measured by the WBD instrument can be obtained by using these equations and solving for 'Raw Counts', keeping in mind that this number is an Integer ranging from 0 to 255. Since DC offset is a real number, the resultant when solving for raw counts will need to be converted to the nearest whole number. A sample IDL routine for reverse calibrating to obtain 'Raw Counts' is provided in the WBD Calibration Report archived at the CSA. ... CONVERSION TO FREQUENCY DOMAIN: ... In order to convert the WBD data to the frequency domain via an FFT, the following steps need to be carried out: 1) If Electric Field, first divide calibrated data values by 1000 to get V/m; 2) Apply window of preference, if any (such as Hann, etc.); 3) Divide data values by sqrt(2) to get back to the rms domain; 4) perform FFT (see Bandwidth variable notes for non-continuous modes and/or the WBD User Guide archived at the CSA); 5) divide by the noise bandwidth, which is equal to the sampling frequency divided by the FFT size (see table below for appropriate sampling frequency); 6) multiply by the appropriate constant for the window used, if any. These steps are more fully explained in the WBD Calibration Report archived at the CSA.... +--------------------------+ Bandwidth Sample Rate ----------- -------------- 9.5 kHz 27.443 kHz 19 kHz 54.886 kHz 77 kHz 219.544 kHz +--------------------------+ COORDINATE SYSTEM USED: ... One axis measurements made in the Antenna Coordinate System, i.e., if electric field measurement, it will either be Ey or Ez, both of which are in the spin plane of the spacecraft, and if magnetic field measurement, it will either be Bx, along the spin axis, or By, in spin plane. The user of WBD data should refer to the WBD User Guide, archived at the CSA, Section 5.4.1

restrictednotspecifiedApr 2025View details →
nasa20/100

ISEE-3 Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates

ISEE-3 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedApr 2025View details →
nasa20/100

Cluster-Rumba Wideband Data (WBD) Plasma Wave Receiver/High Time Resolution Electric and Magnetic Waveform Data Returned via BM2

The following description applies to the Wideband Data (WBD) Plasma Wave Receivers on all four Cluster satellites, each satellite being uniquely identified by its number (1 through 4) or its given name (Rumba, Salsa, Samba, Tango, respectively). High time resolution calibrated waveform data sampled in one of 3 frequency bands in the range 0-577 kHz along one axis using either an electric field antenna or a magnetic search coil sensor. The dataset also includes instrument mode, data quality and the angles required to orient the measurement with respect to the magnetic field and to the GSE coordinate system. The AC electric field data are obtained by using one of the two 88m spin plane electric field antennas of the EFW (Electric Fields and Waves) instrument as a sensor. The AC magnetic field data are obtained by using one of the two search coil magnetometers (one in the spin plane, the other along the spin axis) of the STAFF (Spatio-Temporal Analysis of Field Fluctuations) instrument as a sensor. The WBD data are obtained in one of three filter bandwidth modes: (1) 9.5 kHz, (2) 19 kHz, or (3) 77 kHz. The minimum frequency of each of these three frequency bands can be shifted up (converted) from the default 0 kHz base frequency by 125.454, 250.908 or 501.816 kHz. The time resolution of the data shown in the plots is determined from the WBD instrument mode. The highest time resolution data (generally the 77 kHz bandwidth mode) are sampled at 4.6 microseconds in the time domain (~4.7 milliseconds in the frequency domain using a standard 1024 point FFT). The lowest time resolution data (generally the 9.5 kHz bandwidth mode) are sampled at 36.5 microseconds in the time domain (~37.3 milliseconds in the frequency domain using a standard 1024 point FFT). The availability of these files depends on times of Panska Ves ground station telemetry downlinks. A list of the status of the WBD instrument on each spacecraft, the telemetry time spans, operating modes and other details are available under Science Data Availability on the University of Iowa Cluster WBD web site at http://www- pw.physics.uiowa.edu/cluster/ and through the documentation section of the Cluster Science Archive (CSA) (https://www.cosmos.esa.int/web/csa/documentation). Details on Cluster WBD Interpretation Issues and Caveats can be found at http://www- pw.physics.uiowa.edu/cluster/ by clicking on the links next to the Caution symbol in the listing on the left side of the web site. These documents are also available from the Documentation section of the CSA website. For further details on the Cluster WBD data products see Pickett, J.S., et al., "Cluster Wideband Data Products in the Cluster Active Archive" in The Cluster Active Archive, 2010, Springer-Verlag, pp 169-183, and the Cluster WBD User Guide archived at the CSA website in the Documentation section. ... CALIBRATION: ... The procedure used in computing the calibrated Electric Field and Magnetic Field values found in this file can be obtained from the Cluster WBD Calibration Report archived at the CSA website in the Documentation section. Because the calibration was applied in the time domain using simple equations the raw counts actually measured by the WBD instrument can be obtained by using these equations and solving for 'Raw Counts', keeping in mind that this number is an Integer ranging from 0 to 255. Since DC offset is a real number, the resultant when solving for raw counts will need to be converted to the nearest whole number. A sample IDL routine for reverse calibrating to obtain 'Raw Counts' is provided in the WBD Calibration Report archived at the CSA. ... CONVERSION TO FREQUENCY DOMAIN: ... In order to convert the WBD data to the frequency domain via an FFT, the following steps need to be carried out: 1) If Electric Field, first divide calibrated data values by 1000 to get V/m; 2) Apply window of preference, if any (such as Hann, etc.); 3) Divide data values by sqrt(2) to get back to the rms domain; 4) perform FFT (see Bandwidth variable notes for non-continuous modes and/or the WBD User Guide archived at the CSA); 5) divide by the noise bandwidth, which is equal to the sampling frequency divided by the FFT size (see table below for appropriate sampling frequency); 6) multiply by the appropriate constant for the window used, if any. These steps are more fully explained in the WBD Calibration Report archived at the CSA.... BURST MODE: ... WBD data can also be obtained in a mode called Burst Mode 2 (BM2), stored onboard, and transmitted to the ground with the data from all the other instruments. This mode has been rarely used throughout the mission only once prior to July 2010 (on March 7, 2001), but more often thereafter to obtain data at low altitude or in the high priority auroral acceleration region, because it results in decreased bandwidth or a higher degree of duty cycling for WBD. NASA's Deep Space Network terminated WBD data acquisition in February 2015 and after that date WBD

restrictednotspecifiedAug 2025View details →
nasa20/100

Sentinel-3B OLCI Level-3B Global Binned Earth-observation Reduced Resolution (ERR) Diffuse Attenuation Coefficient for Downwelling Irradiance (KD) - Near Real-time (NRT) Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

restrictednotspecifiedMar 2025View details →
nasa20/100

ICON Michelson Interferometer for Global High-resolution Thermospheric Imaging Viewing Direction B Temperature

MIGHTI samples the O2 A band spectral region at five different wavelengths in order to both measure the shape of the band and to specify a background radiance that is subtracted from the signal. The wavelengths of the filter passbands are selected to maximize the sensitivity to lower thermospheric temperature variations. The temperature measurement is accomplished by a multichannel photometric measurement of the spectral shape of the molecular oxygen A-band around 762 nm wavelength. For each field of view, the signals of the two oxygen lines and the A-band are detected on different regions of a single, cooled, frame transfer charge coupled device (CCD) detector. Two filter channels sample either end of the band to define a background (754.1 nm and 780.1 nm) and three more sample its shape (760.0 nm, 762.8 nm and 765.2 nm). Using three filters that sample the band shape allows the simultaneous retrieval of the atmospheric temperature and common shifts in the center wavelengths of the pass bands due to thermal drifts of the filters. On-board calibration sources are used to periodically quantify thermal drifts, simultaneously with observing the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa20/100

RENU2 Ion Gauge (IG2) Sensor Pressure, High Time Resolution (H0), 1 ms Data

Rocket Experiment for Neutral Upwelling 2, RENU2, Ionization Gauge, Neutral Gas Pressure Measurements

restrictednotspecifiedApr 2025View details →
nasa20/100

ACE SWEPAM Solar Wind Weimer Propagated 60 s Resolution Data in GSE Coordinates

ACE Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution SWEPAM data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.

restrictednotspecifiedAug 2025View details →
geo16/100

Transcriptomic Comparison of Common Nontyphoidal Salmonella Serovars Provides Greater Resolution for Understanding Differences in Virulence

GEO Series GSE150943. Salmonella enterica subsp. enterica serovar Typhimurium; Salmonella enterica subsp. enterica serovar Javiana; Salmonella enterica subsp. enterica serovar Cerro. 9 samples. Type: Expression profiling by high throughput sequencing.

openGEO-OpenMay 2020View details →
geo16/100

Regulatory eosinophils triggered by innate lymphoid cells type 2 during asthma induce resolution of chronic arthritis

GEO Series GSE153632. Mus musculus. 3 samples. Type: Expression profiling by high throughput sequencing.

openGEO-OpenNov 2020View details →
geo16/100

Mapping cell-cell fusion at single-cell resolution

GEO Series GSE286212. Homo sapiens. 26 samples. Type: Other.

openGEO-OpenJan 2025View details →
geo16/100

Mapping and dissecting essential regulatory elements using multi-resolution CRISPR screens

GEO Series GSE216577. Homo sapiens; Synthetic plasmid. 13 samples. Type: Expression profiling by high throughput sequencing.

openGEO-OpenJan 2023View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.