Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,580

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,580 results for “V2”

Learn how ShareScore rates datasets ↗
nasa28/100

PhenoCam Dataset v2.0: Digital Camera Imagery from the PhenoCam Network, 2000-2018

This dataset provides a time series of visible-wavelength digital camera imagery collected through the PhenoCam Network at each of 393 sites predominantly in North America from 2000-2018. The raw imagery was used to derive information on phenology, including time series of vegetation color, canopy greenness, and phenology transition dates for the PhenoCam Dataset v2.0.

restrictednotspecifiedApr 2025View details →
nasa28/100

JPSS-1 ATMS Level 1B Brightness Temperature V2 (SNDRJ1ATMSL1B) at GES DISC

The Advanced Technology Microwave Sounder (ATMS) Level 1B data files contain brightness temperature measurements along with ancillary spacecraft, instrument, and geolocation data of the ATMS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also known as NOAA-20 (National Oceanic and Atmospheric Administration). The ATMS is a 22-channel mm-wave radiometer. The ATMS will measure upwelling radiances in six frequency bands centered at 23 GHz, 31 GHz, 50-58 GHz, 89 GHz, 66 GHz, and 183 GHz. The ATMS is a total power radiometer, with “through-the-antenna” radiometric calibration. Radiometric data is collected by a pair of antenna apertures, scanned by rotating flat plate reflectors. Scanning is performed cross-track to the satellite motion from sun to anti-sun, using the "integrate-while-scan" type data collection. The scan period is 8/3 second, synchronized to the Cross-track Infrared Sounder (CrIS) using a spacecraft provided scan synchronization pulse.Since the JPSS-1 satellite is orbiting at an altitude of about 830 km, the instantaneous spatial resolution on the ground at nadir is about 16 km, 32 km, or 75 km depending upon the channel. The brightness temperature data are contained in an array with 135 rows in the along-track direction, 96 columns in the cross-track direction, and a 3rd dimension for each of the 22 channels. The ATMS cross-track scan interval is 0.018 seconds and the along-track scan period is 8/3 seconds. Data products are constructed on six minute boundaries.If you were redirected to this page from a DOI froman older version, please note this is the currentversion of the product. Please contact the GES DISCuser support if you need information about previousdata collections.

restrictednotspecifiedApr 2025View details →
nasa28/100

CAR SCAR-A Sulfates, Clouds, and Radiation-Atlantic BRDF Measurements BRDF V2 (CAR_SCARA_BRDF) at GES DISC

The objectives for the SCAR mission are to advance our knowledge of how the physical, chemical and radiative processes in our atmosphere are affected by sulfate aerosol and smoke from biomass burning; to improve our expertise at remotely sensing smoke, water vapor, clouds, vegetation and fires; and to assess the effects of deforestation and biomass burning on tropical landscapes. The SCAR-A campaign occurred in western Atlantic Ocean.This data set consists of observations made with the CAR instrument and includes values for bidirectional reflectance factor at varying spectral bands.

restrictednotspecifiedApr 2025View details →
nasa28/100

NLDAS Noah Land Surface Model L4 Hourly 0.125 x 0.125 degree V2.0 (NLDAS_NOAH0125_H) at GES DISC

This data set contains fifty-three fields simulated from the Noah land-surface model (LSM) for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from Jan 1979 to the present. The temporal resolution is hourly. The file format is netCDF (converted from the GRIB format). The Noah model was developed as the land component of the NOAA NCEP mesoscale Eta model [Betts et al. (1997); Chen et al. (1997); Ek et al. (2003)]. As used in NLDAS-2, recent modifications were made to Noah's cold-season [Livneh et al. (2010)] and warm-season [Wei et al. (2012)] parameterizations. Noah serves as the land component in the evolving Weather Research and Forecasting (WRF) regional atmospheric model, the NOAA NCEP coupled Climate Forecast System (CFS), and the Global Forecast System (GFS). The model simulates the soil freeze-thaw process and its impact on soil heating/cooling and transpiration, following Koren et al. (1999). The model has four soil layers with spatially invariant thicknesses of 10, 30, 60, and 100 cm. The first three layers form the root zone in non-forested regions, with the fourth layer included in forested regions. Details about the NLDAS-2 configuration of the Noah LSM can be found in Xia et al. (2012).

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: Suomi NPP CrIMSS Level 3 Specific Quality Control Gridded Monthly CLIMCAPS Normal Spectral Resolution V2 (SNDRSNIML3SMCCPN) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Normal Spectral Resolution (NSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 1305 NSR infrared sounding channels covering the longwave (655-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2155-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.This monthly one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable and applying specific QC methodology. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sentinel-5P TROPOMI Aerosol Layer Height 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__AER_LH_HiR) at GES DISC

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.For data before August 6th of 2019, please check S5P_L2__AER_LH_1 data collection.The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.Copernicus Sentinel-5P TROPOMI aerosol layer height algorithm applies a forward model, which includes DISAMAR (Determining Instrument Specifications and Analyzing Methods for Atmospheric Retrieval, a Layer-Based Orders of Scattering algorithm) to calculate monochromatic reflectance, and also employs a neural network scheme for speedy processor performance. Data retrieval uses the Optimal Estimation Method (OEM) for spectral fitting with various aerosol layer pressures and aerosol optical thicknesses in the Oxygen-A band (758 -770nm). The aerosol baseline model assumes a single uniformly distributed aerosol layer with a fixed pressure thickness and a constant aerosol volume extinction coefficient and single scattering albedo. The aerosol parameterization is particularly suitable for elevated non-scattering aerosols such as volcanic ash, desert dust and biomass burning plume. The product main outputs include the mid-pressure and mid-altitude of aerosol layers, aerosol optical thickness at 760nm, error estimates, and other relevant diagnostics.Starting from orbit #12432 on March 7th of 2020, the S-NPP auxiliary cloud data source used in the aerosol layer height product data processing has been transitioned from the VIIRS Cloud Mask (VCM) into the Enterprise Cloud Mask (ECM).

restrictednotspecifiedApr 2025View details →
nasa28/100

GEOS-Carb CASA-GFED 3-hourly Ecosystem Exchange Fluxes 0.5 degree x 0.625 degree V2 (GEOS_CASAGFED_3H_NEE) at GES DISC

This product provides 3 hourly average net ecosystem exchange (NEE) and gross ecosystem exchange (GEE)of Carbon derived from the Carnegie-Ames-Stanford-Approach – Global Fire Emissions Database version 3 (CASA-GFED3) model.The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing, quantifying, understanding, and predicting the evolution of global carbon sources and sinks through improved monitoring of carbon stocks and fluxes. The System will use the full range of NASA satellite observations and modeling/analysis capabilities to establish the accuracy, quantitative uncertainties, and utility of products for supporting national and international policy, regulatory, and management activities. CMS will maintain a global emphasis while providing finer scale regional information, utilizing space-based and surface-based data and will rapidly initiate generation and distribution of products both for user evaluation and to inform near-term policy development and planning.

restrictednotspecifiedApr 2025View details →
nasa28/100

NLDAS Mosaic Land Surface Model L4 Hourly 0.125 x 0.125 degree V2.0 (NLDAS_MOS0125_H) at GES DISC

This data set contains thirty-eight fields simulated from the Mosaic land-surface model (LSM) for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from Jan 1979 to the present. The temporal resolution is hourly. The file format is netCDF (converted from the GRIB format).Mosaic was developed by Koster and Suarez (1994, 1996) to account for subgrid vegetation variability with a tile approach. Each vegetation tile carries its own energy and water balance and soil moisture and temperature. Each tile has three soil layers, with the first two in the root zone. In NLDAS, Mosaic is configured to support a maximum of 10 tiles per grid cell with a 5% cutoff that ignores vegetation classes covering less than 5% of the cell. Additionally in NLDAS, all tiles of Mosaic in a grid cell have a predominant soil type and three soil layers with fixed thickness values of 10, 30, and 160 cm (hence constant rooting depth of 40 cm and constant total column depth of 200 cm). Details about the NLDAS-2 configuration of the Mosaic LSM can be found in Xia et al. (2012).

restrictednotspecifiedApr 2025View details →
nasa28/100

Land/Sea static mask relevant to TMPA precipitation 0.25x0.25 degree V2 (TRMM_TMPA_LandSeaMask) at GES DISC

Version 2 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 2.This land sea mask originated from the NOAA group at SSEC in the 1980s. It was originally produced at 1/6 deg resolution, and then regridded for the purposes of GPCP, TMPA, and IMERG precipitation products. NASA code 610.2, Terrestrial Information Systems Laboratory, restructured this TMPA land sea mask to match the TMPA grid, and converted the file to CF-compliant netCDF4. Version 2 was created in May, 2019 to resolve detected inaccuracies in coastal regions.Users should be aware that this is a static mask, i.e. there is no seasonal or annual variability, and it is due for update. It is not recommended to be used outside of the aforementioned precipitation data.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 2P sub-skin Sea Surface Temperature from the Advanced Very High Resolution Radiometer (AVHRR) on Metop satellites (currently Metop-A) (GDS V2) produced by OSI SAF

A global 1 km Group for High Resolution Sea Surface Temperature (GHRSST) Level 2P dataset based on multi-channel sea surface temperature (SST) retrievals generated in real-time from the Advanced Very High Resolution Radiometer (AVHRR) on the European Meteorological Operational-A (MetOp-A)satellite (launched 19 Oct 2006). The European Organization for the Exploitation of Meteorological Satellites (EUMETSAT),Ocean and Sea Ice Satellite Application Facility (OSI SAF) is producing SST products in near realtime from Metop/AVHRR. Global AVHRR level 1b data are acquired at Meteo-France/Centre deMeteorologie Spatiale (CMS) through the EUMETSAT/EUMETCAST system. SST is retrievedfrom the AVHRR infrared channels (3.7, 10.8 and 12.0 micrometer) using a multispectral algorithm.Atmospheric profiles of water vapor and temperature from a numerical weather prediction model,together with a radiatiave transfer model, are used to correct the multispectral algorithm forregional and seasonal biases due to changing atmospheric conditions. This product is delivered atfull resolution in satellite projection as metagranule corresponding to 3 minutes of acquisition. Theproduct format is compliant with the GHRSST Data Specification (GDS) version 2.

restrictednotspecifiedApr 2025View details →
nasa28/100

VIIRS/JPSS2 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT - V2

The VIIRS/JPSS2 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT product, short-name VJ214_NRT is based on the MODIS Fire algorithm. The input to the Active Fires production are Level-1B moderate-resolution reflective band M7, and emissive bands M13 and M15. The fire algorithm first calculates bands M13, M15 brightness temperature (BT) statistics for a group of background pixels adjacent to each potential fire pixel. These statistics are used to set thresholds for several contextual fire detection tests. There is also an absolute fire detection test based on a pre-set M13 BT threshold. If the results of the absolute and relative fire detection tests meet certain criteria, the pixel is labeled as fire. The designation of a pixel as fire from the results of the BT threshold tests may be overridden under sun glint conditions or if too few pixels were used to calculate the background statistics.The VJ214_NRT product contains several pieces of information for each fire pixel: pixel coordinates, latitude and longitude, pixel M7 reflectance, background M7 reflectance, pixel M13 and M15 BT, background M13 and M15 BT, mean background BT difference, background M13, M15, and BT difference mean absolute deviation, fire radiative power, number of adjacent cloud pixels, number of adjacent water pixels, background window size, number of valid background pixels, detection confidence, land pixel flag, background M7 reflectance, and reflectance mean absolute deviation.The product provides day and nighttime active fire detection over land and water (from gas flares). The VJ214 product provides fire data continuity with NASA's EOS MODIS 1 km fire product. For more information visit University of Maryland VIIRS Active Fire Web page at http://viirsfire.geog.umd.edu/

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: Suomi NPP CrIMSS Level 3 Specific Quality Control Gridded Daily CLIMCAPS Normal Spectral Resolution V2 (SNDRSNIML3SDCCPN) at GES DISC

The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Normal Spectral Resolution (NSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 1305 NSR infrared sounding channels covering the longwave (655-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2155-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable and applying specific QC methodology. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 48.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/48.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.gov

restrictednotspecifiedApr 2025View details →
nasa28/100

OMPS-NPP L2 NM Nitrogen Dioxide (NO2) Total and Tropospheric Column swath orbital V2 (OMPS_NPP_NMNO2_L2) at GES DISC

The OMPS-NPP L2 NM Nitrogen Dioxide (NO2) Total and Tropospheric Column swath orbital collection 2 version 2.0 product contains the retrieved nitrogen dioxide (NO2) measured by the Ozone Mapping and Profiling Suite (OMPS) Nadir-Mapper (NM) sensor on the Suomi-NPP satellite. A direct vertical column fitting (DVCF) algorithm is used to retrieve the NO2 total column amount and a new spatial technique is applied to separate the stratospheric and tropospheric amounts.Each granule contains data from the daylight portion for a single orbit or about 50 minutes. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14 orbits per day each with a swath width of 2600 km. There are 35 pixels in the cross-track direction, with a pixel resolution of about 50 km x 50 km at nadir. The files are written using the Hierarchical Data Format Version 5 or HDF5.

restrictednotspecifiedApr 2025View details →
nasa28/100

HURRICANE AND SEVERE STORM SENTINEL (HS3) GLOBAL HAWK ADVANCED VERTICAL ATMOSPHERIC PROFILING SYSTEM (AVAPS) DROPSONDE SYSTEM V2

The Hurricane and Severe Storm Sentinel (HS3) Global Hawk Advanced Vertical Atmospheric Profiling System (AVAPS) Dropsonde System dataset was collected by the Advanced Vertical Atmospheric Profiling System (AVAPS), built by the National Center for Atmospheric Research (NCAR), which served as the dropsonde system for the Global Hawk aircraft during the HS3 campaign. Goals for HS3 included: assessing the relative roles of large-scale environment and storm-scale internal processes; and addressing the controversial role of the Saharan Air Layer (SAL) in tropical storm formation and intensification as well as the role of deep convection in the inner-core region of storms. AVAPS dropsondes provide in-situ, high-vertical resolution measurements of atmospheric variables including pressure, temperature, humidity, geographic location, and winds, providing a vertical profile of the atmospheric conditions. The raw instrument measurement precision is as follows: pressure +-1.0 hPa, temperature +-0.2 degrees C, wind +-1 ms-1, and humidity +-7 percent. The measured information was transmitted via Iridium or Ku-Band satellite to the ground station where the Global Telecommunications System (GTS) performed additional processing for research and operational purposes.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST NOAA/STAR ACSPO v2.81 0.02 degree L3S Daily Dataset from LEO Satellites

The L3S_LEO_DY-STAR-v2.81 dataset produced by the NOAA Advanced Clear-Sky Processor for Ocean (ACSPO) system derives the Subskin Sea Surface Temperature (SST) from multiple instruments, including the VIIRS onboard the Suomi-NPP, NOAA-20 and NOAA-21 satellites, AVHRR onboard Metop-A, B , C satellites and MODIS onboard the Terra and Aqua satellites. The L3S-LEO is a family of multi-sensor super-collated (L3S) gridded 0.02º resolution SST products from low earth orbit (LEO) satellites. The L3S-LEO PM ( https://doi.org/10.5067/GHLPM-3S281 ) and AM ( https://doi.org/10.5067/GHLAM-3SS28 ) data include SSTs from afternoon (~1:30 am/pm) and mid-morning (~9:30 am/pm) satellites, respectively. The PM and AM SSTs, for both day (D) and night (N), and Terra MODIS SSTs, are further aggregated into a daily L3S-LEO-DY SST product. <br><br> The L3S-DY-SST combines the both L3S-LEO-PM/AM SSTs into a single daily product. It covers from 2000-02-24 to present and is reported in one file per 24h interval. Data are in NetCDF4 format, compliant with the GHRSST Data Specification version 2 (GDS2). The v2.81 succeeds the v2.80 dataset (not available from the PO.DAAC) with the following improvements: (1) The L3S-LEO-PM input was updated from v2.80 to v2.81; and (2) ACSPO Terra MODIS SST is included from 2000-02-24 to 2021-12-31. The inclusion of Terra extends the availability of L3S-LEO-DY back to 2000-02-24 (from 2006-12-01 in v2.80). The SST diurnal warming effects from different daily observation times across the series of instruments have been corrected and are described in the publications by Jonasson et al., 2022 <br><br>The Near Real Time (NRT) data are available with 6h latency, and replaced by the Re-ANalysis (RAN) files in 2 months, with identical file names. They can be differentiated by the file creation time and ancillary inputs. The data are validated against quality controlled in situ data from the NOAA in situ SST Quality Monitor (iQuam; https://www.star.nesdis.noaa.gov/socd/sst/iquam), and monitored in another NOAA system, SST Quality Monitor (SQUAM; https://www.star.nesdis.noaa.gov/socd/sst/squam)

restrictednotspecifiedApr 2025View details →
nasa28/100

CAR ECO3D BRDF Measurements V2 (CAR_ECO3D_BRDF) at GES DISC

This study provide critical measurements on 3-dimensional structure of vegetation, which is important for quantifying the amount of carbon stored in biomass. It promotes the understanding of vegetation response to changing forcing factors such as climate, storm frequency, and management practices, and is directly traceable to missions such as MODIS, MISR, and ICESat-2.During the ECO-3D mission in 2011, the CAR instrument was flown aboard the NASA P-3 and obtained measurements of bidirectional reflectance distribution function (BRDF) over forests ranging from Boreal to tropical wetlands covering sites from Quebec to Southern Florida.This data set consists of observations made with the CAR instrument and includes values for bidirectional reflectance factor at varying spectral bands.

restrictednotspecifiedApr 2025View details →
nasa28/100

Aqua AIRS Level 2 JoSFRA Retrieval Standard: Atmosphere cloud and surface geophysical state per footprint V2 at GES DISC

The Joint Single Footprint Retrieval Algorithm (JoSFRA) Level-2 geophysical parameters include estimates of atmospheric temperature and water vapor profiles, cloud properties, and surface temperature. These are retrieved from infrared spectra observed by the Atmospheric Infrared Sounder (AIRS) instrument on the Aqua satellite. AIRS is a grating spectrometer aboard Aqua, the second Earth Observing System (EOS) polar-orbiting platform. AIRS is co-boresited with the Advanced Microwave Sounding Unit (AMSU) also on Aqua. Horizontal resolutions are 50 km for AMSU and 13.5 km for AIRS. The JoSFRA algorithm uses an optimal-estimation scheme and retrieves geophysical quantities from AIRS thermal infrared spectra at their native horizontal resolution. Cloud observations from MODIS are used in the forward model without recourse to a cloud-cleared state. JOSFRA retrievals provide improved spatial resolution (13.5 km vs 50 km for cloud-cleared retrievals) and information content quantification, making them well-suited for process studies. JoSFRA retrievals are particularly useful in cases where high resolution (finer than 45 km) is needed or is beneficial, such as regions of strong horizontal gradients in water vapor. Use of JoSFRA retrievals is recommended under medium to low cloud cover. AIRS observations provide near-global coverage twice daily (around 1:30 am and pm local time) since August 30, 2002. An AIRS granule includes 6 minutes of data, 90 AIRS (30 AMSU) footprints across the orbit track by 135 AIRS (45 AMSU) footprints along track. Each day includes 240 granules, with an orbit repeat cycle of approximately 16 days. For the initial release of Version 2 JoSFRA, a limited test data set is provided. Future releases will expand the dataset. The initial dataset includes full global coverage data for two 5-day periods: January 13-17, 2011 and July 13-17, 2011, the Marine ARM GPCI Investigation of Clouds (MAGIC) (Lewis and Teixeira, EOS, 2015) test campaign in the Pacific Ocean with all 6-minute granules that overlap the box bounded by 20-35 degrees North latitude and 120-160 West longitude, June 1, 2012 – September 30, 2013, select granules from the years 2002-2007 where correlative data were available. The locations include Dept. of Energy (DOE) Atmospheric Radiation Measurement (ARM) sites at the North Slope of Alaska (NSA), Southern Great Plains (SGP), and Tropical Western Pacific (TWP), as well as scientific field campaigns.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: AQUA AIRS IR + MW Level 2 CLIMCAPS: Retrieved atmospheric state V2.1 (SNDRAQIML2CPS) at GES DISC

The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day

restrictednotspecifiedApr 2025View details →
nasa28/100

GLDAS VIC Land Surface Model L4 monthly 1.0 x 1.0 degree Early Product V2.1 (GLDAS_VIC10_M_EP) at GES DISC

NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is an Early Product for GLDAS-2.1 VIC 1.0 degree monthly dataset. The GLDAS-2.1 VIC 1.0 degree monthly data product, was generated through temporal averaging of GLDAS-2.1 VIC 3-hourly data simulated with the VIC Land Surface Model 4.1.2 in Land Information System (LIS) Version 7. The data product contains 34 land surface fields from January 2000 to present.The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards.The GLDAS-2.1 products supersede their corresponding GLDAS-1 products.The GLDAS-2.1 data are archived and distributed in NetCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

CALIPSO Lidar Level 2 Polar Stratospheric Clouds presents, composition, and optical properties, V2-00

The Version 2 (V2) CALIPSO Lidar Level 2 Polar Stratospheric Clouds (PSC) data product ensemble describes the spatial distribution, optical properties, and composition of PSC layers observed by the CALIPSO lidar (CALIOP). The product contains profiles of PSC presence, composition, optical properties, and meteorological information on a uniform 5-km horizontal x 180-m vertical grid along CALIPSO orbit tracks. Aura Microwave Limb Sounder (MLS) measurements of the primary PSC condensable vapors HNO3 and H2O and a number of parameters from the Aura MLS V2 Derived Meteorological Products (DMPs) are also included in the V2 PSC data product ensemble.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.