Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,460
datasets available to search
ShareScore release 0.9.0
Dataset results
8,460 results for “MONITORING”
Lightweight Self-adaptive Cloud-IoT Monitoring across Fed4FIRE+ Testbeds (LiSCIo)
<p>Monitoring will be crucial to properly orchestrate next-gen services. Indeed, monitoring’s output can be exploited to choose where to deploy application services for the first time and to decide when and where to migrate them in case their QoS and contextual requirements cannot be satisfied by the current deployment and infrastructure state. However, only a few works have focused so far on the design and prototyping of monitoring tools for next-gen Cloud-IoT computing platforms.</p> <p>In this context, <a href="https://github.com/di-unipi-socc/FogMon">FogMon</a>, described in (Brogi et al., 2019) and (Forti et al., 2021), is an open-source C++ distributed monitoring service targeting heterogeneous infrastructures along the Cloud-IoT continuum, e.g. Fog computing. FogMon monitors hardware and virtualised resources at different Cloud-IoT computing nodes, end-to-end network QoS between such nodes, as well as available IoT devices. Besides, it features a self-organising peer-to-peer overlay topology with self-restructuring mechanisms and differential monitoring updates, which feature scalability, fault-tolerance, and low communication overhead.</p> <p>The LiSCIo project aimed at assessing FogMon over increasing infrastructures from 20 to 40 Cloud and Edge nodes, spanning two testbeds within the Fed4Fire+ federated infrastructure. Particularly, LiSCIo implemented a new version of the service, i.e. <a href="https://github.com/di-unipi-socc/FogMon-LiSCIo/tree/2.0">FogMon 2.0</a>, which was thoroughly fixed and tuned over a large number of experiments carried on Fed4Fire+ facilities. Throughout the project, data have been collected on all the measurements performed by FogMon 1.x and by FogMon 2.0 (viz. node hardware, IoT, latency, bandwidth) to assess their footprint on hardware resources and bandwidth in all settings, and the relative error on its estimates of latency and bandwidth against ground-truth configurations, enforced via GRE tunnels.</p>
[Dataset] In situ laser-ultrasonic monitoring of Poisson's ratio and bulk sound velocities of steel plates during thermal processes
<p>Data generated and analyzed in the work titled "In situ laser-ultrasonic monitoring of Poisson’s ratio and bulk sound velocities of steel plates during thermal processes". See the associated publication for more context.</p> <p>All files are stored in Matlab's binary MAT-file format.</p> <ul> <li>cutOffs_ZGVs_nu_S1S2_A2A3_S3S6_A4A7.mat <ul> <li>Dispersion relation data of plates obtained from numerical calculation with a range of Poisson's ratios and otherwise arbitrary but fixed material properties.</li> <li>S1S2-, A2A3-, S3S6- and A4A7-ZGV resonance frequencies and k-values</li> <li>L1 and T1 thickness resonance frequencies</li> </ul> </li> <li>lusResults_jmat_dilatometry_data.mat <ul> <li>LUS measurement data and resulting material properties (raw displacement data recorded on the oscilloscope is stored separately to keep the file size reasonable.)</li> <li>Dilatometer measurements</li> <li>JMatPro simulation</li> </ul> </li> <li>lusOscilloscope_data.mat <ul> <li>Normal surface displacement measurement data obtained in situ with LUS and recorded with an oscilloscope</li> </ul> </li> </ul>
Cereal aphids monitored in 2,110 fields in Denmark 2002-2019
<p>The aphids were accounted for visually as the percentage of tillers infested. The type of crop (winter wheat or spring barley) and its growth stage at the time of aphid assessment are included in the data set.</p> <p>The data is provided as both a tab-separated text file and a binary R data file. The R files provides code to read and plot the data. The two plots produced are also provided as PNG files.</p> <p>The data were collected by SEGES Innovation, Denmark.</p>
Local survey network and monitoring data of VLBI telescope at Metsähovi
<p>Observations of local surveying network and monitorin at Metsähovi. More information is in file Data_description.pdf.</p>
USM Dataset - A Dataset for Polyphonic Sound Event Tagging in Urban Sound Monitoring Scenarios
<p>This dataset includes 24,000 5-seconds-long polyphonic stereo soundscapes composed of sounds taken from the FSD50k dataset:</p> <p>- Eduardo Fonseca, Xavier Favory, Jordi Pons, Frederic Font, Xavier Serra. FSD50K: an Open Dataset of Human-Labeled Sound Events (<a href="https://arxiv.org/abs/2010.00475">https://arxiv.org/abs/2010.00475</a>)</p> <p>FSD50k samples used in the USM dataset were selected to allow for commercial usage.</p> <p>Find more details about the USM dataset at <a href="https://github.com/jakobabesser/USM">https://github.com/jakobabesser/USM</a></p>
Estimating the carbon footprint of citizen science biodiversity monitoring
<p>Datasets used in the production of the paper Gillings, S. & Harris, S.J. 2022. Estimating the carbon footprint of citizen science biodiversity monitoring. People & Nature.</p> <p>The dataset comprises a) the estimated round-trip distances from approximate locations of observers to survey locations for the UK Breeding Bird Survey and b) questionnaire responses concerning mode of travel used to access survey locations. Data have been anonymised and locations have been coarsened to preserve anonymity.</p> <p>We would also greatly appreciate if you could fill out <a href="https://forms.gle/DCc58VXpdmqnTmTk8" target="_blank" rel="noopener">this very short form</a> to tell us how you intend to use these data. Thanks in advance!</p> <p> </p> <p> </p>
Pre-Preg (PP) Manufacturing and Spring-in monitoring through FBGs, DCs and 3D CMM measurements
<p>ELADINE project is aiming to implement a numerical tool that can reduce reoccurring costs of low-volume production in composite manufacturing of primary structural elements and thus reducing overall manufacturing effort and carbon emissions. A<strong> primary goal of this project is to eliminate tolerance non-compliancy in the manufactured structures caused by natural and unavoidable post-manufacturing distortions, typical for composite materials</strong>. These distortions might render otherwise qualitative components unusable due to their final geometry.</p> <p>Objectives of the Numerical model validation are:</p> <ul> <li>To understand the dominant factors which affects the spring-in phenomenon.</li> <li>To provide the simulation tool with the required values of the properties that influence on spring-in.</li> <li>To verify the simulation tool ability to predict spring-in for a variety of conditions.</li> <li>To develop a procedure of adapting and embedding sensors (dielectric and fiber optic) to obtain proper, useful and accurate signals of the manufacturing parameters (T, degree of cure, strain).</li> <li>To develop interpretation procedures of the signal/curves of sensors to obtain on-line process monitoring information.</li> </ul> <p>To obtain the data to feed and develop the numerical tool able to estimate the component distortions after its manufacturing, a combination of Fiber Optic Sensors (FOS) based on Fiber Bragg Grating (FBG) technology, Dielectric Curing sensors (DC) and 3D scanning were used to monitor the composite coupon manufacturing and the distortions the days after being demoulded. During the manufacturing process embedded FBGs and DC sensors were used to monitor the coupon temperature and strain distribution and resin curing evolution. After the manufacturing and the demolding, the distortions evolution were monitored by the embedded FBGs and by 3D CMM measurements.</p> <p><strong>In the ELADINE project, the distortion monitoring was made to two Out-of-Autoclave manufacturing technologies: liquid resin infusion and oven cured Pre-Preg (PP)</strong>. For both material systems, slightly curved coupons and C-shaped coupons were the geometries selected as representative for the Skin and spars of the wing box. The Skin coupon was curved panel with a 1475 mm radius (with edge rise of 7,65 mm) that was thought to best replicate the wing profile geometry. The C-spar coupon geometry selected for the study was a non-tapered spar section with two different angle with radius of curvature of 5mm and 12mm. This geometry was chosen to simplify measuring and comparisons with wing demo. Furthermore, three different thickness are studied for the Skin coupons and two for the C-spar coupons which were selected from different zones along the wing. Moreover, a C-spar coupon with variable thickness was studied, as a simulation of the transition between zones with different thickness in the wing.</p> <p><strong>In this dataset, the data obtained from the FBGs, DCs and 3D CMM meassurements during a PP manufacturing process and spring-in distortions monitoring can be found.</strong></p>
Streamflow drought hazard indicators for monitoring drought risk for human water supply and river ecosystems at the global scale
<p><strong>1) Indicators of streamflow drought hazard (SDHI) as computed by WaterGAP 2.2d (climate data WFDEI-GPCC) for the whole globe except Antarctica, spatial resolution: 0.5°, monthly data for the reference period 1986-2015:</strong></p> <p><strong>Indicators of drought magnitude: </strong>SPI12, SPEI12, SSI1, SSI12, EP1, RDQI1</p> <p><strong>Indicators of drought severity: </strong>CDQI1-Q50, CDQI1-Q80, CDQI1-Q80-HS, CDQI1-WUs, CDQI1-WUs-EFR, CDQI1-Q50_f, CDQI1-Q80_f, CDQI1-WUs_f, CDQI1-WUs-EFR_f, CEP1(20%)_f, CRDQI1(-50%)_f</p> <p><strong>2) WaterGAP grid cell IDs ("arcid") with longitude and latitude </strong>(WaterGAP_ArcID_lon_lat.txt)</p> <p><strong>3) Streamflow observations and SDHI (based on observations) for two GRDC gauging stations: </strong>Input_Figure_2_Little_Colorado_River.txt (station near Cameron) and Input_Figure_2_Danube_River.txt (station at Hofkirchen)</p> <p><strong>4) WaterGAP output: Mean monthly surface water abstractions in km3 per month: </strong>Mean_monthly_WUs_km3_per_month_WFDEI_GPCC_ant_22d_1986_2015.txt</p> <p><strong>5) Input data for computing Pearson correlation between SSI1 based on observations and each of the five indicators SSI1 (simulated), SPI3, SPI6, SPI9, and SPI12.</strong> Indicators computed for 218 out of 220 GRDC gauging stations with continuous streamflow observations between 1986 and 2015. The folder also contains a list of the 220 GRDC station numbers and the related WaterGAP grid cell ID ("arcid").</p> <p> </p>
Fuel loads monitoring dataset of Campos Amazônicos Fire Experiment (Amazonas, Brazil)
<p>This dataset presents fuel loads monitoring data related to the Campos Amazônicos Fire Experiment (CAFE) (Amazonas, Brazil) project. Located within a protected area within the largest enclave of tropical savanna in the Southern Amazon, CAFE comprises a careful and systematic experimental design that was conceived from the start to evaluate satellite observations and their potential and limitations in studying spatial and temporal fire dynamics in tropical savannas.</p> <p>More information about the experimental design can be found in the following publication:</p> <p>Alves, D. B.; Fidelis, A.; Pérez-Cabello, F.; Alvarado, S. T.; Conciani, D. E.; Cambraia, B. C.; Silveira, A. L. P.; Silva, T. S. F. Impact of Image Acquisition Lag-Time on Monitoring Short-Term Postfire Spectral Dynamics in Tropical Savannas: the Campos Amazônicos Fire Experiment. Journal of Applied Remote Sensing v. 16, n. 3 (2022) - <a href="https://doi.org/10.1117/1.JRS.16.034507">https://doi.org/10.1117/1.JRS.16.034507</a></p> <p>_____________________________________________________________________________</p> <p>August 08, 2022 - Version 1.0 includes data from 30 monitored experimental plots of 1 hectare each (100×100 m). Three experimental treatments were then established: 12 plots were burned in May (Early-Dry Season – EDS), further 12 plots were burned in August (Mid-Dry Season – MDS), and 6 plots were kept as control by ensuring fire exclusion throughout the duration of the experiment. Controlled burning occurred during two separate field campaigns in 2019, the first between May 19th and 25th, and the second between August 22nd and 26th.</p> <p>Measurements of fuel load were obtained from eight subplots of 0.5 × 0.5 m randomly distributed within each plot. Samples included graminoids, leaves and branches near the ground. Biomass was dried at 70°C for 48 hours, and weighed to determine total fuel load (kg. m<sup>-2</sup>) for each sample. Samples were taken before fire for all control, EDS and MDS burn plots during both field campaigns, and repeated sampling was carried out after fire for the burned plots. In 2020, all 30 monitored plots were sampled again in May and August.</p> <p>The files available include: i) a table (Fuel_load_measures.csv) that contains the measures of fuel loads for each plot; ii) a text file (List_of_variables.rtf), which details each variable available in the table.</p> <p>_____________________________________________________________________________</p> <p>We thank the management team of the Campos Amazônicos National Park, and in particular to its Fire Brigade (squad leaders José Furtado Neto, Genaldo Júnior, Ademilton Carvalho, Simei Limoeiro, José Alexandre Medeiros, Antonio Machado and Leandro Lacerda, and on behalf of them to all other members of the brigade), who ensure safe burning of all fire experiments (SISBIO license number 67210-5). This work was supported by the Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP, grant numbers 2019/07357-8; 2015/06743-0); the Conselho Nacional de Pesquisa e Desenvolvimento (CNPq, grant numbers 154660/2018-3; 441968/2018-0; 303988/2018-5).</p>
Datasets of titrations of mineral water hardness monitored using SERS
<p>These datasets contains the spectral information used in a publication regarding the implementation of complexometric titrations of water hardness monitored using Surface Enhanced Raman Spectroscopy (SERS).</p> <p>The data consists of two csv files with semi-column separators.</p> <p><em>« MD150 to 155_Master_df_638_corrected_mod_v02.csv »</em> and <em>« MD150 to 155_Master_df_785_corrected_mod_v02.csv »</em> correspond to spectral data acquired under 638 and 785 nm irradiation respectively.</p> <p>The data are organised as row vectors.</p> <p>Each dataset has 432 rows corresponding to 3 water samples (Evian, Volvic, Contrex), 3 replicate titration series + 1 blank titration per batch of NPs, 2 batches of NPs and 18 titration steps per titration series: .</p> <p>The row vectors consist of a first sub-vector of spectral descriptors (identity of spectra, identity and composition of measurement samples and conditions of spectral acquisition), followed by a sub-vector of baseline-substracted spectral intensities.</p> <p>In both datasets, the first 14 columns consists of the spectral descriptors.</p> <p>In the <em>« MD150 to 155_Master_df_638_corrected_mod_v02.csv » </em>dataset, the spectra section consists of 1010 columns which names are the values of the Raman shifts at which the intensities have been recorded.</p> <p>In the <em>« MD150 to 155_Master_df_785_corrected_mod_v02.csv »</em> dataset, the spectra section consists of 1746 columns which names are the values of the Raman shifts at which the intensities have been recorded.</p>
Monitoring open access publishing of NWO funded research (2015-2021) data set
<p>This is the dataset underlying the report "Monitoring open access publishing of NWO funded research" (<a href="https://doi.org/10.5281/zenodo.7041897">https://doi.org/10.5281/zenodo.7041897</a>)</p> <p>The report presents statistics on the extent to which publications from the period 2015–2021 funded by NWO are available in Open Access. The analyses presented in this report also cover publications funded by the Netherlands Organisation for Health Research and Development ZonMw. This report builds on two earlier reports, published in <a href="https://zenodo.org/record/4446042">2020</a> and <a href="https://zenodo.org/record/5056043">2021</a>, covering publications from the period 2015–2018 and 2015-2020, respectively.</p>
Monitoring feedback to authors on the quality of trials evaluating interventions aimed at preventing and treating COVID-19
<p>We aimed to assess transparency of reporting and risk of bias of randomized trials evaluating interventions aimed at preventing and treating COVID-19.</p> <p>This review is part of a larger project: the COVID-NMA project (Boutron 2020a). The COVID-NMA project aims to provide decision-makers with a complete, high-quality and up-to-date synthesis of evidence on interventions for the prevention and treatment of COVID 19. For this purpose, we perform a living mapping of all registered randomized controlled trials and a living evidence synthesis of data from RCTs. We developed a master protocol on the effect of all interventions for the prevention and treatment of COVID-19 (first published on April 8, 2020; an update on May 11, 2020, June 17, 2020, and September 8, 2020) (Boutron 2020b). We set-up a platform (<a href="https://covid-nma.com/">https://covid-nma.com</a>) where all our results are made available and updated weekly.</p>
Accuracy and Reliability of Noninvasive Stroke Volume Monitoring via ECG-Gated 3D Electrical Impedance Tomography in Healthy Volunteers
<p>3D EIT dataset of ten healthy human volunteers, as described in the corresponding <a href="http://dx.doi.org/10.1371/journal.pone.0191870">journal publication at PLOS ONE</a> or the first author's <a href="http://dx.doi.org/10.5075/epfl-thesis-8343">PhD thesis at EPFL</a>. Please also read the attached ReadMe file.</p> <p>When using this data please cite the corresponding journal publication:</p> <blockquote> <p>Accuracy and Reliability of Noninvasive Stroke Volume Monitoring via ECG-Gated 3D Electrical Impedance Tomography in Healthy Volunteers, PLOS ONE, 2018, <a href="http://dx.doi.org/10.1371/journal.pone.0191870">https://dx.doi.org/10.1371/journal.pone.0191870</a></p> </blockquote>
[Data] Qualify-As-You-Go: Sensor Fusion of Optical and Acoustic Signatures with Contrastive Deep Learning for Multi-Material Composition Monitoring in Laser Powder Bed Fusion Process
<p><br>Growing demand for multi-material Laser Powder Bed Fusion (LPBF) faces process control and quality monitoring challenges, particularly in ensuring precise material composition. This study explores optical and acoustic emission signals during LPBF processes with multiple materials, addressing challenges in process control and ensuring accurate material composition. Experimental data from processing five powder compositions were collected using a custombuilt monitoring system in a commercial LPBF machine. The research categorised signals from LPBF processing various compositions, enhancing prediction accuracy by combining optical with acoustic data and training convolutional neural networks using contrastive learning. Latent spaces of trained models using two contrastive loss functions, clustered acoustic and optical<br>emissions based on similarities, aligning with five compositions. Contrastive learning and sensor fusion were found to be essential for monitoring LPBF processes involving multiple materials. This research advances the understanding of multi-material LPBF, highlighting sensor fusion strategies’ potential for improving quality control in additive manufacturing. Data set for this work is hosted here</p>
PhytoNode Upgraded: Energy-Efficient Long-Term Environmental Monitoring Using Phytosensing
<p>The urban population continues to grow despite health risks associated with densely populated cities, such as traffic congestion and air pollution. At the same time cities are also further heating up due to climate change. Environmental monitoring is increasingly critical to react quickly to temporarily increased concentrations of, for example, carbon monoxide, nitrogen oxides, ozone, and particulate matter. <br>We introduce a significantly improved version of our PhytoNode, an energy-efficient sensor node designed for phytosensing, that is, using of plants as environmental sensors. We aim for a scalable and sustainable real-time monitoring solution following our vision of an `intelligent plant' as an inexpensive and accurate sensor node. <br>We measure electrical potentials and leaf temperatures of plants to assess their well-being and, in turn, environmental conditions. <br>The PhytoNode achieves long-term energy autonomy by harvesting energy via solar cells and shares data via Bluetooth Low Energy (BLE) communication. We process the gathered time series plant data onboard in real-time using methods of Machine Learning (ML) to analyze the plant's activity and to detect dangerous concentrations of gases. In a few showcasing experiments, we demonstrate the feasibility of both our hardware and software approach for continuous, long-term environmental monitoring based on phytosensing. By embedding engineered devices in living plants as a `plant wearable' that listens to plant responses, we hope to help pushing towards smarter future cities and healthier urban environments. </p> <p> </p> <p>Data repository for our paper "PhytoNode Upgraded: Energy-Efficient Long-Term Environmental Monitoring Using Phytosensing", submitted to the 8th Future of Information and Communication Conference 2025 (FICC 2025). Please refer to the paper for more information.</p>
Supporting Movies from: Seismo-acoustic observations of crashing ocean waves: Investigating surf monitoring at Coal Oil Point Reserve, Santa Barbara, California
<div> <div> <div> <p>This repository includes supplementary movies from the manuscript titled, "Seismo-acoustic observations of crashing ocean waves: Investigating surf monitoring at Coal Oil Point Reserve, Santa Barbara, California," submitted to the Journal of Geophysical Research: Solid Earth.</p> <p> </p> <p>Movies S1 and S2. These two movies taken during array deployment 4 on October 20, 2023 show the NW tip of Coal Oil Point at the left of the field of view and Sands Beach northwest of that toward the right. Frames have the same figure layout as Figure 4 of the main text.</p> <p>Movie S3. Same as Movies S1 and S2 but with the NW tip of Coal Oil Point at the right of the field of view and Devereux Beach southeast of that toward the left.</p> </div> </div> </div>
Reproduction package for the paper "Exploring the directly imaged HD 1160 system through spectroscopic characterization and high-cadence variability monitoring"
<p>This is a basic reproduction package for the paper <a href="https://doi.org/10.1093/mnras/stae1315">"Exploring the directly imaged HD 1160 system through spectroscopic characterization and high-cadence variability monitoring" by Sutlieff et al. (2024)</a>. It aims to provide the most important data products to check and reproduce the main results of the paper.</p>
Raw Data for Evaluation of Measurement Uncertainty in Structural Health Monitoring Systems Under Temperature Influence
<p>The documentation on these laboraty tests is titled "Documentation.pdf"</p> <p> </p> <p>Raw data from distance measurements using laser triangulation sensors acquired under different temperatures are provided. Six sensors were tested per experiment (CSV file), and in each experiment the boundary conditions are varied as follows:<br><br>00RawData_LTS_1m: The entire measurement system is subject to temperature change, with initial distances chosen as LTS1/LTS2=17 mm, LTS3/LTS4=21 mm nd LTS5/LTS6=25 mm.<br><br>01RawData_LTS_1m_SwitchedDistances: The entire measurement system is subject to temperature change, with the selected initial distances of LTS1/LTS2=25 mm, LTS3/LTS4=17 mm nd LTS5/LTS6=21 mm.<br><br>02RawData_LTS_1m_SwitchedDistances2: The entire measurement system is subject to temperature change, with initial distances selected as LTS1/LTS2=21 mm, LTS3/LTS4=25 mm nd LTS5/LTS6=17 mm.<br><br>03RawData_LTS_1m_OnlySensor: Only the sensors of the measuring system are subject to temperature change, where the selected initial distances are LTS1/LTS2=21 mm, LTS3/LTS4=25 mm nd LTS5/LTS6=17 mm.<br><br>04RawData_LTS_1m_OnlyMeasuringAmplifier: Only the measuring amplifiers of the measuring system are subject to temperature change. The selected initial distances are LTS1/LTS2=21 mm, LTS3/LTS4=25 mm nd LTS5/LTS6=17 mm.<br><br>05RawData_LTS_1m_OnlyCable: Only the cables of the measurement system are subject to the temperature change. The selected initial distances are LTS1/LTS2=21 mm, LTS3/LTS4=25 mm nd LTS5/LTS6=17 mm.<br><br>Tested temperature range: -10°C to 50°C<br>Measuring frequency: 1 Hz<br>Measuring amplifier: Q.bloxx.XL A107 Gantner Instruments<br>Cable: 4-pole, 1.00 m length<br>Sensor: OM20-P0026.HH.YIN laser triangulation sensor from Baumer</p>
2023 Utrecht University Open Access Monitor (peer reviewed journal articles)
<p>Results of the OA monitor of Utrecht University (UU) and University Medical Center Utrecht(UMCU) for the year 2023. It lists the open access availability of all peer reviewed journal articles registered in the CRIS (Pure) of Utrecht University and/or University Medical Center Utrecht. </p>
Detailed sap flow monitoring data at Weierbach catchment, Luxembourg
<p>The current repository contains the dasometric data of monitored trees, hourly sap flow data, and tree surveys carried out at the Weierbach catchment during 2019 and 2020. The monitored trees include the following species:</p> <p>- Beech (<em>Fagus sylvatica </em>L.)</p> <p>- Douglas Fir (<em>Pseudotsuga menziesii</em> (Mirbel) Franco)</p> <p>- Spruce (<em>Picea abies </em>L.)</p> <p>- Oak (hybrids of <em>Quercus petraea</em> (Matt.) Liebl. and <em>Quercus robur </em>L.)</p> <p>The sap flow data for all the trees is presented in cm/hr.</p> <p>The bark data presented in the "dasometry_individual_trees.csv" was obtained from the literature.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.