Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
977
datasets available to search
ShareScore release 0.9.0
Dataset results
977 results for “calculations”
2023 HamSCI Gladstone Signal Spotting Challenge (GSSC) Data and Scoring Calculations
<p>The ZIP file contains all data sources used in scoring the October 13, 2023 running of the HamSCI GSSC competition: ReverseBeacon.net, WSPRnet.org, PSKReporter.info. There is a ZIP file containing each entrant's data as extracted from the WSPRnet data. Further, it contains the participant entries (in an Apple Mac OS Numbers formatted spreadsheet) along with the scoring calculation file (Numbers format). Included is a description of the scoring methodology (Apple Mac OS Pages format) and the shell scripts used to extract the WSPRnet data. The GSSC 2023 Results Writeup.pdf, as published to the HamSCI.org website, summarizes the entire event. </p> <p>Additional ZIP files, eg gssc2023bonusXX.zip, contain emails and attachments (PDF, jpg, etc) submitted by the entrants for bonus points.</p> <p>The purpose of the GSSC competition was to generate ham radio 'spots' (records of 1- and 2-way amateur radio contacts on the shortware bands, aggregated in the form of transmission and reception reports stored in the data sources referenced above). The 'spot' data is intended for use in studies of radio wave propagation via the ionosphere.</p>
Sentinel 2 images before and after a forest fire for NBR calculation
<p>Dataset for remote sensing NBR calculation excercise</p> <p>Sentinel 2 images before (2018) and after (2019 and 2021) a forest fire inTaibon, Agordino area, Belluno Province, Italy. The forest fire occurred at the end of October 2018.</p> <p>Hansen Global Forest Cover map clipped to the Taibon area - see <a href="https://storage.googleapis.com/earthenginepartners-hansen/GFC-2020-v1.8/download.html">https://storage.googleapis.com/earthenginepartners-hansen/GFC-2020-v1.8/download.html</a></p> <p>Related reading:</p> <ul> <li><a href="https://www.int-arch-photogramm-remote-sens-spatial-inf-sci.net/XLIII-B3-2022/1115/2022/isprs-archives-XLIII-B3-2022-1115-2022.pdf">Leblon et al.2022</a></li> <li><a href="http://un-spider.org/advisory-support/recommended-practices/recommended-practice-burn-severity/in-detail/normalized-burn-ratio">UN dNBR web-page</a></li> <li><a href="http://atti.asita.it/Asita2005/Pdf/0453.pdf">Boschetti et al. 2005 </a></li> <li><a href="https://www.indexdatabase.de/db/i-single.php?id=53">Index database</a></li> </ul> <p> </p>
Calculation of R2 regression values after square root transformation of the data in intact condition of Haemaphysalis darjeeling
<p>Table: Calculation of R2 regression values after square root transformation of the data in intact condition of <em>Haemaphysalis darjeeling</em></p>
Automatic exhaustive calculations of large material space by Korringa-Kohn-Rostoker coherent approximation method --- Applied to equiatomic quaternary high entropy alloys
<p>Calculated data of equiatomic quaternary solid solution phase (high-entropy alloys) on local magnetic moment, total magnetization, magnetic phase transition temperature and residual resistivity.</p> <p>The data was added on October 28.</p>
Data for "Exploring Cesium-Tellurium phase space via high-throughput calculations beyond the generalized-gradient approximation"
<p>The AiiDA archives of the high-throughput calculations presented in the paper "Exploring Cesium-Tellurium Phase Space via High-Throughput Density-Functional Theory Calculations".</p> <ul> <li>"calc_mp_Cs-Te.aiida" contains the calculations of the structures originating from the Materials Project database.</li> <li>"calc_oqmd_Cs-Te.aiida" contains the calculations of the structures originating from the open quantum materials database.</li> <li>"calc_mp_Cs-Te_manipulated.aiida" contains the calculations of the structures derived from chemically similar structures originating from the Materials Project database.</li> <li>"calc_oqmd_Cs-Te_manipulated.aiida" contains the calculations of the structures derived from chemically similar structures originating from the open quantum materials database.</li> <li>"calc_Cs5Te3_experimental.aiida" contains the calculations of the additional experimental structure added to the dataset.</li> </ul>
BIOPEP-UWM: Calculations for top 20 abundant peptides from Cynara cardunculus swine blood hydrolysate FNF
<p>Calculations by BIOPEP (https://biochemia.uwm.edu.pl/biopep-uwm/) for top 20 abundant peptides from <em>Cynara cardunculus</em> swine blood hydrolysate FNF.</p>
TinyMT pre-calculated parameter list
<p>This archive contains TinyMT pseudo random number generated parameters, computed by tinymt32dc and tinymt64dc programs, where the first 1048576 keys for the 256 sets of id=0~255.</p> <p>The original GitHub archive is at <a href="https://github.com/jj1bdx/tinymtdc-longbatch">https://github.com/jj1bdx/tinymtdc-longbatch</a>. In this archive, the dataset is split into two parts for the tinymt32dc and tinymt64dc parameters. SHA512 checksums of each parameter files are added for the ease of verification. Kenji Rikitake has verified the contents in this archive and the GitHub archive have the same parameter contents.</p> <p>See <a href="http://www.math.sci.hiroshima-u.ac.jp/m-mat/MT/TINYMT/index.html">TinyMT web page</a> for the further details of the random number generation algorithm.</p> <p>Contributions, affiliations, and acknowledgments:</p> <p>Mutsuo Saito and Makoto Matsumoto are the creators of TinyMT algorithm. Kenji Rikitake contributed by conducting the parameter generation.</p> <p>The affiliation of Mutsuo Saito and Makoto Matsumoto in this archive are the ones in 2011, when TinyMT was first published. Kenji Rikitake's affiliation is as of January 2022. Rikitake's organizational affiliation in 2011 was with Kyoto University.</p> <p>Kenji Rikitake used the supercomputer service provided by Academic Center for Computing and Media Studies (ACCMS), Kyoto University, Japan, for generating the TinyMT generation parameters included in this archive, during November to December 2011 with the ACCMS <em>laurel</em> cluster. The computation of the entire archive took ~32 days. </p>
Machine learning models predict calculation outcomes with the transferability necessary for computational catalysis
<p>data files, including ML models of dynamic classifiers, trajectories of electronic structure and geometric features, optimized geometries, and final csv files.</p>
Impacts of using different standard populations in calculating age-standardized death rates when age-specific death rates in the populations being compared do not have a consistent relationship: A cross-sectional population-based observational study on US state HIV death rates
<p><strong>Objective</strong>: To examine if the rankings of state HIV age-standardized death rates (ASDRs) changed if different standard population (SP) was used.</p> <p><strong>Design</strong>:<strong> </strong>A cross-sectional population-based observational study. Setting 36 states in the United States.</p> <p><strong>Participants</strong>: People died from 2015 to 2019.</p> <p><strong>Main outcome measures</strong>: State HIV ASDR using 4 SPs, namely WHO2000, US2000, US2mor020, and Eur2011–2030.</p> <p><strong>Results</strong>: The rankings of 19 states did not change when ASDRs were calculated using US2000 and US2020. Of the 17 states whose rankings changed, the rankings of 9 states calculated using US2000 were higher than those calculated using US2020; in 8 states, the rankings were lower. The states with the greatest changes in rankings between US2000 and US2020 were Kentucky (12th and 9th, respectively) and Massachusetts (8th and 11th, respectively).</p> <p><strong>Conclusions</strong>: State ASDRs calculated using the current official SP (US2000) weigh middle-age HIV death rates more heavily than older-age HIV death rates, resulting in lower ASDRs among states with higher older-age HIV death rates.</p>
Dynamic deformation calculation of articular cartilage and cells using resonance-driven laser scanning microscopy - Osmotic Challenge and Validation Testing Dataset
<p>This archive contains 3-D image stacks obtained over time of articular cartilage undergoing osmotic swelling. These were acquired with a resonance scanning protocol, which allows for fast scanning but with decreased image quality. The Python package, resonant_lsm, was developed to segment and analyze the deformation of cells in such images. The archive also contains validation testing data of this software. Included README files document the archive contents and how to reproduce the analyses. </p>
Introduction of an Adhesion Factor to Cube in Cube Models and its Effect on Calculated Moduli of Particulate Composites
<p>The cube in cube approach was used by Paul and Ishai-Cohen to model and derive formulas for filler content dependent Young´s moduli of particle filled composites assuming perfect filler matrix adhesion. Their formulas were chosen because of their simplicity, recalculated using an elementary volume approach which transforms spherical inclusions to cubic inclusions. The EV approach led to expression for the composites moduli that allow for introducing an adhesion factor <em>k</em><sub>adh</sub> ranging from 0 and 1 to take into account none perfect reduced filler matrix adhesion. This adhesion factor scales the edge length of the cubic inclusions, thus, reducing the stress transfer area between matrix and filler. Fitting the experimental data with the modified Paul model provides reasonable <em>k</em><sub>adh</sub> for PA66, PBT, PP, PE-LD and BR which are in line with their surface energies. Further analysis showed that stiffening only occurs if <em>k</em><sub>adh</sub> exceeds <span class="math-tex">\( { \ \sqrt{E^M/E^F} \ }\)</span> and depends on the ratio of matrix modulus and filler modulus. The modified model allows for a quick calculation of any particle filled composites for known matrix modulus <em>E</em><sub>M</sub>, filler modulus <em>E</em><sub>F</sub>, filler volume content <em>v</em><sub>F</sub> and adhesion factor <em>k</em><sub>adh</sub>. Thus, finite element analysis (FEA) simulations of any particle filled polymer parts as well as materials selection are significantly eased. FEA of cubic and hexagonal EV arrangements show that stress distributions within the EV exhibit more shear stresses if one deviates from the cubic arrangement. At high filler contents the assumption that the property of the EV is representative for the whole composite, holds only for filler volume contents up to 15 or 20 % (corresponding to 30 to 40 weight %). Thus, for vast majority of commercially available particulate composites, the modified model can be applied. Furthermore, this indicates that the <em>cube in cube</em> approach reaches two limits: i) the occurrence of increasing shear stresses at filler contents above 20 % due to deviations of EV arrangements or spatial filler distribution from cubic arrangements (singular), and ii) increasing interaction between particles with the formation of particle network within the matrix violating the EV assumption of their homogeneous dispersion.</p>
mzhangrocks/HeFluxinSimao: Data files for He flux calculation in the Simao block
<p>This release archives the data files for He flux calculation in the Simao block.</p>
Calculations for: Detector dog work assessing probability of detection for Yellow crazy ant
<p class="MsoNormal">The use of detector dogs within environmental programs has increased greatly over the past few decades, yet their<span> </span><span>search methods are not standardised, and variation in dog performance remains not well quantified or understood. There is much science to be done to improve the general utility of detector dogs, especially for invertebrate surveys.</span></p> <p class="MsoNormal">We report research for detector dog work conducted as part of yellow crazy ant eradication. One dog was first used to quantify probability of detection (POD) within a strictly controlled trial. We then investigated the search patterns of two dogs when worked through sites using different transect spacings. Specifically we quantified their presence within set distances of all locations in each assessment area, as well as the time they took to assess each area. In a GIS we then calculated the relative percentage of the entire search area within six distance categories, and combined this information with the POD values to obtain a site-level POD.</p> <p class="MsoNormal">The calculated relationship between distance and POD was extremely strong (R<sup>2</sup> = 0.998), with POD being 86% at 2 m and 28% at 25 m. For site-level assessments conducted by the two dogs, both dogs achieved highest site-level POD when operated on the lowest transect spacing (15 m), with POD decreasing significantly as transect spacing increased. Both dogs had strong linear relationships between area assessed and time, with the area assessed being greater when the transects had greater spacing. The working style of the two dogs also resulted in significantly different assessment outcomes. In one hour one dog could assess approximately 9.2 ha with transects spaced 20m apart, and 6.8ha with transects spaced 15 m apart, whereas the second dog could only assess approximately 6.9 ha with transects spaced 20 m apart, and 4.9 ha with transects spaced 15 m apart.</p> <p class="MsoNormal">Our study provides insight into the ability of dogs to detect yellow crazy ants, and sets the basis for further science and protocol development for ant detection. With the lessons learnt from this work we then detail protocols for using detector dogs for ant eradication assessments.</p>
Dataset for deep-learning density functional theory Hamiltonian for efficient ab initio electronic-structure calculation
<p>Dataset files of atomic structures and Hamiltonian matrices of graphene, MoS<sub>2</sub>, bilayer graphene and bilayer bismuthene.</p> <p>Please note that the DFT results in this dataset were calculated using OpenMX. This means that if you want to use a DeepH model trained on this dataset to calculate properties, you need to use the <a href="https://github.com/mzjb/overlap-only-OpenMX">overlap calculated using OpenMX</a>. The orbital information required for overlap calculations can be found in the <a href="https://www.nature.com/articles/s43588-022-00265-6">paper</a>.</p>
Calculating bond dissociation energies of X-H (X = C, N, O, S) bonds of aromatic systems via DFT: A detailed comparison of methods
<p>In this study, the bond dissociation energy (BDE) values of X-H (X = C, N, O, S) bonds of aromatic compounds were computed by using 17 different DFT functionals, namely M08-HX, M06-2X, M05-2X, M06, M05, BMK, MPW1B95, B1B95, B98, B97-2, LC-wPBE, B3LYP, cam-B3LYP, B2PLYP, MPWB1K, BB1K, BB95, within the basis set range 6-31G(d), 6-31+G(d), 6-31+G(d,p), 6-311G(d,p) and 6-311++G(d,p). The results show that the 6-31G(d) is the most convenient basis set to perform the BDE calculations with sufficient accuracy compared to the relevant experimental BDEs. The M06-2X, M05-2X, and M08-HX functionals gave highly accurate BDE values (with the average mean unsigned error MUE = 1.2-1.5 kcal/mol), performing better than the other functionals. The results suggest that the M06-2X, M05-2X, and M08-HX density functionals in the combined DFT/6-311+G(3df,2p)//B3LYP/6-31G(d) model chemistry offer the best method for calculating BDEs of ArX-H (X = C, N, O, S) bonds.</p>
Data for "Insight into Ideal Shear Strength of Ni-based Dilute Alloys using First-Principles Calculations and Correlational Analysis"
<p><strong>Summary: </strong></p> <p>This dataset contains inputs, outputs, and analysis needed to replicate the results discussed in a published article. First-principles results were obtained through VASP and an external optimizer while the crystal plasticity finite element calculations were carried out by Abaqus and an existing subroutine. See the manuscript for more details.</p> <p><strong>Folders: </strong></p> <ul> <li>NiX_data-summary ("analysis" archive): a summary of the output of the DFT calculations, including plaintext and numpy binary versions of the elastic constants and ideal shear stresses.</li> <li>NiX_analysis ("analysis" archive): the data analysis scripts needed to reproduce correlation results (a separate calculation in Matlab) and plot figures.</li> <li>NiX_data-detailed ("data" archive): input files for three pre-strain conditions (0.00, 0.15, and 0.30) and all alloying elements, with common files being separated to a top-level folder of their own to limit repetition.</li> </ul> <p><strong>Article: </strong></p> <p>Published: <a href="https://doi.org/10.1016/j.commatsci.2022.111564">10.1016/j.commatsci.2022.111564</a></p> <p>@article{shimanek2022NiX, title = {Insight into ideal shear strength of Ni-based dilute alloys using first-principles calculations and correlational analysis}, journal = {Computational Materials Science}, volume = {212}, pages = {111564}, year = {2022}, issn = {0927-0256}, doi = {https://doi.org/10.1016/j.commatsci.2022.111564}, author = {John D. Shimanek and Shun-Li Shang and Allison M. Beese and Zi-Kui Liu}}</p> <p>Preprint: <a href="https://doi.org/10.48550/arXiv.2108.06412">10.48550/arXiv.2108.06412</a></p>
Calculation of CPSD curves based on time-varying suspension pressure for selected soils
<p>This is a dataset for publication <em>Equation for determining cumulative particle size distribution using the pressure of a sedimenting suspension</em></p>
Pyrene fluorescence data obtained by nonadiabatic dynamics calculations
<p> </p> <p>The dataset includes all trajectories of the nonadiabatic molecular dynamics simulations of pyrene. Each tar.gz directory contains two directories: INPUT and RESULTS.</p> <p>In the INPUT directory, one has the input files for the Newton-X dynamics calculations and the subdirectory JOB_AD with the inputs for the ADC(2) calculations with TURBOMOLE. One also has the files "final_output.1.2" and "final_output.1.3" with the data used to obtain the emission spectrum.</p> <p>In the RESULTS directory, one has the 20 trajectories for the S2 state and 52 trajectories initiated in S7-S8. For the latter, the trajectories numbered 1-32 started in S7, and those numbered 33-52 started in S8. One also has a directory called TRAJ1_uncorrected that corresponds to the data for TRAJ1 without the kinetic energy correction. The RESULTS directory contains all the output files from the Newton-X dynamics calculation, including the file dyn.out with the atomic coordinates, velocities, and energies for each time step. There is also a file called "get_points.py," a python script used to extract the data (from the dyn.out files) for the emission spectrum.</p>
SUMMIT's pre-calculated weight files
<p>This repository includes SUMMIT's models of gene expression in whole blood for use in transcriptome-wide association studies.</p> <p><strong>REFERENCES</strong></p> <p>Please cite the following: </p> <p>Zhang, Z., Bae, Y. E., Bradley, J. R., Wu, L., & Wu, C. (2021). SUMMIT: An integrative approach for better transcriptomic data imputation improves causal gene identification. <em>medRxiv</em>.</p>
Calculation results for "Atmospheric oxidation of imine derivative of piperazine initiated by OH radical"
<p>Results from quantum chemical calculations done for publication titled "Atmospheric oxidation of imine derivative of piperazine initiated by OH radical".</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.