Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,155
datasets available to search
ShareScore release 0.9.0
Dataset results
5,155 results for “resolution”
ISEE 1 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
ISEE-1 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
LANL1997 Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 1997-97A MPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 87 s resolution. These parameters include universal time, denisty, velocity, and temperature for both low and high energy ions and electrons as well as position information and instrument status flags.
IMP-8 PLS Solar Wind Weimer Propagated 60 s Resolution Data in GSE Coordinates
IMP-8 PLS propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
Taloyoak THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Taloyoak (69.54 deg GLat, 266.45 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
LANL 1991 Geosynchronous Orbit Particle Analyzer (SOPA) at 60 sec Resolution in Spacecraft Coordinates
The LANL 1991-080 SOPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 60 s resolution. These parameters include universal time, spacecraft location, electron and on density, electron and on temperature, electron and ion particle flux, electron and ion energies, electron and ion rangies, and data quality flags.
Geotail Solar Wind Weimer Propagation Details at 1 min Resolution
Geotail Weimer propagated solar wind data using CPI and linearly interpolated time delay, cosine angle, and goodness information of propagated data at 1 min Resolution. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
LANL1994Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 1994-084 MPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 87 s resolution. These parameters include universal time, denisty, velocity, and temperature for both low and high energy ions and electrons as well as position information and instrument status flags.
ISEE 1 Linearly Interpolated 60 s Resolution Fast Plasma Experiment data in GSM Coordinates
ISEE-1 Fast Plasma Experiment data linearly interpolated to have the measurements on the minute at 60 s resolution data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Geotail Solar Wind Weimer Propagation Details at 1 min Resolution
Geotail Weimer propagated solar wind data using LEP and linearly interpolated time delay, cosine angle, and goodness information of propagated data at 1 min Resolution. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
Inuvik THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Inuvik (68.41 deg GLat, 226.23 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
IMP-8 Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates
IMP-8 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution Tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
MRO MARS HIGH RESOLUTION IMAGE SCIENCE EXPERIMENT EDR V1.0
This data set includes the Experimental Data Records from the HiRISE instrument on MRO. These products are the permanent record of the raw images obtained by the HiRISE Instrument and contain the properties of unprocessed and unrectified imaging maintaining the original spacecraft viewing orientation and optical distortion properties. .
Whitehorse THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at White Horse (61.01 deg GLat, 224.78 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
Voyager 1 Plasma Spectrometer (PLS) Faraday Cups A-D Low Energy Resolution Current Ion Spectra, L Mode, for Proton Energies from 10 eV to 5950 eV, 96 s Data
These Ion Current Spectra in the Jovian Magnetosphere are from the Plasma Spectrometer (PLS) Instrument on Voyager 1 during March 1979 Flyby of Jupiter. The Instrument has four Faraday Cups A, B, C, and D, the Electron Data come only from Faraday Cup D. The Data are specified in Terms of Current per Faraday Cup in femto-amperes (10^-15 A equals 1 fA) versus Channel Number and Energy (eV). This Data Set is for the PLS L Mode covering Proton (H+ Ion) Energies from 10 eV to 5950 eV at Low Energy Resolution in 16 logarithmic Energy Channels. The PLS Instrument samples only one Mode of Electron (E1, E2) or Ion (L, M) Spectra in each Time Interval, so the L Mode Data are not continuous but consecutive with the other Modes in Time. Reference: Bridge, H.S., Belcher, J.W., Butler, R.J., Lazarus, A.J., Mavretic, A.M., Sullivan, J.D., Siscoe, G.L., and V.M. Vasyliunas, The Plasma Experiment on the 1977 Voyager Mission, Space Sci. Rev., 21, 259-287, 1977.
APOLLO 12 ALSEP/SWS SOLAR WIND 28-SEC RESOLUTION TABLES V1.0
This data set contains daily tables of time ordered, 28-second-resolution plasma parameters, mainly of the solar wind, as observed on the Moon at the Apollo 12 ALSEP site by the Apollo 12 Solar Wind Spectrometer from 19 November 1969 through 25 March 1976.
Snap Lake THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Snap Lake (63.58 deg GLat, 249.13 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
ISEE 2 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
ISEE-2 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Pinawa THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Pinawa (50.20 deg GLat, 263.96 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
MGS MARS/MOONS MAG/ER PRE-MAP MAG FULL WORD RESOLUTION V1.0
This data set contains vector magnetic field data acquired by the Fluxgate section of the Magnetometer / Electron Reflectometer instrument aboard the Mars Global Surveyor (MGS) spacecraft. The data are provided at a variable time resolution depending on the telemetry rate available to the investigation for the time period beginning with Aerobraking Phase 1A (1997-09-12). The data in the dataset cover the entire premapping period (ends 1999-03-08).
ACE Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates
ACE linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.