Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,155
datasets available to search
ShareScore release 0.9.0
Dataset results
5,155 results for “resolution”
Polar Electric Fields Instrument (EFI), Spacecraft Potential and Plasma Density, Spin Resolution
This data consists of the Spacecraft Potential and the Plasma Density, at spacecraft spin resolution, where the Plasma Density is obtained as a function, provided by Dr. Jack Scudder, the PI of the POLAR Hydra investigation. This function was determined by a fit to the POLAR Hydra particle data for 2001/04/01. The relative accuracy of the Plasma Density, estimated from the spacecraft potential on short time scales is ~10-30% depending on plasma conditions. The absolute accuracy is better than a factor of two for densities less than about 20 particles/cm^3. Density values greater than 30 particles/cm^3 are not plotted because they are inaccurate due to the steep slope of the curve of density versus spacecraft potential. If the value of the argument to the function is too large, then the Plasma Density is set to a filler value of 1.0e+20. Also, if the value returned by the function is too large, then the result is not reliable, and therefore the Plasma Density is set to a filler value of 1.0e+20. If the value of the argument to the function is too small, then the Plasma Density is set to a filler value of 1.0e-20. So, a value of the Plasma Density is a filler value if and only if it is either larger than 1.0e+2 (100.0) or smaller than 1.0e-4 (0.0001); otherwise, it is a true value. Note that all values of the Spacecraft Potential are true values. There is no filler.
Kiana THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Kiana (66.97 deg GLat, 199.56 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
Kapuskasing THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Kapuskasing (49.39 deg GLat, 277.68 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
IMP-8 Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
IMP-8 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies. References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
ISEE 1 Fast Plasma Experiment Solar Wind Weimer Propagated 60 s Resolution Data in GSM Coordinates
ISEE-1 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution FPE data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
ISEE 2 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates
ISEE-2 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
ISEE 1 Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
ISEE-1 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies. References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
GALILEO JUPITER RDR FULL RESOLUTION PLASMA DATA V1.0
This data set contains raw data from the Plasma Science instrument (PLS) on the Galileo spacecraft for all Jupiter orbits. These data have been reformatted into ASCII tables to facilitate data processing and analysis.
Narsarsuaq THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Narsarsuaq (61.16 deg GLat, 314.56 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
APOLLO 15 ALSEP/SWS SOLAR WIND 28-SEC RESOLUTION TABLES V1.0
This data set contains daily tables of time ordered, 28-second-resolution plasma parameters, mainly of the solar wind, as observed on the Moon at the Apollo 15 ALSEP site by the Apollo 15 Solar Wind Spectrometer from 31 July 1971 through 30 June 1972.
Chibougamau THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Chibougamau (49.81 deg GLat, 285.58 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
Voyager 2 Plasma Spectrometer (PLS) Faraday Cups A-D High Energy Resolution Current Ion Spectra, M Mode, for Proton Energies from 10 eV to 5950 eV, 96 s Data
These Ion Current Spectra in the Jovian Magnetosphere are from the Plasma Spectrometer (PLS) Instrument on Voyager 2 during July 1979 Flyby of Jupiter. The Instrument has four Faraday Cups A, B, C, and D, the Electron Data come only from Faraday Cup D. The Data are specified in Terms of Current per Faraday Cup in femto-amperes (10^-15 A equals 1 fA) versus Channel Number and Energy (eV). This Data Set is for the PLS M Mode covering Proton (H+ Ion) Energies from 10 eV to 5950 eV at High Energy Resolution in 128 logarithmic Energy Channels. The PLS Instrument samples only one Mode of Electron (E1, E2) or Ion (L, M) Spectra in each Time Interval, so the M Mode Data are not continuous but consecutive with the other Modes in Time. Reference: Bridge, H.S., Belcher, J.W., Butler, R.J., Lazarus, A.J., Mavretic, A.M., Sullivan, J.D., Siscoe, G.L., and V.M. Vasyliunas, The Plasma Experiment on the 1977 Voyager Mission, Space Sci. Rev., 21, 259-287, 1977.
Polar Plasma Wave Instrument (PWI), Low Frequency Waveform Receiver, ~0.01 sec resolution fields
The Low-Frequency Waveform Receiver (LFWR) is designed to provide an extension of the High Frequency Waveform Receiver into the frequency range below 25 Hz. The LFWR consists of six parallel low-pass filters connected to the three orthogonal electric field sensors and to the triaxial search coils. The input signals are band limited to a frequency range from 0.1 to 25 Hz and are sam- pled by a 12-bit analog-to-digital converter. The six LFWR channels are sampled simultaneously at a rate of 100 samples s-1. The dynamic range of the LFWRis approximately 72 dB with fixed gain. An FFT on 256 or 464 values, depending on the snapshot size, was used in calibrating the data; i.e., perform FFT, calibrate andin frequency domain, perform inverse FFT to get calibrated time series. Coordinate System Used: local magnetic field-aligned, a spacecraft centered coordinate system where Z is parallel to the local B-field determined from Polar MFE, X points outward and lies in the plane defined by the Z-axis and the radial vector from the earth to the spacecraft, and Y completes a right-handed system and points eastward. The X- and Z-axes are contained in the north-south plane. The three orthogonal magnetic field components are given in units of nT/Sec rather than nT because the response of the searchcoils across the passband is not flat. In order to obtain units of nT, the data would need to be digitally filtered to the frequency of interest and then integrated over time. Integrating over the entire passband could possibly destroy the resolution of the higher frequency components since the low frequency noise, if present, will dominate. Data are bandpass filtered. The valid range of data in the frequency domain is from 0.5 to 22.5 Hz. Reference:..Gurnett, D.A. et al, The Polar plasma wave instrument, Space Science Reviews, Vol. 71, pp. 597-622, 1995.
VEGA1 INFRARED SPECTROMETER HIGH RESOLUTION DATA V1.0
The IKS data from Vega-1 came in various forms. The initial submission from IKI by Dyachkov was in GROUP FITS (binary) for the 'imaging channel'. A separate submission came through the IHW Infrared Studies Discipline and also contained data presented in the FITS format (IHW keywords) for the two 'infrared channels'. In the former case, the three Pvalues carried information on the distance and two angles used to locate the position of the comet on the slit. The other simple keyword values marked only the date, mission, and experiment. The latter data, had not only 101 individual spectra for the 3-5 micron measurements but a composite 'final' 6-12 micron spectrum with associated 'figure 7' from the published results (COMBES, M. et al. 1988, Icarus, 76, 404). For these 101 spectra a cometo-centric distance was quoted rather than a time micron data. Using this information, the distance range was 270534.9 to 39273.22 km. From this comparison, it is inferred that the distance quoted in the IKI submission is also cometo-centric (31596.0 to 16092 km)
Yellowknife THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Yellowknife (62.52 deg GLat, 245.69 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
Fort Simpson THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Fort Simpson (61.76 deg GLat, 238.77 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
Sanikiluaq THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Sanikiluaq (56.54 deg GLat, 280.77 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
LANL 2002 Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 02A MPA data set contains numerical moments computed from measurements of the Los Alamos Magnetospheric Plasma Analyzer (MPA) [Bame et al., Rev. Sci. Inst., in press 1993]. The moments are presented in s/c coordinates: the z-axis is aligned with the spin axis, which points radially toward the center of the Earth; the x-axis is in the plane containing the spacecraft spin axis and the spin axis of the Earth, with +X generally northward; and the y-axis points generally eastward. Polar angles are measured relative to the spin axis (+Z), and azimuthal angles are measured around the z-axis, with zero along the +X direction. The moments are computed for three 'species': lop (low-ener. ions, ~1eV/e-~130eV/e); hip (hi-ener. ions, ~130eV/e-~45keV/e); alle (electrons, ~30eV - ~45keV ). The electron measurements are obtained 21.5 secs after the ion measurements. Epoch is the measurement time appropriate for the ions. The moments are computed after the fluxes are corrected for background and s/c potential. Algorithms for these corrections are relatively unsophisticated, so the moments are suspect during times of high background and/or high spacecraft potential. Because the determined spacecraft potential is not very precise, the magnitude of the low-energy ion flow velocity is probably not accurate, but the flow direction is well determined. Tperp and Tpara are obtained from diagonalization of the 3-dimensional temperature matrix, with the parallel direction assigned to the eigenvalue which is most different from the other two. The corresponding eigenvector is the symmetry axis of the distribution and should be equivalent to the magnetic field direction. The eigenvalue ratio Tperp/Tmid, which is provided for each species, is a measure of the symmetry of the distribution and should be ~1.0 for a good determination. Several of the parameters have a fairly high daily dynamic range and for survey purposes are best displayed logarithmically. These parameters are indicated by non-zero 'SCALEMIN' values in this file. A quality flag value of 1 indicates that the values are suspect because of unreliable location info.
MGS MARS/MOONS MAG/ER MAPPING MAG FULL WORD RESOLUTION V1.0
This data set contains vector magnetic field data acquired by the Fluxgate section of the Magnetometer / Electron Reflectometer instrument aboard the Mars Global Surveyor (MGS) spacecraft. The data are provided at a variable time resolution depending on the telemetry rate available to the investigation for the time period beginning with the prime mission mapping (1999-03-08). The data in the dataset cover the entire mapping time period.
IRAS LOW RESOLUTION ZODIACAL HISTORY FILE V1.0
The IRAS Low-Resolution (0.5 degree in-scan) Zodiacal Observational History File (ZOHF) consists of the time-ordered IRAS survey data averaged into 1/2 X 1/2 degree rectangular pixels along with pointing and timing information, covering the entire mission.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.