Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5,155
datasets available to search
ShareScore release 0.9.0
Dataset results
5,155 results for “resolution”
The Pas THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at The Pas (53.99 deg GLat, 259.06 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
VG2 LECP 0.4S HIGH RESOLUTION URANUS FAR ENCOUNTER DATA
This far encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 2 while the spacecraft was within the vicinity of Uranus. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. During Uranus far encounter, the entire LEPT (Low Energy Particle Telescope) and part of the LEMPA (Low Energy Magnetospheric Particle Analyzer) subsystems were turned on for data collection. Particles include electrons, protons, alpha particles, and light, medium, and heavy nuclei particles. The far encounter data are 0.4 second rate measurements within 1/8 of the LECP instrumental motor rotation period (the angular scanning periods, or step period).
VG2 LECP 0.4S HIGH RESOLUTION SATURN FAR ENCOUNTER DATA
This far encounter data set consists of electron and ion counting rate data from the Low Energy Charged Particle (LECP) experiment on Voyager 2 while the spacecraft was within the vicinity of Saturn. This instrument measures the intensities of in-situ charged particles ( >13 keV electrons and >24 keV ions) with various levels of discrimination based on energy range and mass species. A subset of almost 100 LECP channels are included in this data set. The LECP data are globally calibrated to the extent possible. During Saturn far encounter, the entire LEPT (Low Energy Particle Telescope) and part of the LEMPA (Low Energy Magnetospheric Particle Analyzer) subsystems were turned on for data collection. Particles include electrons, protons, alpha particles, and light, medium, and heavy nuclei particles. The far encounter data are 0.4 second rate measurements within 1/8 of the LECP instrumental motor rotation period (the angular scanning periods, or step period).
IMP-8 Linearly Interpolated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSE Coordinates
IMP-8 linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
ISEE 2 Fast Plasma Experiment Linearly Interpolated 60 s Resolution data in GSM Coordinates
ISEE-2 Fast Plasma Experiment linearly interpolated to have the measurements on the minute at 60 s resolution data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
LANL 1989 Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 1989-046 MPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 87 s resolution. These parameters include universal time, denisty, velocity, and temperature for both low and high energy ions and electrons as well as position information and instrument status flags.
Fort Smith THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Fort Smith (60.03 deg GLat, 248.07 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
ISEE 1 Weimer Propagated 60 s Resolution Tri-axial Fluxgate Magnetometer in GSM Coordinates
ISEE-1 Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution tri-axial fluxgate magnetometer data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
Polar Plasma Wave Instrument (PWI), Wideband Receiver (WBR) 4.016 microsecond resolution
PWI>Plasma Wave Instrument Reference: Gurnett, D.A. et al, The Polar Plasma Wave Instrument, Space Science Reviews, Vol. 71, pp. 597-622, 1995. donald-gurnett@uiowa.edu An FFT on 1992 values was used in calibrating the data; i.e., perform FFT, calibrate in frequency domain, perform inverse FFT to get calibrated time series. Coordinate system used: antenna coordinate system, where the u-axis is offset by -45 degrees from the spacecraft x-axis, the v-axis is offset by -45 degrees from the spacecraft y-axis, and the z-axis is identical to the spacecraft z-axis. The effective noise bandwidth is the data sampling frequency divided by the size of the FFT (number of input samples) multiplied by 1.5 to to correct for the effects of a Hanning window applied to the time- domain samples. Hence, the effective noise bandwidth is 1.5 * delta_f. These data come in snapshots of 1992 or 3984 points every 0.064 seconds. Duration of a snapshot is less when the instrument is in duty cycle modes. Since Epoch time is in milliseconds, the times for the data points will not be unique unless the fmsec (fraction of milliseconds) is appended to the Epoch0 time for that point. The frequency filters used for the wideband receiver have a range that limits the calibration. The following table specifies the range of frequencies for which the calibration is certified. Outside this range the amplitude values may be in error and should not be used. +------------------------------------------------+ Translation Filter Freq Range ------------------------------------------------ 0 kHz 90 kHz 7.5 kHz- 90.0 kHz 125 kHz 90 kHz 131.9 kHz-214.8 kHz 250 kHz 90 kHz 254.3 kHz-341.2 kHz 500 kHz 90 kHz 504.79 kHz-591.1 kHz 0 kHz 10 kHz 0.035 kHz- 11.64 kHz 0 kHz 22 kHz 0.065 kHz- 21.59 kHz 0 kHz 1-3 kHz 1.0 kHz- 3.0 kHz 0 kHz 3-6 kHz 3.0 kHz- 6.0 kHz +------------------------------------------------+ The cadence value given here is computed from the inverse of the sampling rate (249 kHz). For a description of the PWI receivers and the different operational modes see: http://www-pw.physics.uiowa.edu/plasma-wave/istp/polar/modes.html
IMP-8 Linearly Interpolated 60 s Resolution PLS data in GSM Coordinates
IMP-8 linearly interpolated to have the measurements on the minute at 60 s resolution PLS data in GSM coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
LANL 1990 Geosynchronous Orbit Particle Analyzer (SOPA) at 60 sec Resolution in Spacecraft Coordinates
The LANL 1990-095 SOPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 60 s resolution. These parameters include universal time, spacecraft location, electron and on density, electron and on temperature, electron and ion particle flux, electron and ion energies, electron and ion rangies, and data quality flags.
LANL 1997 Geosynchronous Orbit Particle Analyzer (SOPA) at 60 sec Resolution in Spacecraft Coordinates
The LANL 1997-97A SOPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 60 s resolution. These parameters include universal time, spacecraft location, electron and on density, electron and on temperature, electron and ion particle flux, electron and ion energies, electron and ion rangies, and data quality flags.
IMP-8 Linearly Interpolated 60 s Resolution PLS data in GSE Coordinates
IMP-8 linearly interpolated to have the measurements on the minute at 60 s resolution PLS data in GSE coordinates. This data set consists of processed solar wind data that has been linearly interpolated to 1 min resolution at the position of the spacecraft using the interp1.m function in MATLAB. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies and cross correlation studies on solar wind.
Voyager 2 Plasma Spectrometer (PLS) High Resolution Plasma Density, Thermal Speed, and Velocity (RTN) Data in CDF Format
Voyager 2 High-Resolution Plasma Data. The files in this directory contain the Voyager fine resolution plasma data. The plasma parameters are obtained by finding the best fit of a convected isotropic Maxwellian distribution to the data. One sigma errors are typically less than 0.5% in the speed and VR, less than 5% for the density and thermal speed, and vary greatly for VT and VN. Sampling times range from 12 to 192 sec., with sampling generally more frequent early in the mission. The velocity components are given in the RTN coordinate system, where R is radially outward, T is in a plane parallel to the solar equatorial plane and positive in the direction of solar rotation, and N completes a right-handed system. Warning: the V_t and V_n parameters are often not reliable after 1989. Please consult with us, or at least send preprints, when you use these data to prevent grievous errors or misconceptions, John Richardson, jdr@space.mit.edu.
IMP-8 PLS Solar Wind Weimer Propagated 60 s Resolution Data in GSM Coordinates
IMP-8 PLS Weimer propagated solar wind data and linearly interpolated to have the measurements on the minute at 60 s resolution data in GSM coordinates. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
LANL1991 Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 1991-080 MPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 87 s resolution. These parameters include universal time, denisty, velocity, and temperature for both low and high energy ions and electrons as well as position information and instrument status flags.
Kuujjuaq THEMIS Ground-based All Sky Imager; Full Resolution Images.
THEMIS Ground All Sky Imager at Kuujjuaq (58.10 deg GLat, 291.60 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.
ACE Solar Wind Weimer Propagation Details at 1 min Resolution
ACE Weimer propagated solar wind data and linearly interpolated time delay, cosine angle, and goodness information of propagated data at 1 min Resolution. This data set consists of propagated solar wind data that has first been propagated to a position just outside of the nominal bow shock (about 17, 0, 0 Re) and then linearly interpolated to 1 min resolution using the interp1.m function in MATLAB. The input data for this data set is a 1 min resolution processed solar wind data constructed by Dr. J.M. Weygand. The method of propagation is similar to the minimum variance technique and is outlined in Dan Weimer et al. [2003; 2004]. The basic method is to find the minimum variance direction of the magnetic field in the plane orthogonal to the mean magnetic field direction. This minimum variance direction is then dotted with the difference between final position vector minus the original position vector and the quantity is divided by the minimum variance dotted with the solar wind velocity vector, which gives the propagation time. This method does not work well for shocks and minimum variance directions with tilts greater than 70 degrees of the sun-earth line. This data set was originally constructed by Dr. J.M. Weygand for Prof. R.L. McPherron, who was the principle investigator of two National Science Foundation studies: GEM Grant ATM 02-1798 and a Space Weather Grant ATM 02-08501. These data were primarily used in superposed epoch studies References: Weimer, D. R. (2004), Correction to ‘‘Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique,’’ J. Geophys. Res., 109, A12104, doi:10.1029/2004JA010691. Weimer, D.R., D.M. Ober, N.C. Maynard, M.R. Collier, D.J. McComas, N.F. Ness, C. W. Smith, and J. Watermann (2003), Predicting interplanetary magnetic field (IMF) propagation delay times using the minimum variance technique, J. Geophys. Res., 108, 1026, doi:10.1029/2002JA009405.
LANL1990 Magnetospheric Plasma Analyzer (MPA) at 87 sec Resolution in Spacecraft Coordinates
The LANL 1990-095 MPA data set contains various parameters in a variety of coordinates systems including GEI, spacecraft, polar geographic, and polar magnetic coordinates at about 87 s resolution. These parameters include universal time, denisty, velocity, and temperature for both low and high energy ions and electrons as well as position information and instrument status flags.
Voyager 1 Plasma Spectrometer (PLS) Faraday Cups A-D High Energy Resolution Current Ion Spectra, M Mode, for Proton Energies from 10 eV to 5950 eV, 96 s Data
These Ion Current Spectra in the Jovian Magnetosphere are from the Plasma Spectrometer (PLS) Instrument on Voyager 1 during March 1979 Flyby of Jupiter. The Instrument has four Faraday Cups A, B, C, and D, the Electron Data come only from Faraday Cup D. The Data are specified in Terms of Current per Faraday Cup in femto-amperes (10^-15 A equals 1 fA) versus Channel Number and Energy (eV). This Data Set is for the PLS M Mode covering Proton (H+ Ion) Energies from 10 eV to 5950 eV at High Energy Resolution in 128 logarithmic Energy Channels. The PLS Instrument samples only one Mode of Electron (E1, E2) or Ion (L, M) Spectra in each Time Interval, so the M Mode Data are not continuous but consecutive with the other Modes in Time. Reference: Bridge, H.S., Belcher, J.W., Butler, R.J., Lazarus, A.J., Mavretic, A.M., Sullivan, J.D., Siscoe, G.L., and V.M. Vasyliunas, The Plasma Experiment on the 1977 Voyager Mission, Space Sci. Rev., 21, 259-287, 1977.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.