Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,580

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,580 results for “V2”

Learn how ShareScore rates datasets ↗
nasa28/100

MASTER: Airborne Science, western US, August, 2001, V2

This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected during 11 flights aboard a DOE B-200 aircraft over California, Nevada, Oregon, and Washington, U.S., on 2001-08-22 to 2001-08-31. This deployment was coordinated by the U.S. Department of Energy's Remote Sensing Laboratory (RSL) located at Nellis Air Force Base near Las Vegas, Nevada. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 20-meter spatial resolution. The L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

GLDAS Noah Land Surface Model L4 3 hourly 1.0 x 1.0 degree Early Product V2.1 (GLDAS_NOAH10_3H_EP) at GES DISC

NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is an Early Product for GLDAS-2.1 Noah 1.0 degree 3-hourly dataset. The 3-hourly data product was simulated with the Noah Model 3.6 in Land Information System (LIS) Version 7. The data product contains 36 land surface fields from January 2000 to present.The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards.The GLDAS-2.1 products supersede their corresponding GLDAS-1 products.The GLDAS-2.1 data are archived and distributed in NetCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST NOAA/STAR Metop-A AVHRR FRAC ACSPO v2.80 0.02 L3U Dataset (GDS v2)

This L3U (Level 3 Uncollated) dataset contains global daily Sea Surface Temperature (SST) on a 0.02 degree grid resolution. It is produced by the National Oceanic and Atmospheric Administration (NOAA) Advanced Clear Sky Processor for Ocean (ACSPO) using L2P (Level 2 Preprocessed) product acquired from the Meteorological Operational satellite A (Metop-A) Advanced Very High Resolution Radiometer 3 (AVHRR/3) (https://podaac.jpl.nasa.gov/dataset/AVHRRF_MA-STAR-L2P-v2.80 ) in Full Resolution Area Coverage (FRAC) mode as input. It is distributed as 10-minute granules in netCDF-4 format, compliant with the Group for High Resolution Sea Surface Temperature (GHRSST) Data Specification version 2 (GDS2). There are 144 granules per 24-hour interval. Fill values are reported in all invalid pixels, including land pixels with >5 km inland. For each valid water pixel (defined as ocean, sea, lake or river), and up to 5 km inland, the following major layers are reported: SSTs and ACSPO clear-sky mask (ACSM; provided in each grid as part of l2p_flags, which also includes day/night, land, ice, twilight, and glint flags). Only input L2P SSTs with QL=5 were gridded, so all valid SSTs are recommended for the users. Per GDS2 specifications, two additional Sensor-Specific Error Statistics layers (SSES bias and standard deviation) are reported in each pixel with valid SST. Ancillary layers include wind speed and ACSPO minus reference Canadian Meteorological Centre (CMC) Level 4 (L4) SST. The ACSPO Metop-A AVHRR FRAC L3U product is monitored and validated against iQuam in situ data (Xu and Ignatov, 2014) in the NOAA SST Quality Monitor (SQUAM) system (Dash et al, 2010). SST imagery and clear-sky mask are evaluated, and checked for consistency with L2P and other satellites/sensors SST products, in the NOAA ACSPO Regional Monitor for SST (ARMS) system. More information about the dataset is found at AVHRRF_MA-STAR-L2P-v2.80 and in (Pryamitsyn et al., 2021).

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: AQUA AIRS IR + MW Level 2 CLIMCAPS: Atmosphere, cloud and surface geophysical state V2 (SNDRAQIML2CCPRET) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.

restrictednotspecifiedApr 2025View details →
nasa28/100

HLS Sentinel-2 Multi-spectral Instrument Vegetation Indices Daily Global 30 m V2.0

The Harmonized Landsat and Sentinel-2 (HLS) project provides consistent data products from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 and Landsat 9 satellites and the Multi-Spectral Instrument (MSI) aboard Europe’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The combined measurement enables global observations of the land every 2–3 days at 30 meter (m) spatial resolution. The HLSS30 Vegetation Indices (HLSS30_VI) product is derived from Sentinel-2A, Sentinel-2B, and Sentinel-2C MSI data products. Vegetation indices combine specific bands of satellite data to quantify various aspects of vegetation. Analysis of vegetation indices allows for tracking changes in vegetation over time, identifying areas of stress or deforestation, and assessing crop health. Vegetation indices provide a reliable and efficient means of understanding the complex dynamics of vegetation health. The HLSS30_VI and HLSL30_VI products are gridded to the same resolution and Military Grid Reference System ([MGRS](https://hls.gsfc.nasa.gov/products-description/tiling-system/)) tiling system and thus are “stackable” for time series analysis.The HLSS30_VI product is provided in Cloud Optimized GeoTIFF (COG) format, and each band is distributed as a separate file. Nine indicators of vegetation health are included in the HLSS30_VI product: Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Soil Adjusted Vegetation Index (SAVI), Modified Soil Adjusted Vegetation Index (MSAVI), Normalized Difference Moisture Index (NDMI), Normalized Difference Water Index (NDWI), Normalized Burn Ratio (NBR), Normalized Burn Ratio 2 (NBR2), and Triangular Vegetation Index (TVI). See the User Guide for a more detailed description of the individual vegetation health variables provided in the HLSS30_VI product.

restrictednotspecifiedApr 2025View details →
nasa28/100

Delta-X: Acoustic Doppler Current Profiler Channel Surveys, MRD, Louisiana, 2021, V2

This dataset provides river discharge measurements collected at selected locations in the Atchafalaya and Terrebonne Basins within the Mississippi River Delta (MRD) floodplain in coastal Louisiana, USA. The measurements were made during the Delta-X 2021 field efforts from 2021-03-25 to 2021-04-11 (spring) and 2021-08-16 to 2021-09-25 (fall). Channel surveys were conducted with a Teledyne RiverPro acoustic doppler current profiler (ADCP) or a Sontek M9 RiverSurveyor ADCP on selected wide channels (>100 m wide) and a few selected narrow channels (approximately 10 m wide) near the Delta-X intensive study sites. River discharge was measured on cross-channel transects. Reported data include bathymetry, discharge (m3 s-1), and flow velocity.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: Jornada and Sevilleta, Southwestern US, October, 2002, V2

This dataset includes Level 1B (L1B) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected during nine flights aboard a DOE B-200 aircraft over Arizona, California, Nevada and New Mexico, U.S., on 2002-10-01 to 2002-10-08. Flights included coverage of the Jornada Experimental Range (JORNEX) in New Mexico. This deployment was coordinated by the U.S. Department of Energy's Remote Sensing Laboratory (RSL) located at Nellis Air Force Base near Las Vegas, Nevada. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 15-meter spatial resolution. The L1B file format is HDF-4. In addition, the dataset includes flight paths, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

NLDAS Secondary Forcing Data L4 Hourly 0.125 x 0.125 degree V2.0 (NLDAS_FORB0125_H) at GES DISC

This data set contains the secondary forcing hourly data "File B" for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from Jan 1979 to the present. The temporal resolution is hourly. The file format isnetCDF (converted from the GRIB data files).The non-precipitation land surface forcing fields for NLDAS-2 are derived from the analysis fields of the NCEP North American Regional Reanalysis (NARR). NARR analysis fields are 32-km spatial resolution and 3-hourly temporal frequency. Those NARR fields that are utilized to generate NLDAS-2 forcing fields are spatially interpolated to the finer resolution of the NLDAS 1/8th-degree grid and then temporally disaggregated to the NLDAS hourly frequency. NLDAS-2 is providing a second forcing file, "File B", in which the surface temperature, humidity, and wind fields are represented not at 2-meters and 10-meters above the height of the NLDAS terrain, but rather at the same height above the NLDAS terrain as the height above the NARR terrain of the lowest prognostic level of the NARR assimilation system (namely, the same height above the model terrain as the lowest prognostic level of the mesoscale Eta model, which is the assimilating model in NARR). The surface downward surface radiation field in "File B" is taken directly from NARR, without any bias correction. The precipitation and convective precipitation fields in "File B" are also taken directly from NARR, and are used to calculate the convective fraction provided in "File A". The aerodynamic conductance is "File B" is also taken from NARR.The hourly land surface forcing fields for NLDAS-2 are grouped into two files, "File A" and "File B". "File B" is the secondary (optional) forcing file and contains ten meteorological forcing fields. Details about the generation of the NLDAS-2 forcing datasets can be found in Xia et al. (2012).

restrictednotspecifiedApr 2025View details →
nasa28/100

CAR SKUKUZA BRDF Measurements L1 V2 (CAR_SKUKUZA_BRDF) at GES DISC

CAR mission Skukuza measured bidirectional reflection functions over different natural surfaces and ecosystems in southern Africa. The measurements were conducted to characterize surface anisotropy in support of the CAR SAFARI mission and to validate products from NASA's Earth Observing System satellites.This data set consists of observations made with the CAR instrument and includes values for bidirectional reflectance factor at varying spectral bands.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: Aqua AIRS Level-1B Calibration Subset: Summary, V2 (SNDRAQIML1BCALSUBSUM) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. AIRS/Aqua Level-1C calibration subset including clear cases, special calibration sites, random nadir spots, and high clouds. Infrared temperature sounders generate a large amount of Level-1B spectral data. For example, the AIRS instrument with 2378 channels, its visible light component and AMSU with 15 channels create 3x240 files each day, for a total of over 500 MB of data. The purpose of the Calibration Data Subsets is extract key information from these data into a few daily files to: 1. Facilitate a quick evaluation of the absolute calibration of the instruments. 2. Facilitate an assessment of the instrument performance under clear, cloudy, and extreme hot and cold conditions. 3. Facilitate the evaluation of instrument trends and their significance relative to climate trends. 4. Facilitate the comparison of AIRS with CrIS using their equivalent data subsets.The output files are constructed from Level-1B or Level-1C IR and MW brightness or antenna temperatures. Each file contains selected observations taken from a nominal 24-hour period. The “summary” product includes a large set of cases of interest, including all identified spectra that match selection criteria detailed below for clear, special cloud classes, etc. These amount to about 10% of all spectra. But for each selected case only brightness temperatures (BTs) for selected key channels are saved.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: AQUA AIRS IR-only Level 3 CLIMCAPS : Comprehensive Quality Control Gridded Daily V2 (SNDRAQIL3CDCCP) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products applying the comprehensive quality control (QC) methodology. Comprehensive QC accepts a retrieval if the profile is good to the surface and ensures consistent analysis across all levels and variables.

restrictednotspecifiedApr 2025View details →
nasa28/100

AMSR-MODIS Boundary Layer Water Vapor L3 Monthly 1 degree x 1 degree V2 (AMMBLWV) at GES DISC

Version 2 is the current version of this dataset. Version 2 uses an improved methodology to screen out high clouds.This data set provides an estimate the marine boundary layer water vapor beneath uniform cloud fields. Microwave radiometry from AMSR-E and AMSR-2 provides the total column water vapor, while the near-infrared imagery from MODIS provides the water vapor above the cloud layers. The difference between the two gives the vapor between the surface and the cloud top, which may be interpreted as the boundary layer water vapor.

restrictednotspecifiedApr 2025View details →
nasa28/100

MASTER: HyspIRI Airborne Campaign, California, Early Spring 2013, V2

This dataset includes Level 1B (L1B) and Level 2 (L2) data products from the MODIS/ASTER Airborne Simulator (MASTER) instrument. The spectral data were collected as part of the Hyperspectral Infrared Imager (HyspIRI) mission's preparatory airborne campaign during 6 flights aboard a NASA ER-2 aircraft over California and Nevada, U.S., from 2013-03-26 to 2013-04-19. An additional purpose of this campaign was an underpass of Landsat 8. Data products include L1B georeferenced multispectral imagery of calibrated radiance in 50 bands covering wavelengths of 0.460 to 12.879 micrometers at approximately 50-meter spatial resolution. Derived L2 data products are emissivity in 5 bands in thermal infrared range (8.58 to 12.13 micrometers) and land surface temperature. The L1B file format is HDF-4, and L2 products are provided in ENVI and KMZ formats. In addition, the dataset includes the flight path, spectral band information, instrument configuration, ancillary notes, and summary information for each flight, and browse images derived from each L1B data file.

restrictednotspecifiedApr 2025View details →
nasa28/100

Carbon Monitoring System Carbon Flux for Fire L4 V2 (CMSFluxFire) at GES DISC

This dataset provides the Carbon Flux for Fires.The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing, quantifying, understanding, and predicting the evolution of global carbon sources and sinks through improved monitoring of carbon stocks and fluxes. The System will use the full range of NASA satellite observations and modeling/analysis capabilities to establish the accuracy, quantitative uncertainties, and utility of products for supporting national and international policy, regulatory, and management activities. CMS will maintain a global emphasis while providing finer scale regional information, utilizing space-based and surface-based data and will rapidly initiate generation and distribution of products both for user evaluation and to inform near-term policy development and planning.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM GROUND VALIDATION MET ONE RAIN GAUGE PAIRS IPHEX V2

The GPM Ground Validation Met One Rain Gauge IPHEx V2 data were collected during the Integrated Precipitation and Hydrology Experiment (IPHEx) using Met One Model 380 tipping bucket precipitation gauges from September 11, 2013 to October 30, 2014 in the Southern Appalachians, spanning into the Piedmont and Coastal Plain regions of North Carolina. The goal of IPHEx was to evaluate the accuracy of satellite precipitation measurements and use the collected data for hydrology models in the region. The dataset contains two ASCII files per rain gauge with two rain gauges on a station platform. The gag dataset is quality-controlled reformatted precipitation recorded in millimeters at a temporal resolution of 1 minute and the gmin dataset contains cubic spline interpolated rain rates in millimeters per hour at 1 minute resolution.

restrictednotspecifiedApr 2025View details →
nasa28/100

VIIRS/NPP Atmospherically Corrected Surface Reflectance 6-Min L2 Swath 375m, 750m - V2

The VIIRS/NPP Atmospherically Corrected Surface Reflectance 6-Min L2 Swath 375m, 750m product, with short name VNP09, are estimates of surface reflectance in each of the VIIRS reflective bands I1-I3, M1-M5, M7, M8, M10, and M11. The VNP09 contains approximately 6 minutes' worth of data. Surface reflectance for each moderate-resolution (750m) or imagery-resolution (375m) pixel is retrieved separately for the Level-2 products. Surface reflectance is obtained by adjusting top-of-atmosphere reflectance to compensate for atmospheric effects. Corrections are made for the effects of molecular gases, including ozone and water vapor, and for the effects of atmospheric aerosols. All surface reflectance products are produced for daytime conditions only. The product is produced under all atmospheric conditions except for night and oceans.

restrictednotspecifiedApr 2025View details →
nasa28/100

NACP Woody Vegetation Characteristics of 1,039 Sites across North Slope, Alaska, V2

This data set provides the results of (1) field measurements of woody vegetation (shrubs) at 26 diverse sites across the North Slope of Alaska during 2010 and 2011, (2) field-based statistical estimates of site shrub structural characteristics, (3) high-resolution panchromatic satellite imagery-based estimates of field site shrub characteristics using the Canopy Analysis with Panchromatic Imagery (CANAPI) model, and (4) adjusted CANAPI estimates of shrub characteristics at 1,013 selected sites widely distributed across the North Slope.

restrictednotspecifiedApr 2025View details →
nasa28/100

OMPS-NPP L2 NP Ozone (O3) Vertical Profile swath orbital V2.9 (OMPS_NPP_NPBUVO3_L2) at GES DISC

The OMPS-NPP L2 NP Ozone (O3) Total Column swath orbital product provides ozone profile retrievals from the Ozone Mapping and Profiling Suite (OMPS) Nadir-Profiler (NP) instrument on the Suomi-NPP satellite. The V8 ozone profile algorithm relies on nadir profiler measurements made in the 250 to 310 nm range, as well as from measurements from the nadir mapper in the 300 to 380 nm range. Ozone mixing ratios are reported at 15 pressure levels between 50 and 0.5 hPa. Additionally, this data product contains measurements of total ozone, UV aerosol index and reflectivities at 331 and 380 nm.Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-82 to +82 degrees latitude), and there are about 14.5 orbits per day, each has typically 80 profiles. The NP footprint size is 250 km x 250 km. The files are written using the Hierarchical Data Format Version 5 or HDF5.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: JPSS-1 CrIS Level 3 Specific Quality Control Gridded Daily CLIMCAPS V2 (SNDRJ1IML3SDCCP) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sentinel-5P TROPOMI Tropospheric NO2 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__NO2____HiR) at GES DISC

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.For data before August 6th of 2019, please check S5P_L2__NO2____1 data collection.The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.The TROPOMI retrieval of total and tropospheric NO2, is based on the DOMINO approach, a DOAS retrieval, a pre-calculated air-mass factor (AMF) look-up table, and a data assimilation/chemistry transport model for the separation of the stratospheric and tropospheric contributions to the NO2 column. It also include many retrieval developments of the European Quality Assurance for Essential Climate Variables (QA4ECV) project.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.