Find research datasets worth reusing

opencc-by-4.0Nov 2021View details →

Supplemental Material for "Urban blue spaces and human health: A systematic review and meta-analysis of quantitative studies"

Open the record for dataset details and reuse information.

Supplementary Materials for the Article: Sex-Related Differences in the Association of Obesity with Outcomes in Out-of-Hospital Cardiac Arrest Patients

Supplementary Materials - Sex-Related Differences in the Association of Obesity Described by Emergency Medical Teams on Outcomes in Out-of-Hospital Cardiac Arrest Patients Supplementary Table 1 Opis: Detailed report on models related to location and initial rhythm, including odds ratios and confidence intervals for cardiac arrest outcomes. Supplementary Table 2 Opis: Further analysis of initial rhythm and location, adjusted by sex, age, and other factors affecting cardiac arrest outcomes. Supplementary Table 3 Opis: Assessment of multicollinearity between variables used in logistic regression models, based on the Variance Inflation Factor (VIF). Supplementary Table 4 Opis: Results of a three-way logistic regression model showing the combined effects of sex, location, and initial rhythm on the odds of Return of Spontaneous Circulation (ROSC). Supplementary Table 5 Opis: A logistic regression model demonstrating how location and age modulate ROSC odds, with and without interaction with initial rhythm.

Support Materials for Manuscript "Climate change induces rapid growth of dead ice in Asian glaciers" Review

<div>Description of support materials of paper "Climate change induces rapid growth of dead ice in Asian glaciers".</div> <div> </div> <div>The detailed description of files is below:</div> <div> </div> <div>·  Total.csv</div> <div>The subregional statistics of HMA dead ice area and mass in 2100 under different SSPs.</div> <div> </div> <div>·  Folder ./Inventory</div> <div>Interdecadal potential dead ice inventory in HMA.</div> <div> </div> <div>·  Folder ./Individual</div> <div>Interdecadal statistics of individual glaciers' dead ice in HMA for their ablation (unit: Gt), area (unit: km2) and mass (unit: Gt).</div>

EMO1 materials

Open the record for dataset details and reuse information.

Recovery and potential use for non-polyolefin materials after physical recycling of complex multilayers - Underlying data

Open the record for dataset details and reuse information.

Supplementary Material for "Phylogeny Inference Under Time-Decaying Migration and Varying Information Content"

This upload compirises XML files containing sequence information for the Anopheles gambiae group of African mosquitoes. The data were originally published in Fontaine et al. (2015), and were subsequently curated and modified by Thawornwattana et al. (2018), a subset of which we used in our upcoming work.

Datasets for "A classification-based approach to override cross-domain data bias in materials discovery"

This repository provides the featurized versions of the specialized datasets, SuperCon and ESTM, utilized in the study titled 'Classification-based detection and quantification of cross-domain data bias in materials discovery'.

Evolutive Dynamics in Early Modern European Drama: Reproduction Materials

The ZIP archive contains all materials necessary to reproduce/replicate workflows and results from this work: <blockquote> Luca Giovannini, Evolutive Dynamics in Early Modern European Drama: A Computational Approach, PhD dissertation, Universität Potsdam and Università di Padova, 2024. </blockquote> The archive is a copy of <a href="https://github.com/lucagiovannini7/emdracor" target="_blank" rel="noopener">this GitHub repository</a> and contains the following folders: <ul> <li><code>tei</code>: 150 early modern European plays, encoded in XML-TEI, composing the EmDraCor corpus. This folder, together with the <code>corpus.xml</code> file, can be used to (re)build the corpus on a dockerised version of DraCor (Börner et al., 2023b) through the <a href="https://github.com/dracor-org/stabledracor" target="_blank" rel="noopener">StableDraCor</a> Python library.</li> <li><code>scripts</code>: several commented Python scripts for corpus building, metadata enrichment, and analysis.</li> <li><code>metadata</code>: metadata tables, retrieved from the API and enriched through scripts, and other useful files. Most computations carried out in the dissertation can be performed directly on these tables, without need for dockerisation.</li> <li><code>legacy</code>: deprecated XML files.</li> </ul>

Supplementary Data for Bayesian material flow analysis of the construction aggregate cycle in England (2019)

Supplementary Data for Bayesian material flow analysis of the construction aggregate cycle in England (2019) by  Adam R. Mason 1,a, Tom Bide 2,b, Junyang Wang 3,c, John Morley 4,d, Mohit Arora 5,e, Alperen Yayla1,f, Julia A. Stegemann 5,g, Rupert J. Myers 1,h,*   1 Department of Civil and Environmental Engineering, Imperial College London, UK 2 British Geological Survey, UK 3 Department of Mathematics, Imperial College London, UK 4 Department of Earth Science and Engineering, Imperial College London, UK 5 School of Engineering, King’s College London, UK 6 Department of Civil, Environmental and Geomatic Engineering, University College London, UK   Author e-mails: a <a href="mailto:a.mason19@imperial.ac.uk">a.mason19@imperial.ac.uk</a>, b <a href="mailto:tode@bgs.ac.uk">tode@bgs.ac.uk</a>, c <a href="mailto:junyang.wang21@imperial.ac.uk">junyang.wang21@imperial.ac.uk</a>, d <a href="mailto:john.morley18@imperial.ac.uk">john.morley18@imperial.ac.uk</a>, e <a href="mailto:mohit.arora@kcl.ac.uk">mohit.arora@kcl.ac.uk</a>, f <a href="mailto:a.yayla22@imperial.ac.uk">a.yayla22@imperial.ac.uk</a>, g <a href="mailto:j.stegemann@ucl.ac.uk">j.stegemann@ucl.ac.uk</a>; *corresponding author: h <a href="mailto:r.myers@imperial.ac.uk">r.myers@imperial.ac.uk</a>

opencc-by-4.0Apr 2024View details →

Influence of Fiber Diameter of Polycaprolactone Nanofibrous Materials on Biofilm Formation and Retention of Bacterial Cells

Open the record for dataset details and reuse information.

Supplemental materials for "Boosting Barlow Twins reduced order modeling for machine learning-based surrogate models in multiphase flow problems"

Supplemental materials for "Boosting Barlow Twins reduced order modeling for machine learning-based surrogate models in multiphase flow problems" in Water Resources Research. Detailed information is available in readme.md.

restrictedcc-by-4.0May 2024View details →

Memory of shear flow in soft jammed materials

Dataset contains flow curve, stress relaxation and residual stress of experimental system (2w% Carbopol (974p (Lubrizol)) in propylene glycol). Simulation dataset contains flow curves, stress relaxation, residual stress, nematic order parameter, mean squared displacement, spatial correlations of displacement fluctuation, fraction of icosahedrons for different shear rates.  Data description is in "Memory of shear flow in soft jammed materials" arXiv preprint arXiv:2312.00251 (2023)

opencc-by-4.0Jun 2024View details →

Keterampilan Berpikir Kritis Matematis Siswa Ditinjau dari Gaya Kognitif Pada Materi Bangun Ruang

Penelitian ini awalnya didasarkan pada minat peneliti dalam kasus yang ditemukan pada siswa ketika menyelesaikan persoalan matematika yang diberikan dalam bentuk keterampilan berpikir terhadap suatu masalah. Penelitian ini bertujuan untuk mengeksplorasi pola berpikir siswa untuk menggambarkan keterampilan berpikir kritis siswa saat mereka memberikan solusi penyelesaian secara kritis terhadap sebuah masalah matematika. Penelitian ini adalah penelitian kualitatif dalam studi kasus yang melibatkan satu siswa sebagai subjek penelitian. Temuan menunjukkan bahwa (1) kemampuan siswa menyelesaikan masalah dengan strategi yang tepat sesuai dengan pengetahuan awalnya dengan gaya kognitif yang dimiliki oleh siswa tersebut; (2) pengalaman pribadi dari pengetahuan awal yang disimpan dalam memori jangka panjang; (3) aktivitas kebenaran dalam bernalar

Bibliographic Analysis Data for PLGA vs Liposomes Comparison Emphasizing on Material Informatics

Open the record for dataset details and reuse information.

Supporting Material: Proof-of-principle of 3D-printed track-end detectors for dosimetry in proton therapy

Project description and contents of the submitted manuscript: Background: Dosimetric equipment in particle therapy (PT) is associated with high costs. There is a lack of versatile, tissue-equivalent detectors suitable for in-vivo dosimetry. Faraday-cup (FC) type detectors are sensitive to stopped protons, i.e. to trackends. They experience a renaissance in PT as they can cope with high dose rates. Owing to their simple functional principle, production of FC could benefit from the dynamic technological developments in additive manufacturing of sensors. Purpose: To build FC-type detectors for PT by standard 3D-printing. This study seeks to build an integrating, single-channel FC for replacement of a traditional FC and a 2×2 array of FC elements indicating the feasibility of a spatially resolving detector. Methods: Samples of FCs were produced with a dual-extruder 3D-printer with polylactic-acid filaments, which contained graphite in the conductive parts of the detector. Production was optimizied in terms of materials and printing temperature. Samples were characterized by electrical tests and non-destructive 3D x-ray imaging. Beam tests were conducted at a clinical PT machine. Results: Operational FC-type detectors for proton fields were printed. The detected charge of the single-channel FC corresponded qualitatively to the one of a traditional FC. A 2 × 2 FC array was fabricated in a single run. There was a linear relationship between the response of the individual FC elements and the machine output. Conclusions: 3D-printing is a viable method for producing low-cost, tissue-equivalent, FC-type detectors for PT. They could potentially be used as track-end detectors in anthropomorphic phantoms. <h3>Shared files:</h3> 2x2_FC_matrix: design CAD files of FC array Single_channel_FC: design CAD files of simplified, single-channel FC CT_matrix: high-resolution x-ray CT image set of the 2x2 FC array Measured_values_for_MedPhys_technical_note: Excel sheet of the data presented in the paper

opennotspecifiedApr 2020View details →

FIGURE 1 in Lectotype of Solidago ×niederederi (Asteraceae) selected from a recently rediscovered original material

FIGURE 1. The lectotype specimen of Solidago ×niederederi mounted on two herbarium sheets (A—PRC455790, B—PRC455791) deposited in the PRC herbarium.

FIGURE 2 in Lecanicillium gracile (Cordycipitaceae), a new species isolated from mineral building materials

FIGURE 2. Lecanicillium gracile (CBS 142821, ex-type). a–c 14 days-old (25 °C, dark regime) colonies on PDA, PCA and MYA in 9 cm Petri plates, respectively. d–f Reverses of 14 days-old (25 °C, dark regime) colonies on PDA, PCA and MYA in 9 cm Petri plates, respectively. g–h Phialides and conidia (SEM). i–j Conidia. Scale bars: g–j = 10 μm.

FIGURE 1 in Lecanicillium gracile (Cordycipitaceae), a new species isolated from mineral building materials

FIGURE 1. Two-gene-based phylogeny (ITS rDNA+TEF1a) of Lecanicillium and closely related species. Our new isolates are marked in bold. Bayesian topology is displayed with the PP/ML support values over each node. Thickened branches indicated strong combined support (PP> 0.94, ML> 90). T – type/ex-type strains.

FIGURE 4 in Lecanicillium gracile (Cordycipitaceae), a new species isolated from mineral building materials

FIGURE 4. Temperature-dependent growth profiles of Lecanicillium gracile isolates. Colony diam. after 14 d on PDA (n=3, mean±SD).

FIGURE 3 in Lecanicillium gracile (Cordycipitaceae), a new species isolated from mineral building materials

FIGURE 3. Lecanicillium gracile (CBS 142821, ex-type). a–c Prostrate conidiophores with solitary phialides or phialides produced in whorls (LM). d Short erect conidiophore with phialides (LM). e–f Prostrate conidiophores with phialides produced in whorls (LM). g–h Phialides secondarily born on the preceeding phialides (LM). i Conidia (LM). j A drawing of prostrate conidiophores with phialides. k A drawing of conidiophores with phialides and conidia. Scale bars: a = 50 μm; b–k = 10 μm.