Find research datasets worth reusing

MMS 3 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), Burst Mode, 8192 Sample/s Data

Search Coil Magnetometer (SCM) AC Magnetic Field (8192 samples/s), Level 2, Burst Mode Data. The tri-axial Search-Coil Magnetometer with its associated preamplifier measures three-dimensional magnetic field fluctuations. The analog magnetic waveforms measured by the SCM are digitized and processed inside the Digital Signal Processor (DSP), collected and stored by the Central Instrument Data Processor (CIDP) via the Fields Central Electronics Box (CEB). Prior to launch, all SCM Flight models were calibrated by LPP team members at the National Magnetic Observatory, Chambon-la-Foret (Orleans). Once per orbit, each SCM transfer function is checked thanks to the onboard calibration signal provided by the DSP. The SCM is operated for the entire MMS orbit in survey mode. Within scientific Regions Of Interest (ROI), burst mode data are also acquired as well as high speed burst mode data. This SCM data set corresponds to the AC magnetic field waveforms in nanoTesla and in the GSE frame. The SCM instrument paper for SCM can be found at http://link.springer.com/article/10.1007/s11214-014-0096-9 and the SCM data product guide at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.

Catalog of Gamma-Ray Bursts: Afterglows

The GRB Afterglow table contains intensity and redshift measurements obtained with ground based telescopes or with space based observatories carried out after the detection of the GRBs. The catalog has been created using information from journal publications, IAU circulars, and GCN notices, and records afterglow measurements for bursts detected after May 1996. Each record within this catalog is dedicated to a specific measurement of an afterglow made with an observatory. Therefore for a given GRB, there are several entries reporting afterglow measurements from the different observatories. This catalog is linked to the main GRB catalog and it is updated when a new GRB and/or afterglow measurements are reported. This table was ingested by the HEASARC in June 2008 based on electronic versions obtained from the author(s), who compiled the catalog in 2005. This is a service provided by NASA HEASARC .

MMS 4 Flux Gate Magnetometer (FGM) DC Magnetic Field, Level 2 (L2), Burst Mode, 128 Sample/s, v4/5 Data

The Fluxgate Magnetometers (FGM) on Magnetospheric Multiscale consist of a traditional Analog Fluxgate Magnetometer (AFG) and a Digital Fluxgate magnetometer (DFG). The dual magnetometers are operated as a single instrument providing a single intercalibrated data product. Range changes occur at different times on the two instruments so the gains checked each periapsis can be carried out unambiguously to apoapsis. Cross correlation of calibration parameters can separate causes of the any apparent calibration changes. Use of Electron Drift Instrument (EDI) to determine the field along the rotation axis allows accurate monitoring of the zero levels along the rotation axis. Prior to launch the magnetometers were calibrated at the Technical University, Braunschweig, except for the AFG magnetometers on MMS3 and MMS4, which were calibrated at UCLA. Both sets of sensors are operated for the entire MMS orbit, with slow survey (8 samples per second) outside of the Region of Interest (ROI), and fast survey (16 samples per second) inside the ROI. Within the ROI, burst mode data (128 samples per second) are also acquired. A detailed description of the MMS fluxgate magnetometers, including science objectives, instrument description, calibration, magnetic cleanliness program, and data flow can be found at http://link.springer.com/article/10.1007%2Fs11214-014-0057-3 (DOI 10.1007/s11214-014-0057-3). Additional information can also be found at http://www-spc.igpp.ucla.edu/ssc/mms (UCLA), and http://www.iwf.oeaw.ac.at/de/forschung/erdnaher-weltraum/mms/dfg (IWF, Graz). For the purpose of creating a unified FGM Level 2 data product, burst mode data is taken from DFG and survey mode data is taken from AFG. Because AFG and DFG are cross-calibrated on an orbit-averaged basis, small differences in offset may be observed between Level 2 burst and survey mode data. Consequently, any differences are within the error of the measurement. Based on preliminary analysis of the data, the absolute error within the Region of Interest (ROI) is estimated to be no more than 0.1 nT in the spin-plane, 0.15 nT along the spin-axis and 0.2 nT in total magnitude.

MMS 2 Fast Plasma Investigation, Dual Ion Spectrometer (FPI, DIS) Instrument Distributions, Level 2 (L2), Burst Mode, 0.15 s Data

The Fast Plasma Instrument (FPI) usually Operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for the current Mission Phase. Data are taken at Burst (30/150 ms for DES/DIS) Resolution in this Mode. Data are also made available at Survey (4.5 s, etc.) Resolution. Per Mission Design, not all Burst Resolution Data are downlinked, but all Survey Data are downlinked. This Product contains Phase Space Distribution Maps of those Burst Resolution Data selected for downlink. In particular, the (highest possible Quality at the Time of Release) corrected/converted "Burst Sky Map" Distributions are reported with Time Stamps and other Annotation characterizing the State of the Instrument System at the indicated Time.

MMS 1 Electron Drift Instrument (EDI) Ambient Electron Flux, Projection Method 2 (PM2), Level 2 (L2), Burst Mode, 0.9765625 ms Data

Electron Drift Instrument (EDI) Ambient Burst Survey, Level 2, 0.0009765625 s Data (1024 samples/s). EDI has two scientific data acquisition modes, called electric field mode and ambient mode. In electric field mode, two coded electron beams are emitted such that they return to the detectors after one or more gyrations in the ambient magnetic and electric field. The firing directions and times-of-flight allow the derivation of the drift velocity and electric field. In ambient mode, the electron beams are not used. The detectors with their large geometric factors and their ability to adjust the field of view quickly allow continuous sampling of ambient electrons at a selected pitch angle and fixed but selectable energy. To find the beam directions that will hit the detector, EDI sweeps each beam in the plane perpendicular to B at a fixed angular rate of 0.22 °/ms until a signal has been acquired by the detector. Once signal has been acquired, the beams are swept back and forth to stay on target. Beam detection is not determined from the changes in the count-rates directly, but from the square of the beam counts divided by the background counts from ambient electrons, i.e., from the square of the instantaneous signal-to-noise ratio (SNR). This quantity is computed from data provided by the correlator in the Gun-Detector Electronics that also generates the coding pattern imposed on the outgoing beams. If the squared SNR ratio exceeds a threshold, this is taken as evidence that the beam is returning to the detector. The thresholds for SNR are chosen dependent on background fluxes. They represent a compromise between getting false hits (induced by strong variations in background electron fluxes) and missing true beam hits. The basic software loop that controls EDI operations is executed every 2 ms. As the times when the beams hit their detectors are neither synchronized with the telemetry nor equidistant, EDI data have no fixed time-resolution. Data are reported in telemetry slots. In Survey, using the standard packing mode 0, there are eight telemetry slots per second and Gyn Detector Unit (GDU). The last beam detected during the previous slot will be reported in the current slot. If no beam has been detected, the data quality will be set to zero. In Burst telemetry there are 128 slots per second and GDU. The data in each slot consists of information regarding the beam firing directions (stored in the form of analytic gun deflection voltages), times-of-flight (if successfully measured), quality indicators, time stamps of the beam hits, and some auxiliary correlator-related information. Whenever EDI is not in electron drift mode, it uses its ambient electron mode. The mode has the capability to sample at either 90 degrees pitch angle or at 0/180 degrees (field aligned), or to alternate between 90 degrees and field aligned with selectable dwell times. While all options have been demonstrated during the commissioning phase, only the field aligned mode has been used in the routine operations phase. The choices for energy are 250 eV, 500 eV, and 1 keV. The two detectors, which are facing opposite hemispheres, are looking strictly into opposite directions, so while one detector is looking along B the other is looking antiparallel to B (corresponding to pitch angles of 180 and 0 degrees, respectively). The two detectors switch roles every half spin of the spacecraft as the tip of the magnetic field vector spins outside the field of view of one detector and into the field of view of the other detector. Starting January 4, 2016, the anodes were chosen such that the projection of the magnetic field vector was best aligned with the center of the first (that is, outer) of the four anodes. This provides coverage of a larger range of pitch angles in general. Data taken in this configuration are identified by the term "amb-pm2" in the data product names. In the burst data where four channels (corresponding to the four adjacent sensor anode pads) are sampled per GDU, channel 1 represents best the pitch angle of 0 degrees (or 180 degrees). The EDI instrument paper can be found at: http://link.springer.com/article/10.1007%2Fs11214-015-0182-7. The EDI instrument data products guide can be found at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.

STEREO-A In-Situ Measurements of Particles and CME Transients (IMPACT) Fluxgate Magnetometer (MAG) Burst Mode, Magnetic Field Vector, Radial-Tangential-Normal (RTN) Coordinates, Level 1 (L1), 31 ms Data

This data product contains Level 1 0.03125-s or 32 Hz burst-mode values of solar wind magnetic field data measured by the IMPACT Magnetometer on STEREO-A in Radial-Tangential-Normal, RTN, coordinates.

MMS 3 Fast Plasma Investigation, Dual Electron Spectrometer (FPI, DES) Distribution Moments, Level 2 (L2), Burst Mode, 30 ms Data

The Fast Plasma Instrument (FPI) usually Operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for the current Mission Phase. Data are taken at Burst (30/150 ms for DES/DIS) Resolution in this Mode. Data are also made available at Survey (4.5 s, etc.) Resolution. Per Mission Design, not all Burst Resolution Data are downlinked, but all Survey Data are downlinked. Planning around Calibration Activities, avoidance of Earth Radiation Belts, etc., when possible, FPI usually Operates in Slow Survey (SS) Mode outside of ROI, and then only the 60 s Resolution Survey Data are available. This Product contains Results from integrating the standard Moments of Phase Space Distributions formed from the indicated Data Type (DES/DIS Burst, FS or SS). For Convenience, some additional Parameters are included to augment those most commonly found in a Moments Product of this sort, plus Time Stamps and other Annotation characterizing the State of the Instrument System at the indicated Time.

MMS 1 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), High Speed Burst Mode, 16384 Sample/s Data

Search Coil Magnetometer (SCM) AC Magnetic Field (16384 samples/s), Level 2, High Speed Burst Mode Data. The tri-axial Search-Coil Magnetometer with its associated preamplifier measures three-dimensional magnetic field fluctuations. The analog magnetic waveforms measured by the SCM are digitized and processed inside the Digital Signal Processor (DSP), collected and stored by the Central Instrument Data Processor (CIDP) via the Fields Central Electronics Box (CEB). Prior to launch, all SCM Flight models were calibrated by LPP team members at the National Magnetic Observatory, Chambon-la-Foret (Orleans). Once per orbit, each SCM transfer function is checked thanks to the onboard calibration signal provided by the DSP. The SCM is operated for the entire MMS orbit in survey mode. Within scientific Regions Of Interest (ROI), burst mode data are also acquired as well as high speed burst mode data. This SCM data set corresponds to the AC magnetic field waveforms in nanoTesla and in the GSE frame. The SCM instrument paper for SCM can be found at http://link.springer.com/article/10.1007/s11214-014-0096-9 and the SCM data product guide at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.

MMS 4 Fast Plasma Investigation, Dual Ion Spectrometer (FPI, DIS) Distribution Moments, Level 2 (L2), Burst Mode, 0.15 s Data

The Fast Plasma Instrument (FPI) usually Operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for the current Mission Phase. Data are taken at Burst (30/150 ms for DES/DIS) Resolution in this Mode. Data are also made available at Survey (4.5 s, etc.) Resolution. Per Mission Design, not all Burst Resolution Data are downlinked, but all Survey Data are downlinked. Planning around Calibration Activities, avoidance of Earth Radiation Belts, etc., when possible, FPI usually Operates in Slow Survey (SS) Mode outside of ROI, and then only the 60 s Resolution Survey Data are available. This Product contains Results from integrating the standard Moments of Phase Space Distributions formed from the indicated Data Type (DES/DIS Burst, FS or SS). For Convenience, some additional Parameters are included to augment those most commonly found in a Moments Product of this sort, plus Time Stamps and other Annotation characterizing the State of the Instrument System at the indicated Time.

STEREO-B In-Situ Measurements of Particles and CME Transients (IMPACT) Solar Wind Electron Analyzer (SWEA) 3-Dimensional Electron Distributions, Burst Mode, Level 1 (L1), 2 s Data

The file contains Level 1 3D electron distributions in burst mode from the In-situ Measurements of Particles and CME Transients, IMPACT, SWEA instrument on the STEREO Behind spacecraft. For important usage caveats see https://cdaweb.gsfc.nasa.gov/stereo_swea_caveats.html.

MMS 2 Electron Drift Instrument (EDI) Electric Field, Level 2 (L2), Burst Mode, 0.9765625 ms Data

Electron Drift Instrument (EDI) Electric Field Burst Survey, Level 2, 0.0009765625 s Data (1024 samples/s). EDI has two scientific data acquisition modes, called electric field mode and ambient mode. In electric field mode, two coded electron beams are emitted such that they return to the detectors after one or more gyrations in the ambient magnetic and electric field. The firing directions and times-of-flight allow the derivation of the drift velocity and electric field. In ambient mode, the electron beams are not used. The detectors with their large geometric factors and their ability to adjust the field of view quickly allow continuous sampling of ambient electrons at a selected pitch angle and fixed but selectable energy. To find the beam directions that will hit the detector, EDI sweeps each beam in the plane perpendicular to B at a fixed angular rate of 0.22 °/ms until a signal has been acquired by the detector. Once signal has been acquired, the beams are swept back and forth to stay on target. Beam detection is not determined from the changes in the count-rates directly, but from the square of the beam counts divided by the background counts from ambient electrons, i.e., from the square of the instantaneous signal-to-noise ratio (SNR). This quantity is computed from data provided by the correlator in the Gun-Detector Electronics that also generates the coding pattern imposed on the outgoing beams. If the squared SNR ratio exceeds a threshold, this is taken as evidence that the beam is returning to the detector. The thresholds for SNR are chosen dependent on background fluxes. They represent a compromise between getting false hits (induced by strong variations in background electron fluxes) and missing true beam hits. The basic software loop that controls EDI operations is executed every 2 ms. As the times when the beams hit their detectors are neither synchronized with the telemetry nor equidistant, EDI data have no fixed time-resolution. Data are reported in telemetry slots. In Survey, using the standard packing mode 0, there are eight telemetry slots per second and Gyn Detector Unit (GDU). The last beam detected during the previous slot will be reported in the current slot. If no beam has been detected, the data quality will be set to zero. In Burst telemetry there are 128 slots per second and GDU. The data in each slot consists of information regarding the beam firing directions (stored in the form of analytic gun deflection voltages), times-of-flight (if successfully measured), quality indicators, time stamps of the beam hits, and some auxiliary correlator-related information. Whenever EDI is not in electron drift mode, it uses its ambient electron mode. The mode has the capability to sample at either 90 degrees pitch angle or at 0/180 degrees (field aligned), or to alternate between 90 degrees and field aligned with selectable dwell times. While all options have been demonstrated during the commissioning phase, only the field aligned mode has been used in the routine operations phase. The choices for energy are 250 eV, 500 eV, and 1 keV. The two detectors, which are facing opposite hemispheres, are looking strictly into opposite directions, so while one detector is looking along B the other is looking antiparallel to B (corresponding to pitch angles of 180 and 0 degrees, respectively). The two detectors switch roles every half spin of the spacecraft as the tip of the magnetic field vector spins outside the field of view of one detector and into the field of view of the other detector. This is the primary data product generated from data collected in electric field mode. The science data generated are drift velocity and electric field data in various coordinate systems. They are derived from triangulation and/or time-of-flight analysis. Where both methods are applicable, their results will be combined using a weighting approach based on their relative errors. The EDI instrument paper can be found at: http://link.springer.com/article/10.1007%2Fs11214-015-0182-7. The EDI instrument data products guide can be found at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.

MMS 1 Fast Plasma Investigation, Dual Electron Spectrometer (FPI, DES) Partial Distribution Moments, Level 2 (L2), Burst Mode, 30 ms Data

FPI usually operates in Fast Survey (FS) Mode in the MMS Region Of Interest (ROI) for the current Mission Phase. Data are taken at Burst (30/150 ms for DES/DIS) Resolution in this Mode. Data are also made available at Survey (4.5 s, etc.) Resolution. Per Mission Design, not all Burst Resolution Data are downlinked, but all Survey Data are downlinked. Planning around Calibration Activities, avoidance of Earth Radiation Belts, etc., when possible, FPI usually operates in Slow Survey (SS) Mode (60 s Resolution) outside of ROI, and then only the 60 s Resolution Survey Data are available. This Product contains Partial Moments that come from performing the Standard Moment Integrals over a limited Portion of Velocity Space. The resulting Quantities are named similarly to their corresponding Standard Moments, but are decorated with 'part' to differentiate. For example, density_part is the Density Moment integrated from a particular Energy Step to Infinity. These Partial Moments are formed from the indicated Data Type (DES/DIS Burst, FS or SS). For convenience, some additional Parameters are included to augment those most commonly found in a Moments Product of this sort, plus Time Stamps and other Annotation characterizing the State of the Instrument System at the indicated Time.

MMS 2 Magnetic Ephemeris and Coordinates (MEC) and Support (Tsyganenko 1989 model, Dynamic conditions), Level 2 (L2), Burst Mode, 30 ms Data

Magnetospheric Multiscale 2 (MMS 2) spacecraft position, velocity, attitude, angular momentum vector, and magnetic ephemeris and coordinates (MEC), Level-2 science data at Burst (30 ms) time resolution. The Magnetic ephemeris data are calculated by using the Tsyganenko 1989 magnetic field model for disturbed magnetospheric conditions. Many variables are included in this data product including the magnetic field measured at the spacecraft. If possible, the northern and southern hemisphere footpoints of the spacecraft are found by tracing along the magnetic field line threading through the spacecraft per the given Tsyganenko and internal magnetic field models. The northern and southern hemisphere loss cone angles are also given. The magnetic field strength at the footpoints and the minimum magnetic field strength along the field line are also calculated by using the field models. Other variables list the spacecraft L-shell, the magnetic local time, the magnetic latitude and longitude, and whether the threading field line is open, closed, etc. Rotational quaternions are provided to allow coordinate transformation from GEI into 11 other coordinate systems including BSC, GEO, GSE, GSE2000, GSE, and SM. The list of ancillary variables includes the dipole tilt angle, the Dst and Kp actvity indices, and separate flags that denote satellite eclipse by the Earth and Moon.

MMS 4 Fast Plasma Investigation, Dual Ion Spectrometer (FPI, DIS) Instrument Distributions, Level 2 (L2), Burst Mode, 0.15 s Data

MMS 4 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), Burst Mode, 8192 Sample/s Data

MMS 2 Hot Plasma Composition Analyzer (HPCA) Moments, Level 2 (L2), Burst Mode, 10 s Data

Hot Plasma Composition Analyzer (HPCA) Moments, Level 2, Burst Survey, 10 s Data. The MMS HPCA instruments measure the energy and composition of magnetospheric plasmas in the energy range from 1 eV to 40 keV. An electrostatic energy analyzer (ESA) that is optically coupled to a carbon-foil based Time-of-Flight (TOF) section comprises each HPCA. The basic HPCA data product is an array of counts for 5 ion species, at 63 energies, for each of 16 elevation anodes. Sixteen basic products, also called azimuths, are acquired every 10 s; half a spacecraft spin period nominally has 16 azimuths. The five ion species are protons (H+), alpha particles (He++), helium ions (He+), singly charged Oxygen (O+), and background counts.

MMS 4 Magnetic Ephemeris and Coordinates (MEC) and Support (Tsyganenko 1989 model, Quiet conditions), Level 2 (L2), Burst Mode, 30 ms Data

Magnetospheric Multiscale 4 (MMS 4) spacecraft position, velocity, attitude, angular momentum vector, and magnetic ephemeris and coordinates (MEC), Level-2 science data at Burst (30 ms) time resolution. The Magnetic ephemeris data are calculated by using the Tsyganenko 1989 magnetic field model for quiet magnetospheric conditions. Many variables are included in this data product including the magnetic field measured at the spacecraft. If possible, the northern and southern hemisphere footpoints of the spacecraft are found by tracing along the magnetic field line threading through the spacecraft per the given Tsyganenko and internal magnetic field models. The northern and southern hemisphere loss cone angles are also given. The magnetic field strength at the footpoints and the minimum magnetic field strength along the field line are also calculated by using the field models. Other variables list the spacecraft L-shell, the magnetic local time, the magnetic latitude and longitude, and whether the threading field line is open, closed, etc. Rotational quaternions are provided to allow coordinate transformation from GEI into 11 other coordinate systems including BSC, GEO, GSE, GSE2000, GSE, and SM. The list of ancillary variables includes the dipole tilt angle, the Dst and Kp actvity indices, and separate flags that denote satellite eclipse by the Earth and Moon.

restrictedus-pdMar 2025View details →

JUNO E/J/S/SS WAVES CALIBRATED BURST FULL RESOLUTION V1.0

The Juno Waves calibrated burst waveform full resolution data set includes all high rate science electric field waveforms from 50Hz up to 45.25 MHz and magnetic field waveforms from 50Hz to 20kHz with sample rates that depend on the receiver used to obtain the waveforms. This is the complete waveform data set containing all high rate binning mode data and record mode data received from Waves from launch until the end of mission including initial checkout, the Earth flyby, the Jupiter orbits and cruise. Data are acquired from the Waves Low Frequency Receiver (LFR) and High Frequency Receiver (HFR) and are typically losslessly compressed on board. These data are presented in binary SERIES objects. This data set comprises highest temporal resolution data obtained by Waves (or all other Juno instruments, for that matter). Pre-rendered spectrograms generated from these data are included as well to provide the user with a quick view of the content of the data. This data set should be among the last used of any in the Waves archive as it provides highly detailed information on very short isolated intervals in time. The Waves full resolution survey data provide context for these data.

MMS 4 Search Coil Magnetometer (SCM) AC Magnetic Field Level 2 (L2), High Speed Burst Mode, 16384 Sample/s Data

MMS 1 Fast Plasma Investigation, Dual Ion Spectrometer (FPI, DIS) Instrument Distributions, Level 2 (L2), Burst Mode, 0.15 s Data