Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,580

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,580 results for “V2”

Learn how ShareScore rates datasets ↗
nasa28/100

GLDAS Catchment Land Surface Model L4 daily 0.25 x 0.25 degree GRACE-DA1 V2.2 (GLDAS_CLSM025_DA1_D_EP) at GES DISC

NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.GLDAS-2.2 is new to the GES DISC archive and currently includes a main product from CLSM-F2.5 with Data Assimilation for the Gravity Recovery and Climate Experiment (GRACE-DA) from February 2003 to present. The GLDAS-2.2 data are available in two production streams: one with GRACE data assimilation outputs (the main production stream), and one without GRACE-DA (the early production stream). Since the GRACE data have a 2-6 month latency, the GLDAS-2.2 data are first created without GRACE-DA, and are designated as the Early Product (EP), with about 1 month latency. Once the GRACE data become available, the GLDAS-2.2 data are processed with GRACE-DA in the main production stream and are removed from the Early Product archive. This data product is an Early Product for GLDAS-2.2 Catchment Land Surface Model daily 0.25 x 0.25 degree with GRACE-DA. The GLDAS-2.2 GARCE-DA product was simulated with Catchment-F2.5 in Land Information System (LIS) Version 7. The data product contains 24 land surface fields from February 1, 2003 to present.The simulation started on February 1, 2003 using the conditions from the GLDAS-2.0 Daily Catchment model simulation, forced with the meteorological analysis fields from the operational European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecasting System. The total terrestrial water anomaly observation from GRACE satellite was assimilated (Li et al, 2019). Due to the data agreement with ECMWF, this GLDAS-2.2 daily product does not include the meteorological forcing fields.The GLDAS-2.2 data are archived and distributed in NetCDF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

VIIRS/JPSS1 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT - V2

The VIIRS/JPSS1 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT product, short-name VJ114_NRT is based on the MODIS Fire algorithm. The input to the Active Fires production are Level-1B moderate-resolution reflective band M7, and emissive bands M13 and M15. The fire algorithm first calculates bands M13, M15 brightness temperature (BT) statistics for a group of background pixels adjacent to each potential fire pixel. These statistics are used to set thresholds for several contextual fire detection tests. There is also an absolute fire detection test based on a pre-set M13 BT threshold. If the results of the absolute and relative fire detection tests meet certain criteria, the pixel is labeled as fire. The designation of a pixel as fire from the results of the BT threshold tests may be overridden under sun glint conditions or if too few pixels were used to calculate the background statistics.The VJ114_NRT product contains several pieces of information for each fire pixel: pixel coordinates, latitude and longitude, pixel M7 reflectance, background M7 reflectance, pixel M13 and M15 BT, background M13 and M15 BT, mean background BT difference, background M13, M15, and BT difference mean absolute deviation, fire radiative power, number of adjacent cloud pixels, number of adjacent water pixels, background window size, number of valid background pixels, detection confidence, land pixel flag, background M7 reflectance, and reflectance mean absolute deviation.The product provides day and nighttime active fire detection over land and water (from gas flares). The VJ114 product provides fire data continuity with NASA's EOS MODIS 1 km fire product. For more information visit University of Maryland VIIRS Active Fire Web page at http://viirsfire.geog.umd.edu/

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM GROUND VALIDATION RAIN GAUGE PAIRS MC3E V2

The GPM Ground Validation Rain Gauge Pairs MC3E V2 data measures the amount of fallen precipitation collected by tipping bucket rain gauges made by Met One Instruments, Inc. and Campbell Scientific Corp. Precipitation from each is collected to a resolution of 0.254 mm of liquid water for each bucket tip. These gauges record the rainfall at a 1-minute resolution. This data set has two types of files, the recorded rainfall value (mm) and a cubic-spline interpolated rain rate (mm/hr) produced using the method described in Wang, 2008. There are two rain gauges located on each station (A or B), each with their own set of data files. Data were collected from April 2011 through June 2011 as part of the GPM Ground Validation Mid-latitude Continental Convective Cloud Experiment (MC3E). Detailed information about the Met One Model 380 Precipitation Gauge is available at http://www.metone.com/docs/370_380_precipitation_gauge.pdf. Details about the Campbell Scientific rain gauge is found at https://s.campbellsci.com/documents/us/product-brochures/b_385.pdf.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: Sun Synchronous 13:30 orbit Climate Hyperspectral InfraRed Product (CHIRP): Calibrated Radiances from EOS-Aqua, S-NPP, JPSS-1/NOAA-20, V2 (SNDR13CHRP1) at GES DISC

The Climate Hyperspectral Infrared Radiance Product (CHIRP) is a Level 1 radiance product derived from Atmospheric Infrared Sounder (AIRS) on EOS-AQUA and the Cross-Track Infrared Sounders (CrIS) on the SNPP and JPSS-1+ platforms. (JPSS-1 is also called NOAA-20). CHIRP provides a consistent spectral response function (SRF) across all instruments. Inter-instrument radiometric offsets are removed with SNPP-CrIS chosen as the "standard". CHIRP follows the original instrument storage, i.e., granule in, granule out, and contains all information needed for retrievals (including cross-track, along-track, fov id, etc.). This version of CHIRP, SNDR13CHRP1, is the primary CHIRP product which provides a full radiance record from 2002 onwards starting with AIRS from September 1, 2002 to August 30, 2016, switching to the SNPP CrIS instrument on September 1, 2016. The SNDR13CHRP1 product then switches to using JPSS-1 CrIS radiances starting September 1, 2018. This selection of time periods provides the best match to times when the microwave sounders on each of these platforms exhibited good performance and avoids long outages (such as SNPP CrIS in early Spring 2019). CHIRP is available for AIRS, CrIS-SNPP, and CrIS-JPSS-1 for time periods not used in the product distributed here, and are named SNDR13CHRP1AQCal, SNDR13CHRP1SNCal, and SNDR13CHRP1J1Cal respectively.

restrictednotspecifiedApr 2025View details →
nasa28/100

CAR SCAR-B BRDF Measurements L1 V2 (CAR_SCARB_BRDF) at GES DISC

The objectives for the SCAR mission are to advance our knowledge of how the physical, chemical and radiative processes in our atmosphere are affected by sulfate aerosol and smoke from biomass burning; to improve our expertise at remotely sensing smoke, water vapor, clouds, vegetation and fires; and to assess the effects of deforestation and biomass burning on tropical landscapes. The SCAR-B campaign occurred in Brazil.This data set consists of observations made with the CAR instrument and includes values for bidirectional reflectance factor at varying spectral bands.

restrictednotspecifiedApr 2025View details →
nasa28/100

OMPS-NPP L2 LP Aerosol Extinction Vertical Profile swath daily 3slit V2.5 (OMPS_NPP_LP_L2_AER_DAILY) at GES DISC

The OMPS-NPP L2 LP Aerosol Extinction Vertical Profile swath daily 3slit (AER) product contains the retrieved aerosol extinction coefficients measured by the Ozone Mapping and Profiling Suite (OMPS) Limb-Profiler (LP) sensor on the Suomi-NPP satellite. The AER product measures stratospheric aerosol abundance and evolution at 6 wavelengths (510, 600, 675, 745, 869 and 997 nm) to complement the OMPS LP measurements of stratospheric and mesospheric profile ozone. This product replaces the previous single wavelength 675 nm (AER675) product.Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day each measuring three limb profiles spaced approximately 250 km in the cross-track direction. The profiles are measured from the ground up to about 80 km with a vertical resolution of the retrieved profiles of approximately 1.8 km.The files are written using the Hierarchical Data Format Version 5 or HDF5.

restrictednotspecifiedAug 2025View details →
nasa28/100

GLDAS Catchment Land Surface Model L4 monthly 1.0 x 1.0 degree V2.0 (GLDAS_CLSM10_M) at GES DISC

NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.This data set, GLDAS-2.0 monthly 1.0 degree, contains a series of land surface variables generated through temporal averaging of GLDAS-2.0 3-hourly data simulated from the Catchment Land Surface Model 3.6 in Land Information System (LIS) Version 7. The data set currently cover from January 1948 to December 2014, but will be extended as the forcing data becomes available. The GLDAS-2.0 data are archived and distributed in netCDF format.The GLDAS-2.0 model simulations were initialized on January 1, 1948, using soil moisture and other state fields from the LSM climatology for that day of the year. The simulations were forced by the global meteorological forcing data set from Princeton University (Sheffield et al., 2006). Each simulation uses the common GLDAS data sets for land water mask (MOD44W: Carroll et al., 2009) and elevation (GTOPO30) along with the model default land cover and soils datasets. Catchment model uses the Mosaic land cover classification and soils, topographic, and other model-specific parameters were derived in a consistent manner as in the NASA/GMAO’s GEOS-5 climate modeling system. The MODIS based land surface parameters are used in the current GLDAS-2.0 and GLDAS-2.1 products.In October 2020, all 3-hourly and monthly GLDAS-2 data were post-processed with the MOD44W MODIS land mask. Previously, some grid boxes over inland water were considered as over land and, thus, had non-missing values. The post-processing corrected this issue and masked out all model output data over inland water; the post-processing did not affect the meteorological forcing variables. More information can be found in the GLDAS-2 README. The MOD44W MODIS land mask is available on the GLDAS Project site.If you had downloaded the GLDAS data prior to November 2020, please download the data again to receive the post-processed data.

restrictednotspecifiedApr 2025View details →
nasa28/100

HLS Sentinel-2 Multi-spectral Instrument Surface Reflectance Daily Global 30m v2.0

The Harmonized Landsat Sentinel-2 (HLS) project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard Europe’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The combined measurement enables global observations of the land every 2–3 days at 30-meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment. The HLSS30 product provides 30-m Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectance (NBAR) and is derived from Sentinel-2A, Sentinel-2B, and Sentinel-2C MSI data products. The HLSS30 and [HLSL30](https://doi.org/10.5067/HLS/HLSL30.002) products are gridded to the same resolution and Military Grid Reference System ([MGRS](https://hls.gsfc.nasa.gov/products-description/tiling-system/)) tiling system and thus are “stackable” for time series analysis.The HLSS30 product is provided in Cloud Optimized GeoTIFF (COG) format, and each band is distributed as a separate COG. There are 13 bands included in the HLSS30 product along with four angle bands and a quality assessment (QA) band. See the User Guide for a more detailed description of the individual bands provided in the HLSS30 product.Known Issues* Unrealistically high aerosol and low surface reflectance over bright areas: The atmospheric correction over bright targets occasionally retrieves unrealistically high aerosol and thus makes the surface reflectance too low. High aerosol retrievals, both false high aerosol and realistically high aerosol, are masked when quality bits 6 and 7 are both set to 1 (see Table 9 in the [User Guide](https://lpdaac.usgs.gov/documents/1698/HLS_User_Guide_V2.pdf)); the corresponding spectral data should be discarded from analysis.* Issues over high latitudes: For scenes greater than or equal to 80 degrees north, multiple overpasses can be gridded into a single MGRS tile resulting in an L30 granule with data sensed at two different times. In this same area, it is also possible that Landsat overpasses that should be gridded into a single MGRS tile are actually written as separate data files. Finally, for scenes with a latitude greater than or equal to 65 degrees north, ascending Landsat scenes may have a slightly higher error in the BRDF correction because the algorithm is calibrated using descending scenes.* Fmask omission errors: There are known issues regarding the Fmask band of this data product that impacts HLSL30 data prior to April of 2022. The HLS Fmask data band may have omission errors in water detection for cases where water detection using spectral data alone is difficult, and omission and commission errors in cloud shadow detection for areas with great topographic relief. This issue does not impact other bands in the dataset.* Inconsistent snow surface reflectance between Landsat and Sentinel-2: The HLS snow surface reflectance can be highly inconsistent between Landsat and Sentinel-2. When assessed on same-day acquisitions from Landsat and Sentinel-2, Landsat reflectance is generally higher than Sentinel-2 reflectance in the visible bands.* Unrealistically high snow surface reflectance in the visible bands: By design, the Land Surface Reflectance Code (LaSRC) atmospheric correction does not attempt aerosol retrieval over snow; instead, a default aerosol optical thickness (AOT) is used to drive the snow surface reflectance. If the snow detection fails, the full LaSRC is used in both AOT retrieval and surface reflectance derivation over snow, which produces surface reflectance values as high as 1.6 in the visible bands. This is a common problem for spring images at high latitudes.* Unrealistically low surface reflectance surrounding snow/ice: Related to the above, the AOT retrieval over snow/ice is generally too high. When this artificially high AOT is used to derive the surface reflectance of the neighboring non-snow pixels, very low surface reflectance will result. These pixels will appear very dark in the visible bands. If the surface reflectance value of a pixel is below -0.2, a NO_DATA value of -9999 is used. In Figure 1, the pixels in front of the glaciers have surface reflectance values that are too low. * Unrealistically low reflectance surrounding clouds: Like for snow, the HLS atmospheric correction does not attempt aerosol retrieval over clouds and a default AOT is used instead. But if the cloud detection fails, an artificially high AOT will be retrieved over clouds. If the high AOT is used to derive the surface reflectance of the neighboring cloud-free pixels, very low surface reflectance values will result. If the surface reflectance value of a pixel is below -0.2, a NO_DATA value of -9999 is used.

restrictednotspecifiedApr 2025View details →
nasa28/100

OMPS/NPP PCA SO2 Total Column 1-Orbit L2 Swath 50x50km V2 (OMPS_NPP_NMSO2_PCA_L2) at GES DISC

The OMPS_NPP_NMSO2_PCA_L2 product is part of the MEaSUREs (Making Earth Science Data Records for Use in Research Environments) suite of products.It is retrieved from the NASA/NOAA Suomi National Polar-orbiting Partnership (SNPP) Ozone Mapping and Profiler Suite (OMPS) Nadir Mapper (NM) spectrometer and provides contiguous daily global monitoring of anthropogenic and volcanic sulfur dioxide (SO2), an important pollutant and aerosol precursor that affects both air quality and the climate. The product is based on the NASA Goddard Space Flight Center principal component analysis (PCA) spectral fitting algorithm (Li et al., 2013, 2017), and continues (Zhang et al., 2017) NASA's Earth Observing System (EOS) standard Aura/Ozone Monitoring Instrument SO2 product (OMSO2). The latest OMPS_NPP_NMSO2_PCA_L2 V2 product uses new Jacobian lookup tables and more realistic model based a priori profiles in anthropogenic SO2 retrievals. This helps to more accurately account for the pixel-to-pixel variation in SO2 sensitivity due to different factors such as the vertical distribution of SO2, solar and viewing angles, surface reflectivity, and cloudiness. As compared with the previous OMPS_NPP_NMSO2_PCA_L2 V1.2 product that assumes the same SO2 sensitivity for all OMPS pixels, the new V2 anthropogenic SO2 retrievals have reduced retrieval biases especially over background regions (see Figure 1 for an example). The same updated PCA SO2 retrieval algorithm (Li et al., 2020) is also used to produce the recently released OMSO2 V2 product (doi:10.5067/Aura/OMI/DATA2022). The new OMPS_NPP_NMSO2_PCA_L2 V2 product thus offers enhanced consistency between the NASA EOS standard (OMI) and continuity (OMPS) SO2 data recordsSulfur Dioxide (SO2) is a short-lived gas primarily produced by volcanoes, power plants, refineries, metal smelting and burning of fossil fuels. Where SO2 remains near the Earth's surface, it is toxic, causes acid rain, and degrades air quality. Where SO2 is lofted into the free troposphere, it forms aerosols that can alter cloud reflectivity and precipitation. In the stratosphere, volcanic SO2 forms sulfate aerosols that can result in climate change.

restrictednotspecifiedApr 2025View details →
nasa28/100

GHRSST Level 3C Atlantic sub-skin Sea Surface Temperature from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) on MSG at 0 degree longitude (GDS V2) produced by OSI SAF

A Group for High Resolution Sea Surface Temperature (GHRSST) dataset for the Eastern Atlantic Region from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) on the Meteosat Second Generation (MSG-3) satellites (launched 5 July 2012). The European Organization for the Exploitation of Meteorological Satellites (EUMETSAT),Ocean and Sea Ice Satellite Application Facility (OSI SAF) is producing SST products in near realtime from MSG/SEVIRI. SEVIRI level 1.5 data are acquired at Meteo-France/Centre deMeteorologie Spatiale (CMS) through the EUMETSAT/EUMETCAST system. SST is retrievedfrom the SEVIRI infrared channels (10.8 and 12.0 micrometer) using a multispectral algorithm.Atmospheric profiles of water vapor and temperature from a numerical weather prediction model,together with a radiatiave transfer model, are used to correct the multispectral algorithm forregional and seasonal biases due to changing atmospheric conditions. Every 15 minutes slot isprocessed at full satellite resolution. The operational products are then produced by remappingover a 0.05 degree regular grid (60S-60N and 60W-60E) SST fields obtained by aggregating all 15minute SST data available in one hour time, and the priority being given to the value the closest intime to the product nominal hour. The product format is compliant with the GHRSST DataSpecification (GDS) version 2.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sounder SIPS: AQUA AIRS IR + MW Level 2 CLIMCAPS: Cloud Cleared Radiances V2 (SNDRAQIML2CCPCCR) at GES DISC

The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder) and AMSU (Advanced Microwave Sounding Unit). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS in combination with the AMSU constitutes an innovative atmospheric sounding group of infrared and microwave sensors. The AIRS Standard Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km. Cloud-Cleared Radiances contain calibrated, geolocated channel-by-channel AIRS infrared radiances (milliWatts/m2/cm-1/steradian) that would have been observed within each AMSU footprint if there were no clouds in the FOV.An AIRS granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track for each of the approximate 2378 channels. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.

restrictednotspecifiedApr 2025View details →
nasa28/100

ATom: Measurements from Airborne Tropospheric Hydrogen Oxides Sensor (ATHOS), V2

This dataset provides the mixing ratios of hydrogen oxides measured by the Airborne Tropospheric Hydrogen Oxides Sensor (ATHOS) during the ATom 1-4 campaigns. ATHOS uses laser-induced fluorescence (LIF) to measure hydroxide (OH) and hydroperoxyl (HO2) simultaneously. The measurements include OH and HO2 mixing ratios and the OH interference determined by chemical removal of OH. The reactivity of OH is measured by the OH Reactivity (OHR) instrument using the discharge flow method and is integrated into the ATHOS electronics. These data provide insights into the oxidative state of the global atmosphere. These data are useful for testing the oxidation chemistry in models and other analytical methods being developed to deduce the atmosphere's oxidative state.

restrictednotspecifiedApr 2025View details →
nasa28/100

ATom: Actinic Flux and Photolysis Frequencies from CAFS Instrument, 2016-2018, V2

This dataset contains actinic flux and photolysis frequencies for photodissociation reactions for a variety of chemical species during the four ATom campaigns. Spectrally resolved actinic flux was measured by the down- and up-welling Charged-coupled device Actinic Flux Spectroradiometers (CAFS) from approximately 280-650 nm. Photolysis frequencies were calculated from the actinic flux and published cross sections and quantum yield values for atmospherically relevant molecules. Solar radiation drives the chemistry of the atmosphere, including the evolution of ozone, greenhouse gases, biomass burning, and other anthropogenic and natural trace constituents.

restrictednotspecifiedApr 2025View details →
nasa28/100

Sentinel-5P TROPOMI Radiance product band 1 (UV detector) L1B 5.5km x 21km V2 (S5P_L1B_RA_BD1_HiR) at GES DISC

Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.For data before August 6th of 2019, please check S5P_L1B_RA_BD1_1 data collection.The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm).TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.

restrictednotspecifiedApr 2025View details →
nasa28/100

LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC) V2.3.2015

The LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC) contains a variety of gridded climatologies of total lightning flash rates obtained from two lightning detection sensors - the spaceborne Optical Transient Detector (OTD) on Orbview-1 and the Lightning Imaging Sensor (LIS) onboard the Tropical Rainfall Measuring Mission (TRMM) satellite. The long LIS (equatorward of about 38 degree) record makes the merged climatology most robust in the tropics and subtropics, while the high latitude data is entirely from OTD. The LRFC dataset include flash rate climatology data including raw and scaled flashes on a 2.5 degree grid in HDF and netCDF-4 format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM GROUND VALIDATION ADVANCED MICROWAVE PRECIPITATION RADIOMETER (AMPR) IPHEX V2

The GPM Ground Validation Advanced Microwave Precipitation Radiometer (AMPR) IPHEx dataset was acquired by the AMPR instrument flown aboard the high altitude ER-2 aircraft during the IPHEx field campaign in North Carolina from May 1, 2014 through June 14, 2014. The goal of IPHEx was to evaluate the accuracy of satellite precipitation measurements and use the collected data for hydrology models in the region. These files include the Level 2B calibrated and georeferenced brightness temperature for the four AMPR-observed frequencies (10, 19, 37, 85 GHz). These data are archived in a netCDF-4 format that contains the calibrated brightness temperatures in addition to ER-2 aircraft navigation and instrument scene georectification variables. Corresponding browse imagery are also available in JPG format. A set of Python software has been developed for reading, plotting, and providing some additional analysis capabilities.

restrictednotspecifiedApr 2025View details →
nasa28/100

GLDAS Catchment Land Surface Model L4 3 hourly 1.0 x 1.0 degree V2.0 (GLDAS_CLSM10_3H) at GES DISC

NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products.This data set, GLDAS-2.0 1.0 degree 3-hourly, contains a series of land surface variables simulated from the Catchment Land Surface Model 3.6 in Land Information System (LIS) Version 7. The data set currently cover from January 1948 to December 2014, but will be extended as the forcing data becomes available. The GLDAS-2.0 data are archived and distributed in netCDF format. The GLDAS-2.0 model simulations were initialized on January 1, 1948, using soil moisture and other state fields from the LSM climatology for that day of the year. The simulations were forced by the global meteorological forcing data set from Princeton University (Sheffield et al., 2006). Each simulation uses the common GLDAS data sets for land water mask (MOD44W: Carroll et al., 2009) and elevation (GTOPO30) along with the model default land cover and soils datasets. Catchment model uses the Mosaic land cover classification and soils, topographic, and other model-specific parameters were derived in a consistent manner as in the NASA/GMAO’s GEOS-5 climate modeling system. The MODIS based land surface parameters are used in the current GLDAS-2.0 and GLDAS-2.1 products.In October 2020, all 3-hourly and monthly GLDAS-2 data were post-processed with the MOD44W MODIS land mask. Previously, some grid boxes over inland water were considered as over land and, thus, had non-missing values. The post-processing corrected this issue and masked out all model output data over inland water; the post-processing did not affect the meteorological forcing variables. More information can be found in the GLDAS-2 README. The MOD44W MODIS land mask is available on the GLDAS Project site.If you had downloaded the GLDAS data prior to November 2020, please download the data again to receive the post-processed data.

restrictednotspecifiedApr 2025View details →
nasa28/100

NLDAS Secondary Forcing Data L4 Monthly 0.125 x 0.125 degree V2.0 (NLDAS_FORB0125_M) at GES DISC

This data set contains the monthly secondary forcing data "File B" for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from Jan 1979 to the present. The temporal resolution is monthly. The file format is netCDF (converted from the GRIB format). The NLDAS-2 monthly secondary forcing data were generated from the NLDAS-2 hourly secondary forcing data, as monthly accumulation for precipitation and convective precipitation and monthly average for other variables. Monthly period of each month is from 00Z at start of the month to 23:59Z at end of the month. The one exception to this is the first month (Jan. 1979) that starts from 00Z 02 Jan 1979, except for the monthly accumulated precipitation and convective precipitation that both start from 12Z 01 Jan 1979. The monthly land surface forcing fields for NLDAS-2 are grouped into two files, "File A" and "File B". "File B" is the secondary (optional) forcing file and contains ten meteorological forcing fields. Details about the generation of the NLDAS-2.0 forcing datasets can be found in Xia et al. (2012).

restrictednotspecifiedApr 2025View details →
nasa28/100

NLDAS VIC Land Surface Model L4 Monthly 0.125 x 0.125 degree V2.0 (NLDAS_VIC0125_M) at GES DISC

This data set contains forty-three fields simulated from the VIC land-surface model (LSM) for Phase 2 of the North American Land Data Assimilation System (NLDAS-2). The data are in 1/8th degree grid spacing and range from January 1979 to present. The temporal resolution is monthly. The file format is netCDF (converted from GRIB format). The NLDAS-2 monthly Noah model data were generated from the NLDAS-2 hourly Noah model data, as monthly accumulation for rainfall, snowfall, subsurface runoff, surface runoff, total evapotranspiration, snow melt, and monthly averages for other variables. Each monthly period is from 00Z at start of the month to 23:59Z at end of the month, with the exception of the very first month in the data set (January 1979), which starts at 00Z 02 January 1979. Also, for the first month (January 1979), since the variables listed as instantaneous in the README file do not have valid data exactly on 00Z 02 January 1979, this one hour is not included in the average for this one month. Details about the NLDAS-2 configuration of the VIC LSM can be found in Xia et al. (2012).

restrictednotspecifiedApr 2025View details →
nasa28/100

Global MODIS and FLUXNET-derived Daily Gross Primary Production, V2

This dataset provides global gridded daily estimates of gross primary production (GPP) and uncertainties at 0.05-degree resolution for the period 2000-03-01 to the recent past. The GPP was derived from the MODerate-resolution Imaging Spectroradiometer (MODIS) instruments on the NASA Terra and Aqua satellites using the MCD43C4v006 Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectances (NBAR) product as input to neural networks that were used to globally upscale GPP estimated from selected FLUXNET 2015 eddy covariance tower sites. Additional data will be added periodically.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.