Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
3,669
datasets available to search
ShareScore release 0.9.0
Dataset results
3,669 results for “Lasers”
Effect of biological colonization on ceramic roofing tiles by lichens and a combined laser and biocide procedure for its removal.
<p>Biodeterioration damage is an important issue in conservation and restoration of built heritage, especially when ceramic materials are used. Biological colonization of ceramic roofing tiles by lichens is a common phenomenon. However, there are no reports to date of lichens removal from unglazed roofing tiles for conservation purposes. This paper for the first time reveals the results of a combined procedure undertaken to assess the removal of lichens on different kinds of unglazed ceramic roofing tiles by treatments based on both dual sequential laser irradiation and treatment using Acticide<sup>® </sup>CF biocide. Three species of lichens were identified: <em>Verrucaria nigrescens</em>, <em>Calogaya decipiens</em> and <em>Pyrenodesmia teicholyta</em>. The chemical and mineralogical composition of roofing tiles were characterized by X-ray fluorescence (XRF) spectrometry, optical polarized petrographic microscopy, and X-ray diffraction (XRD). Laser irradiation was accomplished by applying sequences of nanosecond laser pulses at two wavelengths (1064 and 266 nm). After dual sequential laser irradiation a biocide was applied. To assess the combined effect of both treatments several techniques were used, including stereo and fluorescence (FM) microscopies, scanning (SEM) and transmission (TEM) electron microscopies, and FT-Raman spectroscopy. Chemical composition of the analyzed roofing tiles was shown as a relevant factor regarding the degree of interaction between the biological colonization and the substrate, and hence, the bioweathering effect. The combined procedure has proved to be very effective in removing some lichen thalli and damaging completely the bionts in all species.</p>
Analysis of heritage stones and model wall paintings by pulsed laser excitation of Raman, laser-induced fluorescence and laser-induced breakdown spectroscopy signals with a hybrid system
<p>Laser based analysis of artworks benefits from the development of hybrid instruments where a single laser source serves to excite fluorescence, Raman and laser induced breakdown spectroscopy (LIBS) signals. Laser induced fluorescence (LIF) and Raman spectra provide information at the molecular level, while LIBS serves for identifying the elemental composition of the substrate under consideration. Studies using several excitation wavelengths on different types of materials and substrates help to develop and establish these hybrid systems for the conservation of artworks.</p>
Optical Emission and Reflection Data for Melting Regime Classification in Laser Powder Bed Fusion of 316L Stainless Steel and Ti-6Al-4V
<p>This dataset and accompanying code repository contain the experimental data and analysis scripts used in the study of real-time melting regime classification in Laser Powder Bed Fusion (LPBF) processes. The data includes optical sensor measurements (emission and reflection) collected during LPBF printing of 316L stainless steel and Ti-6Al-4V specimens, along with corresponding process parameters.</p>
Visual, thermal, chemical, and stable isotope effects of near-infrared laser cutting on freezer ice
<p>This dataset includes visible-light and thermal imaging video of tap water ice being cut with millisecond-range pulses of 1070 nm laser light, as well as stable isotope and chemical (commonly-used ion species) composition data of ice samples frozen from Fiji bottled water and South Pole 1980 meltwater.</p> <p>This is a copy of the dataset published to USAP-DC, which requires that visitors arrange a download by email. The only changes are that the subdirectories have each been zipped—as Zenodo does not, at time of writing, support directories—and the .docx version of the README file has been omitted.</p>
Laser cooling a centimeter-scale torsion pendulum
<p>We laser cool a centimeter-scale torsion pendulum to a temperature of 10 mK (average occupancy of 6000 phonons) starting from room temperature (equivalent to ~10^8 phonons). This is achieved by optical radiation pressure forces conditioned on a quantum-noise-limited optical measurement of the pendulum’s angular displacement with an imprecision 13 dB below that at the standard quantum limit (SQL). The measurement sensitivity is the result of a novel ‘mirrored’ optical lever that passively rejects extraneous spatial-mode noise by 60 dB. The high mechanical quality (10^7) and quantum-noise-limited sub-SQL measurement imprecision demonstrate the necessary ingredients for realizing the quantum ground state of torsional motion — a pre-requisite for mechanical tests of gravity’s alleged quantum nature.</p>
Raw data from Fast generation of a metamodel for conduction mode melt pool dimensions in Laser Powder Bed Fusion
<p>This is the raw data repository for the submission of the Manuscript <span>"Fast generation of a metamodel for conduction mode melt pool dimensions in Laser Powder Bed Fusion"</span></p>
Simple, highly-stable transfer cavity for laser stabilization based on a carbon-fiber reinforced polymer spacer
<p>Data corresponding to the article "Simple, highly-stable transfer cavity for laser stabilization based on a carbon-fiber reinforced polymer spacer"</p>
Data used in the paper "Operation of Photo Electron Spectrometers for Non-Invasive Photon Diagnostics at the European X-ray Free Electron Laser"
<p>Data recorded for the experiment at the European XFEL are available at <strong>doi:10.22003/XFEL.EU-DATA-900072-00, </strong><strong>doi:10.22003/XFEL.EU-DATA-900073-00, </strong><strong>doi:10.22003/XFEL.EU-DATA-900268-00, </strong><strong>doi:10.22003/XFEL.EU-DATA-900307-00, and </strong><strong>doi:10.22003/XFEL.EU-DATA-900405-00</strong>.</p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p>
Influence of Feedback Phase on Time Delay Signature and Chaos Bandwidth in a Laser subject to Dual Optical Feedback
<p>This archive provides all the data and information needed to reproduce the simulation results from the paper titled "Influence of Feedback Phase on Time Delay Signature and Chaos Bandwidth in a Laser subject to Dual Optical Feedback". You can access the paper on ArXiv: https://arxiv.org/abs/2311.14449</p> <p> </p> <p> </p>
Dataset for: Dynamically patterning X-ray beam by a femtosecond optical laser
<p>This record contains the image and plot data for the paper "Dynamically patterning X-ray beam by a femtosecond optical laser".</p>
Acoustic Emission Dataset for Multi-Laser LPBF Systems: Supporting DUAL DISCO Signal Processing Technique
<p>This dataset contains acoustic emission (AE) signals collected during experiments with multi-laser Laser Powder Bed Fusion (LPBF) systems. The data supports the research presented in the paper titled "DUAL DISCO: A Novel Approach to Acoustic Emission Monitoring in Multi-Laser LPBF Systems." The dataset is designed to facilitate the development and validation of advanced signal processing techniques, specifically the DUAL DISCO method, which aims to disentangle and analyze AE signals from simultaneous laser operations.</p> <p><strong>Contents:</strong></p> <ul> <li> <p><strong>Raw_data.zip:</strong> This file contains the AE signals used for training. The data was recorded using two condenser microphones positioned around the LPBF build plate, capturing signals from both sequential and simultaneous laser operations across various melting regimes (conduction and keyhole modes).</p> </li> <li> <p><strong>Raw_data_test.zip:</strong> This file includes the AE signals used for testing, recorded under different experimental conditions to evaluate the generalization capabilities of signal processing algorithms.</p> </li> <li> <p><strong>params.xlsx:</strong> This spreadsheet provides the ground truth labels for the training data, indicating the melting regime (conduction or keyhole) for each signal in Raw_data. </p> </li> <li> <p><strong>params_test.xlsx:</strong> This spreadsheet contains the ground truth labels for the test data, similarly indicating the melting regime for each signal in Raw_data_test.</p> </li> </ul> <p><strong>Applications:</strong></p> <p>This dataset is intended for researchers and practitioners in the field of additive manufacturing and signal processing. It can be used to:</p> <ul> <li>Develop and test new algorithms for AE signal processing in multi-laser LPBF systems.</li> <li>Explore the acoustic characteristics of different melting regimes.</li> <li>Enhance the understanding of process monitoring techniques in additive manufacturing.</li> </ul> <p><strong>Acknowledgments:</strong></p> <p>The dataset was collected using the AddUp FormUp 350 machine and is part of a research project supported by the Bern Economic Development Agency. Special thanks to Thomas Rytz for technical support.</p>
GaAs nano-ridge laser diodes fully fabricated in a 300 mm CMOS pilot line
<p>Available data for "GaAs nano-ridge laser diodes fully fabricated in a 300 mm CMOS pilot line", Nature <strong>637</strong>, 63–69 (<span>2025</span>).</p> <p>DOI of original paper: <a href="https://doi.org/10.1038/s41586-024-08364-2">https://doi.org/10.1038/s41586-024-08364-2</a></p> <p>URL of original paper: <a href="https://www.nature.com/articles/s41586-024-08364-2">https://www.nature.com/articles/s41586-024-08364-2</a></p> <p>Execution tested with Python3.11 or newer on Windows 11. Unzip folder to access files.</p> <p>For Figures and Extended data Figures execute "plotfig<em>.py" or "</em>plotextdatafig*.py"</p> <p>Raw data for figure xx is stored in corresponding folder .\rawdatafigxx and subfolder, if any, and is called during plotfigxx.py script execution.</p> <p>Check in README.txt file Python packages requirements.</p> <p>Contact charles.caer@csem.ch if problems with python code arise. <br>All python code and data remain under copyright by the authors, imec and are solely provided to be used to reproduce the figures of the aforementioned paper.</p> <p> </p>
Dataset used in "Deamidation analysis of Therapeutic Drugs using Matrix-assisted Laser Desorption Ionization Mass Spectrometry and A Novel Algorithm QuanDA"
<p><span>Overview</span></p> <p><span>Theoretical MALDI spectra of peptides, both before and after deamidation, are crucial for the analysis of real samples. QuanDA is a method utilizing non-negative least squares to calculate the percentage of deamidation during the aging process of standard peptides and therapeutic drugs.</span></p> <p><span>Dataset Description</span></p> <p><span>The `data` directory contains example datasets specifically designed for analyzing peptide deamidation:</span></p> <p><span>D.txt: Simulated spectra of the pure synthetic peptide Pep-D.</span></p> <p><span>N.txt: Simulated spectra of the pure synthetic peptide Pep-N.</span></p> <p><span>Asn2Asp18: Contains 10 measurements from a sample comprising 10% Pep-N and 90% Pep-D.</span></p> <p><span>Asn18Asp2: Comprises 10 measurements from a sample with 90% Pep-N and 10% Pep-D.</span></p> <p><span>Peptide Sequences: Pep-N: YTHQGLSSPVTKSFNRGE; Pep-D: YTHQGLSSPVTKSFDRGE</span></p> <p><span>These synthetic peptides are utilized to investigate deamidation behavior.</span></p> <p><span>Somatostatin Dataset: Contains data from actual samples analyzed over 0-13 days under physiological conditions (pH 7.4, 37°C) and storage conditions (pH 4, 4°C). This dataset includes theoretical values before and after deamidation.</span></p>
IODP Expedition 356 Laser height profile (section half)
Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.
Point cloud from terrestrial laser scanning of a coppiced beech tree (Fagus sylvatica) in Wytham Woods, UK
<p>Point cloud of an old beech coppice stool located in Wytham Woods, UK. </p> <p>A 3D model of the tree can be found <a href="https://skfb.ly/6WLqp">here</a> on SketchFab.</p> <p>Data was captured on 20/4/2021 with a RIEGL VZ-400 terrestrial laser scanner from 6 scan locations around the tree. The weather was good, with little to no noticeable wind. Data is a binary PLY format with reflectance, deviation and PCV fields as well as RGB. Note this data set still includes some ground returns.</p> <p>Please acknowledge the data set authors if using this data.</p>
Figure 3 in Confocal laser scanning microscopy analysis of the phalloidin-labelled musculature in nemerteans
Figure 3. Confocal projections of the longitudinal sections of the body wall musculature showing diagonal muscles (A–E) and fascias of the extracellular matrix (F, arrows), dorsal view. (A) Carinina sp., precerebral region; (B) Hubrechtella juliae, just behind mouth; (C) Cephalothrix cf. simula, just behind mouth; (D) Tetrastemma sp., middle body region; (E) Quasitetrastemma stimpsoni, middle body region; (F) Collarenemertes bimaculata, middle body region. Abbreviation: gp, gonopore. Scales: 50 µm.
Figure 5 in Confocal laser scanning microscopy analysis of the phalloidin-labelled musculature in nemerteans
Figure 5. Confocal projections of the transversal (A, B) and longitudinal (C–I) sections of the proboscis. Anterior (A–D, F, G) and middle (E, H, I) proboscis portions. (A, B), everted proboscis of Cerebratulus marginatus; (C) third proboscis region of Callinera sp.; (D) longitudinal and diagonal musculature in region of muscle cross (arrows) of Nipponomicrura uchidai; (E) bulb region of Emplectonema gracile; (F, G) anterior proboscis region of Ototyphlonemertes martynovi (F) and Ototyphlonemertes valentinae (G); (H, I) middle proboscis region of Ototyphlonemertes martynovi (H) and Ototyphlonemertes valentinae (I). Abbreviations: as, anterior sphincter; cm, circular musculature; dm, diagonal musculature; ge, glandular epithelium; icm, inner circular musculature; lm, longitudinal musculature; ls, longitudinal muscle strand; mc, muscle cross; pms, posterior muscle sheath. Scale: (A), 200 µm; (B–E, G), 50 µm; (F, H, I), 20 µm.
Figure 7 in Confocal laser scanning microscopy analysis of the phalloidin-labelled musculature in nemerteans
Figure 7. Confocal projections of the longitudinal sections of gonadal sac musculature. (A, B, E, F) mature ovaries of Emplectonema gracile (A), Antarctonemertes varvarae (B), Tetrastemma sp. (E), and Malacobdella grossa (F), ventral view; (C) immature testis of Antarctonemertes varvarae, ventral view; (D) gonopore of Tetrastemma sp., dorsal view. Abbreviation: gp, gonopore; lm, longitudinal body musculature. Scale: (A–E), 50 µm; (F), 100 µm.
Figure 2 in Confocal laser scanning microscopy analysis of the phalloidin-labelled musculature in nemerteans
Figure 2. Confocal projections of the longitudinal (A–D) and transversal (E) sections showing dermal musculature. (A, B) Cerebratulus marginatus, just behind mouth, dorsal view (A), precerebral region, dorsal view (B); (C) Lineus alborostratus, just behind mouth, dorsal view; (D, E) Hubrechtella juliae, brain region, dorsal view (D), transversal section through the brain region showing connection of the dermal and outer circular muscles (arrows) (E). Abbreviations: br, brain; cdm, circular dermal muscles; em, epidermal muscle processes; lm, longitudinal musculature; pr, proboscis. Scales: 50 µm.
Figure 6 in Confocal laser scanning microscopy analysis of the phalloidin-labelled musculature in nemerteans
Figure 6. Schematic diagrams of the body wall musculature (A–C) and proboscis musculature (D–F). (A) Tubulanid palaeonemerteans; (B) heteronemerteans; (C) hoplonemerteans; (D, D̓) palaeonemerteans (D, Cephalothrix; D̓, Carinoma); (E) Ototyphlonemertes valentinae; (F) lineid nemerteans (only outer circular and diagonal musculature). Abbreviations: ddm, diagonal dermal muscles; dm, diagonal muscles; icm, inner circular musculature; ilm, inner longitudinal musculature; ldm, longitudinal dermal muscles; lm, longitudinal musculature; ls, longitudinal muscle strand; mc, muscle cross; mcm, middle circular musculature; ocm, outer circular musculature; olm, outer longitudinal musculature; rem, radial epidermal muscles.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.