Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
82
datasets available to search
ShareScore release 0.9.0
Dataset results
82 results for “arxiv”
Dataset for the manuscript "Realization of an atomic quantum Hall system in four dimensions", arXiv:2210.06322
<p>Dataset for the manuscript "Realization of an atomic quantum Hall system in four dimensions", arXiv:2210.06322</p>
Data: Gradient expansions for the large-coupling strength limit of the Møller-Plesset adiabatic connection (arXiv:2111.13146)
<p>Data corresponding to the work <em>Gradient expansions for the large-coupling strength limit of the Møller-Plesset adiabatic connection</em> (https://arxiv.org/abs/2111.13146). </p> <p>The zip file contains:</p> <p>- Data for the functional E_el and W_1/2 for all the systems presented in the article (.csv files)</p> <p>- Minimising positions for all the systems presented in the article (.csv files)</p> <p>- Checkpoint Files for all the calculations done with PySCF 1.7.6.</p>
Data for the Scotogenic and EW-ino results presented in "Constraining new physics with SModelS version 2" (arxiv: 2112.00769 )
<p>Data used for the results presented in "Constraining new physics with SModelS version 2" (arXiv: <a href="https://arxiv.org/abs/2112.00769">2112.00769</a>).</p> <p>The following data files are available:</p> <ol> <li>EWinoData.tar.gz: contains the SLHA files for the random scan over the electroweak-ino parameter space. The tarball also contains the SModelS and Micromegas results for the corresponding points.</li> <li>ScotoScalarDMData.tar.gz: contains the SLHA files for the scan over the scotogenic model with a scalar DM candidate (neutral CP-even Higgs). The tarball also contains the SModelS results for the corresponding points.</li> <li>ScotoFermionDMData.tar.gz: contains the SLHA files for the scan over the scotogenic model with a fermionic DM candidate (lightest right-handed neutrino). The tarball contains 2 folders containing the SLHA files and the SModelS output. Each folder has the following structure: <ul> <li>mhc_<electronic/muonic/mixed>_decays: scenario with the charged Higgs decaying with a 100% BR to electron+N<sub>1</sub> muon +N<sub>1 </sub>or 50% BR to each (electron/muon) flavor <ul> <li>deltam_<5/50>: scenario with a 5 (50) GeV mass difference between the scalars. </li> </ul> </li> </ul> </li> </ol> <p> </p> <p>More details about the scans can be found in arXiv:<a href="https://arxiv.org/abs/2112.00769">2112.00769</a> .</p>
Keyword frequencies in arXiv and SSRN working papers
<p>The dataset contains the raw results of the trend analysis performed on two working paper repositories: ArXiv and SSRN.</p> <p>ArXiv: the dataset consists of working papers acquired via ArXiv’s API (<a href="https://arxiv.org/help/api/index">https://arxiv.org/help/api/index</a>). Working papers have been collected from the Computer Science discipline (all CS categories)</p> <p>SSRN (The Social Science Research Network): Working papers have been collected from two broad categories: 1. Information Systems & eBusiness, 2. Innovation. </p> <p>For each repository, there are two separate analyses: for the period 2016.01-2019.12 and for 2020.01-2020.06 (COVID-19).</p> <p>Methodology:</p> <ul> <li>Frequency of appearances for all unigrams and bigrams in the texts</li> <li>Frequency: number of appearances of every term divided by the number of all terms (for every month and in case of COVID - every week due to the shorter time period) </li> <li>Average monthly / weekly change in the analised term's frequency is calculated by OLS regressions</li> <li>The dependent variable of the estimation is the frequency index, while the number of months since the beginning of the analysed period (January 2016) is the independent variable (in the case of COVID: weeks since January 2020)</li> <li>The regression coefficient (referred to as coef) shows by how much on average the analysed expression’s frequency changed with every observed week (marginal change of the frequency), revealing which keywords had the biggest weekly growth</li> </ul> <p> </p> <p> </p>
Observational Dataset for "Constraining Global Coronal Models with Multiple Independent Observables", Badman et al. (2022). Arxiv : https://arxiv.org/abs/2201.11818
<p>Observational Dataset for "Constraining Global Coronal Models with Multiple Independent Observables", Badman et al. (2022). Arxiv : https://arxiv.org/abs/2201.11818</p> <p>-----------------------------<br> -----------------------------</p> <p>Contact : Samuel T. Badman (he/him) samuel_badman@berkeley.edu, Space Sciences Lab, UC Berkeley.</p> <p>-----------------------------<br> -----------------------------</p> <p>License : Creative Commons Attribution 4.0 International</p> <p>-----------------------------<br> -----------------------------</p> <p>Research Goal of Dataset : Data supports the above titled work in defining a framework for evaluating the magnetic structure of global coronal models via the evaluation of three single valued metrics. This repository contains observational data products used as input for the studies described in this work with the aim to allow external coronal modelers to reproduce and evaluate their own work against the same dataset we used.</p> <p>-----------------------------<br> -----------------------------</p> <p>Structure of files : This repository contains three subfolders each containing observational data relating to the three metrics defined in Badman et. al. (2022). These are :</p> <p>-----------------------------</p> <p>1) ``Metric1_EUVCarringtonMaps''</p> <p>Content :</p> <p><carr_maps.####.final.h5> : Carrington maps of extreme ultraviolet (EUV) emission as observed by the SDO/AIA. These files contain slices of different wavelengths together, saved in hdf5 format. Maps for Carrington rotations (#### = 2210,2215,2216,2221) span the time intervals of interest in the associated work. The 193 angstrom wavelength slice from these maps were used as input into the EZSEG algorithm (see manuscript text) to generate ``observations'' of coronal hole boundaries which can then be compared via binary classification to modeled open field boundaries.</p> <p><read_plot_example_metric1.py> : A python script which demonstrates reading in the hdf5 files and viewing the names of the different slices, then plots the 193 slice. The slice name of primary interest is 193A ('map_0193'), but slices at 171,211 angstrom, and a magnetogram are included.</p> <p>-----------------------------</p> <p>2) ``Metric2_StreamerBelt''</p> <p><read_plot_example_metric2.py> : A python script which demonstrates reading and plotting an example white light carrington map from this data set, as well as overplotting the downstream data extraction of the streamer maximum brightness (SMB) line.</p> <p><br> 2a) ``Metric2_StreamerBelt/WL_CarringtonMaps''</p> <p>Content :</p> <p><WL_CRMAP_YYYYMMDDTHHmmSS_LC2_5p0Rs.fits> : Carrington maps of white light intensity extracted at 5.0Rs altitude using coronagraph images taken by SOHO/LASCO, using the method described in the manuscript and Poirier et al. (2021). Maps at a daily cadence over each 60 day time interval studied in the manuscript are included here, incorporating the new data available as the sun rotated. Here saved as fits files.</p> <p><WL_CRMAP_YYYYMMDDTHHMMSS_LC2_5p0Rs.mat> : Carrington maps as above but saved in .mat format (MATLAB).</p> <p>2b) ``Metric2_StreamerBelt/SMB_Line_Extractions''</p> <p><C2_YYYMMDDHHmmSS_5.0Rs_SMB.ascii> : Downstream processed versions of the relevant White light carrington map from which the line of maximum brightness (SMB line) has been extracted, as well as the streamer belt "thickness" at each longitude. This is tabulated as a 3d coordinate gridded evenly in longitude, and each SMB grid point as a northwards and southwards thickness, tabulated in degrees. These data are described in the header of each file and the extraction process is described in detail in the manuscript.</p> <p>-----------------------------</p> <p>3)Metric3_InSituTimeSeries</p> <p>Content :</p> <p><E##_XYZ_polarity.txt> : In situ polarity timeseries for 60 day intervals at 1 hour cadences during PSP encounters ## = [01,02,03], measured by spacecraft XYZ = [PSP,STA,OMN], Parker Solar Probe, STEREO A and OMNI (Earth-L1 dataset). Data values are +/- 1 indicating if magnetic vector is directed sunward or antisunward for each hour. This value is determined as described in the main text by finding the peak of a histogram of 1D B_R values over that hour interval and taking its sign.</p> <p><read_plot_example_metric3.py> : A python script which demonstrates reading in the in situ timeseries for encounter 1 and plotting them.</p> <p><gen_ss_footpoints_psp.py> : A python script which demonstrates an open source method to produce source surface footpoints for a given spacecraft (here PSP) which can be used to sub-sample a HCS map provided by a modeler to generate a modeled time series which can be used to produce scores for metric 3 described in the associated manuscript.</p> <p>-----------------------------<br> -----------------------------</p> <p>Python scripts included in this dataset use python packages</p> <p>astropy - https://github.com/astropy/astropy<br> h5py - https://github.com/h5py/h5py<br> astrospice - https://github.com/dstansby/astrospice<br> matplotlib - https://github.com/matplotlib/matplotlib<br> sunpy - https://github.com/sunpy/sunpy</p> <p> </p> <p> </p>
Data for arXiv:2204.02367
<p>Raw data for figures (Fig. 2, 3, and S1) in publication arXiv:2204.02367.</p> <p> </p>
Raw Data to 'Experimental verification of the area law of mutual information in quantum field theory', arXiv:2206.10563
<p><strong>Absorption images representing the raw data for arXiv:2206.10563</strong></p> <p>'scan5722.zip' contains the raw data for figures 2 and 3.</p> <p>'scan5831.zip' and 'scan9617.zip' contain the raw data for figure 5, right and left, respectively.</p> <p>All three datasets, 9617, 5722, and 5831, are used to obtain the data points in figure 4, from low to high temperatures.</p> <p> </p> <p><strong>Scans 5722 & 5831</strong></p> <p>The absorption images are numbered consecutively.</p> <p>The first image for scans 5722 and 5831 is taken along the axial (longitudinal) direction with our 'longitudinal' imaging system after 10 ms time of flight (TOF) to measure the atom number balance between the two wells. The measurement is performed before ramping up the DW barrier. Two images are taken in each cycle: One shot with atoms ('1-atomcloud.tif') and a second image to record the intensity of the imaging beam without atoms ('1-withoutatoms.tif'). These two pictures are used to extract the atomic density (see the Matlab script).</p> <p>The second image for scans 5722 and 5831 is taken in the direction of the double-well (DW) separation with our 'transverse' imaging system. The measurement is performed before ramping up the DW barrier. The image is taken after 11.2 ms TOF.</p> <p>The subsequent images record the interference fringes for the different evolution times (again, always pairs '-atomcloud.tif' and '-withoutatoms.tif'). They are taken with our 'vertical' imaging system after 15.6 ms TOF. The imaging direction is perpendicular to the weakly confined direction of the clouds and the DW separation.</p> <p>The recorded evolution times for scan 5722 are -1.9 ms (right before ramping up the DW barrier), 0 ms (right after the DW barrier is ramped up), and then in steps of 2.5 ms until 65 ms. This means that '3-atomcloud.tif' corresponds to -1.9 ms, and '30-atomcloud.tif' corresponds to 65 ms. This completes the 'first repeat'. The next two shots, '31-atomcloud.tif' and '32-atomcloud.tif', belong to the 'second repeat' and are again taken with the 'longitudinal' & 'transverse' imaging systems, respectively. The picture '33-atomcloud.tif' is again taken with the 'vertical' imaging and corresponds to -1.9 ms. And so forth.</p> <p>In the same way, the pictures scan 5831 are ordered. The evolution times (in ms) for these two scans are:</p> <p>scan 5722: -1.9 from 0 to 65 (in steps of 2.5)</p> <p>scan 5831: -1.8, from 0 to 65 (in steps of 2.5)</p> <p>The first time always corresponds to the instant right before the DW barrier is ramped up. 0 is always right after the barrier was ramped up.</p> <p> </p> <p><strong>Scan 9617</strong></p> <p>This scan only contains images with the 'vertical' imaging system with 15.6 ms TOF. The evolution times (in ms) are as follows:</p> <p>scan 9617: -2.8, from 0 to 15 (in steps of 1.5), 22, 25, 28</p> <p>The first time always corresponds to the instant right before the DW barrier is ramped up. 0 is always right after the barrier was ramped up.</p> <p>This means, that '1-atomcloud.tif', '16-atomcloud.tif', '31-atomcloud.tif' and so on correspond to -2.8 ms, and '15-atomcloud.tif', '30-atomcloud.tif', '45-atomcloud.tif' and so on correspond to 28 ms.</p> <p> </p> <p><strong>Matlab script</strong></p> <p>In addition to the data, a Matlab script (calc_atomic_density.m) illustrates how to extract the two-dimensional atomic density from the absorption images. It contains all relevant parameters of the imaging systems.</p>
ArXiv OAI-PMH arXivRaw publication metadata
<p>This dataset contains <a href="https://www.openarchives.org/pmh/">OAI-PMH</a> metadata for all <a href="https://arxiv.org/">ArXiv</a> publications up until 2024-04-23 in the <a href="http://arxiv.org/OAI/arXivRaw.xsd"><em>arXivRaw</em> XML format</a>.</p> <p>The metadata has been harvested using the <a href="https://github.com/miku/metha/releases/tag/v0.3.3"><em>metha</em> Go package v0.3.3</a> [1] on <a href="https://go.dev/"><em>go1.18</em></a>. Specifically, harvesting was run on a small HPC cluster using the following <a href="https://slurm.schedmd.com">SLURM</a> script. The script had to be scheduled twice due to the connection being reset by the peer (see <em>combined-slurm.out</em>). <em>metha</em> caters for these situations and is able to pick up where it left off with cumulative harvesting.</p> <pre><code>#!/bin/bash #SBATCH --job-name=metha #SBATCH --nodes=1 #SBATCH --cpus-per-task=1 #SBATCH --ntasks=1 #SBATCH --time=10-20:00:00 module purge echo "Installing Go module." module add go/go-1.18/go-1.18-gcc-9.4.0-okbjyoy echo "Installed Go module: $(go version)." echo "Installing metha." go install -v github.com/miku/metha/cmd/...@latest echo "Installed metha: $(<retracted>/go/bin/metha-sync -v)" echo "Harvesting ArXiv OAI-PMH metadata in format 'arXivRaw' from http://export.arxiv.org/oai2." <retracted>/go/bin/metha-sync -T 5m -base-dir /scratch/<retracted>/arxiv -format "arXivRaw" http://export.arxiv.org/oai2 # For the second run, '-from' was specified to pick up the harvest where it was left off. # <retracted>/go/bin/metha-sync -from 2020-09-29 -T 5m -base-dir /scratch/<retracted>/arxiv -format "arXivRaw" http://export.arxiv.org/oai2 echo "Done." exit 0</code></pre> <h2>Dataset contents</h2> <p>This deposit of the dataset contains the following files:</p> <ul> <li><strong>metha-output-OAI-PMH-arXivRaw-until-2024-03-24.tar.gz</strong>: an archive file containing the archive files (gzipped, <em>*.xml.gz</em>) produced by <em>metha</em>, which in turn contain the XML metadata files. The gzipped files contained in the archive are named following the pattern <em>YYYY-MM-DD-<8-digit zero-padded 0-index file count>.xml.gz</em>, e.g., <em>2024-03-24-00000001.xml.gz</em>.</li> <li><strong>README.md</strong>: This file, containing basic information about the dataset and deposit.</li> <li><strong>combined-slurm.out</strong>: The combined SLURM log for the two consecutive SLURM runs that have produced the dataset. Run-specific information has been retracted.</li> </ul> <h2>Reproducibility</h2> <p>As the OAI-PMH metadata is not static but may change at any time, this dataset isn't fully reproducible. However, running the same <em>metha</em> version on the same <em>go</em> version with the same commands should yield very similar results, but will contain newer metadata.</p> <h2>Licenses</h2> <ul> <li>All ArXiv OAI-PMH metadata is <a href="https://info.arxiv.org/help/license/index.html#metadata-license">licensed</a> under <a href="https://creativecommons.org/publicdomain/zero/1.0/deed">CC0-1.0</a>.</li> <li>combined-slurm.out is licensed under <a href="https://creativecommons.org/publicdomain/zero/1.0/deed">CC0-1.0</a>.</li> <li>README.md is licensed under <a href="https://creativecommons.org/publicdomain/zero/1.0/deed">CC0-1.0</a>.</li> </ul> <p>Licenses are documented in a machine-readble manner following the <a href="https://reuse.software/spec/">REUSE 3.0 Specification</a>. License deeds are included in this deposit as <em>.txt</em> files named using the respective SPDX license identifiers.</p> <p>[1] Martin Czygan, Thomas Gersch, ACz-UniBi, Justin Kelly, Gunnar Þór Magnússon, dvglc, & Natanael Arndt. (2024). miku/metha: v0.3.3 (v0.3.3). Zenodo. doi:<a href="https://doi.org/10.5281/zenodo.10940212">10.5281/zenodo.10940212</a>.</p>
Data and analysis scripts for arXiv:2407.09605
<p>Ancillary files for the paper "Soft-gluon exchange matters: isotropic screening in QCD kinetic theory" by K. Boguslavski and F. Lindenbauer<br>[<a href="https://inspirehep.net/literature/2807689" target="_blank" rel="noopener">arXiv:2407.09605</a>]</p> <p>If the data or scripts provided here are used, please cite this paper.</p>
Dummy upload for arXiv:1506.09008 supplementary data
<p>###Preamble###</p> <p>This upload contains initialization files and data for simulations reported in:<br> https://arxiv.org/abs/1506.09008: Coarse-grained modelling of strong DNA bending II: Cyclization</p> <p>The initialization files allow a user to repeat the reported simulations using the oxDNA model. oxDNA is available for download from:<br> https://dna.physics.ox.ac.uk/index.php/Main_Page. <br> The use and meaning of the input and output files are documented extensively on this wiki. </p> <p>This is only a practice upload, and so only a small part of the total material is included.</p> <p>###Organisation### </p> <p>Simulations are organised by system type. Folder DXXCYY corresponds to simulation of a cyclization system with Nd = XX and Nbp=YY, with the meaning of these symbols given in the text referenced above. "_seq" indicates simulation of a specific sequence, as listed in Table S1 of the reference.</p> <p>For each system, a "closed" and an "open" folder are present. These correspond to the two windows of umbrella sampling that were performed separately. </p> <p>###Content###</p> <p>Within each folder are the necessary initialization files to run the simulations exactly as reported in the reference above, simply by calling oxDNA from within the folder, using "inputVMMC" as the input file.</p> <p>Also included are output files for a single realisation of the simulation. </p> <p>Note that the results in the reference above were all obtained from 5 independent replicas, using different initial conditions and different seeds. These can be (statistically) recreated simply by drawing random starting configurations from the single available traj_hist file. </p> <p><br> </p>
The supplementary material for antenna transfer function (arXiv: 1901.09624)
<p>The angular response for interferometric space based gravitational wave detectors, enclosed files are 2d and 3d plots animations for the response function when the detector moves in the orbit. File names started with LISA/lisa are for LISA, those with TianQin/tq are for TianQin. </p>
Dirac gaugino benchmark points from arXiv:1812.09293
<p><strong>Benchmark points, in SUSY Les Houches Accord (SLHA) format</strong>, from the paper "LHC limits on gluinos and squarks in the minimal Dirac gaugino model", <strong><a href="http://arXiv.org/abs/arXiv:1812.09293">arXiv:1812.09293</a></strong>; for 2 TeV gluino and 2.6 TeV squark masses.</p> <p>We also provide the <strong>UFO</strong> and <strong>SPheno models</strong> (exported from <a href="https://sarah.hepforge.org">SARAH</a>), and the <a href="http://spheno.hepforge.org/">SPheno</a> <strong>input files</strong> for creating the DG benchmark points. For usage in SPheno, expand DiracGauginos_SPheno.zip to a folder "DiracGauginos" in the SPheno root directory and compile with</p> <p> <code>make Model=DiracGauginos</code></p> <p>This produces the library <code>./lib/libSPhenoDiracGauginos.a</code> and the executable <code>./bin/SPhenoDiracGauginos</code>. (Tested with SPheno-4.0.3)</p> <p>Note that compared to the version exported from <a href="https://sarah.hepforge.org">SARAH</a>, we have changed <code>InputOutput.f90</code> to have an SLHA1-like ordering of the squarks, so that, for instance, PDG 1000006 is always the lighter stop.</p> <p>The two additional scripts provided serve to add the QNUMBERS blocks and change "DECAY1L" to "DECAY" in the SLHA files. This is necessary for event generation with <a href="https://cp3.irmp.ucl.ac.be/projects/madgraph/">MadGraph5</a> / <a href="http://home.thep.lu.se/Pythia/">Pythia</a>.</p>
arXiv-ACM Dataset
<p>arXiv-ACM Dataset used in: Exploiting Label Dependencies for Multi-Label Text Classification Using Transformers </p>
Relative Phase Data to 'Experimental observation of curved light-cones in a quantum field simulator', arXiv:2209.09132
<p><strong>Relative phase profiles and averaged density profiles for the results shown in arXiv:2209.09132</strong></p> <p>Each file "phase_and_mean_density_scan_X.mat" contains data for a measurement presented in the manuscript, where "X" is the corresponding scan number.<br> The following table shows the relevant scan number to measurement descriptions mentioned in the manuscript (see Table S1 in the SI Appendix).</p> <table align="center"> <thead> <tr> <th scope="col">Measurement description</th> <th scope="col">Scan number</th> </tr> </thead> <tbody> <tr> <td> <p> Homogeneous (main text)</p> </td> <td> 9185</td> </tr> <tr> <td> <p> Inhomogeneous with sharp edges </p> </td> <td> 10419</td> </tr> <tr> <td> <p> Inhomogeneous with smoothed edges</p> </td> <td> 8935</td> </tr> <tr> <td> <p> Homogeneous 2 (SI Appendix)</p> </td> <td> 10455</td> </tr> </tbody> </table> <p> </p> <p><strong>File Contents</strong></p> <p>Each file contains the following variables:</p> <ul> <li>"phase": A MATLAB cell containing all the phase profiles for every time step. Thus, "phase{t_ind}" is a matrix where rows represent experimental realizations and columns the spatial grid points. For example, "phase{5}(1,:)" would be a one-dimensional phase profile, representing the first realization of the fifth time step. To learn more about the extraction of phase profiles, read Section 2 and see Fig. S5 in SI Appendix.</li> <li>"z_grid_phase_si": Vector. Grid points for phase profiles in SI units (m).</li> <li>"averaged_density_si": Vector. Averaged initial linear density in SI units (m^-1). See Fig. 1(a).</li> <li>"z_grid_density_si": Vector. Grid points for averaged density in SI units (m).</li> <li>"times_si": Vector. Time points in SI units (s).</li> </ul> <p> </p> <p><strong>Matlab script calculating the velocity field</strong></p> <p>In addition to the data, a MATLAB script (velocity_field_calculation.m) loads a data file and calculates the velocity field and its correlations following the equations in the manuscript:</p> <ul> <li>"u": MATLAB cell. Velocity field for every time step.</li> <li>"u_u_corr": MATLAB cell. Second-order correlations of the velocity field for every time step.</li> <li>"std_u_u_corr": MATLAB cell. Standard deviation of second-order correlations of the velocity field for every time-step.</li> </ul> <p>Finally, the script plots "u_u_corr" for all the time steps and plots the averaged linear density.</p>
unarXive: All arXiv Publications Pre-Processed for NLP, Including Structured Full-Text and Citation Network (open subset)
<h2><strong>Description</strong></h2><p>unarXive is a scholarly data set containing publications' structured full-text, annotated in-text citations, linked non-text content (mathematical notation, figure/table captions) and a citation network.</p><p>The data is generated from all LaTeX sources on <a href="https://arxiv.org/">arXiv</a> and therefore of higher quality than data generated from PDF files.</p><p>Typical uses are</p><ul><li>Training of ML models (citation recommendation, summarization, LLMs)</li><li>Citation context analysis</li><li>Bibliographic analyses</li></ul><h2><strong>Access</strong></h2><p>┏━━━━━━━━━━━━━━━━━━━━━━━━━━┓<br>┃ <a href="https://github.com/IllDepence/unarXive/raw/master/doc/unarXive_data_sample.tar.gz"><strong>D O W N L O A D S A M P L E</strong></a> ┃<br>┗━━━━━━━━━━━━━━━━━━━━━━━━━━┛</p><p>Regarding the full data set, please note the following:</p><blockquote><p><strong>Note</strong>: this Zenodo record is the "open subset" of unarXive, which contains all permissively licensed papers from arXiv.org. You can find the <a href="https://doi.org/10.5281/zenodo.7752754">full version here</a>.</p></blockquote><p>The code used for generating the data set is <a href="https://github.com/IllDepence/unarXive">publicly available</a>.</p>
Dataset associated to the publication NATASTRON-22125961A arXiv:2212.10924
<p># Dataset description</p> <p>1. Single stellar model grids at Zsun</p> <p>All single stellar model grids are labeled as "single_star_grid_Zsun_*.h5".<br> To access the dataset you should use the POSYDON v1 code and refer to the<br> code documentation, see https://github.com/POSYDON-code/POSYDON/releases/tag/v1.0.0.<br> The data can be accessed, e.g., with POSYDON as</p> <p>```py<br> from posydon.grids.psygrid import PSyGrid<br> grid = PSyGrid()<br> grid.load(path_to_grid)<br> print(grid.initial_values)<br> print(grid.final_values)<br> print(grid[0].history1['log_L'])<br> print(grid[0].history1['log_Teff'])<br> ```</p> <p>2. Binary black hole population at Zsun</p> <p>We provide the binary black hole population in the file labeled<br> "BBH_population_Zsun.h5". This file contains all binary systems forming<br> binary black holes as simulated from a population synthesis model of 50 million<br> binaries generated with POSYDON v1 at solar metallicity. The data can be<br> accessed, e.g., with Pandas as</p> <p>```py<br> import pandas as pd<br> df = pd.read_hdf('./data_release/source_data/BBH_population_Zsun.h5',<br> key='history')<br> df.head(10)<br> ```</p> <p>For convenience we also provide a dataset labeled "arXiv_2212.10924.csv.gz"<br> that contains the subset of merging binary black holes obtained from<br> "BBH_population_Zsun.h5" at the time of double compact object formation used to<br> generate the Figure 4 of the main manuscript and compute the binary black hole<br> rates using the software released on https://github.com/ssbvr/BBH_merging_rates.<br> The data can be accessed, e.g., with Pandas as</p> <p>```py<br> import pandas as pd<br> df = pd.read_csv('./data_release/source_data/arXiv_2212.10924.csv.gz',<br> compression='gzip')<br> df.head(10)<br> ```</p> <p>Please refer to the following notebook on how use the data to compute the<br> detectable and intrinsic merging population as well as rates, see<br> https://github.com/ssbvr/BBH_merging_rates/blob/main/arXiv_221210924_POSYDON_BBH_Zsun.ipynb</p>
Data of figures in arXiv:2305.03800
<p>Data for all figures in arXiv:2305.03800.</p> <p>See READ_ME.md for detailed description of each file.</p>
ArXiV Archive
Open the record for dataset details and reuse information.
What You Get Is What You See: A Visual Markup Decompiler arXiv preprint arXiv:1609.04938
<p>What You Get Is What You See: A Visual Markup Decompiler</p> <p>arXiv preprint arXiv:1609.04938</p> <p> </p>
Data for arXiv:1702.04117: "The Small World of Osteocytes: Connectomics of the Lacuno-Canalicular Network in Bone"
<p>This dataset contains the raw confocal image stacks of the osteocyte lacuno-canalicular network in woven bone from mouse and fibrolamellar bone from sheep as described in "The Small World of Osteocytes: Connectomics of the Lacuno-Canalicular Network in Bone" (https://arxiv.org/abs/1702.04117). See the methods section of the manuscript for further detail. MATLAB code to reproduce the data plots in the figures can be downloaded from https://github.com/phi-max/OCY_connectomics.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.