Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
354
datasets available to search
ShareScore release 0.9.0
Dataset results
354 results for “bead”
Sandstone Bead, SJ13
Tubular bead, sandstone, unidrectional drill direction, string ware, North Florida, Archaic (6200-5200 ya) Part of the Coontie Island Collection, SJ13_303 Model by Emma Dietrich This model was made using RealityCapture software by Capturing Reality. Interior mesh reconstructed with Geomagic Wrap Source: Objaverse 1.0 / Sketchfab
Jasper Bead, SJ13
Bead, jasper, unidirectional drill direction, North Florida, Archaic (6200-5200 ya) Part of the Coontie Island Collection, SJ13_284 Model by Emma Dietrich This model was made using RealityCapture software by Capturing Reality. Interior mesh reconstruction made using Geomagic Wrap. Source: Objaverse 1.0 / Sketchfab
Sandstone Bead, SJ13
Bead, sandstone, bidirectional drill direction, string ware, North Florida, Archaic (6200-5200 ya) Part of the Coontie Island Collection, SJ13_270 Model by Emma Dietrich This model was made using RealityCapture software by Capturing Reality. Interior mesh reconstruction made using Geomagic Wrap. Source: Objaverse 1.0 / Sketchfab
Olivella Shell Bead (71a785-2)
**Olivella shell bead** Location: Town Creek site (31Mg2-3), Montgomery County, North Carolina. Period: Mississippian (AD 1150-1400). Material: marine shell. Dimensions: length, 52.6 mm; width, 21.4 mm; thickness, 18.0 mm. Notes: Catalog no. 71a785 (specimen 2 of 2). North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Abigail Gancz. Source: Objaverse 1.0 / Sketchfab
Blue glass bead with 'eye' decoration
Culture: Unknown. Material: Wound glass. Diam: 3cm. Accession No: T 051. Current Location: [The Hunt Museum](https://www.huntmuseum.com/), [Limerick](https://www.geonames.org/7778675/limerick-city.html). Truncated biconical [bead](http://vocab.getty.edu/page/aat/300234006) with a vertical perforation. Made of semi opaque, wound, blue glass with an opaque creamy white horizontal trail, around its centre. The bead has 7 'eyes', four above and 3 below the centre line. These are irregularly placed and comprise an irregular circle of opaque white with 2 inner concentric circles of yellow and white with a blue glass central dot. Beads decorated with 'eyes' of layered glass are known from [Egypt](https://www.geonames.org/countries/EG/egypt.html), [Mesopotamia](http://vocab.getty.edu/page/aat/300019828) and [Europe](https://www.geonames.org/6255148/europe.html). [More](https://tinyurl.com/3wd5k8c9). Source: Objaverse 1.0 / Sketchfab
Bead-Making Kit (2342a3403)
**Bead-making Kit (on soil pedestal)** Location: Hairston site (31Sk1), Stokes County, North Carolina. Period: Late Woodland (AD 1500-1600). Material: animal bone. Dimensions (soil pedestal): length, 42.5 cm; width, 22.5 cm. Notes: Catalog no. 2342a3403, North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Steve Davis. Source: Objaverse 1.0 / Sketchfab
Glass bead hollow 2
Hollow verison of [Glass bead - Glaspärla](https://sketchfab.com/3d-models/glass-bead-glasparla-fcd1007ce78e46d3974d6c9e70a288b5) by [Ålands museum in The Aland islands, Finland ](https://sketchfab.com/alandsmuseum) Source: Objaverse 1.0 / Sketchfab
Wmid-906853 - Line weight or bead
A complete lead alloy line weight or bead of probable Post Medieval dating (AD 1600 to AD 1800). The probable line weight is rectangular in shape, with a square cross section. A hole appears to run through the length of the weight, this is mostly infilled with soil at time of recording. One face has been decorated with two raised crosses or Xs. The next face has a raised pellet in the centre. The next face has a horizonital groove. The final face has an unclear design, it appears to have a saltire style cross on one end. But it also exhibits a post depositional scar, probably struck by the plough. For more information, please visit the online database record available at: https://finds.org.uk/database/artefacts/record/id/1064192 Source: Objaverse 1.0 / Sketchfab
Jasper Bead, SJ13
Bead, jasper, Indeterminate drill direction, North Florida, Archaic (6200-5200 ya) Part of the Coontie Island Collection, SJ13_999 Model by Emma Dietrich This model was made using RealityCapture software by Capturing Reality. Interior mesh reconstruction made using Geomagic Wrap. Source: Objaverse 1.0 / Sketchfab
Glass bead hollow 3
Hollow verison of [Glass bead - Glaspärla](https://sketchfab.com/3d-models/glass-bead-glasparla-a7201eb1b4b34cc4bcdb5d257248a0b5) by [Ålands museum in The Aland islands, Finland ](https://sketchfab.com/alandsmuseum) Source: Objaverse 1.0 / Sketchfab
Shell Bead (1940a127)
**Shell bead** Location: Cane Creek site (31Ml3), Mitchell County, North Carolina. Period: late Middle Woodland (AD 700-1100). Material: marine shell. Dimensions: length, 21.3 mm; width, 20.5 mm; thickness, 6.9 mm. Notes: Catalog no. 1940a127, North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Abigail Gancz. Source: Objaverse 1.0 / Sketchfab
Fossilised Bead Rain Drops
Shelfmark EUCM.0107.2013, collected by Sir Charles Lyell. Model created by Connor Wimblett. Please contact is-crc@ed.ac.uk if full size model is required. Source: Objaverse 1.0 / Sketchfab
Shell Disk Bead (1940a121-1)
**Columella shell disk bead** Location: Cane Creek site (31Ml3), Mitchell County, North Carolina. Period: late Middle Woodland (AD 700-1100). Material: marine shell. Dimensions: length, 20.5 mm; width, 20.1 mm; thickness, 4.1 mm. Notes: Catalog no. 1940a121, specimen 1. North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Abigail Gancz. Source: Objaverse 1.0 / Sketchfab
Pylake example: Active calibration bead-bead coupling data
<p>A dataset acquired on a LUMICKS C-Trap used to demonstrate coupling between beads in active calibration.</p> <p>The dataset contains dual trap data with 2.1 micron beads captured in each trap.</p> <p>Files starting with bead1, bead2, bead3 are different bead pairs, while bead4, bead4b and bead4c contain technical replicates for a fourth bead.</p> <p> </p>
Improving the recovery for dissolved eDNA State: A comparative analysis of isopropanol precipitation, magnetic bead extraction, and centrifugal dialysis
<p>Environmental DNA consists of multiple states including but not limited to membrane-bound, adsorbed, and dissolved states. Because of their chemical and physical properties, each of these states may have different degradation and transport potential. Essential to the study of eDNA states is being able to isolate them from an environmental sample. Here we focus on improving the DNA recovery of the dissolved state of eDNA from water. We compared three recovery methods, namely isopropanol precipitation, magnetic bead extraction, and centrifugal dialysis. We evaluated the effectiveness of these methods based on the measured DNA recovery of two different species' DNA of different sizes. DNA recovery was assessed with qPCR. We also checked for the effect of inhibitor removal, and lastly estimated the cost of reagents and consumables (not labor). The DNA recovery varied among extraction methods, with isopropanol precipitation yielding the highest recovery (52.47 ± 19.69%), followed by centrifugal dialysis (12.58 ± 7.15%) and magnetic bead extraction (9.92 ± 3.89%). However, isopropanol precipitation's efficacy was influenced by humic acid concentration in the water matrix. The presence of humic acids significantly affected isopropanol precipitation, with higher humic acid concentrations leading to increased DNA recovery. This suggests that humic acids act as co-precipitators during isopropanol precipitation. We observed that longer DNA fragments (chicken) had lower recovery compared to shorter fragments (salmon) across all extraction methods. Magnetic bead extraction effectively removed inhibitors, while centrifugal dialysis and isopropanol extraction required an additional inhibitor removal step. Isopropanol, magnetic bead extraction, and centrifugal dialysis methods have estimated costs of 7.74, 8.53, and 23.62 USD in 2023 respectively. Overall, isopropanol precipitation was the least expensive and most effective with the highest measured recoveries, but it was dependent on humic acid concentration in the environmental sample.</p>
Investigating the Impact of Process Parameters on Bead Geometry in Laser Wire-Feed Metal Additive Manufacturing
<p>The Excel file is structured to provide a comprehensive overview of the design of experiments (DoE) for the research project titled <em>"Investigating the Impact of Process Parameters on Bead Geometry in Laser Wire-Feed Metal Additive Manufacturing"</em>, conducted under the BALSAM project. This research specifically contributes to deliverables D1.2 and D3.1.</p>
Fluid Interfaces in Mixed-Wet Bead Packs: Insights from 3D X-Ray Imaging
<p>Data for beads curvature: The data on mean curvature on a 200×140×170 voxel dry image before and after the removal of any points within 5 voxels of bead contacts. </p> <p> </p> <p>Data for fluid interfacial curvature between oil and brine: The data on mean and Gaussian curvature distribution on a 930×930×860 voxel wet image. The curvature data is provided for both before and after the removal of points within one voxel of the three-phase contact line.</p>
Design of facilitated dissociation enables control over cytokine signaling duration - SMT raw data - unstimulated - calibration beads - long term tracking - labelled ligand
<p>This dataset contains the raw data for the Single-molecule tracking data of the manuscript: "Design of facilitated dissociation enables control over cytokine signaling duration". Presicely, it contains the calibration beads for all imaging experiments, the long term tracking experiments, the experiments with labelled ligand and the unstimulated probes</p>
Data for Non-Redundant Image Clustering of Early Medieval Glass Beads (DSAA 2023)
<p>Archeological glass beads images with measurements (width, height, weight), pretrained models, resampled data (with less color bias) and clustering results from the paper Non-Redundant Image Clustering of Early Medieval Glass Beads (Accepted at DSAA 2023)</p>
Confocal microscopy imaging of FocalCheck fluorescent beads at various oil indices under ambient temperature
<p>the dataset consisting of 20 fields of images with physical dimensions of 1340x1340x64 pixels. These images were acquired using two different refractive indices: one with oil immersion corrected for a temperature of 23°C and another with oil immersion corrected for a temperature of 37°C. A constant temperature of 24.5°C was maintained throughout the data collection</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.