Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
103
datasets available to search
ShareScore release 0.9.0
Dataset results
103 results for “time pressure”
Data from: Effects of time pressure and time passage on face-matching accuracy
This study investigated the impact of time pressure on matching accuracy with face pairs that combined photographs from student ID cards with high-quality person portraits, and under conditions that provided infrequent identity mismatches. Time pressure was administered via two onscreen displays that observers could use to adjust the amount of time that was allocated to a given trial while completing a block of trials within a required timeframe. Under these conditions, observers matched faces under time pressure that varied from 10 to 2 s (Experiment 1) and 8 to 2 s (Experiment 2). An effect of time pressure was found in each experiment, whereby performance deteriorated under time targets of 4 s. Additionally, a match response bias emerged consistently across blocks, and indicated that separately to time pressure, performance also deteriorated due to time passage. These results therefore indicate that both time passage and pressure exert detrimental effects on face matching.
Impact of hydraulic retention time and pressure on anaerobic digestion of glucose-containing synthetic wastewater
<p>High-pressure anaerobic digestion (HPAD) can directly upgrade biogas (CH4 content to 90%) within the reactor. However, critical operational parameters, including hydraulic retention time (HRT) and pressure remained limited investigation. In this study, an HPAD reactor was operated at five different HRT (from 40 to 13 days), with pressure around 10~13 bar. In HPAD, the pressure was the driving force behind CH4 content. Low HRT (< 20 days) led to volatile fatty acid accumulation, which was earlier than the normal pressure counterpart. HRT had more effect on Archaea than Bacteria, while such a trend was inverted for pressure. Hydrogenotrophic methanogen Methanobacterium prevailed at low HRT (13~20 days). When operating continuous HPAD, attention should be paid to HRT, as low HRT (13 days) impaired the activity of CH4-synthesizing enzyme Methyl-coenzyme M reductase (MCR).</p>
Evaluating Pressure and Time-Dependent Multiphasic Fluid Exchange in Fractured Oil Shale Data
<p>Wolfcamp shale WC21-03</p>
Time series of electrical conductivity, temperature, relative stream stage and total pressure recorded in surface water and streambed sediments of River Erpe and River Ammer, Germany, and the Sturt River, South Australia
<p>Time series of electrical conductivity (mS cm<sup>-1</sup>), temperature (degC), relative stream stage (cm) and total pressure (hPa) recorded in the surface water and in streambed sediments (depth in cm) of River Erpe and River Ammer, Germany, and the Sturt River, South Australia.</p>
Clinical Study to Assess the Efficacy and Pressure Maintenance of MOBIDERM Autofit Versus Bandages in the Management of Breast Cancer Related Lymphedema (BCRL) in Night-time Maintenance Phase.
ClinicalTrials.gov study NCT07355959. IPD Sharing: NO. Countries: 1. Publications: 0.
Effect of Positive End Expiratory Pressure at the Time of Induction in Morbidly Obese Patients
ClinicalTrials.gov study NCT03024658. IPD Sharing: YES. Countries: 0. Publications: 12.
Data from: Timing is everything: fishing‐season placement may represent the most important angling‐induced evolutionary pressure on Atlantic salmon populations
Open the record for dataset details and reuse information.
Data from: Effects of time pressure and time passage on face-matching accuracy
Open the record for dataset details and reuse information.
MERRA-2 tavgU_3d_odt_Np: 3d,diurnal,Time-Averaged,Pressure-Level,Assimilation,Ozone Tendencies 0.625 x 0.5 degree V5.12.4 (M2TUNPODT) at GES DISC
M2TUNPODT (or tavgU_3d_odt_Np) is a 3-dimensional monthly diurnal means data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of ozone tendencies on the 42 pressure levels, such as total ozone analysis tendency, tendency of odd oxygen mixing ratio due to chemistry, tendency of odd oxygen due to moist processes, and tendency of ozone due to dynamics. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. This data collection is the monthly mean of data fields for each 3-hour and time-stamped at the central time starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_odt_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Ozone Tendencies 0.625 x 0.5 degree V5.12.4 (M2T3NPODT) at GES DISC
M2T3NPODT (or tavg3_3d_odt_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of ozone tendencies on the 42 pressure levels, such as total ozone analysis tendency, tendency of odd oxygen mixing ratio due to chemistry, tendency of odd oxygen due to moist processes, and tendency of ozone due to dynamics. The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavgM_3d_qdt_Np: 3d,Monthly mean,Time-Averaged,Pressure-Level,Assimilation,Moist Tendencies 0.625 x 0.5 degree V5.12.4 (M2TMNPQDT) at GES DISC
M2TMNPQDT (or tavgM_3d_qdt_Np) is a 3-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of moist tendencies on the 42 pressure levels, such as tendency of ice (or liquid) water due to dynamics, total ice (or liquid) water tendency due to moist, total specific humidity analysis tendency, and specific humidity tendency due to moist. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. The collection also includes variance of certain parameters.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavgU_3d_tdt_Np: 3d,diurnal,Time-Averaged,Pressure-Level,Assimilation,Temperature Tendencies 0.625 x 0.5 degree V5.12.4 (M2TUNPTDT) at GES DISC
M2TUNPTDT (or tavgU_3d_tdt_Np) is a 3-dimensional monthly diurnal means data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of air temperature tendencies on 42 pressure levels, such as total temperature analysis tendency, and tendency of air temperature due to dynamics (or friction, moisture, radiation, and physics). The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. This data collection is the monthly mean of data fields for each 3-hour and time-stamped at the central time starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_cld_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Cloud Diagnostics 0.625 x 0.5 degree V5.12.4 (M2T3NPCLD) at GES DISC
M2T3NPCLD (or tavg3_3d_cld_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of cloud diagnostics on the 42 pressure levels, such as updraft areal fraction, cloud fraction for radiation , in-cloud cloud liquid (or ice) for radiation, and mass fraction of cloud liquid (or ice) water. The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_qdt_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Moist Tendencies 0.625 x 0.5 degree V5.12.4 (M2T3NPQDT) at GES DISC
M2T3NPQDT (or tavg3_3d_qdt_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of moist tendencies on the 42 pressure levels, such as tendency of ice (or liquid) water due to dynamics, total ice (or liquid) water tendency due to moist, total specific humidity analysis tendency, and specific humidity tendency due to moist. The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_trb_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Turbulence Diagnostics 0.625 x 0.5 degree V5.12.4 (M2T3NPTRB) at GES DISC
M2T3NPTRB (or tavg3_3d_trb_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of turbulence diagnostics on 42 pressure levels, such as total scalar diffusivity, total momentum diffusivity, momentum diffusivity from Louis, and Richardson number from Louis. The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_tdt_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Temperature Tendencies 0.625 x 0.5 degree V5.12.4 (M2T3NPTDT) at GES DISC
M2T3NPTDT (or tavg3_3d_tdt_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of air temperature tendencies on 42 pressure levels, such as total temperature analysis tendency, and tendency of air temperature due to dynamics (or friction, moisture, radiation, and physics). The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavg3_3d_mst_Np: 3d,3-Hourly,Time-Averaged,Pressure-Level,Assimilation,Moist Processes Diagnostics 0.625 x 0.5 degree V5.12.4 (M2T3NPMST) at GES DISC
M2T3NPMST (or tavg3_3d_mst_Np) is a 3-dimensional 3-hourly time averaged data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of moist processes diagnostics on the 42 pressure levels, such as convective rainwater source, 3D flux of ice convective (or nonconvective) precipitation, and 3D flux of liquid convective (or nonconvective) precipitation. The data field is available every three hour starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavgM_3d_tdt_Np: 3d,Monthly mean,Time-Averaged,Pressure-Level,Assimilation,Temperature Tendencies 0.625 x 0.5 degree V5.12.4 (M2TMNPTDT) at GES DISC
M2TMNPTDT (or tavgM_3d_tdt_Np) is a 3-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of air temperature tendencies on 42 pressure levels, such as total temperature analysis tendency, and tendency of air temperature due to dynamics (or friction, moisture, radiation, and physics). The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. The collection also includes variance of certain parameters.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavgU_3d_trb_Np: 3d,diurnal,Time-Averaged,Pressure-Level,Assimilation,Turbulence Diagnostics 0.625 x 0.5 degree V5.12.4 (M2TUNPTRB) at GES DISC
M2TUNPTRB (or tavgU_3d_trb_Np) is a 3-dimensional monthly diurnal means data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of turbulence diagnostics on 42 pressure levels, such as total scalar diffusivity, total momentum diffusivity, momentum diffusivity from Louis, and Richardson number from Louis. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. This data collection is the monthly mean of data fields for each 3-hour and time-stamped at the central time starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
MERRA-2 tavgU_3d_cld_Np: 3d,diurnal,Time-Averaged,Pressure-Level,Assimilation,Cloud Diagnostics 0.625 x 0.5 degree V5.12.4 (M2TUNPCLD) at GES DISC
M2TUNPCLD (or tavgU_3d_cld_Np) is a 3-dimensional monthly diurnal means data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of cloud diagnostics on 42 the pressure levels, such as updraft areal fraction, cloud fraction for radiation, in-cloud cloud liquid (or ice) for radiation, and mass fraction of cloud liquid (or ice) water. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. This data collection is the monthly mean of data fields for each 3-hour and time-stamped at the central time starting from 01:30 UTC, e.g.: 01:30, 04:30, … , 22:30 UTC.MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month. Data Reprocessing: Please check “Records of MERRA-2 Data Reprocessing and Service Changes” linked from the “Documentation” tab on this page. Note that a reprocessed data filename is different from the original file.MERRA-2 Mailing List: Sign up to receive information on reprocessing of data, changing of tools and services, as well as data announcements from GMAO. Contact the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov) to be added to the list.Questions: If you have a question, please read "MERRA-2 File Specification Document", “MERRA-2 Data Access – Quick Start Guide”, and FAQs linked from the ”Documentation” tab on this page. If that does not answer your question, you may post your question to the NASA Earthdata Forum (forum.earthdata.nasa.gov) or email the GES DISC Help Desk (gsfc-dl-help-disc@mail.nasa.gov).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.