Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,028
datasets available to search
ShareScore release 0.9.0
Dataset results
8,028 results for “Influencer”
Dataset of article: Residual capacity of RC beams subjected to impact loading: influence of reinforcement ductility. Part 4: Series I20
<p><strong>Part 4: Series I20</strong></p> <p>Results in this dataset are presented in Johansson et. al. (2024). Any results used from this open access data shall be cited to:<br><br><span>Johansson M., Leppänen J., Andersson M. and Pettersson E. (2024). Residual Capacity of RC Beams Subjected to Impact Loading: Influence of reinforcement ductility. <em>International Journal of Protective Structures</em>. </span><a href="https://doi.org/10.1177/20414196241277221"><span>https://doi.org/10.1177/20414196241277221</span></a></p> <p>The presented data is based on Andersson and Pettersson (2019):</p> <p>Andersson M. and Pettersson E. (2019). Reinforced concrete beams subjected to drop-weight impact: Experimental study of the influence of reinforcement properties on the structural response. Department of Architecture and Civil Engineering. Gothenburg, Sweden: Chalmers University of Technology. Master’s Thesis ACEX30-19-27.</p> <p>---</p> <p>This dataset consists of the following records:</p> <p><strong>Part 1: General information</strong></p> <p>Andersson and Pettersson 2019 - Reinforced Concrete Beams Subjected to Drop-Weight Impact</p> <p><strong>Part 2: Series S</strong></p> <p>Static tests – COM Correlate files</p> <p><strong>Part 3: Series I10</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 4: Series I20</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 5: Result files</strong></p>
Dataset of article: Residual capacity of RC beams subjected to impact loading: influence of reinforcement ductility. Part 3: Series I10
<p><strong>Part 3: Series I10</strong></p> <p>Results in this dataset are presented in Johansson et. al. (2024). Any results used from this open access data shall be cited to:<br><br><span>Johansson M., Leppänen J., Andersson M. and Pettersson E. (2024). Residual Capacity of RC Beams Subjected to Impact Loading: Influence of reinforcement ductility. <em>International Journal of Protective Structures</em>. </span><a href="https://doi.org/10.1177/20414196241277221"><span>https://doi.org/10.1177/20414196241277221</span></a></p> <p>The presented data is based on Andersson and Pettersson (2019):</p> <p>Andersson M. and Pettersson E. (2019). Reinforced concrete beams subjected to drop-weight impact: Experimental study of the influence of reinforcement properties on the structural response. Department of Architecture and Civil Engineering. Gothenburg, Sweden: Chalmers University of Technology. Master’s Thesis ACEX30-19-27.</p> <p>---</p> <p>This dataset consists of the following records:</p> <p><strong>Part 1: General information</strong></p> <p>Andersson and Pettersson 2019 - Reinforced Concrete Beams Subjected to Drop-Weight Impact</p> <p><strong>Part 2: Series S</strong></p> <p>Static tests – COM Correlate files</p> <p><strong>Part 3: Series I10</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 4: Series I20</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 5: Result files</strong></p>
Dataset of article: Residual capacity of RC beams subjected to impact loading: influence of reinforcement ductility. Part 2: Series S
<p><strong>Part 2: Series S</strong></p> <p>Results in this dataset are presented in Johansson et. al. (2024). Any results used from this open access data shall be cited to:<br><br><span>Johansson M., Leppänen J., Andersson M. and Pettersson E. (2024). Residual Capacity of RC Beams Subjected to Impact Loading: Influence of reinforcement ductility. <em>International Journal of Protective Structures</em>. </span><a href="https://doi.org/10.1177/20414196241277221"><span>https://doi.org/10.1177/20414196241277221</span></a></p> <p>The presented data is based on Andersson and Pettersson (2019):</p> <p>Andersson M. and Pettersson E. (2019). Reinforced concrete beams subjected to drop-weight impact: Experimental study of the influence of reinforcement properties on the structural response. Department of Architecture and Civil Engineering. Gothenburg, Sweden: Chalmers University of Technology. Master’s Thesis ACEX30-19-27.</p> <p>---</p> <p>This dataset consists of the following records:</p> <p><strong>Part 1: General information</strong></p> <p>Andersson and Pettersson 2019 - Reinforced Concrete Beams Subjected to Drop-Weight Impact</p> <p><strong>Part 2: Series S</strong></p> <p>Static tests – COM Correlate files</p> <p><strong>Part 3: Series I10</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 4: Series I20</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 5: Result files</strong></p>
Dataset of article: Residual capacity of RC beams subjected to impact loading: influence of reinforcement ductility. Part 1: General information
<p><strong>Part 1: General information</strong></p> <p>Results in this dataset are presented in Johansson et. al. (2024). Any results used from this open access data shall be cited to:</p> <p><span>Johansson M., Leppänen J., Andersson M. and Pettersson E. (2024). Residual Capacity of RC Beams Subjected to Impact Loading: Influence of reinforcement ductility. <em>International Journal of Protective Structures</em>. </span><a href="https://doi.org/10.1177/20414196241277221"><span>https://doi.org/10.1177/20414196241277221</span></a><span> </span></p> <p>The presented data is based on Andersson and Pettersson (2019):</p> <p>Andersson M. and Pettersson E. (2019). Reinforced concrete beams subjected to drop-weight impact: Experimental study of the influence of reinforcement properties on the structural response. Department of Architecture and Civil Engineering. Gothenburg, Sweden: Chalmers University of Technology. Master’s Thesis ACEX30-19-27.</p> <p>---</p> <p>This dataset consists of the following records:</p> <p><strong>Part 1: General information</strong></p> <p>Andersson and Pettersson 2019 - Reinforced Concrete Beams Subjected to Drop-Weight Impact</p> <p><strong>Part 2: Series S</strong></p> <p>Static tests – COM Correlate files</p> <p><strong>Part 3: Series I10</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 4: Series I20</strong></p> <p>Static tests – COM Correlate files</p> <p>Impact tests – High speed images</p> <p>Impact tests – COM Correlate files</p> <p><strong>Part 5: Result files</strong></p>
Figure 4 in Influence des facteurs environnementaux sur la structure des peuplements ichtyologiques de l'île de La Réunion (Sud-Ouest de l'océan Indien)
Figure 4. - ACC des variables environnementales et des espèces caractéristiques. A. sexf: Abudefduf sexfasciatus; A. vaig: Abudefduf vaigiensis; A. bloc: Acanthurus blochii; A. duss: Acanthurus dussumieri; A. gutt: Acanthurus guttatus; A. thom: Acanthurus thompsoni; A. caer: Anampses caeruleopunctatus; A. mele: Anampses meleagrides; A. furc: Aphareus furca; A. holo: Apogon holotaenia; Apo. sp: Apogon sp.; A. vire: Aprion virescens; A. hisp: Arothron hispidus; B. viri: Balistoides viridescens; B. anth: Bodianus anthioides; B. axil: Bodianus axillaris; B. dian: Bodianus diana; B. manc: Bothus mancus; C. nata: Canthigaster natalensis; C. bisp: Centropyge bispinosa; C. dolo: Chaetodon dolosus; C. mela: Chaetodon melannotus; C. line: Cheilodipterus lineatus; C. lepi: Chromis lepidolepis; C. web: Chromis weberi; C. cuvi: Coris cuvieri; C. trun: Ctenochaetus truncatus; E. mida: Ecsenius midas; E. flav: Epinephelus flavocaeruleus; E. macr: Epinephelus macrospilos; E. merr: Epinephelus merra; E. mult: Epinephelus multinotatus; E. brev: Exallias brevis; G. gran: Gymnocranius grandoculis; G. gris: Gymnothorax griseus; H. nebu: Halichoeres nebulosus; H. scap: Halichoeres scapularis; H. fasc.: Hemigymnus fasciatus; K. cine: Kyphosus cinerascens; L. nebu: Lethrinus nebulosus; L. nota: Lutjanus notatus; M. bipa: Macropharyngodon bipartitus; M. nige: Melichthys niger; M. flav: Mulloidichthys flavolineatus; N. thyn: Naso thynnoides; O. taen: Ostorhinchus taeniophorus; P. hepa: Paracanthurus hepatus; P. hept: Parupeneus heptacanthus; P. rube: Parupeneus rubescens; P. schw: Pempheris schwenckii; P. picu: Plectorhinchus picus; P. line: Plotosus lineatus; P. rich: Pomachromis richardsoni; P. evid: Ptereleotris evides; S. grac: Saurida gracilis; S. scab: Scarus scaber; S. crum: Selar crumenophthalmus; S. arge: Siganus argenteus; Sig. sp: Siganus sp.; S. suto: Siganus sutor; S. varie: Synodus variegatus; T. ambl: Thalassoma amblycephalum; T. hard: Thalassoma hardwicke; T. fusc: Torpedo fuscomaculata; V. stri: Valenciennea strigata; X. auro: Xanthichthys auromarginatus. Le coefficient de corrélation (r) entre espèces et variables environnementales est de 0,92 sur l'axe 1 et de 0,93 sur l'axe 2. Le test de Monte-Carlo réalisé avec 1000 permutations sur tous les axes donne des valeurs significatives (P = 0,001). [Biplot CCA of environmental variables and characteristic species. Correspondence with species names, Cf. French label. The species-environment correlation factor value (r) is 0.92 on axis 1 and 0.93 on axis 2. The Monte-Carlo test processed with 1000 permutations for all canonical axes produces significant values (P = 0.001).]
Figure 3 in Influence des facteurs environnementaux sur la structure des peuplements ichtyologiques de l'île de La Réunion (Sud-Ouest de l'océan Indien)
Figure 3. - ACC des variables environnementales et des secteurs échantillonnés, identifiés par leur localisation sur l'île: z Nord-Ouest; O Nord-Est; • Sud-Ouest; Z Sud-Est. La correspondance des noms des secteurs est disponible sur la Fig. 1. Le coefficient de corrélation (r) entre secteurs et variables environnementales est de 0,92 sur l'axe 1 et de 0,93 sur l'axe 2. Le test de Monte-Carlo réalisé avec 1000 permutations sur tous les axes donne des valeurs significatives (P = 0,001). [Biplot CCA of environmental variables and sectors categorized by their localization on the island: z North- West; O North-East; • South-West; Z South-East. The correspondence with sector names is available on Fig. 1. The sector-environment correlation factor value (r) is 0.92 on axis 1 and 0.93 on axis 2. The Monte-Carlo test processed with 1000 permutations for all canonical axes produces significant values (P = 0.001).]
Figure 2 in Influence des facteurs environnementaux sur la structure des peuplements ichtyologiques de l'île de La Réunion (Sud-Ouest de l'océan Indien)
Figure 2. - Distribution géographique des espèces. (1) Circumtropicale; (2) Indopacifique; (3) Indo-Ouest Pacifique et mer Rouge; (4) Sud-Ouest de l'océan Indien. [Geographical distribution of sampled species. (1) Circumtropical; (2) Indo-Pacific; (3) Indo-West Pacific and Red Sea; (4) South-Western Indian Ocean.]
Figure 1 in Influence des facteurs environnementaux sur la structure des peuplements ichtyologiques de l'île de La Réunion (Sud-Ouest de l'océan Indien)
Figure 1 - Localisation des secteurs échantillonnés et géomorphologie côtière de La Réunion. [Location of sampled sectors and coastal geomorphology of Réunion Island.]
Velocity and concentration measurements of passive tracer above gravelly seabeds under the wave influence
<p><strong>General description:</strong><br>This dataset was compiled and generated by Helena Stirnweiß as part of a series of Particle Image Velocimetry (PIV) and Laser-Induced Fluorescence (LIF) experiments conducted at the Institute of Fluid Mechanics at the University of Rostock. All data included herein is original and was acquired under controlled laboratory conditions. </p> <p>The experiments were conducted for 21 individual configurations of 3 different wave scenarios (description can be found in 'overview_wavescenarios.csv') and 7 seabed models (description can be found in 'overview_seabedmodels.csv'). The folders where the data is stored are named accordingly '[name of seabed model]_[name of wave scenario]'.</p> <p>Horizontal (u [m/s]) and vertical (w [m/s]) velocities were measured simultaneously to the concentration (c [l/l]) of a tracer fluid released from the seabed. The collected data was analyzed and phase averages and phase-resolved covariances were derived and are given for the field of view of each configuration as .npy-files in the respective folder. <br>Time-averaged and horizontally averaged profiles were determined for the concentration and all covariances in dependence on the bottom distance. The profiles are stored as .npy-files in the respective Folders. </p> <p>Mass mixing length (l_c) and Eddy diffusivity (D_t) profiles were derived for each configuration from the measured data as described in the corresponding article. The variables are given in dependence on the bottom distance as .npy-files in the respective folder. Slopes of the vertical mass mixing length profiles and Eddy diffusivity profiles from linear regression are given in 'slopes_turbmodels.csv'. </p> <p>TIME-RESOLVED DATA IS NOT PROVIDED IN THIS DATASET DUE TO EXTENSIVE DATA SIZE but will be shared upon request. Please contact the creators.</p> <p> </p> <p><strong>Description of .npy files in .zip-folders:</strong></p> <p>The time-averaged, horizontally averaged profiles (named '[c/RS/TF/TKE]_[optional: names of covariates]_time_averaged_[name of seabed model]_[name of wave scenario].npy') are given in each folder.<br>All time-averaged data is stored in the following format.</p> <p>import numpy as np</p> <p>data = np.load(filename.npy, allow_pickle=True)<br>#data[0] -> z-dimensions in mm<br>##data[0][z]</p> <p>#data[1] -> respective quantity (c, Reynolds stresses (RS), turbulent fluxes (TF), turbulent kinetic energy (TKE))<br>##data[1][z]</p> <p> </p> <p>The phase-averages (named '[u/w/c]_phase_averaged_[name of seabed model]_[name of wave scenario].npy'), phase-resolved covariances of the fluctuations (named '[RS/TF]_[names of the covariates]_[name of seabed model]_[name of wave scenario].npy', note: RS stands for Reynolds stresses, TF stands for turbulent fluxes), and the turbulent kinetic energy (named 'TKE_[name of seabed model]_[name of wave scenario].npy') are given in each folder.<br>All phase-resolved data is stored in the following format.</p> <p>import numpy as np</p> <p>data = np.load(filename.npy, allow_pickle=True)<br>#data[0] -> x-dimensions in mm<br>##data[0][z, x]</p> <p>#data[1] -> z-dimensions in mm<br>##data[1][z, x]</p> <p>#data[2] -> respective quantity (c, u, w, Reynolds stresses (RS), turbulent fluxes (TF), turbulent kinetic energy (TKE))<br>##data[2][phi_idx, z, x]</p> <p>#(phase-averaging is performed with 100 phase bins -> phi_idx ranges from 0 to 99)</p> <p> </p> <p>Mass mixing length (lc) and eddy diffusivity (Dt) profiles were derived as described in the corresponding article and are given in each folder under '[lc/Dt]_prof_[name of seabed model]_[name of wave scenario].npy' in the following format:<br>data = np.load(filename.npy, allow_pickle=True)<br>#data[0] -> z-dimensions in mm<br>##data[0][z]</p> <p>#data[1] -> respective quantity (l_c in mm, D_t in m^2/s)<br>##data[1][z]</p>
Figure 1 in Influence of Mycorrhizae and Irrigation on Growth and Mineral Uptake by Corn (Zea mays L.) Seedlings in a Calcareous Soil
Figure 1. Average of shoot and root biomass (g/plant), leaf width (cm), and chlorophyll SPAD reading of corn seedlings grown in Guam cobbly clay soil, either inoculated (■) or not inoculated (♦) with Glomus aggregatum, and provided one of four volumes of water: W1=7200 mL, W2=3600 mL, W3=1800 mL, and W4=900 mL during a 3-week experiment. Crossbars represent standard deviations of means with four replications.
Coordinated Reply Attacks in Influence Campaigns: Characterization and Detection
<p>We release the datasets to replicate the results of `Coordinated Reply Attacks in Influence Operations:<br>Characterization and Detection'.</p> <p>See https://github.com/osome-iu/io-coordinated-replies for details.</p>
Expression quantitative trait loci influence DNA damage-induced apoptosis in cancer
<p><strong>Exposure expression quantitative trait loci (e2QTL)</strong></p> <p>The analysis of e2QTL allows for the identification of context-specific eQTL effects (Kim-Hellmuth et al. (2017), PMID: 28814792). To evaluate how inter-individual genetic variability influences the regulation of DNA damage-induced apoptosis, we performed e2QTL analysis of CD8+ T cells from 461 healthy European participants stimulated with high doses of 5 different carcinogens. These include Methyl-methanesulfonate (MMS), tert-butyl-hydroperoxide (TBOOH), benzo(a)pyrene-7,8-diol-9,10-epoxide (BPDE), 4-hydroxycyclophosphamide (HC) and UVC radiation.</p> <p><code>eQTL_DNA_damage_induced_apoptosis.csv:</code> eQTL data. FastQTL was used to analyze cis-eQTL within a 1 MB window of a gene’s transcription start site. Filtering and normalization of expression data was performed as described by the Genotype Tissue Expression (GTEx) project (The GTEx Consortium (2015), PMID: 25954001) including 60 PEER factors, top 3 genotype PCs and sex as covariates. Genotypes were filtered by PHWE > 10-6 and MAF > 5 %. Adjusted p-values were generated using 1,000 to 10,000 permutations. Variant IDs (CHR:POS:REF:ALT) are based on GRCh38.</p> <p><code>e2QTL_DNA_damage_induced_apoptosis.csv:</code> e2QTL data. The most significant variant for each analyzed gene was determined based on eQTL data to calculate e2QTL in a z-test that were corrected for multiple testing using Bonferroni correction as described by Kim-Hellmuth et al. (2017). Variant IDs (CHR:POS:REF:ALT) are based on GRCh38.</p> <p> </p>
Humidity and temperature influence on the self-cleaning performance of building materials containing the photocatalysts
<p>Datasets for article Humidity and temperature influence on the self-cleaning performance of building materials containing the photocatalysts</p>
Data from: Personality and social network structure influence cooperative dynamics across canid species
<p>In canids, cooperative behaviour occurs in many scenarios. However, most studies focus on single-species observations, not accounting for variation beyond the species-level. We modelled cooperative behaviour using Eigenvalue centrality as well as boldness combined with biological traits such as kinship, sex, age, mating system and foraging strategy in multiple canid species with Bayesian inference, Tukey HSD and distance correlation.</p>
Lecturer Performance: The Influence of Transformational Leadership Style, Work Environment, Compensation, and Institutional Transformation
<p>This study aims to test and analyze the influence of transformational leadership style, work environment, compensation, and institutional transformation on the performance of lecturers at the Mandala Institute of Technology and Science. This study uses a quantitative approach. Data analysis uses descriptive statistical analysis and inferential statistical analysis that describes a certain characteristic or feature of a phenomenon that occurs and makes conclusions or generalizations about the population based on sample data. The sample used was 48 lecturers at the Mandala Institute of Technology and Science. The results of the study indicate that compensation affects lecturer performance, while transformational leadership style, work environment, and institutional transformation do not affect lecturer performance. The implications of this study indicate that increasing compensation can significantly improve lecturer performance at the Mandala Institute of Technology and Science, so it is important for institutions to focus on fairer and more adequate compensation policies. Conversely, improvements in transformational leadership style, work environment, and institutional transformation need to be adjusted to the specific context and needs of lecturers in order to have a more significant impact on performance.</p>
Dataset for "Influence on micro-geometry and surface characteristics of laser powder bed fusion built 17-4 PH miniature spur gears in laser shock peening"
<p>The dataset represents the experimental data for publication "Influence on micro-geometry and surface characteristics of laser powder bed fusion built 17-4 PH miniature spur gears in laser shock peening".</p>
Data set: Modeling of Electron-Transfer Kinetics in Magnesium Electrolytes: Influence of the Solvent on the Battery Performance
<p>Dataset of the continuum simulations generated and used within the paper "<span>Modeling of Electron-Transfer Kinetics in Magnesium Electrolytes: Influence of the Solvent on the Battery Performance</span>", published in ChemSusChem (<span>2021</span><span>, </span><span>14 (21)</span><span>, 4820-4835, DOI: <span>10.1002/cssc.202101498</span></span>).</p> <p><span>The performance of rechargeable magnesium batteries is strongly dependent on the choice of electrolyte. The desolvation of multivalent cations usually goes along with high energy barriers, which can have a crucial impact on the plating reaction. This can lead to significantly higher overpotentials for magnesium deposition compared to magnesium dissolution. In this work we combine experimental measurements with DFT calculations and continuum modeling to analyze magnesium deposition in various solvents. Jointly, these methods provide a better understanding of the electrode reactions and especially the magnesium deposition mechanism. Thereby, a kinetic model for electrochemical reactions at metal electrodes is developed, which explicitly couples desolvation to electron transfer and, furthermore, qualitatively takes into account effects of the electrochemical double layer. The influence of different solvents on the battery performance is studied for<br>the state-of-the-art magnesium tetrakis(hexafluoroisopropyloxy)borate electrolyte salt. It becomes apparent that not necessarily a whole solvent molecule must be stripped from the</span> <span>solvated magnesium cation before the first reduction step can take place. For magnesium reduction it seems to be sufficient to have one coordination site available, so that the magnesium cation is able to get closer to the electrode surface. Thereby, the initial desolvation of the magnesium cation determines the deposition reaction for mono-, tri- and tetraglyme, whereas the influence of the desolvation on the plating reaction is minor for diglyme and<br>tetrahydrofuran. Overall, we can give a clear recommendation for diglyme to be applied as solvent in magnesium electrolytes</span>.<br><br></p>
Changes in salt marsh detritivore identity influences on ecosystem multifunctionality
<p>Ecosystems world-wide experience changes in species composition in response to natural and anthropogenic changes in environmental conditions. Research to date has greatly improved our understanding of how species affect focal ecosystem functions. However, because measurements of multiple ecosystem functions have not been consistently justified for any given trophic group, it is unclear whether interpretations of research syntheses adequately reflect the contributions of consumers to ecosystems. Using model communities assembled in experimental microcosms, we examined the relationship between four numerically dominant detritivore species and six ecosystem functions that underpin fundamental aspects of carbon and nitrogen cycling above- and below-ground. We tested whether ecosystem responses to changes in detritivore identity depended upon species trait dissimilarity, food web compartment (aboveground, belowground, mixed), or number of responses considered (one to six). We found little influence of detritivore species identity on brown (i.e. soil-based) processes. Only one of four detritivore species uniquely influenced decomposition, and detritivore species did not vary in their influence on soil nitrogen pools (NO<sub>3</sub><sup>-</sup> and NH<sub>4</sub><sup>+</sup>), or root biomass. However, changes in detritivore identity influenced multiple aboveground ecosystem functions. That is, by serving as prey, ecosystem engineers, and occasionally also as herbivores as well as detritivores, these species altered the strength of aboveground predator-herbivore interactions and plant-shoot biomass. Yet, dissimilarity of detritivore functional traits was not associated with dissimilarity of ecosystem functioning. These results serve as an important reminder that consumers influence ecosystem processes via multiple energy channels and that food web interactions set important context for consumer-mediated effects on multiple ecosystem functions. Given that species are being lost, gained, and redistributed at unprecedented rates, we can anticipate that changes in species identity will have additional ecosystem consequences beyond those predicted by species' primary functional role.</p>
Data and code for 'Influence of cross-correlation on the modelled uncertainty in stress–strain behavior of soft clays'
<p>This dataset contains data and code used in the research work for the manuscript "Influence of cross-correlation on the modelled uncertainty in stress–strain behavior of soft clays". The study considered two case studies, Haarajoki clay and Suurpelto clay. Two settlement calculation methods were used: compression index method and Janbu (tangential stiffness) method. In addition, clay database FI-CLAY/14/856 was extended and used to study cross-correlations between compressibility paramaters at different clay sites. Version 2 of FI-CLAY/14/856 is provided, including some other updates and corrections also.</p> <p>The Monte Carlo simulation with Gaussian copula was implemented with Python in Jupyter Notebook environment. In addition to data and code, supplementary figures are also provided. The contents of the dataset-folder are briefly described below:</p> <ul> <li>1_Data_Oedometer_test <ul> <li>Oedometer test data for Haarajoki clay and Suurpelto clay: <ul> <li>Data tables that include the clay specimen identifications, index properties, and oedometer test results (.xlsx)</li> <li>Oedometer raw data files that include all the available stress-strain measurements of both constant-rate-of-strain and incrementally loaded odometer tests (.xlsx)</li> </ul> </li> <li>Extended clay database FI-CLAY/14/856 (version 2) (.xlsx)</li> </ul> </li> <li>2_Code_Jupyter_Notebooks <ul> <li>Python code used to run the Monte Carlo simulations and to create the results figures (.ipynb)</li> <li>Readme-file (.txt)</li> </ul> </li> <li>3_Figures_Online_Supplement <ul> <li>Scatterplots with histograms that show the simulated compressibility parameters in each case (.pdf)</li> </ul> </li> </ul> <p> </p> <p>More information on database FI-CLAY/14/856 can be found from the original article (https://www.tandfonline.com/doi/full/10.1080/17499518.2020.1864410) and 304dB datbase compilation by TC304 (http://140.112.12.21/issmge/tc304.htm).</p> <p> </p>
CCSM4 LR and HR Model Simulations for GRL paper "The Influence of a Resolved Gulf Stream on the Decadal Variability of Southeast US Rainfall"
<p>This archive contains model simulations of precipitation used in the GRL paper "The Influence of a Resolved Gulf Stream on the Decadal Variability of Southeast US Rainfall" (Zhang et al., 2021). These model simulations are standard control simulations based on the Community Climate System Model Version 4.0 (CCSM4) using eddying (HR) and eddy-parameterizing (LR) ocean component models. </p> <p><em><strong>In order to properly acknowledge those who have worked hard to create those data sets we do require that if this data is used in a publication that coauthorship be offered to those involved in the data creation. Please contact the author Dr. Wei Zhang (email: wz19@princeton.edu) for any further questions or potential collaboration. </strong></em></p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.