Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,580
datasets available to search
ShareScore release 0.9.0
Dataset results
1,580 results for “V2”
Sentinel-5P TROPOMI Radiance product band 3 (UVIS detector) L1B 5.5km x 3.5km V2 (S5P_L1B_RA_BD3_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD3_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.
VIIRS/SNPP Dark Target Aerosol L2 6-Min Swath (v2.0)
The Suomi National Polar-orbiting Partnership (SNPP) Visible Infrared Imaging Radiometer Suite (VIIRS) NASA standard Level-2 (L2) dark target (DT) aerosol product provides satellite-derived measurements of Aerosol Optical Thickness (AOT) and their properties over land and ocean, and spectral AOT and their size parameters over oceans every 6 minutes, globally. The VIIRS incarnation of the DT aerosol product is based on the same DT algorithm that was developed and used to derive products from the Terra and Aqua mission’s MODIS instruments. Two separate and distinct DT algorithms exist. One helps retrieve aerosol information over ocean (dark in visible and longer wavelengths), while the second aids retrievals over vegetated/dark-soiled land (dark in the visible).This orbit-level product (Short-name: AERDT_L2_VIIRS_SNPP_NRT) has an at-nadir resolution of 6 km x 6 km, and progressively increases away from nadir given the sensor's scanning geometry and Earth's curvature. Viewed differently, this product's resolution accommodates 8 x 8 native VIIRS moderate-resolution (M-band) pixels that nominally have ~750 m horizontal pixel size. Hence, the Level-2 Dark Target Aerosol Optical Thickness data product incorporates 64 (750 m) pixels over a 6-minute acquisition. Version 2.0 constitutes the latest collection of the L2 Dark Target Aerosol product and contains improvements over its previous collection (v1.1).
Sentinel-5P TROPOMI Radiance product band 7 (SWIR detector) L1B 5.5km x 7km V2 (S5P_L1B_RA_BD7_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD7_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.
Sentinel-5P TROPOMI Near-Real-Time (NRT) Aerosol Index 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__AER_AI_HiR_NRT) at GES DISC
The Sentinel-5P TROPOMI Near Real Time (NRT) Aerosol Index 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__AER_AI_HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__AER_AI_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__AER_AI_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI UV Aerosol Index has been calculated based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where ozone absorption is weak. A residual value is calculated from measured top-of-atmosphere (TOA) reflectance and per-calculated theoretical reflectance for a Rayleigh scattering-only atmosphere given a wavelength pair. TROPOMI UVAI products use the classical wavelength pair of 340/380 nm, and the OMI chosen 354/388 nm pair for the long-term continuous AI record. Figure 1 shows TROPOMI UVAI of orbit# 4060. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~20 MB.
GHRSST Level 2P NOAA ACSPO SST v2.80 from VIIRS on NOAA-21 Satellite
The N21-VIIRS-L2P-ACSPO-v2.80 dataset produced by the NOAA ACSPO system derives the Subskin Sea Surface Temperature (SST) from the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the The Joint Polar Satellite System (JPSS)-2 satellite, renamed as NOAA-21 (N21). N21 was launched on Nov. 10, 2022, the 3rd satellite in the US NOAA latest JPSS series. <br><br>VIIRS L2P SST products are derived at the native sensor resolution (~0.75 km at nadir, ~1.5 km at swath edge) using NOAA's Advanced Clear-Sky Processor for Ocean (ACSPO) system (Jonasson et al. 2022). Data are reported in 10-minute granules in netCDF4 format, compliant with the Group for High Resolution Sea Surface Temperature (GHRSST) Data Specification version 2 (GDS2). The ACSPO N21 VIIRS SST record is available back to 19 Mar 2023. In ACSPO products, SSTs are derived using the Non-Linear SST (NLSST) algorithms (Petrenko et al., 2014). An ACSPO clear-sky mask (ACSM) is provided in each pixel as part of variable l2p_flags, which also includes day/night, land, ice, twilight, and glint flags (Petrenko et al., 2010). Only ACSM confidently clear pixels with quality level QL=5 are recommended. Per GDS2 specifications, two additional Sensor-Specific Error Statistics layers (SSES bias and standard deviation) are reported in each pixel with QL=5. <br><br>The ACSPO VIIRS L2P product is monitored and validated against quality controlled in situ data provided by NOAA in situ SST Quality Monitor system (iQuam) using another NOAA system, SST Quality Monitor (SQUAM). A reduced size (0.5GB/day), equal-angle gridded (0.02-deg resolution), ACSPO N21 VIIRS L3U product is also available (10.5067/GHV21-3U280) (Ignatov et al., 2017).
Sentinel-5P TROPOMI Near-Real-Time (NRT) Total Ozone Column 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__O3_TOT_HiR_NRT) at GES DISC
The Sentinel-5P TROPOMI Near Real Time (NRT) Total Ozone Column 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__O3_TOT_HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__O3_TOT_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__O3_TOT_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. This total column ozone product (S5P_L2__O3_TOT, aka ESA's S5P_L2__O3____) applies the the Direct-fitting algorithm (S5P_TO3_GODFIT), comprising a non-linear least squares inversion by comparing the simulated and measured backscattered radiances. The main products include total vertical column ozone, ozone effective temperature, and the error information in NetCDF-4 format. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~40 MB.
Sentinel-5P TROPOMI Radiance product band 4 (UVIS detector) L1B 5.5km x 3.5km V2 (S5P_L1B_RA_BD4_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD4_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.
Sentinel-5P TROPOMI Near-Real-Time (NRT) Radiance product band 3 (UVIS detector) L1B 5.5km x 3.5km V2 (S5P_L1B_RA_BD3_HiR_NRT) at GES DISC
The Sentinel-5P TROPOMI Near Real Time (NRT) Radiance product band 3 (UVIS detector) L1B 5.5km x 21km V2 (S5P_L1B_RA_BD3_HiR_NRT_NRT) product at GES DISC is the near real time version of the offline S5P_L1B_RA_BD3_HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L1B_RA_BD3_HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~0.650 GB.
Sounder SIPS: Suomi NPP CrIMSS Level 3 Specific Quality Control Gridded Daily CLIMCAPS Full Spectral Resolution V2 at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.gov The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Full Spectral Resolution (FSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2000-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Specific QC accepts profile level from the top of the atmosphere down to the level where the QC determines that it is still good. Below this level, the data is rejected.
Sentinel-5P TROPOMI Radiance product band 5 (NIR detector) L1B 5.5km x 3.5km V2 (S5P_L1B_RA_BD5_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L1B_RA_BD5_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.
Sentinel-5P TROPOMI Irradiance product SWIR module L1B V2 (S5P_L1B_IR_SIR) at GES DISC
The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). TROPOMI Level-1B (L1B) product is generated by the Koninklijk Nederlands Meteoroligisch Instituut (KNMI) TROPOMI L01B processor from Level-0 input data and auxiliary data products with the netCDF-4 enhanced model. It provides users with radiance, irradiance, calibration and engineering products.
Chang SSM/I Derived Monthly Rain Indices 5 x 5 degree V2.3 (RAIN_CHANG) at GES DISC
These data are transitioned to a state of permanent preservation. They are available upon request. More advanced datasets have been developed since. One recommended replacement is the GPCP (doi: 10.5067/DBVUO4KQHXTK) product developed under the MEaSUREs project. Futhermore, the NASA Precipitation Measurement Missions Project released newly processed SSM/I datasets as output from the GPROF (Goddard Profiling Algorithm). (doi: 10.5067/GPM/SSMI/F11/GPROFCLIM/2A/05, 10.5067/GPM/SSMI/F11/GPROFCLIM/3A-MONTH/05, 10.5067/GPM/SSMI/F11/GPROFCLIM/3A-DAY/05) The "RAIN_CHANG" SSM/I Derived Oceanic Monthly Rainfall Indices data set was an early Global Precipitation Climatology Project (GPCP) product. Monthly rainfall indices over the oceans were derived from Special Sensor Microwave Imager (SSM/I) data from the Defense Meteorological Satellite Program (DMSP) satellites F8 and F11, on channels 19 and 22 V. The data set covered the period from July 1987 to December 1995. The monthly rainfall indices are on a 5 degree by 5 degree grid extending from 50 N to 50 S. The Wilheit, Chang and Chiu (1991) method used to derive the indices gives valid values only over ocean areas. Land pixels (including island pixels) and erroneous pixels return a -10 flag. The data are stored on a 72 x 20 grid. Grid point (1,1) contains the index for 45-50 N, 0-5 E, grid point (2,1) contains the index for 45-50 N, 5-10 E, ... and grid point (72,20) contains the index for 45-50 S, 175-180 W. In the data set, each month starts with an ASCII header to identify the year and month. The data is in 10F8.1 format. Each value is the average of AM and PM estimates and corrected for beam filling error. The equation used is: (AM PM)/2.0 * 1.8. Land pixels are set to -10.0. Also there are 33 pixels blocked out due to island contamination (-10.0). If the rain retrieval did not converge, a -10.0 is assigned to the pixel. The objective of this data set was to provide a long term monthly rainfall data set to be used in EOS global change and GEWEX related research.
VIIRS/SNPP Deep Blue Aerosol L2 6-Min Swath 6 km (v2.0)
The Suomi National Polar-orbiting Partnership (SNPP) Visible Infrared Imaging Radiometer Suite (VIIRS) NASA standard Level-2 (L2) deep blue aerosol product provides satellite-derived measurements of Aerosol Optical Thickness (AOT) and their properties over land and ocean, every 6 minutes, globally. The Deep Blue algorithm draws its heritage from previous applications to retrieve AOT from Sea‐viewing Wide Field‐of‐view Sensor (SeaWiFS) and Moderate Resolution Imaging Spectroradiometer (MODIS) measurements over land.This orbit-level product (Short-name: AERDB_L2_VIIRS_SNPP) has an at-nadir resolution of 6 km x 6 km, and progressively increases away from nadir given the sensor’s scanning geometry and Earth’s curvature. Viewed differently, this product’s resolution accommodates 8 x 8 native VIIRS moderate-resolution (M-band) pixels that nominally have ~750 m horizontal pixel size. The L2 Deep Blue AOT data products, at 550 nanometers reference wavelengths, are derived from particular VIIRS bands using two primary AOT retrieval algorithms: Deep Blue algorithm over land, and the Satellite Ocean Aerosol Retrieval (SOAR) algorithm over ocean. Although this product is called Deep Blue based on retrievals for the land algorithm, the data includes over-water retrievals as well.
GPM GROUND VALIDATION UND CITATION NAVIGATION DATA GCPEX V2
The GPM Ground Validation UND Citation Navigation Data GCPEx V2 dataset was collected by the Cessna Citation II Research, which was aircraft, owned, and operated by the University of North Dakota (UND), participated in the GPM Cold-season Precipitation Experiment (GCPEx) by serving as an in situ microphysics sampling platform. GCPEx addressed shortcomings in the GPM snowfall retrieval algorithm by collecting microphysical properties associated remote sensing observations, and coordinated model simulations of precipitating snow. These data sets were collected to aid in the achievement Data User Guide of the overarching goal of GCPEx, which is to characterize the ability of multi-frequency active and passive microwave sensors to detect and estimate falling snow. The GCPEx navigation data set collected wind speed amongst several other parameters. It would also be beneficial to list the other parameters it collected.
Sentinel-5P TROPOMI Near-Real-Time (NRT) Carbon Monoxide CO Column 1-Orbit L2 5.5km x 7km V2 (S5P_L2__CO_____HiR_NRT) at GES DISC
The Sentinel-5P TROPOMI Near Real Time (NRT) Carbon Monoxide CO Column 1-Orbit L2 5.5km x 7km V2 (S5P_L2__CO_____HiR_NRT) at GES DISC is the near real time version of the offline S5P_L2__CO_____HiR data product. These data are typically available within three hours of measurement as required by the Land Atmosphere NRT Capability Earth Observing System (LANCE). These data are intended for a rapid turnaround assessment and are only archived for up to ten days. Users who require a longer data record, or wish to conduct rigorous analysis should use the offline version of this product S5P_L2__CO_____HiR. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. The TROPOMI Carbon Monoxide total column applies a modified SWIR CO retrieval (SICOR) algorithm based on the CO absorption band between 2305 nm and 2385 nm. The S5P SICOR algorithm accounts for cloudy and aerosol loaded atmosphere conditions and is suitable for clear sky observations over land and cloudy observations over both land and oceans. Data are stored in individual files, or granules, that contain one orbit of information. The data are stored in netCDF4 data format and files and complete files are ~20 MB.
GHRSST L3C NOAA/ACSPO Himawari-09 AHI Pacific Ocean Region Sea Surface Temperature v2.90 dataset
The H09-AHI-L3C-ACSPO-v2.90 dataset contains the Subskin Sea Surface Temperature (SST) produced by the NOAA ACSPO system from the Advanced Himawari Imager (AHI; largely identical to GOES-R/ABI) onboard the Himawari-9 (H09) satellite. The H09 is a Japanese weather satellite, the 9th of the Himawari geostationary weather satellite operated by the Japan Meteorological Agency. It was launched on November 2, 2016 into its nominal position at 140.7-deg E, and declared operational on December 13, 2022, replacing the Himawari-8. The AHI is the primary instrument on the Himawari Series for imaging Earth’s weather, oceans, and environment with high temporal and spatial resolutions. <br><br>The H09-AHI-L3C-ACSPO-v2.90 dataset is a gridded version of the ACSPO H09-AHI-L2P-ACSPO-v2.90 dataset (https://podaac.jpl.nasa.gov/dataset/AHI_H09-STAR-L2P-v2.90). The L3C (Level 3 Collated) data is mapped on 0.02-deg lat-lon grid and outputs 24 hourly granules per day, with a daily volume of 0.7 GB/day. Valid SSTs are found over oceans, sea, lakes or rivers, with fill values reported elsewhere. All valid SSTs in L3C are recommended for users, although data over internal waters may not have enough in situ data to be adequately validated. Per GDS2 specifications, two additional Sensor-Specific Error Statistics layers (bias and standard deviation) are reported in each pixel with valid SST. <br><br>The ACSPO H09/AHI L3C product is validated against iQuam in situ data (Xu and Ignatov, 2014) and continuously monitored in the NOAA SQUAM system (Dash et al, 2010). The NRT files are replaced with Delayed Mode (DM) files, with a latency of approximately 2-months. File names remain unchanged, and DM vs NRT can be identified by different time stamps and global attributes inside the files (MERRA for DM instead of GFS for atmospheric profiles, and same day CMC L4 analyses in DM instead of one-day delayed in NRT processing).
GPM GROUND VALIDATION NASA S-BAND DUAL POLARIMETRIC (NPOL) DOPPLER RADAR IFLOODS V2
The GPM Ground Validation NASA S-Band Dual Polarimetric (NPOL) Doppler Radar IFloodS dataset was collected from April 30 to June 16, 2013 near Traer, Iowa as part of the Global Precipitation Measurement (GPM) mission Iowa Flood Studies (IFloodS) campaign. Officially the IFloodS campaign ran from May 1 to June 15 but the NPOL Doppler radar was installed and calibrated prior to the start, allowing for the wider period of record. The NPOL radar, developed by a research team from Wallops Flight Facility, is a fully transportable and self-contained S-band (10 cm), scanning dual-polarimetric, doppler research radar that collected and operated nearly continuously during the IFloodS field campaign. It takes accurate volumetric measurements of precipitation including rainfall rate, particle size distributions, water content and precipitation type. The NPOL Doppler Radar IFloodS data is available in Universal Format (UF) with browse images available in PNG file format.
Sounder SIPS: Suomi NPP CrIMSS Level 2 CLIMCAPS Full Spectral Resolution: Cloud Cleared Radiances V2 at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Full Spectral Resolution (FSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 NSR infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2000-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. Cloud clearing is the process of computing the clear column radiance for a given channel n, and represents what the channel would have observed if the entire scene were cloud free. The entire scene is defined as the ATMS field of regard (FOR) which includes and array of 3x3 CrIS field of views (FOV). The basic assumption of cloud-clearing is that if the observed radiances in each field-of-view are different, the differences in the observed radiances are solely attributed to the differences in the fractional cloudiness in each field of view while everything else (surface properties and atmospheric state) is uniform across the field of regard. A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
GHRSST Level 3U NOAA ACSPO SST v2.80 from VIIRS on NOAA-21 Satellite
The N21-VIIRS-L3U-ACSPO-v2.80 dataset produced by the NOAA ACSPO system derives the Subskin Sea Surface Temperature (SST) from the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Joint Polar Satellite System (JPSS)-2 satellite, renamed as NOAA-21 (N21). N21 was launched on Nov. 10, 2022, the 3rd satellite in the US NOAA latest JPSS series. <br><br>The ACSPO N21 VIIRS L3U (Level 3 Uncollated) product is a gridded version of the ACSPO N21 VIIRS L2P product, also available at PO.DAAC (10.5067/GHV21-2P280). The L3U output files are 10-minute granules in netCDF4 format, compliant with the Group for High Resolution Sea Surface Temperature (GHRSST) Data Specification version 2 (GDS2). The ACSPO N21 VIIRS SST record is available back to 19 Mar 2023. There are 144 granules per 24 hour interval, with a total data volume of 0.6GB/day. Fill values are reported at all invalid pixels, including pixels >5 km inland. For each valid water pixel (defined as ocean, sea, lake or river, and up to 5 km inland), the following layers are reported: SST, a subset of variable l2p_flags (including day/night, land, ice, twilight, and glint flags), wind speed, and the SST minus reference CMC SST (Canadian Met Centre 0.1deg L4 SST, 10.5067/GHCMC-4FM03). Only L2P SSTs with QL=5 were gridded, so all valid SSTs are recommended for the users. Per GDS2 specifications, two additional Sensor-Specific Error Statistics layers (SSES bias and standard deviation) are reported in each pixel with valid SST. <br><br>The ACSPO VIIRS L3U product is monitored and validated against quality controlled in situ data provided by NOAA in situ SST Quality Monitor system (iQuam) using another NOAA system, SST Quality Monitor (SQUAM).
Sentinel-5P TROPOMI SNPP VIIRS cloud product band 3 (UVIS detector) 1-Orbit L2 5.5km x 3.5km V2 (S5P_L2__NP_BD3_HiR) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data before August 6th of 2019, please check S5P_L2__NP_BD3_1 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.