Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

145

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

145 results for “THEMIS”

Learn how ShareScore rates datasets ↗
nasa12/100

THEMIS GBO All Sky Imager at Ekati, NT, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Ekati (64.72 deg GLat, 250.67 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS-D: On Board moments: ESA and SST Electron/Ion moments, density, flux, velocity, pressure and temperature.

THEMIS-D On Board moments. On board data outputs include number density, particle flux, energy flux, and a six component symetric momentum flux tensor. Other moments are calculated from these partial moments on the ground adding total pressure, velocity, plasma temperature (measured as a three dimensional energy vector), and a six component symetric pressure tensor to the list of data products. Number density and total pressure are scalar outputs. Velocity is calculated in DSL, GSE, GSM, and MFA coordinates (coordinate descriptions are listed below in Table 1). Magnetic Field Aligned pressure tensor and temperature are calculated as well. All quantities are calculated for both ions and electrons from a combination of ESA and SST data. Moments data are taken at spin resolution in all ESA survey modes except burst. The spacecraft potential, as measure by the EFI, is used to correct for spacecraft charging by shifting the particle energies for calculation; this eliminates contamination from photo-electrons. Also, weighting factors are used to account for instrument specific energy and angle efficiency variations. Table 1: Coordinate Descriptions. Despun Sun - L-vector (DSL): Z-axis points towards the spin axis, the Y-axis is obtained from the cross product of Z and the Spacecraft-Sun direction as viewed from the probe. The X-axis sits in the Z-axis-Sun plane and completes a right handed system. Geocentric Solar Ecliptic (GSE): Z-axis is normal to the solar ecliptic, the X-axis points from earth towards the Sun, and Y complets a right handed system. Geocentric solar Magnetosphereic (GSM): X-axis points from Earth to the Sun, the Y-axis is orthogonal to the Earth's magnetic dipole and points towards the dusk side, and the X-Z plane contains the dipole axis. Magnetic Field Aligned (MFA): Z-axis points along magnetic field lines, the Y-axis is the orthonormal cross product of the Z-axis and a vector pointing towards the Sun, and the X-axis completes the right handed system.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS-A: On Board Fast Fourier Transform (FFT) power spectra of Electric (EFI) and Magnetic (SCM) field measurements, for particle and wave burst survey modes.

On Board Fast Fourier Transform (FFT) power spectra of Electric (EFI) and Magnetic (SCM) field measurements for particle and wave burst survey modes. Spectra are produced only in Particle Burst and Wave Burst modes; only a preselected four of the signals listed in Table 1 are input at any time. Data fed through the FFT while not in Particle or Wave Burst modes is automatically disgarded. The FFTs (Cooley-Tukey algorithm) are conducted as an integral part of the power spectrum calculation by the Field Programable Gate Arrays (FPGAs). A CORDIC algorithm is used for sine/cosine calculations. The data has raw resolution of 1024 pts for 8,192 sample/sec signals and 2048 pts for 16,384 sample/sec signals (EAC measurements only). Signals at 8,192 samples/sec are handled by 1024-point FFTs, while those at 16,384 samples/sec go through 2048-point FFTs. Past and current signal configurations for specific spacecraft are listed bellow in Table 2. The spectra are arranged into log spaced frequency bins in steps of 16, 32, or 64. Cadence is adjusted to keep packet size constant (i.e. increasing the fequency resolution by a factor of 2 decreases the sampling rate by 1/2). The frequency bins cover a range of 0 Hz to 4 kHz. Table 1: FFT Input Signals. Signal Description SCMX, SCMY, SCMZ: Three axis magnetic fiend from SCM V1 through V6: Probe-spacecraft voltage for all six EFI sensors E12DC, E34DC, E56DC: DC-coupled electric field measured from opposing EFI sensors E12AC, E34AV, E56AC: AC-coupled electric field measured from opposing EFI sensors E12HF: High frequency electric field from EFI Table 2: Spacecraft specific configurations. All probes were initially set to use EDC34, EDC56, SCM2, and SCM3 signals for both particle and wave burst modes. Output was set to 16 frequency bins at 4 Hz. Configuration Changes: 9 June 2008: Particle burst spectra resolution increased from 16 to 64 bins and cadence slowed from 4 Hz to 1 Hz for closer analysis of spectral features. N/A: Particle burst spectra on all probes reconfigured to 64 bins at 1 Hz. 15 Aug 2008: E34DC and E56DC inputs switched to E34AC and E56AC to reduce impact of wake fields on FFT spectral measurements. 15 Oct 2008: Particle burst spectra resolution reduced from 64 to 32 bins and the rate increased from 1 Hz to 2 Hz; a response to noise from plasma wake fields in the 64 bin spectra. Table 3: Instrument-Spacecraft Physical Configuration Instrument Alignment in Spacecraft Geometric coordinates (SPG). See THEMIS website for coordinate system details and mechanical drawings. EFI boom 1: Along positive X-axis EFI boom 2: Along negative X-axis EFI boom 3: Along positive Y-axis EFI boom 4: Along negative Y-axis EFI boom 5: Along positive Z-axis EFI boom 6: Along negative Z-axis SCM *The SCM uses an instrument specific set of axes; an orthogonal system centered instrument with the X-axis 12.1 degrees from the SPG X-axis.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS-B: On Board spin fits (FIT) of Electric (EFI) and Magnetic (FGM) field. On-Board Spin-fit electric and magnetic field data

THEMIS-B: On Board spin fits of Electric (EFI) and Magnetic (FGM) fields. This file contains data EFI and FGM that has been despun on-board to 3 second resolution. It stores meta information like the number of points that contributed to each spin and the standard deviation of those points. For the EFI data it also stores variables with the Z component of the EFI data zeroed and the Z component of the EFI estimated using the E.B=0 equality. The need to use an estimated Z axis for the EFI is due to error in measurements from the EFI axial booms. These data are provided in DSL (despun spacecraft L-Z vector), GSM, and GSE coordinates.

restrictednotspecifiedAug 2025View details →
nasa12/100

Athabasca THEMIS Ground-based All Sky Imager; Full Resolution Images.

THEMIS Ground All Sky Imager at Athabasca (54.71 deg GLat, 246.69 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Snap Lake, NT, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Snap Lake (63.58 deg GLat, 249.13 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS-E (P4) Orbit (Ephemeris)

THEMIS-E Orbital Information provided via the Satellite Situation Center, SSCWeb, System and Services, Space Physics Data Facility, SPDF, GSFC, NASA

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS-C: Probe Electric Field Instrument and Search Coil Magnetometer Instrument, Digital Fields Board - digitally computed Filter Bank spectra and E12 peak and average in HF band (FBK).

The Filter Bank is part of the Digital fields board and provides band-pass filtering for EFI and SCM spectra as well as E12HF peak and average value calculations. The Filter Bank provides band-pass filtering for less computationally and power intensive spectra than the FFT would provide. The process is as follows: Signals are fed to the Filter Bank via a low-pass FIR filter with a cut-off frequency half that of the original signal maximum. The output is passed to the band-pass filters, is differenced from the original signal, then absolute value of the data is taken and averaged. The output from the low-pass filter is also sent to a second FIR filter with 2:1 decimation. This output is then fed back through the system. The process runs through 12 cascades for input at 8,192 samples/s and 13 for input at 16,384 samples/sec (EAC input only), reducing the signal and computing power by a factor 2 at each cascade. At each cascade a set of data is produced at a sampling frequency of 2^n from 2 Hz to the initial sampling frequency (frequency characteristics for each step are shown below in Table 1). The average from the Filter Bank is compressed to 8 bits with a pseudo-logarithmic encoder. The data is stored in sets of six frequency bins at 2.689 kHz, 572 Hz, 144.2 Hz, 36.2 Hz, 9.05 Hz, and 2.26 Hz. The average of the coupled E12HF signal and it's peak value are recorded over 62.5 ms windows (i.e. a 16 Hz sampling rate). Accumulation of values from signal 31.25 ms windows is performed externally. The analog signals fed into the FBK are E12DC and SCM1. Sensor and electronics design provided by UCB (J. W. Bonnell, F. S. Mozer), Digital Fields Board provided by LASP (R. Ergun), Search coil data provided by CETP (A. Roux). Table 1: Frequency Properties. Cascade Frequency content of Input Signal Low-pass Filter Cutoff Frequency Freuency Content of Low-pass Output Signal Filter Bank Frequency Band 0* 0 - 8 kHz 4 kHz 0 - 4 kHz 4 - 8 kHz 1 0 - 4 kHz 2 kHz 0 - 2 kHz 2 - 4 kHz 2 0 - 2 kHz 1 kHz 0 - 1 kHz 1 - 2 kHz 3 0 - 1 kHz 512 Hz 0 - 512 Hz 512 Hz - 1 kHz 4 0 - 512 Hz 256 Hz 0 - 256 Hz 256 - 512 Hz 5 0 - 256 Hz 128 Hz 0 - 128 Hz 128 - 256 Hz 6 0 - 128 Hz 64 Hz 0 - 64 Hz 64 - 128 Hz 7 0 - 64 Hz 32 Hz 0 - 32 Hz 32 - 64 Hz 8 0 - 32 Hz 16 Hz 0 - 16 Hz 16 - 32 Hz 9 0 - 16 Hz 8 Hz 0 - 8 Hz 8 - 16 Hz 10 0 - 8 Hz 4 Hz 0 - 4 Hz 4 - 8 Hz 11 0 - 4 Hz 2 Hz 0 - 2 Hz 2 - 4 Hz 12 0 - 2 Hz 1 Hz 0 - 1 Hz 1 - 2 Hz *Only available for 16,384 Hz sampling.

restrictednotspecifiedAug 2025View details →
nasa12/100

Taloyoak THEMIS Ground-based All Sky Imager; Full Resolution Images.

THEMIS Ground All Sky Imager at Taloyoak (69.54 deg GLat, 266.45 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Fort Yukon, AK. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Fort Yukon (66.56 deg GLat, 214.79 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at White Horse, YT, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at White Horse (61.01 deg GLat, 224.78 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

ODYSSEY THEMIS VIS GEO V2.0

The THEMIS VIS-GEO data set contains the spatially registered, visible images derived from the calibrated radiance (VIS-RDR) products. Each image file is accompanied by a detached PDS label describing the data format, contents, and processing history.

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Goose Bay, NL, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Goose Bay (53.32 deg GLat, 299.54 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

Inuvik THEMIS Ground-based All Sky Imager; Full Resolution Images.

THEMIS Ground All Sky Imager at Inuvik (68.41 deg GLat, 226.23 deg GLong): 256 x 256 pixel full resolution images of auroral oval. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours a sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS-A: On Board spin fits (FIT) of Electric (EFI) and Magnetic (FGM) field. On-Board Spin-fit electric and magnetic field data

THEMIS-A: On Board spin fits of Electric (EFI) and Magnetic (FGM) fields. This file contains data EFI and FGM that has been despun on-board to 3 second resolution. It stores meta information like the number of points that contributed to each spin and the standard deviation of those points. For the EFI data it also stores variables with the Z component of the EFI data zeroed and the Z component of the EFI estimated using the E.B=0 equality. The need to use an estimated Z axis for the EFI is due to error in measurements from the EFI axial booms. These data are provided in DSL (despun spacecraft L-Z vector), GSM, and GSE coordinates.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS-D (P3) Orbit (Ephemeris)

THEMIS-D Orbital Information provided via the Satellite Situation Center, SSCWeb, System and Services, Space Physics Data Facility, SPDF, GSFC, NASA

restrictednotspecifiedApr 2025View details →
nasa12/100

THEMIS-B: On Board Fast Fourier Transform (FFT) power spectra of Electric (EFI) and Magnetic (SCM) field measurements, for particle and wave burst survey modes.

On Board Fast Fourier Transform (FFT) power spectra of Electric (EFI) and Magnetic (SCM) field measurements for particle and wave burst survey modes. Spectra are produced only in Particle Burst and Wave Burst modes; only a preselected four of the signals listed in Table 1 are input at any time. Data fed through the FFT while not in Particle or Wave Burst modes is automatically disgarded. The FFTs (Cooley-Tukey algorithm) are conducted as an integral part of the power spectrum calculation by the Field Programable Gate Arrays (FPGAs). A CORDIC algorithm is used for sine/cosine calculations. The data has raw resolution of 1024 pts for 8,192 sample/sec signals and 2048 pts for 16,384 sample/sec signals (EAC measurements only). Signals at 8,192 samples/sec are handled by 1024-point FFTs, while those at 16,384 samples/sec go through 2048-point FFTs. Past and current signal configurations for specific spacecraft are listed bellow in Table 2. The spectra are arranged into log spaced frequency bins in steps of 16, 32, or 64. Cadence is adjusted to keep packet size constant (i.e. increasing the fequency resolution by a factor of 2 decreases the sampling rate by 1/2). The frequency bins cover a range of 0 Hz to 4 kHz. Table 1: FFT Input Signals. Signal Description SCMX, SCMY, SCMZ: Three axis magnetic fiend from SCM V1 through V6: Probe-spacecraft voltage for all six EFI sensors E12DC, E34DC, E56DC: DC-coupled electric field measured from opposing EFI sensors E12AC, E34AV, E56AC: AC-coupled electric field measured from opposing EFI sensors E12HF: High frequency electric field from EFI Table 2: Spacecraft specific configurations. All probes were initially set to use EDC34, EDC56, SCM2, and SCM3 signals for both particle and wave burst modes. Output was set to 16 frequency bins at 4 Hz. Configuration Changes: 30 June - 3 July 2008: Particle burst spectra on all probes reconfigured to 64 bins at 1 Hz. Table 3: Instrument-Spacecraft Physical Configuration Instrument Alignment in Spacecraft Geometric coordinates (SPG). See THEMIS website for coordinate system details and mechanical drawings. EFI boom 1: Along positive X-axis EFI boom 2: Along negative X-axis EFI boom 3: Along positive Y-axis EFI boom 4: Along negative Y-axis EFI boom 5: Along positive Z-axis EFI boom 6: Along negative Z-axis SCM: *The SCM uses an instrument specific set of axes; an orthogonal system centered instrument with the X-axis 12.1 degrees from the SPG X-axis.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Sanikiluaq, NU, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Sanikiluaq (56.54 deg GLat, 280.77 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Pinawa, MB, Canada. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Pinawa (50.20 deg GLat, 263.96 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →
nasa12/100

THEMIS GBO All Sky Imager at Kiana, AK. ASI Thumbnails Data.

THEMIS Ground All Sky Imager at Kiana (66.97 deg GLat, 199.56 deg GLong): 32 x 32 pixel thumbnails for full ASI images. The ASI stations monitor a 170 degree field of view imaging the auroral oval at kilometer resolution. The ASI is comprised of a fisheye lens and CCD in a stainless steel enclosure topped with a transparent acrylic dome. The CCD has a resolution of 256 x 256 pixels. Exposure control ranges from 5 s to 1 ms although the typical data rate is one image every 3 seconds. Silicone heaters keep the instrument within the nominal temperature range. During daylight hours sun shades deploy to protect the CCD.

restrictednotspecifiedAug 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.