Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
106
datasets available to search
ShareScore release 0.9.0
Dataset results
106 results for “data merge”
SEAC4RS Merge Data Files
SEAC4RS_Merge_Data are pre-generated merge data files collected during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEA4CRS) airborne field study. This product contains merged data products collected from instruments onboard the DC-8 and ER-2 aircrafts. Data collection for this product is complete.Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) airborne field study was conducted in August and September of 2013. The field operation was based in Houston, Texas. The primary SEAC4RS science objectives are: to determine how pollutant emissions are redistributed via deep convection throughout the troposphere; to determine the evolution of gases and aerosols in deep convective outflow and the implications for UT/LS chemistry; to identify the influences and feedbacks of aerosol particles from anthropogenic pollution and biomass burning on meteorology and climate through changes in the atmospheric heat budget (i.e., semi-direct effect) or through microphysical changes in clouds (i.e., indirect effects); and lastly, to serve as a calibration and validation test bed for future satellite instruments and missions.The airborne observational data were collected from three aircraft platforms: the NASA DC-8, ER-2, and SPEC LearJet. Both the NASA DC-8 and ER-2 aircraft were instrumented for comprehensive in-situ and remote sensing measurements of the trace gas, aerosol properties, and cloud properties. In addition, radiative fluxes and meteorological parameters were also recorded. The NASA DC-8 was mostly responsible for tropospheric sampling, while the NASA ER-2 was operating in the lower stratospheric regime. The SPEC LearJet was dedicated to in-situ cloud characterizations. To accomplish the science objectives, the flight plans were designed to investigate the influence of biomass burning and pollution, their temporal evolution, and ultimately, impacts on meteorological processes which can, in turn, feedback on regional air quality. With respect to meteorological feedbacks, the opportunity to examine the impact of polluting aerosols on cloud properties and dynamics was of particular interest.
DISCOVER-AQ Texas Deployment P-3B Aircraft Merged Data Files
DISCOVERAQ_Texas_Merge_Data contains pre-generated merged data files created from measurements obtained onboard the P-3B aircraft during the Texas (Houston) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Texas deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
NAAMES C-130 Aircraft Merge Data Files
NAAMES_Merge_Data is the North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) pre-generated aircraft merge data files created using data collected during the NAAMES campaign. NAAMES was a NASA funded Earth-Venture Suborbital (EVS) mission with 4 deployments occurring from 2015-2018. Data collection is complete.The NASA North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) project was the first NASA Earth Venture – Suborbital mission focused on studying the coupled ocean ecosystem and atmosphere. NAAMES utilizes a combination of ship-based, airborne, autonomous sensor, and remote sensing measurements that directly link ocean ecosystem processes, emissions of ocean-generated aerosols and precursor gases, and subsequent atmospheric evolution and processing. Four deployments coincide with the seasonal cycle of phytoplankton in the North Atlantic Ocean: the Winter Transition (November 5 – December 2, 2015), the Bloom Climax (May 11 – June 5, 2016), the Deceleration Phase (August 30 – September 24, 2017), and the Acceleration Phase (March 20 – April 13, 2018). Ship-based measurements were conducted from the Woods Hole Oceanographic Institution Research Vessel Atlantis in the middle of the North Atlantic Ocean, while airborne measurements were conducted on a NASA Wallops Flight Facility C-130 Hercules that was based at St. John's International Airport, Newfoundland, Canada. Data products in the ASDC archive focus on the NAAMES atmospheric aerosol, cloud, and trace gas data from the ship and aircraft, as well as related satellite and model data subsets. While a few ocean-remote sensing data products (e.g., from the high-spectral resolution lidar) are also included in the ASDC archive, most ocean data products reside in a companion archive at SeaBass.
DISCOVER-AQ Colorado Deployment P-3B Aircraft Merged Data Files
DISCOVERAQ_Colorado_Merge_Data contains pre-generated merged data files created from measurements obtained onboard the P-3B aircraft during the Colorado (Denver) deployment of NASA's DISCOVER-AQ field study. This data product contains data for only the Colorado deployment and data collection is complete.Understanding the factors that contribute to near surface pollution is difficult using only satellite-based observations. The incorporation of surface-level measurements from aircraft and ground-based platforms provides the crucial information necessary to validate and expand upon the use of satellites in understanding near surface pollution. Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality (DISCOVER-AQ) was a four-year campaign conducted in collaboration between NASA Langley Research Center, NASA Goddard Space Flight Center, NASA Ames Research Center, and multiple universities to improve the use of satellites to monitor air quality for public health and environmental benefit. Through targeted airborne and ground-based observations, DISCOVER-AQ enabled more effective use of current and future satellites to diagnose ground level conditions influencing air quality.DISCOVER-AQ employed two NASA aircraft, the P-3B and King Air, with the P-3B completing in-situ spiral profiling of the atmosphere (aerosol properties, meteorological variables, and trace gas species). The King Air conducted both passive and active remote sensing of the atmospheric column extending below the aircraft to the surface. Data from an existing network of surface air quality monitors, AERONET sun photometers, Pandora UV/vis spectrometers and model simulations were also collected. Further, DISCOVER-AQ employed many surface monitoring sites, with measurements being made on the ground, in conjunction with the aircraft. The B200 and P-3B conducted flights in Baltimore-Washington, D.C. in 2011, Houston, TX in 2013, San Joaquin Valley, CA in 2013, and Denver, CO in 2014. These regions were targeted due to being in violation of the National Ambient Air Quality Standards (NAAQS).The first objective of DISCOVER-AQ was to determine and investigate correlations between surface measurements and satellite column observations for the trace gases ozone (O3), nitrogen dioxide (NO2), and formaldehyde (CH2O) to understand how satellite column observations can diagnose surface conditions. DISCOVER-AQ also had the objective of using surface-level measurements to understand how satellites measure diurnal variability and to understand what factors control diurnal variability. Lastly, DISCOVER-AQ aimed to explore horizontal scales of variability, such as regions with steep gradients and urban plumes.
SASS (Subsonics Assessment) Ozone and NOx Experiment (SONEX) Merge Data Files
SONEX_Merge_DC8_Data_1 is all of the project generated merge files for the SONEX suborbital campaign. Types of merges include 1- and 5-minute, aerosol composition-based, H2O2-based, HNO3-based, hydrocarbon-based, NO-based, and PAN-based merges. Data collection for this product is complete.The SASS (Subsonics Assessment) Ozone and NOx Experiment (SONEX) was an international, multi-organizational mission that took place in October-November 1997. NASA was the US sponsor of SONEX that partnered with POLINAT-2 (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) funded by the German DLR (Deutsches Zentrum für Luft- und Raumfahrt) or German Aerospace Agency. NASA flew the DC-8 aircraft out of NASA/Ames Research Center. DLR operated an instrumented Falcon 20 aircraft. The staging locations for NAFC sampling were primarily Bangor, Maine (US), and Shannon, Ireland. Subsonic aircraft emissions impact several aspects of atmospheric composition: nitrogen oxides (NOx), CO, and hydrocarbons from emissions can perturb upper tropospheric/lower stratospheric (UT/LS) ozone; water vapor, soot, and sulfur oxides (SOx) emitted by aircraft may perturb clouds and aerosols, changing UT/LS radiative forcing and global temperature.In SONEX and POLINAT, flights were conducted in the vicinity of the North Atlantic Flight Coordinator (NAFC) to observe the impact of aircraft emissions on NOx and ozone (O3). The DC-8 aircraft payload (Singh et al., 1999) primarily measured in-situ CO, CO2, hydrocarbons/halocarbons, O3, aerosols (Dibb et al., 2000), OH/HO2, water vapor, nitric acid (Talbot et al., 1999), photolysis rates, temperature, pressure, winds, NOx, and NOy.Three sampling approaches were implemented during SONEX. First, special meteorological (Fuelberg et al., 2000) were developed to allow targeted sampling for air parcels affected by aircraft emissions and various meteorological events, e.g., convection, lightning (Jeker et al., 2000), stratospheric intrusions (Cho et al., 2000). Second, because the NAFC had not been extensively sampled in the past, it was important for SONEX to characterize the climatology of trace species like CN (Wang et al., 2000), NOx and NOy (Koike et al., 2000). Third, tracers (Simpson et al., 2000; Thompson et al., 1999) and model sensitivity studies (Meijer et al., 2000) were employed for Air Mass Identification. This sampling strategy answered the following questions: Where and when are air masses found with the greatest aircraft influence? When and where was stratospheric air sampled? SONEX showed a substantial impact of aircraft emissions on UT/LS NOx and CN in the vicinity of fresh aircraft emissions. However, during October-November 1997 over the NAFC, UT/LS NOx was dominated by surface emissions redistributed by convection and augmented by lightning.
ARCTAS DC-8 Aircraft Merge Data
ARCTAS_Merge_DC8_Aircraft_Data is the pre-generated merge files created from a variety of in-situ instrumentation collecting measurements onboard the DC-8 aircraft during the Arctic Research of the Composition of the Troposphere from Aircraft & Satellites sub-orbital campaign. Data collection for this product is complete.The Arctic is a critical region in understanding climate change. The responses of the Arctic to environmental perturbations such as warming, pollution, and emissions from forest fires in boreal Eurasia and North America include key processes such as the melting of ice sheets and permafrost, a decrease in snow albedo, and the deposition of halogen radical chemistry from sea salt aerosols to ice. Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) was a field campaign that explored environmental processes related to the high degree of climate sensitivity in the Arctic. ARCTAS was part of NASA’s contribution to the International Global Atmospheric Chemistry (IGAC) Polar Study using Aircraft, Remote Sensing, Surface Measurements, and Models of Climate, Chemistry, Aerosols, and Transport (POLARCAT) Experiment for the International Polar Year 2007-2008.ARCTAS had four primary objectives. The first was to understand long-range transport of pollution to the Arctic. Pollution brought to the Arctic from northern mid-latitude continents has environmental consequences, such as modifying regional and global climate and affecting the ozone budget. Prior to ARCTAS, these pathways remained largely uncertain. The second objective was to understand the atmospheric composition and climate implications of boreal forest fires; the smoke emissions from which act as an atmospheric perturbation to the Arctic by impacting the radiation budget and cloud processes and contributing to the production of tropospheric ozone. The third objective was to understand aerosol radiative forcing from climate perturbations, as the Arctic is an important place for understanding radiative forcing due to the rapid pace of climate change in the region and its unique radiative environment. The fourth objective of ARCTAS was to understand chemical processes with a focus on ozone, aerosols, mercury, and halogens. Additionally, ARCTAS sought to develop capabilities for incorporating data from aircraft and satellites related to pollution and related environmental perturbations in the Arctic into earth science models, expanding the potential for those models to predict future environmental change.ARCTAS consisted of two, three-week aircraft deployments conducted in April and July 2008. The spring deployment sought to explore arctic haze, stratosphere-troposphere exchange, and sunrise photochemistry. April was chosen for the deployment phase due to historically being the peak in the seasonal accumulation of pollution from northern mid-latitude continents in the Arctic. The summer deployment sought to understand boreal forest fires at their most active seasonal phase in addition to stratosphere-troposphere exchange and summertime photochemistry.During ARCTAS, three NASA aircrafts, the DC-8, P-3B, and BE-200, conducted measurements and were equipped with suites of in-situ and remote sensing instrumentation. Airborne data was used in conjunction with satellite observations from AURA, AQUA, CloudSat, PARASOL, CALIPSO, and MISR.The ASDC houses ARCTAS aircraft data, along with data related to MISR, a satellite instrument aboard the Terra satellite which provides measurements that provide information about the Earth’s environment and climate.
CPEX-CV Merge Data Files
CPEXCV_Merge_DC8_Data are pre-generated aircraft merge data files created utilizing data collected during the Convective Processes Experiment - Cabo Verde (CPEX-CV) onboard the DC-8 aircraft. Data collection for this product is complete. Seeking to better understand atmospheric processes in regions with little data, the Convective Processes Experiment – Cabo Verde (CPEX-CV) campaign conducted by NASA is a continuation of the CPEX – Aerosols & Winds (CPEX-AW) campaign that took place between August to September 2021. The campaign will take place between 1-30 September 2022 and will operate out of Sal Island, Cabo Verde with the primary goal of investigating atmospheric dynamics, marine boundary layer properties, convection, the dust-laden Saharan Air Layer, and their interactions across various spatial scales to improve understanding and predictability of process-level lifecycles in the data-sparse tropical East Atlantic region. CPEX-CV will work towards its goal by addressing four main science objectives. The first goal is to improve understanding of the interaction between large-scale environmental forcings such as the Intertropical Convergence Zone (ITCZ), Saharan Air Layer, African easterly waves, and mid-level African easterly jet, and the lifecycle and properties of convective cloud systems, including tropical cyclone precursors, in the tropical East Atlantic region. Next, observations will be made about how local kinematic and thermodynamic conditions, including the vertical structure and variability of the marine boundary layer, relate to the initiation and lifecycle of convective cloud systems and their processes. Third, CPEX-CV will investigate how dynamical and convective processes affect size dependent Saharan dust vertical structure, long-range Saharan dust transport, and boundary layer exchange pathways. The last objective will be to assess the impact of CPEX-CV observations of atmospheric winds, thermodynamics, clouds, and aerosols on the prediction of tropical Atlantic weather systems and validate and interpret spaceborne remote sensors that provide similar measurements. To achieve these objectives, the NASA DC-8 aircraft will be deployed with remote sensing instruments and dropsondes that will allow for the measurement of tropospheric aerosols, winds, temperature, water vapor, and precipitation. Instruments onboard the aircraft include the Airborne Third Generation Precipitation Radar (APR-3), lidars such as the Doppler Aerosol WiNd Lidar (DAWN), High Altitude Lidar Observatory (HALO), High Altitude Monolithic Microwave Integrated Circuit (MMIC) Sounding Radiometer (HAMSR), Advanced Vertical Atmospheric Profiling System (AVAPS) dropsonde system, Cloud Aerosol and Precipitation Spectrometer (CAPS), and the Airborne In-situ and Radio Occultation (AIRO) instrument. Measurements taken by CPEX-CV will assist in moving science forward from previous CPEX and CPEX-AW missions, the calibration and validation of satellite measurements, and the development of airborne sensors, especially those with potential for satellite deployment.
PEM West A Merge Data
PEM-West-A_Merge_Data is the merge data collected onboard the DC-8 aircraft during the Pacific Exploratory Mission (PEM) West A suborbital campaign. Data from the Differential Absorption of CO, CH4, N2O Measurements (DACOM) instrument, laser induced fluorescence, grab samples, chemiluminescence, and gas chromatography are featured in this collection. Data collection for this product is complete.During 1983-2001, NASA conducted a collection of field campaigns as a part of the Global Tropospheric Experiment (GTE) for developing advanced instrumentation to quantify atmospheric trace gases’ sources, sinks, and distribution. Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns (PEM-West) were conducted over the northwestern Pacific region, considered the only major region in the northern hemisphere that is “relatively” free from direct anthropogenic influences. PEM-West was a part of the East Asian/North Pacific Regional Study (APARE). The overarching objectives of PEM-West were 1) to investigate the atmospheric chemistry of ozone (O3) and its precursors over the northwestern Pacific, including the examination of their natural budgets as well as the impact of anthropogenic sources; and 2) to investigate the atmospheric sulfur cycle over the region with emphasis on the relative importance and influence of continental vs marine sulfur sources. The two phases of PEM-West were conducted during differing seasons due to contrasting tropospheric outflow from Asia. The first phase, PEM-West A, was conducted over the western Pacific region off the eastern coast of Asia from September-October 1991, a season characterized by the predominance of flow from mid-Pacific regions. The second phase, PEM-West B, was conducted from February-March 1994, a period characterized by maximum air mass outflow. To accomplish its objectives, the PEM-West campaign deployed the NASA DC-8 aircraft across the northwestern Pacific to gather latitudinal, longitudinal, and vertical profile sampling, as well as extensive sampling in both the marine boundary layer and free troposphere. The aircraft was equipped with a comprehensive suite of in-situ instrument packages for characterization of photochemical precursors, intermediate products, and airmass tracers, including O3, nitric oxide (NO), peroxyacetyl nitrate (PAN), nitrogen oxides (NOy), nonmethane hydrocarbons (NMHCs), hydrogen peroxide (H2O2), acetic acid (CH3OOH), carbon monoxide (CO), and formaldehyde (CH2O). Collectively, these measurements enabled the analyses of the photochemical production/destruction of O3 and the distribution of precursor species. In addition, the DC-8 was equipped with instruments for collecting sulfur measurements, including dimethyl sulfide (DMS), carbonyl sulfide (COS), sulfur dioxide (SO2), and carbon disulfide (CS2). Instruments that collected aerosol composition and microphysical properties were also aboard the DC-8. Both missions deployed a Differential Absorption Lidar (DIAL) system for measurements of O3 vertical profiles above and below the aircraft. One highlight of the project was that flight nine of PEM-West A flew over Typhoon Mireille while it made landfall on the coast of Japan. This allowed for a flight by the DC-8 to study the role of typhoons in the transport of trace gases. Detailed descriptions related to the motivation, implementation, and instrument payloads are available in the PEM-West A overview paper and the PEM-West B overview paper. A collection of the publications based on PEM-West A and B observation are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-West Phase A and Pacific Exploratory Mission-West, Phase B (PEM-West B).
ORACLES Merge Data Files
ORACLES_Merge_Data are pre-generated aircraft merge data files created utilizing data collected during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign. These measurements were collected from August 19, 2016 – October 27, 2016, August 1, 2017 – September 4, 2017 and September 21, 2018 – October 27, 2018. ORACLES provides multi-year airborne observations over the complete vertical column of key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments on the planet. The P-3 Orion aircraft was utilized as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds and was supplemented by ER-2 remote sensing during the 2016 campaign. Data collection for this product is complete.Southern Africa produces almost one-third of the Earth’s biomass burning aerosol particles. The ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) experiment was a five year investigation with three intensive observation periods (August 19, 2016 – October 27, 2016; August 1, 2017 – September 4, 2017; September 21, 2018 – October 27, 2018) and was designed to study key processes that determine the climate impacts of African biomass burning aerosols. ORACLES provided multi-year airborne observations over the complete vertical column of the key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments. These inter-model differences in aerosol and cloud distributions, as well as their combined climatic effects in the SE Atlantic are partly due to the persistence of aerosols above clouds. The varying separation of cloud and aerosol layers sampled during ORACLES allow for a process-oriented understanding of how variations in radiative heating profiles impact cloud properties, which is expected to improve model simulations for other remote regions experience long-range aerosol transport above clouds. ORACLES utilized two NASA aircraft, the P-3 and ER-2. The P-3 was used as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds in all three campaigns, supplemented by ER-2 remote sensing in 2016. ER-2 observations will be used to enhance satellite-based remote sensing by resolving variability within a particular scene, and by guiding the development of new and improved remote sensing techniques.
FIREX-AQ Merge Data Files
FIREXAQ_Merge_Data are pre-generated merge data files collected during FIREX-AQ. These files contain merged data products collected onboard the DC-8 aircraft. Completed during summer 2019, FIREX-AQ utilized a combination of instrumented airplanes, satellites, and ground-based instrumentation. Detailed fire plume sampling was carried out by the NASA DC-8 aircraft, which had a comprehensive instrument payload capable of measuring over 200 trace gas species, as well as aerosol microphysical, optical, and chemical properties. The DC-8 aircraft completed 23 science flights, including 15 flights from Boise, Idaho and 8 flights from Salina, Kansas. NASA’s ER-2 completed 11 flights, partially in support of the FIREX-AQ effort. The ER-2 payload was made up of 8 satellite analog instruments and provided critical fire information, including fire temperature, fire plume heights, and vegetation/soil albedo information. NOAA provided the NOAA-CHEM Twin Otter and the NOAA-MET Twin Otter aircraft to measure chemical processing in the lofted plumes of Western wildfires. The NOAA-CHEM Twin Otter focused on nighttime plume chemistry, from which data is archived at the NASA Atmospheric Science Data Center (ASDC). The NOAA-MET Twin Otter collected measurements of air movements at fire boundaries with the goal of understanding the local weather impacts of fires and the movement patterns of fires. NOAA-MET Twin Otter data will be archived at the ASDC in the future. Additionally, a ground-based station in McCall, Idaho and several mobile laboratories provided in-situ measurements of aerosol microphysical and optical properties, aerosol chemical compositions, and trace gas species. The Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign was a NOAA/NASA interagency intensive study of North American fires to gain an understanding on the integrated impact of the fire emissions on the tropospheric chemistry and composition and to assess the satellite’s capability for detecting fires and estimating fire emissions. The overarching goal of FIREX-AQ was to provide measurements of trace gas and aerosol emissions for wildfires and prescribed fires in great detail, relate them to fuel and fire conditions at the point of emission, characterize the conditions relating to plume rise, and follow plumes downwind to understand chemical transformation and air quality impacts. Data collection is complete.
INTEX-A Merged DC-8 Aircraft data
Intercontinental Chemical Transport Experiment - North America Phase A (INTEX-A) is an integrated atmospheric field experiment performed over North America. The study seeks to understand the transport and transformation of gases and aerosols on transcontinental/intercontinental scales and their impact on air quality and climate. A particular focus in this study is to quantify and characterize the inflow and outflow of pollution over North America. The main constituents of interest are ozone and precursors, aerosols and precursors, and the long-lived greenhouse gases. INTEX-NA is part of a larger international ITCT (Intercontinental Transport and Chemical Transformation) initiative. INTEX-NA goals are greatly facilitated and enhanced by a number of concurrent and coordinated national and international field campaigns and satellite observations. Synthesis of the ensemble of observation from surface, airborne, and space platforms, with the help of a hierarchy of models is an important goal of INTEX-NA.
PEM Tropics A Merge Data
PEM-Tropics-A_Merge_Data is the merge data collected during the Pacific Exploratory Mission (PEM) Tropics A suborbital campaign. Data collection for this product is complete.From 1983-2001, NASA conducted a collection of field campaigns as part of the Global Tropospheric Experiment (GTE). Among those was PEM, which intended to improve the scientific understanding of human influence on tropospheric chemistry. Part of the PEM field campaigns were focused on the tropical Pacific region (PEM-Tropics) which was recognized as a “very large chemical vessel.” The overarching science objective was to assess the anthropogenic impact on tropospheric oxidizing power. A secondary objective was to investigate the impact of atmospheric sulfur chemistry, including oxidation of marine biogenic emission of dimethyl sulfide (DMS) on aerosol loading and radiative effect, which is of critical importance in the assessment of global climate change. The PEM-Tropics mission was conducted in two phases to contrast the influence of biomass burning in the dry season and the “relatively clean” wet season. The first, PEM-Tropics A, was carried out during the end of the dry season (August-September 1996), and the second, PEM-Topics B, was conducted during the wet season (March-April 1999). To accomplish its objectives, PEM-Tropics enlisted the NASA DC-8 and P-3B aircrafts to carry out longitudinal and latitudinal surveys at various altitudes as well as vertical profile sampling across the Pacific basin. Both aircrafts were equipped with in-situ instruments measuring hydroperoxyl radicals (HOx), ozone (O3), photochemical precursors (including, reactive nitrogen species and non-methane hydrocarbon species), and intermediate products (e.g., hydrogen peroxide (H2O2), formaldehyde (CH2O), and acetic acid (CH3OOH). The P3-B in-situ instrument payload also included a direct measurement of hydroxyl (OH) for both missions, while the OH and hydroperoxyl radical (HO2) measurements were added to DC-8 aircraft for PEM-Tropics B. Taking advantage of its excellent low altitude capability, the P-3B was instrumented with a comprehensive sulfur measurement package and conducted pseudo-Lagragian sampling for evaluating DMS oxidation chemistry, including measurements of DMS, sulfur dioxide (SO2), sulfuric acid (H2SO4), and methylsulfonic acid (MSA) as well as the first airborne measurement of dimethyl sulfoxide (DMSO) during PEM-Tropics B. More importantly, it was the first time that DMS (the source), OH and O3 (primary oxidants), and products (DMSO, MSA, H2SO4, SO2) were measured simultaneously aboard an aircraft in the tropical pacific. These observations, specifically DMSO, presented a substantial challenge to the DMS oxidation kinetics to this day. The DC-8 aircraft was equipped with the Differential Absoprtion Lidar (DIAL) during PEM-Tropics A, and the differential absorption lidars DIAL and LASE during PEM-Tropics B. These lidars provided real-time information for fine tuning the flight tracks to capture sampling opportunities. The lidar data products themselves provide valuable information of vertical profiles of ozone as well as aerosol and water vapor in tropical Pacific Furthermore, both aircrafts were fitted with instruments for aerosol composition and microphysical property measurements. Detailed description related to the motivation, implementation, and instrument payloads are available in the PEM-Tropics A overview paper and the PEM-Tropics B overview paper. Most of the publications based on PEM-Tropics A and B observations are available in the Journal of Geophysical Research special issues: Pacific Exploratory Mission-Tropics A and NASA Global Tropospheric Experiment Pacific Exploratory Mission in the Tropics Phase B: Measurement and Analyses (PEM-Tropics B), while other publications such as Nowak et al. (2001) were published prior to the special issues.
INTEX-B Merged DC-8/C-130 Aircraft data
INTEX-NA is a two phase experiment that aims to understand the transport and transformation of gases and aerosols on transcontinental/intercontinental scales and assess their impact on air quality and climate. The primary constituents of interest are ozone and precursors, aerosols and precursors, and the long-lived greenhouse gases. The first phase (INTEX-A) was completed in the summer of 2004 and the second phase (INTEX-B) is to be performed in the spring of 2006. This document is intended to provide an update on the goals of INTEX-B and define its implementation strategy. The scientific goals envisioned here are based on the joint implementation of INTEX-B, MIRAGE-Mex and DLR/IMPACT studies and their coordination with satellite observations. In collaboration with these partners, the main goals of INTEX-B are to:- Quantify the transpacific transport and evolution of Asian pollution to North America and assess its implications for regional air quality and climate; - Quantify the outflow and evolution of gases and aerosols from the Mexico City Megaplex; - Investigate the transport of Asian and North America pollution to the eastern Atlantic and assess its implications for European air quality; - Validate and refine satellite observations of tropospheric composition; - Map emissions of trace gases and aerosols and relate atmospheric composition to sources and sinks.The INTEX-B field study is to be performed during an approximate 8-week period from March 1 to April 30, 2006.
ARCTAS P-3B Aircraft Merge Data
ARCTAS_Merge_P3B-Aircraft_Data contains pre-generated merge data files for the P-3B aircraft during the Arctic Research of the Composition of the Troposphere from Aircraft & Satellites (ARCTAS) mission. Data collection for this product is complete.The Arctic is a critical region in understanding climate change. The responses of the Arctic to environmental perturbations such as warming, pollution, and emissions from forest fires in boreal Eurasia and North America include key processes such as the melting of ice sheets and permafrost, a decrease in snow albedo, and the deposition of halogen radical chemistry from sea salt aerosols to ice. ARCTAS was a field campaign that explored environmental processes related to the high degree of climate sensitivity in the Arctic. ARCTAS was part of NASA’s contribution to the International Global Atmospheric Chemistry (IGAC) Polar Study using Aircraft, Remote Sensing, Surface Measurements, and Models of Climate, Chemistry, Aerosols, and Transport (POLARCAT) Experiment for the International Polar Year 2007-2008.ARCTAS had four primary objectives. The first was to understand long-range transport of pollution to the Arctic. Pollution brought to the Arctic from northern mid-latitude continents has environmental consequences, such as modifying regional and global climate and affecting the ozone budget. Prior to ARCTAS, these pathways remained largely uncertain. The second objective was to understand the atmospheric composition and climate implications of boreal forest fires; the smoke emissions from which act as an atmospheric perturbation to the Arctic by impacting the radiation budget and cloud processes and contributing to the production of tropospheric ozone. The third objective was to understand aerosol radiative forcing from climate perturbations, as the Arctic is an important place for understanding radiative forcing due to the rapid pace of climate change in the region and its unique radiative environment. The fourth objective of ARCTAS was to understand chemical processes with a focus on ozone, aerosols, mercury, and halogens. Additionally, ARCTAS sought to develop capabilities for incorporating data from aircraft and satellites related to pollution and related environmental perturbations in the Arctic into earth science models, expanding the potential for those models to predict future environmental change.ARCTAS consisted of two, three-week aircraft deployments conducted in April and July 2008. The spring deployment sought to explore arctic haze, stratosphere-troposphere exchange, and sunrise photochemistry. April was chosen for the deployment phase due to historically being the peak in the seasonal accumulation of pollution from northern mid-latitude continents in the Arctic. The summer deployment sought to understand boreal forest fires at their most active seasonal phase in addition to stratosphere-troposphere exchange and summertime photochemistry.During ARCTAS, three NASA aircrafts, the DC-8, P-3B, and BE-200, conducted measurements and were equipped with suites of in-situ and remote sensing instrumentation. Airborne data was used in conjunction with satellite observations from AURA, AQUA, CloudSat, PARASOL, CALIPSO, and MISR.The ASDC houses ARCTAS aircraft data, along with data related to MISR, a satellite instrument aboard the Terra satellite which provides measurements that provide information about the Earth’s environment and climate.
DE 2 Vector Electric Field Instrument, VEFI, Magnetometer, MAG-B, Merged Magnetic and Electric Field Parameters, 62 ms Data
This Dynamics Explorer 2, DE 2, data set is a combination of the Vector Electric Field Instrument, VEFI, and Magnetometer-B, MAGB, high resolution data sets in spacecraft, SC, coordinates submitted to NSSDC. The following orbit-altitude, OA, parameters have been added to the data set:* 1) Model magnetic field, SC coordinates* 2) Satellite altitude* 3) Geographic latitude and longitude* 4) Magnetic local time* 5) Invariant latitudeThe VEFI data set is described in the file VEFIVOLDESC.SFD and the MAGB data set is described in the file MAGBVOLDESC.SFD, these files are portions of the Standard Format Data Unit, SFDU, metadata files submitted with the VEFI and MAGB data to NSSDC and are included in each volume of this data set. This data set consists of daily files from 1981-08-15, day of year 227, to 1983-02-16, day of year 47. Each file contains all the data available for a given day. During the merging of the data sets it was found that although VEFI and MAGB should cover the same time spans, they do not, due perhaps to the fact that the original MAGB high resolution data set was created on the DE Sigma-9 in Sigma-9 format by using the DE telemetry tapes, while the VEFI high resolution data set was created on the DE MicroVAX system using the DE telemetry data base on optical disk. In order to keep the largest amount of data possible, the merged data set includes all the available VEFI and MAGB data, for those times when VEFI data was available but MAGB was not, 6.54% of the time spanned by this data product, a fill value of 9999999. was given to the MAGB data. Likewise, for those times when MAGB data was available but VEFI was not, 6.87% of the time, the fill value was assigned to the VEFI data. Times for which both VEFI and MAGB data were fill values in the original data sets were not included in the merged data set. There were also times when certain OA parameters were fill values in the OA data base and they are therefore also fill values in this merged data set. The model magnetic field had fill values for 8.55% of the data. Statistics were not kept for the other OA parameters. Each daily file contains a record per measurement. The total number of records in each file varies depending on the amount of data available for a given day.The DE 2 spacecraft, which was the low-altitude mission component, complemented the high-altitude mission DE 1 spacecraft and was placed into an orbit with a perigee sufficiently low to permit measurements of neutral composition, temperature, and wind. The apogee was high enough to permit measurements above the interaction regions of suprathermal ions, and also plasma flow measurements at the feet of the magnetospheric field lines. The general form of the spacecraft was a short polygon 137 cm in diameter and 115 cm high. The triaxial antennas were 23 m tip-to-tip. One 6 m boom was provided for remote measurements. The spacecraft weight was 403 kg. Power was supplied by a solar cell array, which charged two 6 ampere-hour nickel-cadmium batteries. The spacecraft was three-axis stabilized with the yaw axis aligned toward the center of the Earth to within 1°. The spin axis was normal to the orbit plane within 1° with a spin rate of one revolution per orbit. A single-axis scan platform was included in order to mount the low-altitude plasma instrument (ID: 81-070B-08). The platform rotated about the spin axis. A pulse code modulation telemetry data system was used that operated in real time or in a tape recorder mode. Data were acquired on a science-problem-oriented basis, with closely coordinated operations of the various instruments, both satellites, and supportive experiments. Measurements were temporarily stored on tape recorders before transmission at an 8:1 playback-to-record ratio. Since commands were also stored in a command memory unit, spacecraft operations were not real time. Additional details can be found in R.A. Hoffman et al., Space Sci. Instrum., 5(4), 349, 1981. DE-2 reentered the atmosphere on February 19, 1983. A triaxial fluxgate magnetometer onboard DE 2, MAG-B, similar to one on board DE 1 (ID: 81-070A-01), was used to obtain the magnetic field data needed to study the magnetosphere-ionosphere-atmosphere coupling.The primary objectives of this investigation were to measure field aligned currents in the auroral oval and over the polar cap at two different altitudes using the two spacecraft, and to correlate these measurements with observations of electric fields, plasma waves, suprathermal particles, thermal particles, and auroral images obtained from investigation (ID: 81-070A-03). The magnetometer had digital compensation of the ambient field in 8000 nT increments. The instrument incorporated its own 12-bit analog-to-digital, A/D, converter, a 4-bit digital compensation register for each axis, and a system control that generated a 48-bit data word consisting of a 16-bit representation of the field measured along each of three magnetometer axes. Track and hold
KORUS-AQ Aircraft Merge Data Files
KORUSAQ_Merge_Data are pre-generated merge data files combining various products collected during the KORUS-AQ field campaign. This collection features pre-generated merge files for the DC-8 aircraft. Data collection for this product is complete.The KORUS-AQ field study was conducted in South Korea during May-June, 2016. The study was jointly sponsored by NASA and Korea’s National Institute of Environmental Research (NIER). The primary objectives were to investigate the factors controlling air quality in Korea (e.g., local emissions, chemical processes, and transboundary transport) and to assess future air quality observing strategies incorporating geostationary satellite observations. To achieve these science objectives, KORUS-AQ adopted a highly coordinated sampling strategy involved surface and airborne measurements including both in-situ and remote sensing instruments.Surface observations provided details on ground-level air quality conditions while airborne sampling provided an assessment of conditions aloft relevant to satellite observations and necessary to understand the role of emissions, chemistry, and dynamics in determining air quality outcomes. The sampling region covers the South Korean peninsula and surrounding waters with a primary focus on the Seoul Metropolitan Area. Airborne sampling was primarily conducted from near surface to about 8 km with extensive profiling to characterize the vertical distribution of pollutants and their precursors. The airborne observational data were collected from three aircraft platforms: the NASA DC-8, NASA B-200, and Hanseo King Air. Surface measurements were conducted from 16 ground sites and 2 ships: R/V Onnuri and R/V Jang Mok.The major data products collected from both the ground and air include in-situ measurements of trace gases (e.g., ozone, reactive nitrogen species, carbon monoxide and dioxide, methane, non-methane and oxygenated hydrocarbon species), aerosols (e.g., microphysical and optical properties and chemical composition), active remote sensing of ozone and aerosols, and passive remote sensing of NO2, CH2O, and O3 column densities. These data products support research focused on examining the impact of photochemistry and transport on ozone and aerosols, evaluating emissions inventories, and assessing the potential use of satellite observations in air quality studies.
ACTIVATE Falcon Aircraft Merge Data Files
ACTIVATE_Merge_Data is the pre-generated merge data files created from data collected onboard the HU-25 Falcon aircraft during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project is a five-year project (January 2019-December 2023) that will provide important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studies the atmosphere over the western North Atlantic and samples its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air will primarily be used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements will also be onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic are planned through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy is implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.
European Social Survey Data Round 1-11 merged
Open the record for dataset details and reuse information.
merged-data-7000
<p>data</p>
Merged Sentinel-3A and Sentinel-3B OLCI Regional Mapped Inland Waters (ILW) Data, version 4
The Inland Waters dataset (ILW) provides data for lakes and other water bodies across the contiguous United States (CONUS) and Alaska. ILW significantly reduces the processing effort required by end users and is a standardized community resource for lake and reservoir algorithm development and performance assessment.The data is provided for 15,450 CONUS waterbodies with a size of at least one 300 m pixel and over 2,300 resolvable lakes with sizes greater than three 300 m pixels. Alaska has 5,874 lakes resolvable lakes. ILW is a times series containing 10 years of MERIS (2002-2012) and OLCI from both Sentinel-3a (2016-present) and Sentinel-3b (2018-present).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.