Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
403
datasets available to search
ShareScore release 0.9.0
Dataset results
403 results for “data physicalization”
Throw trap and Electrofishing Data from Water Conservation Area 3B, Florida, USA, 2019-2022 for the Decompartmentalization Physical Model Project
This dataset includes densities and biomass of fishes and macroinvertebrates collected using throw traps or an airboat-mounted electrofisher in the study region of the Decompartmentalization Physical Model (DPM) located in Water Conservation Area (WCA) 3B. Some sites in this region experienced seasonal increases in water flow due to the operations of the S-152 structure. The sites sampled for this dataset were either located along a gradient of water flow (downstream the S-152) or were in a reference area that had ambient flow conditions. The purpose of this dataset was to quantify community responses of consumers groups to flowing water and how it may interact with local nutrient conditions at the site level. Hydrological, floc nutrient and periphyton volume data used in the analyses are included. This data package includes the R script that was used to run the statistical models for the manuscript titled "Discharge and nutrients interact to determine trophic structure in a wetland: evidence from a landscape-scale manipulation". The data collection for this data package is complete.
Soil chemical and physical property data for Green Lakes Valley, 1986.
Laboratory analyses were performed on soil samples from the Green Lakes Valley in the City of Boulder Watershed in order to characterize the chemical characteristics of the soil resource. The samples were collected during the 1986 excavations that were required during installation of zero-tension soil solution samplers.
Physical activities data
<p>This upload contains anonymized open data for physical activities.</p>
LSD4WSD : An Open Dataset for Wet Snow Detection with SAR Data and Physical Labelling
<p><strong>LSD4WSD V2.0</strong></p><p><strong>L</strong>earning <strong>S</strong>AR <strong>D</strong>ataset for <strong>W</strong>et <strong>S</strong>now <strong>D</strong>etection - Full Analysis Version. </p><p>The aim of this dataset is to provide a basis for automatic learning to detect wet snow. It is based on Sentinel-1 SAR GRD satellite images acquired between August 2020 and August 2021 over the French Alps. The new version of this dataset is no longer simply restricted to a classification task, and provides a set of metadata for each sample.</p><p>Modification and improvements of the version 2.0.0 :</p><ul><li><i>Number of massif:</i> add 7 new massif to cover the all Sentinel-1 images (cf `info.pdf`).</li><li><i>Acquisition:</i> add images of the descending pass in addition to those originally used in the ascending pass.</li><li><i>Sample: </i>reduction in the size of the samples considered to 15 by 15 to facilitate evaluation at the central pixel.</li><li><i>Sample: </i>increased density of extracted windows, with a distance of approximately 500 meters between the centers of the windows.</li><li><i>Sample:</i> removal of the pre-processing involving the use of logarithms.</li><li><i>Sample:</i> removal of the pre-processing involving the normalisation.</li><li><i>Labels:</i> new structure for the labels part: dictionary with keys: `topography`, `metadata` and `physics`.</li><li><i>Labels:</i> `physics`: addition of direct information from the CROCUS model for 3 simulations: Liquid Water Content, snow height and minimum snowpack temperature.</li><li><i>Labels:</i> `topography`: information on the slope, altitude and average orientation of the sample.</li><li><i>Labels:</i> `metadata` : information on the date of the sample, the mountain massif and the run (ascending or descending).</li><li><i>Dataset</i>: removal of the train/test split*</li></ul><p>*We leave it up to the user to use the Group Kfold method to validate the models using the alpine massif information.</p><p>Finally, it consists of 2467516 samples of size 15 by 15 by 9. For each sample, the 9 metadata are provided, using in particular the <a href="https://www.umr-cnrm.fr/spip.php?article265&lang=en">Crocus</a> physical model:</p><ul><li>topography:<ul><li>elevation (meters) (average),</li><li>orientation (degrees) (average),</li><li>slope (degrees) (average),</li></ul></li><li>metadata:<ul><li>name of the alpine massif,</li><li>date of acquisition,</li><li>type of acquisition (ascending/descending),</li></ul></li><li>physics<ul><li>Liquid Water Content (km/m2),</li><li>snow height (m),</li><li>minimum snowpack temperature (Celsius degree).</li></ul></li></ul><p>The 9 channels are in the following order:</p><ul><li>Sentinel-1 polarimetric channels: VV, VH and the combination C: VV/VH in linear,</li><li>Topographical features: altitude, orientation, slope</li><li>Polarimetric ratio with a reference summer image: VV/VVref, VH/VHref, C/Cref**</li></ul><p>** The reference image selected is that of August 9th 2020, as a reference image without snow (cf. <a href="https://ieeexplore.ieee.org/document/842004">Nagler&al</a>)</p><p>An overview of the distribution and a summary of the sample statistics can be found in the file info.pdf.</p><p>The data is stored in .hdf5 format with gzip compression. We provide a python script to read and request the data. The script is dataset_load.py. It is based on the h5py, numpy and pandas libraries. It allows to select a part or the whole dataset using requests on the metadata. The script is documented and can be used as described in the README.md file</p><p>The processing chain is available at the following <a href="https://github.com/Matthieu-Gallet/LSD4WSD-dataset"><strong>Github</strong></a> address.</p><p>The authors would like to acknowledge the support from the National Centre for Space Studies (CNES) in providing computing facilities and access to SAR images via the PEPS platform.</p><p>The authors would like to deeply thank Mathieu Fructus for running the Crocus simulations.</p><p><strong>Erratum :</strong></p><p>In the dataloader file, the name of the "aquisition" column must be added twice, see the correction below.:</p><blockquote><p>dtst_ld = Dataset_loader(path_dataset,shuffle=False,descrp=["date","massif","aquisition","aquisition","elevation","slope","orientation","tmin","hsnow","tel",],) </p></blockquote><p>If you have any comments, questions or suggestions, please contact the authors: </p><ul><li>matthieu.gallet@univ-smb.fr</li><li>fatima.karbou@meteo.fr</li><li>abdourrahmane.atto@univ-smb.fr</li><li>emmanuel.trouve@univ-smb.fr</li></ul>
Data package for paper "DeepGlow: an efficient neural-network emulator of physical afterglow models for gamma-ray bursts and gravitational-wave events
<p>This is a data package accompanying the paper "DeepGlow: an efficient neural-network emulator of physical afterglow models for gamma-ray bursts and gravitational-wave events".</p>
Data from: Label-free timing analysis of SiPM-based modularized detectors with physics-constrained deep learning
<div> <div> <p>Pulse timing is an important topic in nuclear instrumentation, with far-reaching applications from high energy physics to radiation imaging. While high-speed analog-to-digital converters become more and more developed and accessible, their potential uses and merits in nuclear detector signal processing are still uncertain, partially due to associated timing algorithms which are not fully understood and utilized.</p> <p>In the paper "Label-free timing analysis of SiPM-based modularized detectors with physics-constrained deep learning", we propose a novel method based on deep learning for timing analysis of modularized detectors without explicit needs of labelling event data. By taking advantage of the intrinsic time correlations, a label-free loss function with a specially designed regularizer is formed to supervise the training of neural networks towards a meaningful and accurate mapping function. We mathematically demonstrate the existence of the optimal function desired by the method, and give a systematic algorithm for training and calibration of the model. The proposed method is validated on <strong>two experimental datasets</strong> based on silicon photomultipliers (SiPM) as main transducers:</p> <ol> <li>In the toy experiment, we collect data from a pair of SiPM sensors from a common laser source. The neural network model achieves the single-channel time resolution of 8.8 ps and exhibits robustness against concept drift in the dataset. </li> <li>In the electromagnetic calorimeter experiment, we collect data from an eight-channel calorimeter module. Several neural network models (Fully-Connected, Convolutional Neural Network and Long Short Term Memory) are tested to show their conformance to the underlying physical constraint and to judge their performance against traditional methods. </li> </ol> <p>In total, the proposed method works well in either ideal or noisy experimental condition and recovers the time information from waveform samples successfully and precisely. <strong>The dataset in this repository serves as a basis for similar researches on timing performance of SiPM-based nuclear detectors, and on application of neural networks to typical signals of nuclear radiation detectors.</strong></p> </div> </div>
Data for a publication: "A new promising material for biological applications: multi-level physical modification of AgNPs-decorated PEEK"
<p>The data set contains the data that were used within the article "A New Promising Material for Biological Applications: Multilevel Physical Modification of AgNP-Decorated PEEK" published in the journal Nanomaterials.</p> <p><strong>Versions:</strong></p> <p><strong>V1&2</strong>: The dataset contained AFM and UV VIS data.</p> <p><strong>V3</strong>: All the data used in the article are sorted in the file structure, which description is thoroughly described in the READ ME file. Additionally, the preprint DOI was added.</p> <p> </p> <p> </p>
Data from: Evidence for reductions in physical and chemical plant defense traits in island flora
<p>Reduced defense against large herbivores has been suggested to be part of the "island syndrome" in plants. However, empirical evidence for this pattern is mixed. In this paper, we present two studies that compare putative physical and chemical defense traits from plants on the California Channel Islands and nearby mainland based on sampling of both field and common garden plants. In the first study, we focus on five pairs of woody shrubs from three island and three mainland locations and find evidence for increased leaf area, decreased marginal leaf spines, and decreased concentrations of cyanogenic glycosides in island plants. We observed similar increases in leaf area and decreases in defense traits when comparing island and mainland genotypes grown together in botanic gardens, suggesting that trait differences are not solely driven by abiotic differences between island and mainland sites. In the second study, we conducted a common garden experiment with a perennial herb—<em>Stachys bullata </em>(Lamiaceae)—collected from two island and four mainland locations. Compared to their mainland relatives, island genotypes show highly reduced glandular trichomes and a nearly 100-fold reduction in mono- and sesquiterpene compounds from leaf surfaces. Island genotypes also had significantly higher specific leaf area, somewhat lower rates of gas exchange, and greater aboveground biomass than mainland genotypes across two years of study, potentially reflecting a broader shift in growth habit. Together, our results provide evidence for reduced expression of putative defense traits in island plants, though these results may reflect adaptation to both biotic (i.e., the historical absence of large herbivores) and climatic conditions on islands.</p>
Apathy, motivation, and physical activity behavior: Material, data and R code
<p>This new release includes updates to the code and additional material following the peer review process conducted by Communications in Kinesiology.</p>
Processed data and models in support of manuscript "Deciphering the state of the lower crust and upper mantle with multi-physics inversion"
<p>Data and model files in original format used in the manuscript "Deciphering the state of the lower crust and upper mantle with multi-physics inversion". These files are accompanied by a set of python scripts to reproduce several of the figures in the Manuscript. Please refer to the Manuscript and the included files for further information on data origin and how to use the scripts. A link will be added upon acceptance.</p>
Data: Physical constraints on thermoregulation and flight drive morphological evolution in bats
<p>Body size and shape fundamentally determine organismal energy requirements by modulating heat and mass exchange with the environment and the costs of locomotion, thermoregulation, and maintenance. Ecologists have long used the physical linkage between morphology and energy balance to explain why the body size and shape of many organisms vary across climatic gradients, e.g., why larger endotherms are more common in colder regions. However, few modeling exercises have aimed at investigating this link from first principles. Body size evolution in bats contrasts with the patterns observed in other endotherms, probably because physical constraints on flight limit morphological adaptations. Here, we develop a biophysical model based on heat transfer and aerodynamic principles to investigate energy constraints on morphological evolution in bats. Our biophysical model predicts that the energy costs of thermoregulation and flight, respectively, impose upper and lower limits on the relationship of wing surface area to body mass (S-MR), giving rise to an optimal S-MR at which both energy costs are minimized. A comparative analysis of 278 species of bats supports the model’s prediction that S-MR evolves toward an optimal shape and that the strength of selection is higher among species experiencing greater energy demands for thermoregulation in cold climates. Our study suggests that energy costs modulate the mode of morphological evolution in bats—hence shedding light on a long-standing debate over bats’ conformity to ecogeographical patterns observed in other mammals—and offers a procedure for investigating complex macroecological patterns from first principles.</p>
A physically interpretable data-driven surrogate model for wake steering
<p>PALM input files for the simulations performed in the study "A physically interpretable data-driven surrogate model for wake steering" by Sengers et al. (2022). </p> <p>The PALM code is available at <a href="https://palm.muk.uni-hannover.de/">https://palm.muk.uni-hannover.de</a><br> Additional information to the input files is given in the README file</p> <p>Cite this as:<br> B.A.M. Sengers (2022). Dataset: A physically interpretable data-driven surrogate model for wake steering. https://doi.org/10.5281/zenodo.6821164</p>
Data and morphometric results from a physical experiment simulating washover deposition
<p>This portfolio includes two sets of data, used and explained in Lazarus, Williams & Goldstein (preprint: <a href="https://doi.org/10.31223/X5JH1X">https://doi.org/10.31223/X5JH1X</a>):</p> <ol> <li>washover morphometry measured from a physical experiment to simulate washover deposition, conducted at the Total Environment Simulator (TES) at the University of Hull ('TES_washover_morphometry.csv');</li> <li>the terrestrial laser-scan data in which those morphometric characteristics of washover were measured ('Run01.zip' – 'Run22.zip'), with a table of experimental conditions for each trial (run).</li> </ol> <p> </p> <p><strong>Washover morphometry dataset</strong></p> <p><em><strong>TES_washover_morphometry.csv</strong></em> – Washover morphometry from the 22 experimental trials in the TES at Hull. Dataset includes: deposit ID, throat width (m), deposit width (m), intrusion length (m), deposit area (m<sup>2</sup>), deposit volume (m<sup>3</sup>), deposit perimeter (m), built fraction, forcing mode ("inundation" or "wave-driven"), and a dataset label ("TES").</p> <p> </p> <p><strong>Table of experimental conditions</strong></p> <p><em><strong>TES_parameters_trial_log_full_v2.pdf</strong></em> – Table of experimental conditions for each trial (run).</p> <p> </p> <p><strong>Data folders</strong></p> <p>These folders contain terrestrial laser-scan data from washover experiments at the Total Environment Simulator (TES) at the University of Hull. These files were used to identify and measure the individual washover deposits in each experimental trial.</p> <p>Each folder (Run01–Run22) contains data (in 'e57' file format) for a specific trial, and includes the following:</p> <p><em><strong>RunX_DOD.e57</strong></em> – This is a point cloud of the difference between the Pre_Processed and Post_Processed files. This is produced by subtracting the 'post' values from the 'pre' values.</p> <p><em><strong>RunX_Post_Processed.e57</strong></em> – This is a point cloud of the topography at the end of the experimental run, created from the raw data file by trimming out extraneous points.</p> <p><em><strong>RunX_Post_Raw.e57</strong></em> – This is a point cloud of the topography at the end of the experimental run, created in FARO Scene to merge two individual point clouds (covering the entire interior of the TES) into a non-proprietary file format.</p> <p><em><strong>RunX_Pre_Processed.e57</strong></em> – This is a point cloud of the topography prior to the experimental run, created from the raw data file by trimming out extraneous points.</p> <p><em><strong>RunX_Pre_Raw.e57</strong></em> – This is a point cloud of the topography prior to the experimental run, created in FARO Scene to merge two individual point clouds (covering the entire interior of the TES) into a non-proprietary file format.</p>
Quantifying the Sensitivity and Unclonability of Optical Physical Unclonable Functions (DATA and Python codes)
<p>The data contain experimental and numerical challenge response pairs (CRPs) collected by experimental setup and using Puffraction homebuilt code. In the data set is available all CRPs referred to the paper entitled "Quantifying the Sensitivity and Unclonability of Optical Physical Unclonable Functions" by Giuseppe Emanuele Lio, Sara Nocentini, Lorenzo Pattelli, Eleonora Cara, Diederik Sybolt Wiersma, Ulrich R"uhrmair, and Francesco Riboli. </p> <p> </p> <p>The <strong><em>puffractio</em></strong> python code used to generate and process the numerical data is available at the following link <a href="https://github.com/lpattelli/puffractio.git">https://github.com/lpattelli/puffractio.git</a></p> <p> </p> <p>Please cite the following paper: </p> <p>Quantifying the Sensitivity and Unclonability of Optical Physical Unclonable Functions</p> <p><a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Lio%2C+Giuseppe+Emanuele">Giuseppe Emanuele Lio</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Nocentini%2C+Sara">Sara Nocentini</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Pattelli%2C+Lorenzo">Lorenzo Pattelli</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Cara%2C+Eleonora">Eleonora Cara</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Wiersma%2C+Diederik+Sybolt">Diederik Sybolt Wiersma</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=R%C3%BChrmair%2C+Ulrich">Ulrich Rührmair</a>, <a href="https://onlinelibrary.wiley.com/action/doSearch?ContribAuthorRaw=Riboli%2C+Francesco">Francesco Riboli</a></p> <p><a href="https://onlinelibrary.wiley.com/doi/full/10.1002/adpr.202200225">https://onlinelibrary.wiley.com/doi/full/10.1002/adpr.202200225</a></p>
Text-fig. 10. Langtonia bisulcata REID et CHANDLER. a, b, e–g: Holotype, V. 22984, from micro-CT data. a: Dorsiventral view surface rendering. b: Dorsiventral view translucent volume rendering showing outline of locule cast. c: Equatorial transverse fracture showing paired dorsal infolds and locules with shape of a ε in cross section, reflected light, V. 22993. d: Digital transverse section from micro-CT data, of fruit with two well developed ε-shaped locules, V. 22985. e–g: Successive digital transverse sections with one well developed ε-shaped locule and infolds of the abortive locule visible in (g) (arrows). h–j: Physical transverse thin sections of specimen from middle Eocene Clarno Formation, Oregon, USA with well-preserved mesocarp including longitudinal canals in (j) (arrows), USNM 424875; Scale bars 0.5 cm in (a, b), 2.5 mm in (c–g), 5 mm in (h), 2 mm in (i), 1 mm in (j); (a, b) share same scale bar; (c, d) share same scale bar; (e, f, g) share same scale bar. in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 10. Langtonia bisulcata REID et CHANDLER. a, b, e–g: Holotype, V. 22984, from micro-CT data. a: Dorsiventral view surface rendering. b: Dorsiventral view translucent volume rendering showing outline of locule cast. c: Equatorial transverse fracture showing paired dorsal infolds and locules with shape of a ε in cross section, reflected light, V. 22993. d: Digital transverse section from micro-CT data, of fruit with two well developed ε-shaped locules, V. 22985. e–g: Successive digital transverse sections with one well developed ε-shaped locule and infolds of the abortive locule visible in (g) (arrows). h–j: Physical transverse thin sections of specimen from middle Eocene Clarno Formation, Oregon, USA with well-preserved mesocarp including longitudinal canals in (j) (arrows), USNM 424875; Scale bars 0.5 cm in (a, b), 2.5 mm in (c–g), 5 mm in (h), 2 mm in (i), 1 mm in (j); (a, b) share same scale bar; (c, d) share same scale bar; (e, f, g) share same scale bar.
Text-fig. 8. Lanfrancia subglobosa E.REID et M.CHANDLER. a–c, e–g: Holotype V. 23014. a: reflected light. b, c: Surface renderings from micro-CT data. a, b: Lateral views with dorsal surface of locule facing forward and locule casts protruding in upper part. c: Apical view. d: Fruit showing two locule casts the dorsal surfaces of which face to the left and the right, V. 30417(1). e–g: Successive digital transverse sections showing four u to v to c-shaped locules from micro-CT data. h: Physical transverse section of specimen in (d). i–k: Physical transverse section, V. 30419 from Herne Bay, blue lines in K indicating limits of fibre layer lining the locule. l: Detail from (h), showing sclerenchyma composing the septa and central axis. m: Transverse section, enlargement from (i), showing anatomy of tissues adjacent to the dorsal infold. Blue lines indicate limits of the fibre layer lining the locule. n: Part of (m) recut, tangential section transecting the dorsal infold (central), both limbs of the locule cast, and peripheral parts of the pericarp on either side. o: Detail from (n), showing anatomy of the infold. Scale bars 5 mm in (a–h) (a–g share the same bar), 3 mm in (i), 1 mm in (j–m), 0.5 mm in (n), 0.2 mm in (o). in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 8. Lanfrancia subglobosa E.REID et M.CHANDLER. a–c, e–g: Holotype V. 23014. a: reflected light. b, c: Surface renderings from micro-CT data. a, b: Lateral views with dorsal surface of locule facing forward and locule casts protruding in upper part. c: Apical view. d: Fruit showing two locule casts the dorsal surfaces of which face to the left and the right, V. 30417(1). e–g: Successive digital transverse sections showing four u to v to c-shaped locules from micro-CT data. h: Physical transverse section of specimen in (d). i–k: Physical transverse section, V. 30419 from Herne Bay, blue lines in K indicating limits of fibre layer lining the locule. l: Detail from (h), showing sclerenchyma composing the septa and central axis. m: Transverse section, enlargement from (i), showing anatomy of tissues adjacent to the dorsal infold. Blue lines indicate limits of the fibre layer lining the locule. n: Part of (m) recut, tangential section transecting the dorsal infold (central), both limbs of the locule cast, and peripheral parts of the pericarp on either side. o: Detail from (n), showing anatomy of the infold. Scale bars 5 mm in (a–h) (a–g share the same bar), 3 mm in (i), 1 mm in (j–m), 0.5 mm in (n), 0.2 mm in (o).
Text-fig. 6. Exbeckettia mastixioides (E.REID et M.CHANDLER) comb. nov. from the London Clay. a–f: Holotype, V. 23002, bilocular fruit. a–d: Surface renderings from micro-CT data. a: Apical view. b: Basal view. c: Lateral view with dorsal surface of locule facing forward. d: lateral view with interlocular septum facing forward. e, f: Digital sections from micro-CT data. e: transverse equatorial showing U-shaped locules and distinct dark endocarp (arrows). f: Median longitudinal intercepting both locules. g: lateral view of bilocular fruit with interlocular septum facing forward. V. 23013(3). h: Apical view of bilocular fruit with two exposed locule casts, V. 23013(1). i–l: Fruits in physical transverse section showing U-shaped locules and distinct locule lining. i: Bilocular fruit shown in (g). j: Bilocular fruit, V. 23007. k: Fruit with one locule larger than the other, V. 23006. l: Tetralocular fruit, V. 22993. Scale bar 5 mm in (a–l), bar in (a) applies also to (b–d), bar in (e) applies also to (f), bar in (j) applies to (i–l). in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 6. Exbeckettia mastixioides (E.REID et M.CHANDLER) comb. nov. from the London Clay. a–f: Holotype, V. 23002, bilocular fruit. a–d: Surface renderings from micro-CT data. a: Apical view. b: Basal view. c: Lateral view with dorsal surface of locule facing forward. d: lateral view with interlocular septum facing forward. e, f: Digital sections from micro-CT data. e: transverse equatorial showing U-shaped locules and distinct dark endocarp (arrows). f: Median longitudinal intercepting both locules. g: lateral view of bilocular fruit with interlocular septum facing forward. V. 23013(3). h: Apical view of bilocular fruit with two exposed locule casts, V. 23013(1). i–l: Fruits in physical transverse section showing U-shaped locules and distinct locule lining. i: Bilocular fruit shown in (g). j: Bilocular fruit, V. 23007. k: Fruit with one locule larger than the other, V. 23006. l: Tetralocular fruit, V. 22993. Scale bar 5 mm in (a–l), bar in (a) applies also to (b–d), bar in (e) applies also to (f), bar in (j) applies to (i–l).
Text-fig. 4. Mastixia cf. oregonensis (R.A.SCOTT) TIFFNEY et HAGGARD from the London Clay, originally included within the concept of M. cantiensis. a–c: V. 22960(1). a: Transverse fracture, showing c-shaped locule, dorsal infold, and sculptured endocarp, reflected light. b: Transverse digital section from micro-CT scan data. c: Surface view of ribbed endocarp extracted from micro-CT data. d: Transverse fracture, reflected light, V. 22955 (originally illustrated in pl. 25, fig. 4 of Reid and Chandler 1933). e, f: Transverse physical section, V. 22963(2) showing U-shaped locule and longitudinal dorsal infold. g–i reflected light. g: Detail from left of (d). h, i: Detail from right of (f). Scale bars 5 mm in (a–f), 1 mm in (g–i). in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 4. Mastixia cf. oregonensis (R.A.SCOTT) TIFFNEY et HAGGARD from the London Clay, originally included within the concept of M. cantiensis. a–c: V. 22960(1). a: Transverse fracture, showing c-shaped locule, dorsal infold, and sculptured endocarp, reflected light. b: Transverse digital section from micro-CT scan data. c: Surface view of ribbed endocarp extracted from micro-CT data. d: Transverse fracture, reflected light, V. 22955 (originally illustrated in pl. 25, fig. 4 of Reid and Chandler 1933). e, f: Transverse physical section, V. 22963(2) showing U-shaped locule and longitudinal dorsal infold. g–i reflected light. g: Detail from left of (d). h, i: Detail from right of (f). Scale bars 5 mm in (a–f), 1 mm in (g–i).
Text-fig. 2. Tectocarya spp. a–n: Tectocarya grandis (E.REID et M.CHANDLER) comb. n. Holotype V.22968. a: Lateral view of broken endocarp, reflected light. b–d: Longitudinal views, surface renderings from micro-CT data. e: Translucent volume renderings. f: Apical view, surface rendering. g: View of transversely broken surface showing curved locule, reflected light. h–n: Successive digital transverse sections. Note septum in the dorsal infold (arrows). o, p: Tectocarya rhenana KIRCHH., Miocene of Germany, dorsal view and transverse section [Holotype of Mastixoidea tectocaryoides KIRCHH., Alfred Mine near Konzendorf, photo by Dieter Mai] (Synonym of T. rhenana MAI, 1993). q: T. rhenana transverse section. from Mine Alfred, Düren, Germany, coll. Claire A. Brown 1952, USNM 355632. r, s: Tectocarya sp. from late Eocene of Post, Oregon, USA, physical transverse section, reflected light. UF279-50014. [Surface views of same specimen shown in Manchester and McIntosh 2007: figs 62, 63]. Scale bars 1 cm in (a–r), 0.5 cm in (s). in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 2. Tectocarya spp. a–n: Tectocarya grandis (E.REID et M.CHANDLER) comb. n. Holotype V.22968. a: Lateral view of broken endocarp, reflected light. b–d: Longitudinal views, surface renderings from micro-CT data. e: Translucent volume renderings. f: Apical view, surface rendering. g: View of transversely broken surface showing curved locule, reflected light. h–n: Successive digital transverse sections. Note septum in the dorsal infold (arrows). o, p: Tectocarya rhenana KIRCHH., Miocene of Germany, dorsal view and transverse section [Holotype of Mastixoidea tectocaryoides KIRCHH., Alfred Mine near Konzendorf, photo by Dieter Mai] (Synonym of T. rhenana MAI, 1993). q: T. rhenana transverse section. from Mine Alfred, Düren, Germany, coll. Claire A. Brown 1952, USNM 355632. r, s: Tectocarya sp. from late Eocene of Post, Oregon, USA, physical transverse section, reflected light. UF279-50014. [Surface views of same specimen shown in Manchester and McIntosh 2007: figs 62, 63]. Scale bars 1 cm in (a–r), 0.5 cm in (s).
Text-fig. 3. Mastixia parva E.REID et M.CHANDLER. a–g: Holotype, V. 22972. a: Ventral view (original illustration from pl. 25, fig. 13 of Reid and Chandler 1933), reflected light. b–g: from micro-CT data. b: Dorsal view of specimen in (a) now suffering from encrustation due to pyrite decay; isosurface rendering. c: Translucent volume rendering, dorsal view showing two limbs of the locule and longitudinal groove. d–g: Digital transverse sections at various positions showing c-shaped locule, longitudinal dorsal infold, endocarp wall, and degradational cracks. h, i: V. 22983(1). h: Dorsal view showing longitudinal infold. i: Physical transverse section showing c-shaped locule and longitudinal dorsal infold. Scale bars 5 mm in (a–h), applies also to (b–g), 2 mm in (i). in Mastixioid Fruits (Cornales) From The Early Eocene London Clay Flora: Morphology, Anatomy And Nomenclatural Revision
Text-fig. 3. Mastixia parva E.REID et M.CHANDLER. a–g: Holotype, V. 22972. a: Ventral view (original illustration from pl. 25, fig. 13 of Reid and Chandler 1933), reflected light. b–g: from micro-CT data. b: Dorsal view of specimen in (a) now suffering from encrustation due to pyrite decay; isosurface rendering. c: Translucent volume rendering, dorsal view showing two limbs of the locule and longitudinal groove. d–g: Digital transverse sections at various positions showing c-shaped locule, longitudinal dorsal infold, endocarp wall, and degradational cracks. h, i: V. 22983(1). h: Dorsal view showing longitudinal infold. i: Physical transverse section showing c-shaped locule and longitudinal dorsal infold. Scale bars 5 mm in (a–h), applies also to (b–g), 2 mm in (i).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.