Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
342
datasets available to search
ShareScore release 0.9.0
Dataset results
342 results for “fabric”
Gammertingen mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Source: Objaverse 1.0 / Sketchfab
Clements Fabric Marked Rimsherd with Punctations
This fragment of pottery was once part of the rim of a cooking jar. It is tempered with crushed quartz grit and sand. The exterior surfaces of fabric-marked pottery are impressed with a simple wicker fabric-wrapped paddle consisting of twisted cordage weft interwoven over rigid ward elements. Interior surfaces are mostly smoothed, though the fabric impressions can extend to the interior rim surface. On this particular sherd, an unusual decorative pattern of small punctations was added to the interior surface. Clements series ceramics, first described at the Gaston site (31Hx7) in Halifax County, NC, are similar to Yadkin Fabric Impressed pottery commonly found in the southern Piedmont and both generally date to the Middle Woodland period (ca. A.D. 100-500). This artifact was found at a multi-component site (31WA2199) in eastern Wake County, NC. It measures 3.5 cm tall, 4.0 cm wide, and 0.8 cm thick. This model was constructed by David Cranford with 57 photos using Agisoft Metashape software. Credit: NCDCR/OSA Source: Objaverse 1.0 / Sketchfab
Piquía mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Source: Objaverse 1.0 / Sketchfab
Xanten mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. The authors of the reconstructions are Aleksei Moskvin (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/AlekseiMoskvin Mariia Moskvina (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/MariiaMoskvina and Martijn A. Wijnhoven (VU University Amsterdam) https://vu-nl.academia.edu/MartijnAWijnhoven Source: Objaverse 1.0 / Sketchfab
Fluitenberg mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Source: Objaverse 1.0 / Sketchfab
Gammertingen mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric from Gammertingen. Location: Landesmuseum Württemberg https://www.landesmuseum-stuttgart.de/ https://sketchfab.com/lmwstuttgart To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. The authors of the reconstructions are Aleksei Moskvin (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/AlekseiMoskvin Mariia Moskvina (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/MariiaMoskvina and Martijn A. Wijnhoven (VU University Amsterdam) https://vu-nl.academia.edu/MartijnAWijnhoven Original source: https://skfb.ly/oq88U Source: Objaverse 1.0 / Sketchfab
Kunzing mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Source: Objaverse 1.0 / Sketchfab
Induced pluripotent stem cell-derived cardiomyocyte in vitro models: tissue fabrication protocols, assessment methods, and quantitative maturation metrics for benchmarking progress
<p>The advent of human induced pluripotent stem cells (hiPSCs) and techniques to differentiate cardiomyocytes from them has opened a viable path to creating <em>in vitro</em> models of normal and diseased hearts, accelerating more predictive drug screening and therapeutic strategies for cardiac pathologies. Currently, hiPSC-derived cardiomyocytes (hiPSC-CMs) are more similar to fetal than adult cardiomyocytes, leading many in the field to explore approaches to enhance cell and tissue maturation. There are over 2,000 studies utilizing hiPSC-CMs in models composed of various combinations of cell and extracellular matrix components, using a plethora of differentiation protocols, culture formats, and methods for quantifying cardiomyocyte function. To assess the current state of this rapidly growing area, we systematically analyzed 300 studies using hiPSC-CM models for their selection of hiPSC lines, hiPSC-CM differentiation protocols, types of <em>in vitro </em>models, maturation techniques, and metrics used to assess cardiomyocyte functionality and maturity. Here, we provide the data compiled from our analysis of these papers so others in the field can utilize it to inform their research.</p> <p>Based on this analysis, we highlight the diversity of, and current trends in, <em>in vitro</em> model designs and highlight the most common and promising practices for functional assessments. We further analyzed outputs spanning structural maturity, contractile function, electrophysiology, and gene expression and note field-wide improvements over time. Finally, we observe that a persistent lack of coordination amongst investigators is limiting the field's ability to benchmark and advance hiPSC-CM function against previous studies. We discuss opportunities to collectively pursue the common goal of hiPSC-CM model development, maturation, and assessment that we believe are critical to drive the entire community forward in engineering mature cardiac tissue.</p>
3D representation of meso-voids location and morphology within the fibrous pore space of three carbon fabrics
<p>Segmented meso-voids from a tomography scan of preforms impregnated under capillary dominated conditions, combined to 3D scans of the initial prefrom dry state.</p>
Research data for "Fabrication uncertainty guided design optimization of a photonic crystal cavity by using Gaussian processes"
<h1>Data publication for the paper "Fabrication uncertainty guided design optimization of a photonic crystal cavity by using Gaussian processes"</h1> <div>Contains scripts for performing fabrication uncertainty guided design optimization, example scripts, research data (raw data), cleanup), additional information on models, convergence plots, and field exports.</div> <h2>Funding</h2> <div> <div> <div>We acknowledge funding by the German Federal Ministry of Education and Research (BMBF project siMLopt number 05M20ZAA and BMBF Forschungscampus MODAL number 05M20ZBM) as well as funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy -- The Berlin Mathematics Research Center MATH+ (EXC-2046/1, project ID: 390685689). This project (20FUN05 SEQUME) has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme. This project is co-financed by the European Regional Development Fund (EFRD, application no. 10184206, QD-Sense).</div> </div> </div> <p> </p> <p> </p> <p> </p> <p> </p>
OAM sorted spectrum of a chiral pattern fabricated on a synthetic hologram
<p>here are the collected data of the spectra obtained from an OAM sorter used to study the beam generated from a spiral pattern. Further details on how we used this chiral patterns to confirms the versatility of the OAM spectrum in studying chiral patterns can be found at https://arxiv.org/abs/2110.03391</p>
Acoustic Fabrics dataset
<p>This dataset contains the data collected for the acoustic fabric project that are featured in the figures.</p>
Data of " Micromechanical characterization of the material response in a PA12-SLS fabricated lattice structure and its correlation with bulk behavior"
<pre>Data related to the publication (we would be grateful if you could cite the paper in the case in which you are using the data) title = "Micromechanical characterization of the material response in a PA12-SLS fabricated lattice structure and its correlation with bulk behavior", journal = "Polymer Testing", pages = " ", year = "2022", issn = "####", doi = "<a href="https://doi.org/10.1016/j.polymertesting.2022.107556">https://doi.org/10.1016/j.polymertesting.2022.107556</a>", author = "L. Cobian, M. Rueda-Ruiz, J.P. Fernandez-Blazquez, V. Martinez, F. Galvez, F. Karayagiz, T. Lück, J. Segurado, M.A. Monclus"</pre> <p>This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 862015</p>
Supplementary data for 'Ferrofluid impregnation efficiency and its spatial variability in natural and synthetic porous media: Implications for magnetic pore fabric studies'
<p>Supplementary data for the manuscript 'Ferrofluid impregnation efficiency and its spatial variability in natural and synthetic porous media: Implications for magnetic pore fabric studies'</p>
X-ray computed tomography aided engineering approach for non-crimp fabric reinforced composites [Data set]
<p>The finite element models behind the publication</p> <p>Auenhammer, R.M., Jeppesen, N., Mikkelsen, L.P., Dahl, V.A., Blinzler, B.J., Asp, L.E. Robust numerical analysis of fibrous composites from X-ray computed tomography image data enabling low resolutions, <em>Composites Science and Technology, </em><strong>224</strong>, 109458, <a href="https://doi.org/10.1016/j.compscitech.2022.109458">https://doi.org/10.1016/j.compscitech.2022.109458</a>, 2022. </p> <p>The x-ray scan data which the model is based on can be found in the following publication:</p> <p>Jeppesen, N., V.A. Dahl, A.N. Christensen, A.B. Dahl, L.P. Mikkelsen, Characterization of the fiber orientations in non-crimp glass fiber reinforced composites using structure tensor. IOP Conf. Ser.: Mater. Sci. Eng. 942, 012037, <a href="https://doi.org/10.1088/1757-899X/942/1/012037">https://doi.org/10.1088/1757-899X/942/1/012037</a> 2020</p> <p>and data-set</p> <p>Jeppesen N, Dahl V A, Christensen A N, Dahl A B and Mikkelsen L P 2020 Characterization of the fiber orientations in non-crimp glass fiber reinforced composites using structure tensor [data set] Zenodo. <a href="http://dx.doi.org/10.5281/zenodo.3877522">http://dx.doi.org/10.5281/zenodo.3877522.</a></p> <p> </p>
Data for manuscript sumitted to Open Research Europe, entitled "Low-resistivity, high-resolution W-C electrical contacts fabricated by direct-write focused electron beam induced deposition"
<p>These are the data obtained experimentally and used to draw the figures in the article submitted to Open Research Europe</p>
Supporting information for 'Towards better understanding of the ferrofluid impregnation process and potential artefacts – a prerequisite for reliable interpretation of magnetic pore fabrics'
<p>These tables contain data for the manuscript 'Towards better understanding of the ferrofluid impregnation process and potential artefacts – a prerequisite for reliable interpretation of magnetic pore fabrics'</p>
Experimental data linked to publication "Process optimization and study of the co-sintering behaviour of Cu-Ni multi-material 3D structures fabricated by spark plasma sintering (SPS)"
<p>Those are all the experimental data used to produce the plots in the article</p>
Piquía mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Source: Objaverse 1.0 / Sketchfab
Colington Fabric Impresssed Jar (2236a1)
**White Oak Fabric Impressed jar** Location: Garbacon Creek site (31Cr86), Carteret County, North Carolina. Period: Late Woodland, Colington phase (AD 800-1600). Material: ceramic. Dimensions: height, 13.8 cm; diameter, 15.0 cm. Notes: Catalog no. 2236a1. North Carolina Archaeological Collection, Research Laboratories of Archaeology, University of North Carolina at Chapel Hill. Model by Chris LaMack. Source: Objaverse 1.0 / Sketchfab
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.