Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
92
datasets available to search
ShareScore release 0.9.0
Dataset results
92 results for “real-time systems”
Application of Intelligent Care Systems in Radiation Therapy: Enhancing Patient Safety and Reducing Anxiety Through System Optimization and Real-Time Blood Data Monitoring
ClinicalTrials.gov study NCT06833801. IPD Sharing: NO. Countries: 1. Publications: 0.
ClariCore System Used in Transrectal Ultrasound Guided Prostate Biopsy for Real-Time Tissue Evaluation
ClinicalTrials.gov study NCT03504761. IPD Sharing: NO. Countries: 1. Publications: 0.
Design and Application of Airborne Visual Real-time Evaluation System for Air Medical Rescue
ClinicalTrials.gov study NCT03958682. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Assessment of the Effectiveness of a Prototype Diagnostic System of Bacterial Respiratory Infections Based on Real-time Sequencing
ClinicalTrials.gov study NCT07303400. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Design and Evaluation of an In-Vehicle Real-Time Drunk Driving Detection System
ClinicalTrials.gov study NCT05796609. IPD Sharing: NO. Countries: 1. Publications: 0.
Freezing of Gait Correction and Fall Prevention: Developing a Real-time Somatosensory Stimulation System
ClinicalTrials.gov study NCT01772186. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Remote Real-Time Guidance System in Home Care of Patients With PICC or PORT
ClinicalTrials.gov study NCT05106244. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Real-time Artificial Intelligence System for Detecting Multiple Ocular Fundus Lesions by Ultra-widefield Fundus Imaging
ClinicalTrials.gov study NCT04859634. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Data from: EDAPHOLOG monitoring system: automatic, real-time detection of soil microarthropods
Open the record for dataset details and reuse information.
Global Navigation Satellite System (GNSS) IGS Real-Time Combination Solution Summary of Real-Time Analysis Center (AC) Submissions from NASA CDDIS
This derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. The solution summary files consist of reports on the combination analysis and the comparison with the IGS rapid solution product. This combination summary is a daily file available approximately one to three days after the end of the previous UTC day.
Global Navigation Satellite System (GNSS) IGS Summary of Orbit and Clock Comparisons of Analysis Center (AC) and Combination Real-Time Solutions with IGS Rapid Solutions from NASA CDDIS
This derived product set consists of a summary comparing the International GNSS Service (IGS) Real-Time Service (RTS) orbit and clock products from all analysis center and combination streams with the IGS rapid products. Global Navigation Satellite System (GNSS) provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. The product streams are combination solutions generated by processing individual Real Time solutions from participating IGS Real-time Analysis Centers. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. The solution summary files consist of orbit and clock comparisons of all the AC and combination streams against IGS rapid solution. These products have been provided in support of the IGS RTS (previously Real-Time Pilot Project) since February 2009, prior to the availability of real-time product streams. This summary of the combination product is a daily report available approximately one to three days after the end of the previous UTC day.
Global Navigation Satellite System (GNSS) IGS Real-Time Clock Combination of Real-Time Analysis Center (AC) Submissions Product from NASA CDDIS
This derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 30-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
Ground-Based Global Navigation Satellite System (GNSS)-based Upper Atmospheric Realtime Disaster Information and Alert Network (GUARDIAN) Near Real-Time Ionospheric Total Electron Count (5-second sampling, 24-hour files) from NASA CDDIS
Developed at JPL, GUARDIAN is a near-real-time (NRT) ionospheric monitoring software (Martire et al.). Its main products are NRT total electronic content (TEC) time series, allowing users to explore ionospheric TEC perturbations due to natural and anthropogenic events on Earth. The NRT GUARDIAN time series are validated against well-established post-processing methods. Currently, time series are computed for more than 90 GNSS ground stations distributed around the Pacific Ring of Fire, which monitor the four main GNSS constellations (GPS, Galileo, BDS, and GLONASS).
Global Navigation Satellite System (GNSS) IGS Decoded Orbit Solution (30-second) from IGS Real-Time Product Streams from NASA CDDIS
This derived product set consists of Global Navigation Satellite System satellite orbit products (daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure.These orbit products are generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. The product streams are combination solutions generated by processing individual real time solutions from participating IGS Real-time Analysis Centers (ACs). The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This derived product solution is one of the RTS solutions generated by decoding the real-time product streams. These files use the real-time data streams that are referred to the satellite center-of-mass (CoM). These orbit products have been provided in support of the IGS Real-Time Service (previously Real-Time Pilot Project) since February 2009, prior to the availability of real-time product streams. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All orbit solution files utilize the SP3 format and span 24 hours from 00:00 to 23:45 UTC.
Global Navigation Satellite System (GNSS) IGS Decoded Clock Solution (10-second) from IGS Real-Time Product Streams from NASA CDDIS
This derived product set consists of Global Navigation Satellite System satellite and receiver clock products (10-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. These clock products are generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format. These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. The product streams are combination solutions generated by processing individual real time solutions from participating IGS Real-time Analysis Centers (ACs). The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This derived product solution is one of the RTS solutions generated by decoding the real-time product streams. These files use the real-time data streams that are referred to the satellite center-of-mass (CoM). These clock products have been provided in support of the IGS Real-Time Service (previously Real-Time Pilot Project) since February 2009, prior to the availability of real-time product streams. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
Ground-Based Global Navigation Satellite System (GNSS) Data (1-second sampling, real-time streams) from NASA CDDIS
Global Navigation Satellite System (GNSS) real-time 1 to multi-second sampled data available from the Crustal Dynamics Data Information System (CDDIS). Global Navigation Satellite System (GNSS) provide autonomous geo-spatial positioning with global coverage. GNSS real-time data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs) are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure; CDDIS began streaming real-time data from these systems in 2015. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format.
A Prospective Study to Evaluate the Diagnostic Accuracy of Computer-aided Diagnosis (CADx) System in Real-time Characterization of Colorectal Neoplasia
ClinicalTrials.gov study NCT05414383. IPD Sharing: NO. Countries: 0. Publications: 0.
Non-invasive, Real-time Anesthetic Drug-monitoring System
ClinicalTrials.gov study NCT02776020. IPD Sharing: NO. Countries: 0. Publications: 0.
Wearable Real-Time Feedback System to Improve Gait and Posture in Parkinson's Disease
ClinicalTrials.gov study NCT03953222. IPD Sharing: NO. Countries: 0. Publications: 0.
Accuracy of Computer-aided (CADx) System in Real-time Characterization of Colorectal Ulcerative Diseases
ClinicalTrials.gov study NCT06207825. IPD Sharing: NO. Countries: 0. Publications: 0.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.