Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
18,658
datasets available to search
ShareScore release 0.9.0
Dataset results
18,658 results for “impacts”
A practical approach to measuring the biodiversity impacts of land conversion
<p><span>1. Further progress in reducing biodiversity loss relies on the improved quantification of the connections between drivers of habitat loss and subsequent biodiversity impacts. To this end, biodiversity impact metrics should be able to report linked trends in specific human activities and changes in biodiversity state, accounting for both the ecology of different species, and the cumulative effects of historical habitat losses. These characteristics are not currently captured within a single metric.</span></p> <p><span>2. Here we develop a globally applicable methodological framework that uses freely and publicly available datasets to quantify the relative impacts of anthropogenic activities on biodiversity. We use species-specific habitat suitability models to link specific land uses to ensuing changes in the likelihood that local populations of those species will persist. To illustrate our approach w</span>e assess the impacts of soy expansion and other land uses within <span>the Brazilian Cerrado</span> on <span>over 2,000 species of amphibians, birds, mammals and plants</span> for three periods between 2000 and 2014.</p> <p><span>3. Our results showed that mammals and plants suffered the greatest overall reduction of suitable habitat. However, among endemic and near-endemic species – which face greatest risk of global extinction from habitat conversion in the Cerrado – birds and mammals were the most affected groups. While conversion of natural vegetation to grassland and planted pastures were together responsible for most of the biodiversity impact of recent changes, </span>soy expansion (via direct conversion of natural vegetation) had the greatest impact per unit area. The total biodiversity impact of recent land-use change was concentrated in the southern states of the Cerrado -Minas Geráis, Goiás and Mato Grosso - but the impact on biodiversity of production of soy was greatest within the agricultural frontiers of Bahía and Piauí.</p> <p><span>4. </span>The flexibility of our approach to examine linkages between biodiversity loss and specific human activities has clear potential to better characterise the pathways by which habitat loss drivers operate. Its capacity to incorporate species-specific ecological needs, through a globally applicable methodology, can improve the tangibility of biodiversity loss assessments.</p>
Supporting model output for article "Relative Impact of Sea Ice and Temperature Changes on Arctic Marine Production"
<p>The following is a summary of processed model output data from a series of HiLAT model runs. A description of the model runs and visualization of model output and analysis can be found in the accompanying manuscript.</p> <p>Gibson, G.A., Weijer, W., Jeffery, N. and Wang, S (2020) Relative impact of sea ice and temperature changes on Arctic marine production. Journal of Geophysical Research: Biogeosciences. DOI: 10.1029/2019JG005343</p> <p>The model outputs and accompanying research was supported by the National Science Foundation 173886 and by DOE | SC |Biological and Environmental Research (BER).</p> <p>There are 4 versions of most output file types, corresponding to the 4 experiments that were conducted.</p> <p>These experiments are:</p> <p>i) the baseline model simulation (Base);</p> <p>ii) a moderate ice reduction experiment (S1);</p> <p>iii) a dramatic ice reduction experiment (S2); and</p> <p>iv) an atmospheric warming scenario (RCP45).</p> <p>Each of the 4 experiments is described in detail in Gibson et al (2020).</p> <p>Many variables in the output files are regional averages where model regions are indicated by a number *note - for aesthetics, the numbering used in the model output files differs slightly from the numbering used in the accompanying manuscript. </p> <p>Bering Sea =1</p> <p>Chukchi Sea =2 </p> <p>East Siberian Sea =3</p> <p>Laptev Sea =4 </p> <p>Beaufort Sea =5</p> <p>Barents Sea =6</p> <p>Canadian =7 </p> <p>Eurasian Basins =8 </p> <p>Nordic Seas =9</p> <p>Labrador Sea=10</p> <p>Kara Sea =11</p> <p> </p> <p><strong>Grid </strong></p> <p>gx1v6_polar_mask.10.12.18.nc This file is the original grid file used for all model runs with the addition of Arctic_Region and Antarctic_Polar_Front variables which indicates which grid cells are in the model regions described above.</p> <p> </p> <p><strong>Forcing</strong></p> <p>ncep_RCP45 ncep.t_10.T62.*.nc where * is 1948-2009 These files contain the modified atmospheric forcing used for the RCP45 model experiment. The unmodified NCEP forcing is freely publically available elsewhere to not duplicated here</p> <p> </p> <p><strong>Ice </strong></p> <p>Ice-Regional-Monthly-177-186-*.nc where * indicates model run - Base, S1, S2 or RCP45. These file contain the monthly averaged ice variables (ice area, ice algae production) for each model region for the last ten years of the model run.</p> <p> </p> <p>cice-monthly-177-186-*.nc where * indicates model run - Base, S1, S2 or RCP45. These file are the monthly averaged output filed from the cice model. Variables are averaged over each model analysis region.</p> <p> </p> <p>Ice_snow_depth_region_Avg-137-186-*.nc where * indicates model run - Base, S1, S2 or RCP45. These file contain the regionally averaged ice and snow depth for each analysis region.</p> <p> </p> <p>IceVol_Base-137-186.nc Contains ice variable file for the baseline model run. Model contains ice variables hi and aice for every grid cell of the model domain. Ice volume was computed as hi * Tarea (from grid file).</p> <p> </p> <p>Annual-SummerAvg-IceArea-177-186_*.nc Where * indicates model run - Base, S1, S2 or RCP45. Each of these files contains the annual average ice area averaged over Summer months (JuneAugust) for last 10 years of model run (200-2009) for each grid cell in the HiLAT model</p> <p> </p> <p><strong>Ocean variables </strong></p> <p>TempNitrate TEMP_NO-177-186.nc This file contains model estimates of temperature and nitrate for the baseline model run for model years 177-186 (2000-2009, the last en years of the model run) for the upper five model layers (500, 1500, 2500, 3500, 4500 cm).</p> <p> </p> <p><strong>CO2flux </strong></p> <p>AnnAvgAllCflux*.nc</p> <p>Where * indicates model run - Base, S1, S2 or RCP45. Each of these files contains the annual average CO2 Flux for last 10 years of model run (200-2009) for each grid cell of the HiLAT model.</p> <p> </p> <p>CO2flux_region_avg-177-186-*.nc Where * indicates model run - Base, S1, S2 or RCP45. Each of these files contains the annual average CO2 Flux for last 10 years of model run (2000-2009) for each region of the HiLAT model.</p> <p> </p> <p><strong>Ocean Production </strong></p> <p>OceanProd_Year-147-156-*.nc OceanProd_Year-157-166-*.nc OceanProd_Year-167-176-*.nc OceanProd_Year-177-186-*.nc Where * indicates model run - Base, S1, S2 or RCP45. These file contain the annual average vertically integrated ocean phytoplankton production for each grid cell. Each file contains 10 model years is the sum of diatoms, diazotrophs, phaeocystis, and smaller phytoplankton.</p> <p>Region_production_by_phyto_group-diat_ps-137-186-*.nc Where * indicates model run - Base, S1, S2 or RCP45. These file contain the annual average vertically integrated ocean phytoplankton production for each region. Each file contains group specific production for diatoms, diazotrophs, phaeocystis, and smaller phytoplankton.</p> <p>OceanProd_Daily-177-186-BASE.nc This file contains the daily average vertically integrated ocean phytoplankton production for each grid cell. The file contains 10 model years. Production is the sum of all four phytoplankton groups - diatoms, diazotrophs, phaeocystis, and smaller phytoplankton.</p> <p> </p> <p><strong>PAR </strong></p> <p>PAR-MonthyAvg-177-168-*.nc</p> <p>Photosynthetically Active Radiation in the ocean. Where * indicates model run - Base, S1, S2 or RCP45.</p>
Supplementary material 5 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Table S2. Abbreviations of species names as shown in Figure 5
Supplementary material 2 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Maximum vegetation height in summer and spring
Supplementary material 10 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Dataset environment and vegetation characteristics
Supplementary material 6 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Figure S2. Micro-habitat specific impact of I. glandulifera on the resident vegetation
Supplementary material 9 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Dataset plant cover
Supplementary material 1 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Year-to-year changes in cover of Impatiens glandulifera
Supplementary material 8 from: Bieberich J, Feldhaar H, Lauerer M (2020) Micro-habitat and season dependent impact of the invasive Impatiens glandulifera on native vegetation. NeoBiota 57: 109-131. https://doi.org/10.3897/neobiota.57.51331
Additional information: information on the published datasets
Investigating the impact of human settlements upon the availability of larval habitats and Aedes albopictus population
<b>Description: </b><p>This experiment analysed the impact of human settlements upon Aedes albopictus populations. Surveys were conducted in natural environments (twice-logged forest) and human settlements in oil palm and logged forest. At each study site, three surveys were conducted: <br><br>1) Aquatic Habitat Survey: within the study area, all bodies of water were analysed for abiotic characteristics – container type, water volume, air temperature, water temperature, canopy cover and turbidity. <br>2) Larval Survey: for each body of water, the number of and stage of larvae/pupae was recorded. Larvae/pupae were extracted from the water, reared to adults and Ae. albopictus were identified. <br>3) Adult Population Survey: human landing catches were conducted to collect Ae. albopictus adults. Abundance and sex ratio was recorded for each location, and the wing span of each individual was taken. </p><p><b>Project: </b>This dataset was collected as part of the following SAFE research project: <a href="https://www.safeproject.net/projects/project_view/202"><b>Investigating the impact of human settlements upon the availability of larval habitats and Aedes albopictus populations</b></a></p><p><b>Funding: </b>These data were collected as part of research funded by: </p><ul><li>SAFE - Tropical Forest Ecology Masters (Studentship)</li></ul><p>This dataset is released under the CC-BY 4.0 licence, requiring that you cite the dataset in any outputs, but has the additional condition that you acknowledge the contribution of these funders in any outputs.</p><p></p><p><b>Permits: </b>These data were collected under permit from the following authorities:</p><ul><li>Sabah Biodiversity Centre (Research licence JKM/MBS.1000-2/2 JDL.8 (59))</li><li>Medical Research & Ethics Committee (Ethics licence NMRR-17-3242-39250 (IIR))</li></ul><p></p><p><b>XML metadata: </b>GEMINI compliant metadata for this dataset is available <a href="https://www.safeproject.net/datasets/xml_metadata?id=3929764">here</a></p><p><b>Files: </b>This dataset consists of 4 files: M_Vollans_Larval_Habitats_19v2.xlsx, Larval_Adult_ID.zip, HLC_Wing_Length.zip, Larval_Habitat_Photos.zip</p><p><b>M_Vollans_Larval_Habitats_19v2.xlsx</b></p><p>This file contains dataset metadata and 4 data tables:</p><ol><li><p><b>Aquatic Habitat Survey</b> (described in worksheet AquaticHabitatSurvey)</p><p>Description: AquaticHabitatSurvey</p><p>Number of fields: 30</p><p>Number of data rows: 89</p><p>Fields: </p><ul><li><b>Date</b>: Date of survey (Field type: date)</li><li><b>Land_Type</b>: Details of Land-Type (Field type: categorical)</li><li><b>Location</b>: Details of location. OP = Oil Palm, LF = Logged Forest (Field type: categorical)</li><li><b>Replicate</b>: Details location, as named in location sheet. To 'replicate' resolution. (Field type: location)</li><li><b>Number_10m^2_Square</b>: Number 10m^2 surveyed (Field type: replicate)</li><li><b>Sampling_Region</b>: Details of 10m^2 the aquatic habitat corresponds to: in human settlements, this is the type of building, and in natural environments, the compass direction of the square from the second order point (N/S/E/W). (Field type: replicate)</li><li><b>Elevation</b>: Elevation from GPS (Field type: numeric)</li><li><b>GPS_file_name</b>: File name saved on GPS (Field type: id)</li><li><b>Access_Available</b>: Record of whether able to access the aquatic habitat (Field type: categorical)</li><li><b>Comments</b>: General comments on aquatic habitat (Field type: comments)</li><li><b>Canopy_cover</b>: Record of canopy cover. NA where inside. Data incomplete. (Field type: numeric)</li><li><b>Inside/Outside</b>: Record of whether the aquatic habitat is inside or outside (NA for natural land types, where all larval habitats are outside). (Field type: categorical)</li><li><b>Water_Turbidity</b>: Water turbidity, subjective categorization by a consistant surveyer. (Field type: categorical)</li><li><b>Water_Temperature</b>: Temperature of the water in the aquatic habitat. NOTE: potential faulty equipment. This data was not used in analysis. (Field type: numeric)</li><li><b>Air_Temperature</b>: Temperature of the air directly above the aquatic habitat. (Field type: numeric)</li><li><b>Type_Aquatic_Habitat</b>: Record of the type of aquatic habitat (Field type: categorical)</li><li><b>In_Constant_Use</b>: Record of whether the aquatic habitat is in constant use. (Field type: categorical)</li><li><b>Water_Volume</b>: Total water volume of the aquatic habitat (Field type: numeric)</li><li><b>Radius</b>: Radius of the aquatic habitat (Field type: numeric)</li><li><b>Diameter</b>: Diameter of the aquatic habitat (Field type: numeric)</li><li><b>Length</b>: Length of the aquatic habitat (Field type: numeric)</li><li><b>Width</b>: Width of the aquatic habitat (Field type: numeric)</li><li><b>Water_Depth</b>: Depth of the water in the aquatic habitat (Field type: numeric)</li><li><b>Larval/Pupal_Presence</b>: Record of whether larvae/ pupae are present in the aquatic habitat. (Field type: categorical)</li><li><b>Total_Number_Larvae/Pupae</b>: The total number of larvae / pupae found within an aquatic habitat. (Field type: numeric)</li><li><b>1/2_Instar_Larvae_Number</b>: The number of 1st and 2nd instar larvae found within an aquatic habitat. (Field type: numeric)</li><li><b>3/4_Instar_Larvae_Number</b>: The number of 3rd and 4th instar larvae found within an aquatic habitat. (Field type: numeric)</li><li><b>Pupae_Number</b>: The number of pupae found within an aquatic habitat. (Field type: numeric)</li><li><b>Further_comments</b>: Further comments on aquatic habitat. (Field type: comments)</li><li><b>Photo.folder.name</b>: Folder name containing photos of the study site. (Field type: id)</li></ul></li><li><p><b>Larva lAdult ID</b> (described in worksheet LarvalAdultID)</p><p>Description: LarvalAdultID</p><p>Number of fields: 6</p><p>Number of data rows: 76</p><p>Fields: </p><ul><li><b>Date_of_ID</b>: Date of survey (Field type: date)</li><li><b>Ae.albopictus</b>: Record of whether adults are Ae. albopictus, or some other member of the Culicidae (Field type: taxa)</li><li><b>Location</b>: Details of location. (Field type: location)</li><li><b>Wing_length</b>: Measurement of wing length. (Field type: numeric trait)</li><li><b>Photo_folder_ID</b>: Folder name containing photos for adult ID and wing length. (Field type: id)</li><li><b>Comments</b>: General comments about identification / wingspan measurement. (Field type: comments)</li></ul></li><li><p><b>HLC overview</b> (described in worksheet HLCoverview)</p><p>Description: HLCoverview</p><p>Number of fields: 8</p><p>Number of data rows: 16</p><p>Fields: </p><ul><li><b>Date</b>: Date of survey (Field type: date)</li><li><b>Location</b>: Broad location of where HLC occurred. (Field type: location)</li><li><b>Comments</b>: Qualitative details about exact location. (Field type: comments)</li><li><b>Ae.albopictus</b>: Number of Ae. albopictus obtained during a single 1.5 hour sample. (Field type: abundance)</li><li><b>Number_of_males</b>: Number of Ae. albopictus males (Field type: numeric)</li><li><b>Sex_Ratio_(M/Total)</b>: Sex Ratio (number of males / total number) (Field type: numeric)</li><li><b>Survey_complete</b>: Record if it was possible to complete the HLC survey. (Field type: categorical)</li><li><b>Further_comments</b>: Further comments (Field type: comments)</li></ul></li><li><p><b>HLC adult ID</b> (described in worksheet HLCadultID)</p><p>Description: HLCadultID</p><p>Number of fields: 8</p><p>Number of data rows: 111</p><p>Fields: </p><ul><li><b>Date</b>: Date of sampling (Field type: date)</li><li><b>Location</b>: Broad location of where HLC occurred. (Field type: location)</li><li><b>Specific_Location</b>: Qualitative details about exact location. (Field type: comments)</li><li><b>Sex</b>: Sex (Field type: categorical)</li><li><b>Wing Length</b>: Wing length measurement (Field type: numeric trait)</li><li><b>Weather</b>: Weather description (Field type: categorical)</li><li><b>Comments</b>: Comments on wing dissection issues. (Field type: comments)</li><li><b>Photo_Code</b>: Folder name containing wing length photos. (Field type: id)</li></ul></li></ol><p><b>Larval_Adult_ID.zip</b></p><p>Description: Zip file containing JPEG images to ID adult mosquitoes reared from collected larvae. </p><p><b>HLC_Wing_Length.zip</b></p><p>Description: Zip file containing JPEG images of the wingspan of adult mosquitoes collected via HLC. </p><p><b>Larval_Habitat_Photos.zip</b></p><p>Description: Zip file containing photos of some of the larval habitats encountered, and some general landscapes. </p><p><b>Date range: </b>2019-04-03 to 2019-05-06</p><p><b>Latitudinal extent: </b>4.5000 to 5.0700</p><p><b>Longitudinal extent: </b>116.7500 to 117.8200</p><p><b>Taxonomic coverage: </b><br> All taxon names are validated against the GBIF backbone taxonomy. If a dataset uses a synonym, the accepted usage is shown followed by the dataset usage in brackets. Taxa that cannot be validated, including new species and other unknown taxa, morphospecies, functional groups and taxonomic levels not used in the GBIF backbone are shown in square brackets.</p><div> -  Animalia <br> -  -  Arthropoda <br> -  -  -  Insecta <br> -  -  -  -  Diptera <br> -  -  -  -  -  Culicidae <br> -  -  -  -  -  -  <i>Aedes</i> <br> -  -  -  -  -  -  -  <i>Aedes albopictus</i> <br></div><p></p>
Environmental exposure model for copper oxide nanoparticles impact in estuarine ecosystem services
<p>Modelling the effect of copper oxide nanoparticles (< 50 nm) on denitrification rate and abundance and transcription of genes of the denitrification pathway on a temperate estuary.</p>
d5-7-city-impact-analysis-report
<p>This dataset contains the report of each ClairCity case study part of the deliverable D5.7, which collects all results of the full impact analysis, methodological approach and data sources.</p> <ul> <li><strong>D5.7 - City Impact Analysis Report - Methodology</strong><br> file: d5.7-city-impact-analysis-report.pdf<br> The Deliverable 5.7 collects all results of the full impact analysis, methodological approach and data sources.</li> <li><strong>D5.7 - Bristol</strong><br> file: d5.7-bristol.pdf<br> D5.7 Bristol final sub-report</li> <li><strong>D5.7 - Amsterdam</strong><br> file: d5.7-amsterdam.pdf<br> D5.7 Amsterdam final sub-report</li> <li><strong>D5.7 - Ljubljana</strong><br> file: d5.7-ljubljana.pdf<br> D5.7 Ljubljana final sub-report</li> <li><strong>D5.7 - Sosnowiec</strong><br> file: d5.7-sosnowiec.pdf<br> D5.7 Sosnowiec final sub-report</li> <li><strong>D5.7 - Liguria region</strong><br> file: d5.7-liguria-region.pdf<br> D5.7 Liguria Region final sub-report</li> <li><strong>D5.7 - Aveiro region</strong><br> file: d5.7-aveiro-region.pdf<br> D5.7 Aveiro Region final sub-report</li> </ul>
d5-6-assessment-of-impacts-sosnowiec
<p>Data output from the tool set application for the assessment of the environmental (emissions, carbon footprint, ambient air concentrations), health (exposure and health effects), and economic impacts (e.g. health-related costs).</p> <ul> <li><strong>Sosnowiec shapefile</strong><br> file: sosnowiec.7z<br> Shapefile with the urban scale domain over Sosnowiec with 20 km x 20 km</li> <li><strong>2_SOS_Agriculture_baseline</strong><br> file: claircity_agricultureemissions_sos_jan2019.pdf<br> Emissions (in kg/year) were based on EMEP emission inventory for livestock (emissions from agriculture are not available) at 0.1x0.1 degrees resolution (~ 10 km) for the year 2015 disaggregated for the urban domain of Sosnowiec by farms, meadows, vineyards land uses classified in the Open Street Map database.</li> <li><strong>3_SOS_Air Quality_Baseline (mesoscale/NO2 concentrations)</strong><br> file: no2_2010010100_2010123123_lcc.png<br> Annual NO2 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_SOS_Air Quality_Baseline (mesoscale/PM2.5 concentrations)</strong><br> file: pm2.5_2010010100_2010123123_lcc.png<br> Annual PM2.5 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_SOS_Air Quality_Baseline (mesoscale/PM10 concentrations)</strong><br> file: pm10_2010010100_2010123123_lcc.png<br> Annual PM10 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_SOS_Air Quality_Baseline (urban scale/ NO2 concentrations)</strong><br> file: sos_aq2app_no2.txt<br> Annual NO2 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_SOS_Air Quality_Baseline (urban scale/ PM10 concentrations)</strong><br> file: sos_aq2app_pm10.txt<br> Annual PM10 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_SOS_Air Quality_Baseline (urban scale/ PM2.5 concentrations)</strong><br> file: sos_aq2app_pm2.txt<br> Annual PM2.5 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_SOS_Air Quality_Baseline (mesoscale-report)</strong><br> file: sos_mesoscale.pdf<br> This report provides an overview of the modelling approach used to characterize the air quality in the Sosnowiec region, which includes a detailed description of the air quality modelling system WRF-CAMx (section 1.1.) and a description of the methodology applied to evaluate the model performance (section 1.2.). It also includes results of concentration fields and a source apportionment for NO2, PM10 and PM2.5.</li> <li><strong>6_SOS_CarbonFootprint_Baseline</strong><br> file: ech.ma.15-fr2-wp5-carbon-footprint-ed2.pdf<br> Carbon footprint methodologies and estimation for the baseline year for Sosnowiec</li> <li><strong>3_SOS_Air Quality_Baseline (urbanscale-report)</strong><br> file: sos_aq_urbanscale_report.pdf<br> This report provides a brief overview oh the methodology used. It presents an analysis of concentration fields for NO2, PM10, PM2.5 of the total and by modeled sectors, it also includes an analysis of the source contribution and for the maximum values.</li> <li><strong>2_SOS_IRCI_baseline</strong><br> file: ech.ma.15-fr1-wp5-irc-ed5.3.pdf</li> <li><strong>2_SOS_IRCI_Scenarios</strong><br> file: ech.ma.15-fr3-wp5-irc-future-ed5.pdf</li> <li><strong>2_SOS_temporal_profiles</strong><br> file: sosnowiec-daily_hourlytd_res_comm_emi.xlsx<br> Temporal profiles of Sosnowiec's residential sector and commercial sector scale in %: Daily emissions, typical days emissions and hourly typical days emissions of PM10 and NOX variables.</li> <li><strong>2_SOS_Transport_baseline_map</strong><br> file: roadnetwork_sos.zip<br> Map with lines, link with emissions using filed "ID"</li> <li><strong>2_SOS_Transport_baseline_values</strong><br> file: emission_values_sos.zip<br> Part 2 of 2 files that make the Sosnowiec transport emissions baseline: total emissions per link in .csv: To be linked to the road network file using the identifier "uniqueID" shapefile with road links units: g emissions at link level consisting of a zip file with 2 .csv-files, in the following format: first column: link-ID (link with shapefile of the road network) second column: pollutant (PM, PM non-exhaust or NOx) third column: mode ("BESTEL"= van or light freight, "MIDZWVR" = medium freight, "MOTOR" = motorcycles, "OVBUS" = bus, "PERSAUTO" = passenger cars, "ZWAARVR" = heavy freight columns D-AY: hourly intervals for weekday ("WD") and weekend ("WE") all units in g 2 files with values: aggregates over type, by type of day, per hour of day and a separate file for annual totals (at link level, per pollutant (including FC))</li> <li><strong>2_SOS_transport_scenarios</strong><br> file: copy-of-190915_sos_scenario_results_summary_with_ups.xlsx<br> This data-set reflects the relative changes of road transport emissions in different years and scenario's compared to the baseline. 2 sets of scenario's are given, one per tab: "SDW": BAU & scenario's established in the stakeholder dialogue workshop "UPS": updated BAU (if applicable) & final Unified Policy Scenario (UPS) selected in the policy workshop. reported for 3 future years compared to the 2015 baseline: 2025, 2035 and 2050 reported for NOx & PM for 6 modes: "MIDZWR": medium truck "ZWVR": heavy truck "BUS": busses "MOTO": motorcycles "CAR": passenger cars "VAN": light freight, assumed to be a mix of passenger cars and medium trucks all units: %</li> <li><strong>5_SOS_health_statistics </strong><br> file: sos_health-analysis.xlsx<br> demographics and population data to calculate the health statistics</li> <li><strong>5_SOS_health_scenarios</strong><br> file: summary_results_sos.xlsx<br> Health-related impacts (selected mortality and morbidity endpoints) related to exposure to PM2.5, NO2, and PM10, considering concentration-response functions and baseline concentrations recommended by WHO.</li> <li><strong>3_SOS_NO2_AQ_latlong</strong><br> file: sos_no2_latlong.rar<br> The shapefile includes total NO2 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_SOS_PM2_AQ_latlong</strong><br> file: sos_pm2_latlong.rar<br> The shapefile includes total PM2 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_SOS_PM10_AQ_latlong</strong><br> file: sos_pm10_latlong.rar<br> The shapefile includes total PM10 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>6_SOS_CarbonFootprint_Scenarios</strong><br> file: ech.ma.15-fr4-wp5-carbon-footprint-future-ed3-.pdf<br> Carbon footprint business as usual and scenario projections for Sosnowiec</li> <li><strong>3_SOS_Air Quality_Baseline (mesoscale/SourceApportionment)</strong><br> file: sos_psat.xlsx<br> Time series of daily average contributions for each source group for PM10, PM2.5 and NO2 concentrations from WRF-CAMx modelling system with the SA tool, for the Sosnowiec urban area.</li> <li><strong>3_SOS_Air Quality Scenarios_urban scale NO2 matrix</strong><br> file: sos_no2_scenarios.mat<br> Annual NO2 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_SOS_Air Quality Scenarios_ urban scale PM10 matrix</strong><br> file: sos_pm10_scenarios.mat<br> Annual PM10 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_SOS_Air Quality Scenarios_urban scale PM2 matrix</strong><br> file: sos_pm2_scenarios.mat<br> Annual PM2.5 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_SOS_Exposure_EU_Baseline NO2 matrix</strong><br> file: sos_no2_exposureeu_baseline.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_SOS_Exposure_EU_Baseline PM10 matrix</strong><br> file: sos_pm10_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_SOS_Exposure_WHO_Baseline PM10 matrix</strong><br> file: sos_pm10_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for the baseline year.</li> <li><strong>4_SOS_Exposure_EU_Baseline PM2 matrix</strong><br> file: sos_pm2_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for the baseline year.</li> <li><strong>4_SOS_Exposure_WHO_Baseline PM2 matrix</strong><br> file: sos_pm2_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for the baseline year.</li> <li><strong>4_SOS_Exposure_EU_Scenarios NO2 matrix</strong><br> file: sos_no2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_SOS_Exposure_EU_Scenarios PM10 matrix</strong><br> file: sos_pm10_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_SOS_Exposure_WHO_Scenarios PM10 matrix</strong><br> file: sos_pm10_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_SOS_Exposure_EU_Scenarios PM2 matrix</strong><br> file: sos_pm2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_SOS_Exposure_WHO_Scenarios PM2 matrix</strong><br> file: sos_pm2_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for BAU, scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> </ul>
d5-6-assessment-of-impacts-aveiro
<p>Data output from the tool set application for the assessment of the environmental (emissions, carbon footprint, ambient air concentrations), health (exposure and health effects), and economic impacts (e.g. health-related costs).</p> <ul> <li><strong>CIRA shapefile</strong><br> file: cira.7z<br> Shapefile with the urban scale domain over CIRA/ Aveiro region with 40 km x 55 km</li> <li><strong>2_CIRA_ Natural _baseline</strong><br> file: claircity_naturalemissions_cira_jan2019.pdf<br> Emissions (in kg/year) were based on EMEP emission inventory for nature at 0.1x0.1 degrees resolution (~ 10 km) for the year 2015 disaggregated for the urban domain of CIRA by forest, grass, parks and nature reserve areas classified in the Open Street Map database.</li> <li><strong>2_CIRA_Agriculture_baseline</strong><br> file: claircity_agricultureemissions_cira_jan2019.pdf<br> Emissions (in kg/year) were based on EMEP emission inventory for agriculture and livestock at 0.1x0.1 degrees resolution (~ 10 km) for the year 2015 disaggregated for the urban domain of CIRA by farms, meadows, vineyards land uses classified in the Open Street Map database</li> <li><strong>3_CIRA_Air Quality_Baseline (mesoscale/NO2 concentrations)</strong><br> file: no2_2010010100_2010123123_lcc.png<br> Annual NO2 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_CIRA_Air Quality_Baseline (mesoscale/PM2.5 concentrations)</strong><br> file: pm2.5_2010010100_2010123123_lcc.png<br> Annual PM2.5 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_CIRA_Air Quality_Baseline (mesoscale/PM10 concentrations)</strong><br> file: pm10_2010010100_2010123123_lcc.png<br> Annual PM10 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_CIRA_Air Quality_Baseline (urban scale/ NO2 concentrations)</strong><br> file: cira_aq2app_no2.txt<br> Annual NO2 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_CIRA_Air Quality_Baseline (urban scale/ PM10 concentrations)</strong><br> file: cira_aq2app_pm10.txt<br> Annual PM10 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_CIRA_Air Quality_Baseline (urban scale/ PM2.5 concentrations)</strong><br> file: cira_aq2app_pm2.5.txt<br> Annual PM2.5 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>6_CIRA_CarbonFootprint_baseline</strong><br> file: ech.ma.15-fr2-wp5-carbon-footprint-ed2.pdf<br> Carbon footprint methodologies and estimation for the baseline year for Aveiro Region</li> <li><strong>3_CIRA_Air Quality_Baseline (mesoscale-report)</strong><br> file: cira_mesoscale.pdf<br> This report provides an overview of the modelling approach used to characterize the air quality in the Aveiro region, which includes a detailed description of the air quality modelling system WRF-CAMx (section 1.1.) and a description of the methodology applied to evaluate the model performance (section 1.2.). It also includes results of concentration fields and a source apportionment for NO2, PM10 and PM2.5.</li> <li><strong>3_CIRA_Air Quality_Baseline (urbanscale-report)</strong><br> file: cira_aq_urbanscale_report.pdf<br> This report provides a brief overview oh the methodology used. It presents an analysis of concentration fields for NO2, PM10, PM2.5 of the total and by modeled sectors, it also includes an analysis of the source contribution and for the maximum values.</li> <li><strong>2_CIRA_IRCI_baseline</strong><br> file: ech.ma.15-fr1-wp5-irc-ed5.3.pdf</li> <li><strong>2_CIRA_IRCI_Scenarios</strong><br> file: ech.ma.15-fr3-wp5-irc-future-ed5.pdf</li> <li><strong>2_CIRA_temporal_profiles</strong><br> file: aveiro-daily_hourlytd_res_comm_emi.xlsx<br> Temporal profiles of CIRA's residential sector and commercial sector scale in %: Daily emissions, typical days emissions and hourly typical days emissions of PM10 and NOX variables.</li> <li><strong>2_CIRA_Transport_baseline_map</strong><br> file: roadnetwork_cira.zip<br> Map with lines, link with emissions using filed "ID" import as text delimited file, use string for georeference. WGS84 Distinction is made between the core area and the periphery</li> <li><strong>2_CIRA_Transport_baseline_values</strong><br> file: emission_values_cira.zip<br> Part 2 of 2 files that make the CIRA transport emissions baseline: total emissions per link in .csv: To be linked to the road network file using the identifier "uniqueID" shapefile with road links units: g emissions at link level consisting of a zip file with 4 .csv-files, in the following format: first column: link-ID (link with shapefile of the road network) second column: pollutant (PM, PM non-exhaust or NOx) third column: mode ("BESTEL"= van or light freight, "MIDZWVR" = medium freight, "MOTOR" = motorcycles, "OVBUS" = bus, "PERSAUTO" = passenger cars, "ZWAARVR" = heavy freight columns D-AY: hourly intervals for weekday ("WD") and weekend ("WE") all units in g First distinction is made between core area and the periphery. data files need to be linked with the correct map-file from part 1 Second distinction is made between aggregates (over type, by type of day, per hour of day) and a separate file for annual totals (at link level, per pollutant (including FC))</li> <li><strong>2_CIRA_transport_scenarios_CITY</strong><br> file: 191001_aveicity_scenario_results_summary_withups.xlsx<br> This data-set reflects the relative changes of road transport emissions in different years and scenario's compared to the baseline. 2 sets of scenario's are given, one per tab: "SDW": BAU & scenario's established in the stakeholder dialogue workshop "UPS": updated BAU (if applicable) & final Unified Policy Scenario (UPS) selected in the policy workshop. reported for 3 future years compared to the 2015 baseline: 2025, 2035 and 2050 reported for NOx & PM for 6 modes: "MIDZWR": medium truck "ZWVR": heavy truck "BUS": busses "MOTO": motorcycles "CAR": passenger cars "VAN": light freight, assumed to be a mix of passenger cars and medium trucks all units: % These values are valid for the city-area's of Aveiro</li> <li><strong>2_CIRA_transport_scenarios_REGION</strong><br> file: 191001_aveiregion_scenario_results_summary_withups.xlsx<br> This data-set reflects the relative changes of road transport emissions in different years and scenario's compared to the baseline. 2 sets of scenario's are given, one per tab: "SDW": BAU & scenario's established in the stakeholder dialogue workshop "UPS": updated BAU (if applicable) & final Unified Policy Scenario (UPS) selected in the policy workshop. reported for 3 future years compared to the 2015 baseline: 2025, 2035 and 2050 reported for NOx & PM for 6 modes: "MIDZWR": medium truck "ZWVR": heavy truck "BUS": busses "MOTO": motorcycles "CAR": passenger cars "VAN": light freight, assumed to be a mix of passenger cars and medium trucks all units: % These values are valid for the region of Aveiro, excluding the city area's</li> <li><strong>5_CIRA_health_statistics</strong><br> file: cira_health-analysis.xlsx<br> demographics and population data to calculate the health statistics</li> <li><strong>5_CIRA_health_scenarios</strong><br> file: summary_results_cira.xlsx<br> Health-related impacts (selected mortality and morbidity endpoints) related to exposure to PM2.5, NO2, and PM10, considering concentration-response functions and baseline concentrations recommended by WHO.</li> <li><strong>3_CIRA_NO2_AQ_latlong</strong><br> file: cira_no2_latlong.rar<br> The shapefile includes total NO2 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_CIRA_PM2_AQ_latlong</strong><br> file: cira_pm2_latlong.rar<br> The shapefile includes total PM2 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_CIRA_PM10_AQ_latlong</strong><br> file: cira_pm10_latlong.rar<br> The shapefile includes total PM10 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>6_CIRA_CarbonFootprint_Scenarios</strong><br> file: ech.ma.15-fr4-wp5-carbon-footprint-future-ed3-.pdf<br> Carbon footprint business as usual and scenario projections for Aveiro region</li> <li><strong>3_CIRA_Air Quality_Baseline (mesoscale/SourceApportionment)</strong><br> file: cira_psat.xlsx<br> Time series of daily average contributions for each source group for PM10, PM2.5 and NO2 concentrations from WRF-CAMx modelling system with the SA tool, for the Aveiro Region urban area.</li> <li><strong>3_CIRA_Air Quality Scenarios_urban scale NO2 matrix</strong><br> file: cira_no2_scenarios.mat<br> Annual NO2 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_CIRA_Air Quality Scenarios_ urban scale PM10 matrix</strong><br> file: cira_pm10_scenarios.mat<br> Annual PM10 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_CIRA_Air Quality Scenarios_urban scale PM2 matrix</strong><br> file: cira_pm2_scenarios.mat<br> Annual PM2.5 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_CIRA_Exposure_EU_Baseline NO2 matrix</strong><br> file: cira_no2_exposureeu_baseline.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_CIRA_Exposure_EU_Baseline PM10 matrix</strong><br> file: cira_pm10_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_CIRA_Exposure_WHO_Baseline PM10 matrix</strong><br> file: cira_pm10_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for the baseline year.</li> <li><strong>4_CIRA_Exposure_EU_Baseline PM2 matrix</strong><br> file: cira_pm2_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for the baseline year.</li> <li><strong>4_CIRA_Exposure_WHO_Baseline PM2 matrix</strong><br> file: cira_pm2_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for the baseline year.</li> <li><strong>4_CIRA_Exposure_EU_Scenarios NO2 matrix</strong><br> file: cira_no2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_CIRA_Exposure_EU_Scenarios PM10 matrix</strong><br> file: cira_pm10_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_CIRA_Exposure_WHO_Scenarios PM10 matrix</strong><br> file: cira_pm10_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_CIRA_Exposure_EU_Scenarios PM2 matrix</strong><br> file: cira_pm2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_CIRA_Exposure_WHO_Scenarios PM2 matrix</strong><br> file: cira_pm2_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for BAU, scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> </ul>
d5-6-assessment-of-impacts-amsterdam
<p>Data output from the tool set application for the assessment of the environmental (emissions, carbon footprint, ambient air concentrations), health (exposure and health effects), and economic impacts (e.g. health-related costs).</p> <ul> <li><strong>Amsterdam shapefile</strong><br> file: amsterdam.7z<br> Shapefile with the urban scale domain over Amsterdam with 25 km x 20 km</li> <li><strong>2_AMS_Agriculture_baseline</strong><br> file: claircity_agricultureemissions_ams_jan2019.pdf<br> Emissions (in kg/year) were based on EMEP emission inventory for agriculture and livestock at 0.1x0.1 degrees resolution (~ 10 km) for the year 2015 disaggregated for the urban domain of Amsterdam by farms, meadows, vineyards land uses classified in the Open Street Map database</li> <li><strong>3_AMS_Air Quality_Baseline (mesoscale/NO2 concentrations</strong><br> file: no2_2010010100_2010123123_lcc.png<br> Annual NO2 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_AMS_Air Quality_Baseline (mesoscale/PM10 concentrations</strong><br> file: pm10_2010010100_2010123123_lcc.png<br> Annual PM10 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_AMS_Air Quality_Baseline (mesoscale/PM2.5 concentrations)</strong><br> file: pm2.5_2010010100_2010123123_lcc.png<br> Annual PM2.5 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_AMS_Air Quality_Baseline (urban scale/ NO2 concentrations)</strong><br> file: ams_aq2app_no2.txt<br> Annual NO2 average concentrations from URBAIR model</li> <li><strong>3_AMS_Air Quality_Baseline (urban scale/ PM10 concentrations)</strong><br> file: ams_aq2app_pm10.txt<br> Annual PM10 average concentrations from URBAIR model</li> <li><strong>3_AMS_Air Quality_Baseline (urban scale/PM2.5 concentrations)</strong><br> file: ams_aq2app_pm2.txt<br> Annual PM2.5 average concentrations from URBAIR model</li> <li><strong>6_AMS_CarbonFootprint_Baseline</strong><br> file: ech.ma.15-fr2-wp5-carbon-footprint-ed2.pdf<br> Carbon footprint methodologies and estimation for the baseline year for Amsterdam</li> <li><strong>3_AMS_Air Quality_Baseline (mesoscale-report)</strong><br> file: ams_mesoscale.pdf<br> This report provides an overview of the modelling approach used to characterize the air quality in the Amsterdam region, which includes a detailed description of the air quality modelling system WRF-CAMx (section 1.1.) and a description of the methodology applied to evaluate the model performance (section 1.2.). It also includes results of concentration fields and a source apportionment for NO2, PM10 and PM2.5.</li> <li><strong>3_AMS_Air Quality_Baseline (urbanscale-report)</strong><br> file: ams_aq_urbanscale_report.pdf<br> This report provides a brief overview oh the methodology used. It presents an analysis of concentration fields for NO2, PM10, PM2.5 of the total and by modeled sectors, it also includes an analysis of the source contribution and for the maximum values.</li> <li><strong>2_AMS_IRCI_baseline</strong><br> file: ech.ma.15-fr1-wp5-irc-ed5.3.pdf</li> <li><strong>2_AMS_IRCI_Scenarios</strong><br> file: ech.ma.15-fr3-wp5-irc-future-ed5.pdf</li> <li><strong>2_AMS_temporal_profiles</strong><br> file: ams-daily_hourlytd_res_comm_emi.xlsx<br> Temporal profiles of Amsterdam's residential sector and commercial sector scale in %: Daily emissions, typical days emissions and hourly typical days emissions of PM10 and NOX variables.</li> <li><strong>2_AMS_Transport_source_apportionment</strong><br> file: 191125_adam_v2.xlsx<br> describes the share of road transport emissions by behavior-properties and population properties. Pure data & pivot-table for easy use: male/female 3 income-classes 5 age groups 3 car-ownership groups (0, 1, 2 or more) Time of day: morning-, evening peak, midday and night Type of day (weekend/weekday) Motive: 6 classes mode:</li> <li><strong>2_AMS_Transport_baseline_map</strong><br> file: roadnetwork_ams.zip<br> The road network - link with emissions using "linkID"</li> <li><strong>2_AMS_Transport_baseline_emissions</strong><br> file: ams_emissions.zip<br> Part 2 of 2 files that make the Amsterdam transport emissions baseline: total emissions per link in .csv per pollutant (NOx, PM non-exhaust and PM): To be linked to the road network file using the identifier "uniqueID" format: first column: link-ID (link with shapefile of the road network) second column: pollutant (PM, PM non-exhaust or NOx) third column: mode ("BESTEL"= van or light freight, "MIDZWVR" = medium freight, "MOTOR" = motorcycles, "OVBUS" = bus, "PERSAUTO" = passenger cars, "ZWAARVR" = heavy freight columns D-AY: hourly intervals for weekday ("WD") and weekend ("WE") all units in g</li> <li><strong>2_AMS_transport_scenarios</strong><br> file: copy-of-190429_adam_scenario_results_summary_v2.xlsx<br> This data-set reflects the relative changes of road transport emissions in different years and scenario's compared to the baseline. 2 sets of scenario's are given, one per tab: "SDW": BAU & scenario's established in the stakeholder dialogue workshop "UPS": updated BAU (if applicable) & final Unified Policy Scenario (UPS) selected in the policy workshop. reported for 3 future years compared to the 2015 baseline: 2025, 2035 and 2050 reported for NOx & PM for 6 modes: "MIDZWR": medium truck "ZWVR": heavy truck "BUS": busses "MOTO": motorcycles "CAR": passenger cars "VAN": light freight, assumed to be a mix of passenger cars and medium trucks all units: %</li> <li><strong>5_AMS_health_scenarios</strong><br> file: summary_results_ams.xlsx<br> Health-related impacts (selected mortality and morbidity endpoints) related to exposure to PM2.5, NO2, and PM10, considering concentration-response functions and baseline concentrations recommended by WHO.</li> <li><strong>5_AMS_health_statistics</strong><br> file: ams_health-analysis.xlsx<br> demographics and population data to calculate the health statistics</li> <li><strong>3_AMS_NO2_AQ_latlong</strong><br> file: ams_no2_latlong.rar<br> The shapefile includes total NO2 concentrations (µg/m^3) , as well as concentrations by sector (transport, shipping, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_AMS_PM2_AQ_latlong</strong><br> file: ams_pm2_latlong.rar<br> The shapefile includes total PM2 concentrations (µg/m^3) , as well as concentrations by sector (transport, shipping, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_AMS_PM10_AQ_latlong</strong><br> file: ams_pm10_latlong.rar<br> The shapefile includes total PM10 concentrations (µg/m^3) , as well as concentrations by sector (transport, shipping, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>6_AMS_CarbonFootprint_Scenarios</strong><br> file: ech.ma.15-fr4-wp5-carbon-footprint-future-ed3-.pdf<br> Carbon footprint business as usual and scenario projections for Amsterdam</li> <li><strong>3_AMS_Air Quality_Baseline (mesoscale/SourceApportionment)</strong><br> file: ams_psat.xlsx<br> Time series of daily average contributions for each source group for PM10, PM2.5 and NO2 concentrations from WRF-CAMx modelling system with the SA tool, for the Amsterdam urban area.</li> <li><strong>3_AMS_Air Quality Scenarios_urban scale NO2 matrix</strong><br> file: ams_no2_scenarios.mat<br> Annual NO2 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_AMS_Air Quality Scenarios_ urban scale PM10 matrix</strong><br> file: ams_pm10_scenarios.mat<br> Annual PM10 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_AMS_Air Quality Scenarios_urban scale PM2 matrix</strong><br> file: ams_pm2_scenarios.mat<br> Annual PM2.5 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_AMS_Exposure_EU_Baseline NO2 matrix</strong><br> file: ams_no2_exposureeu_baseline.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_AMS_Exposure_EU_Baseline PM10 matrix</strong><br> file: ams_pm10_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_AMS_Exposure_WHO_Baseline PM10 matrix</strong><br> file: ams_pm10_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for the baseline year.</li> <li><strong>4_AMS_Exposure_EU_Baseline PM2 matrix</strong><br> file: ams_pm2_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for the baseline year.</li> <li><strong>4_AMS_Exposure_WHO_Baseline PM2 matrix</strong><br> file: ams_pm2_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for the baseline year.</li> <li><strong>4_AMS_Exposure_EU_Scenarios NO2 matrix</strong><br> file: ams_no2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_AMS_Exposure_EU_Scenarios PM10 matrix</strong><br> file: ams_pm10_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_AMS_Exposure_WHO_Scenarios PM10 matrix</strong><br> file: ams_pm10_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_AMS_Exposure_EU_Scenarios PM2 matrix</strong><br> file: ams_pm2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_AMS_Exposure_WHO_Scenarios PM2 matrix</strong><br> file: ams_pm2_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for BAU, scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> </ul>
d5-6-assessment-of-impacts-ljubljana
<p>Data output from the tool set application for the assessment of the environmental (emissions, carbon footprint, ambient air concentrations), health (exposure and health effects), and economic impacts (e.g. health-related costs).</p> <ul> <li><strong>Ljubljana shapefile</strong><br> file: ljubljana.7z<br> Shapefile with the urban scale domain over Ljubljana with 20 km x 20 km</li> <li><strong>2_LJB_Agriculture_baseline</strong><br> file: claircity_agricultureemissions_ljb_jan2019.pdf<br> Emissions (in kg/year) were based on EMEP emission inventory for agriculture and livestock at 0.1x0.1 degrees resolution (~ 10 km) for the year 2015 disaggregated for the urban domain of Ljubljana by farms, meadows, vineyards land uses classified in the Open Street Map database</li> <li><strong>3_LJB_Air Quality_Baseline (mesoscale/NO2 concentrations)</strong><br> file: no2_2010010100_2010123123_lcc.png<br> Annual NO2 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_LJB_Air Quality_Baseline (mesoscale/PM10 concentrations)</strong><br> file: pm10_2010010100_2010123123_lcc.png<br> Annual PM10 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_LJB_Air Quality_Baseline (mesoscale/PM2.5 concentrations)</strong><br> file: pm2.5_2010010100_2010123123_lcc.png<br> Annual PM2.5 average concentrations (µg/m^3) from WRF-CAMx modelling system, for the mesoscale domain D2.</li> <li><strong>3_LJB_Air Quality_Baseline (urban scale/ NO2 concentrations)</strong><br> file: lju_aq2app_no2.txt<br> Annual NO2 average concentrations from URBAIR model</li> <li><strong>3_LJB_Air Quality_Baseline (urban scale/ PM10 concentrations)</strong><br> file: lju_aq2app_pm10.txt<br> Annual PM10 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_LJB_Air Quality_Baseline (urban scale/ PM2.5 concentrations)</strong><br> file: lju_aq2app_pm2.txt<br> Annual PM2.5 average concentrations from URBAIR model Coordinate system: LCP clicurb (meters)</li> <li><strong>3_LJB_Air Quality_Baseline (mesoscale-report)</strong><br> file: ljb_mesoscale.pdf<br> This report provides an overview of the modelling approach used to characterize the air quality in the Ljubljana region, which includes a detailed description of the air quality modelling system WRF-CAMx (section 1.1.) and a description of the methodology applied to evaluate the model performance (section 1.2.). It also includes results of concentration fields and a source apportionment for NO2, PM10 and PM2.5.</li> <li><strong>6_LJB_Carbon Footprint_Baseline</strong><br> file: ech.ma.15-fr2-wp5-carbon-footprint-ed2.pdf<br> Carbon footprint methodologies and estimation for the baseline year for Ljubljana</li> <li><strong>6_LJB_CarbonFootprint_Scenarios</strong><br> file: ech.ma.15-fr4-wp5-carbon-footprint-future-ed3-.pdf<br> Carbon footprint business as usual and scenario projections for Ljubljana.</li> <li><strong>3_LJB_Air Quality_Baseline (urbanscale-report)</strong><br> file: lju_aq_urbanscale_report.pdf<br> This report provides a brief overview oh the methodology used. It presents an analysis of concentration fields for NO2, PM10, PM2.5 of the total and by modeled sectors, it also includes an analysis of the source contribution and for the maximum values.</li> <li><strong>3_LJB_IRCI_baseline</strong><br> file: ech.ma.15-fr1-wp5-irc-ed5.3.pdf</li> <li><strong>2_LJB_IRCI_Scenarios</strong><br> file: ech.ma.15-fr3-wp5-irc-future-ed5.pdf</li> <li><strong>2_LJB_temporal_profiles</strong><br> file: ljubljana-daily_hourlytd_res_comm_emi.xlsx<br> Temporal profiles of Ljubljana's residential sector and commercial sector scale in %: Daily emissions, typical days emissions and hourly typical days emissions of PM10 and NOX variables.</li> <li><strong>2_LJB_Transport_baseline_map</strong><br> file: roadnetwork_lju.zip<br> Map with lines, link with emissions using filed "ID"</li> <li><strong>2_LJB_Transport_baseline_values</strong><br> file: emission_values_lju.zip<br> Part 2 of 2 files that make the Ljubljana transport emissions baseline: total emissions per link in .csv: To be linked to the road network file using the identifier "uniqueID" shapefile with road links units: g emissions at link level consisting of a zip file with 2 .csv-files, in the following format: first column: link-ID (link with shapefile of the road network) second column: pollutant (PM, PM non-exhaust or NOx) third column: mode ("BESTEL"= van or light freight, "MIDZWVR" = medium freight, "MOTOR" = motorcycles, "OVBUS" = bus, "PERSAUTO" = passenger cars, "ZWAARVR" = heavy freight columns D-AY: hourly intervals for weekday ("WD") and weekend ("WE") all units in g 2 files with values: aggregates over type, by type of day, per hour of day and a separate file for annual totals (at link level, per pollutant (including FC))</li> <li><strong>2_LJB_transport_scenarios</strong><br> file: 191023_lju_scenario_results_summary_v2.xlsx<br> This data-set reflects the relative changes of road transport emissions in different years and scenario's compared to the baseline. 2 sets of scenario's are given, one per tab: "SDW": BAU & scenario's established in the stakeholder dialogue workshop "UPS": updated BAU (if applicable) & final Unified Policy Scenario (UPS) selected in the policy workshop. reported for 3 future years compared to the 2015 baseline: 2025, 2035 and 2050 reported for NOx & PM for 6 modes: "MIDZWR": medium truck "ZWVR": heavy truck "BUS": busses "MOTO": motorcycles "CAR": passenger cars "VAN": light freight, assumed to be a mix of passenger cars and medium trucks all units: %</li> <li><strong>5_LJB_health_statistics </strong><br> file: lbj_health-analysis.xlsx<br> demographics and population data to calculate the health statistics</li> <li><strong>5_LJB_health_scenarios</strong><br> file: summary_results_lbj.xlsx<br> Health-related impacts (selected mortality and morbidity endpoints) related to exposure to PM2.5, NO2, and PM10, considering concentration-response functions and baseline concentrations recommended by WHO.</li> <li><strong>3_LJB_NO2_AQ_latlong</strong><br> file: lju_no2_latlong.rar<br> The shapefile includes total NO2 concentrations (µg/m^3) , as well as concentrations by sector (transport, shipping, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_LJB_PM2_AQ_latlong</strong><br> file: lju_pm2_latlong.rar<br> The shapefile includes total PM2 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_LJB_PM10_AQ_latlong</strong><br> file: lju_pm10_latlong.rar<br> The shapefile includes total PM10 concentrations (µg/m^3) , as well as concentrations by sector (transport, IRCI and industrial). Coordiante system: WGS1984</li> <li><strong>3_LJB_Air Quality_Baseline (mesoscale/SourceApportionment)</strong><br> file: ljb_psat.xlsx<br> Time series of daily average contributions for each source group for PM10, PM2.5 and NO2 concentrations from WRF-CAMx modelling system with the SA tool, for the Ljubljana urban area.</li> <li><strong>3_LJB_Air Quality Scenarios_urban scale NO2 matrix</strong><br> file: lbj_no2_scenarios.mat<br> Annual NO2 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU, scenarios low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_LJB_Air Quality Scenarios_ urban scale PM10 matrix</strong><br> file: lbj_pm10_scenarios.mat<br> Annual PM10 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>3_LJB_Air Quality Scenarios_urban scale PM2 matrix</strong><br> file: lbj_pm2_scenarios.mat<br> Annual PM2.5 average concentrations (µg/m^3) from URBAIR model, considering the impact of all scenarios in all the emission sectors: transport, industrial and IRCI, together with the background concentrations. The file contains X, Y coordinates, together with the total annual average concentrations for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_LJB_Exposure_EU_Baseline NO2 matrix</strong><br> file: lbj_no2_exposureeu_baseline.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_LJB_Exposure_EU_Baseline PM10 matrix</strong><br> file: lbj_pm10_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for the baseline year.</li> <li><strong>4_LJB_Exposure_WHO_Baseline PM10 matrix</strong><br> file: lbj_pm10_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for the baseline year.</li> <li><strong>4_LJB_Exposure_EU_Baseline PM2 matrix</strong><br> file: lbj_pm2_exposureeu_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for the baseline year.</li> <li><strong>4_LJB_Exposure_WHO_Baseline PM2 matrix</strong><br> file: lbj_pm2_exposurewho_baseline.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for the baseline year.</li> <li><strong>4_LJB_Exposure_EU_Scenarios NO2 matrix</strong><br> file: lbj_no2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual NO2 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_LJB_Exposure_EU_Scenarios PM10 matrix</strong><br> file: lbj_pm10_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 40 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_LJB_Exposure_WHO_Scenarios PM10 matrix</strong><br> file: lbj_pm10_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM10 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 20 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_LJB_Exposure_EU_Scenarios PM2 matrix</strong><br> file: lbj_pm2_exposureeu_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the EU annual legal limit value of 25 ug/m^3 for BAU scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> <li><strong>4_LJB_Exposure_WHO_Scenarios PM2 matrix</strong><br> file: lbj_pm2_exposurewho_scenarios.mat<br> Population potentially exposed to the annual PM2.5 average concentrations. The file contains X, Y coordinates, together with the total number of inhabitants, and the total number of inhabitants in each grid cell with an annual concentration exceeding the WHO annual guideline value of 10 ug/m^3 for BAU, scenarios, low and high ambition scenarios from the SDW, as well as the FUPS for the time-window 2025, 2035, and 2050.</li> </ul>
Data for the publication 'The impact of warm and moist air mass perturbations on Arctic mixed-phase stratocumulus'
<p>This repository contains the data for the paper: 'Eirund, G. K., Possner, A. and Lohmann, U.: The impact of warm and moist air mass perturbations on Arctic mixed-phase stratocumulus.', published in J. Climate, 2020 (doi: 10.1175/JCLI-D-20-0163.1.).</p> <p>Each netcdf file contains the data for the respective simulation indicated by the prefix of the filename. Important information on the data are included in the README file.</p> <p> </p>
Data for "Cold surge pathways in East Asia and their tropical impacts"
<p>This repository archives codes for analysis and plot presented in a manuscript submitted to Journal of Climate: "Cold surge pathways in East Asia and their tropical impacts". The codes are written in GrADS and Octave format. </p> <p>The repository also includes a Fortran package for isentropic polar cold air mass diagnosis as in Iwasaki et al. (2014). The package was specifically created by Dr. Y. Kanno.</p>
Global researcher attitudes to societal impact: SDG 1-17
<p>A Jupyter notebook generating summary tables and graphs from the data set. This data is based on the findings of a survey with researchers conducted by Springer Nature in 2019 (View raw data: <a href="https://www.doi.org/10.5281/zenodo.3956548">https://www.doi.org/10.5281/zenodo.3956548</a>). </p>
Data from: Measuring researchers' potential scholarly impact with structural variations: four types of researchers in information science (1979–2018)
We propose a method to measure the potential scholarly impact of researchers based on network structural variations they introduced to the underlying author co-citation network of their field. We applied the method to the information science field based on 91,978 papers published between 1979 and 2018 from the Web of Science. We divided the entire period into eight consecutive intervals and measured structural variation change rates (DM) of individual authors in corresponding author co-citation networks. Four types of researchers are identified in terms of temporal dynamics of their potential scholarly impact—1) Increasing, 2) Decreasing, 3) Sustained, and 4) Transient. The study contributes to the understanding of how researchers' scholarly impact might evolve in a broad context of the corresponding research community. Specifically, this study illustrated a crucial role played by structural variation metrics in measuring and explaining the potential scholarly impact of a researcher. This method based on the structural variation analysis offers a theoretical framework and a practical platform to analyze the potential scholarly impact of researchers and their specific contributions.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.