Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

977

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

977 results for “calculations”

Learn how ShareScore rates datasets ↗
zenodo24/100

HighPGibbs, a Practical Tool for Fluid-Rock Thermodynamic Simulation in Deep Earth and Its Application on Calculating Nitrogen Speciation in Subduction Zone Fluids

<p>This file contains all the species involved in the simulation (Table S1) and the mixing models of solid solutions (Table S2), along with an introduction on how to run HighPGibbs. The details of the simulation can be found in&nbsp;&nbsp;<em>Zhong R. C., Li Y. X., Etschmann B., Brugger J., Yu C., Cui H., 2019. HighPGibbs, a practical tool for fluid-rock thermodynamic simulation in deep earth and its application on calculating nitrogen speciation in subduction zone fluids. Geochemistry, Geophysics, Geosystems, Submitted manuscript</em>.</p>

opencc-by-4.0Sep 2019View details →
zenodo24/100

Inputs to calculate the solvation free energies of ECC ions in SPCE water

<p>Scripts and input files for the calculation of the solvation free energies of selected cations with the ECC model. The simulation box contains one cation and 800 water molecules. The ion topologies are from https://bitbucket.org/hseara/ions. Notably, before comparison with experimental values, the electronic solvation free energy contribution must be added to the result [1], as well as the correction due to the use of neutralizing charge density [2].</p> <p>In each folder, ./run.sh creates the folders representing different lambda values in the free energy perturbation approach and performs the respective calculation in each folder. There are a total of 31 windows (11 for electrostatics and 20 for Lennard-Jones). After running the script, the free energy can be extracted by</p> <p>gmx bar -f ?/md.xvg ??/md.xvg -temp 298 -o -b 100</p> <p>The results are reported in DOI: [ADD]</p> <p>[1] DOI: 10.1021/ct9005807</p> <p>[2] DOI: 10.1080/08927022.2015.1121544</p>

opencc-by-4.0Jun 2020View details →
zenodo24/100

Input parameters, output data, and script to calculate strain and velocity from fault source parameters

<p>This archive contains two data tables, one script, and one dataset to accompany the paper:</p> <p><strong>Strain and velocity across the Great Basin derived from 15-ka fault slip rates: Implications for continuous deformation and seismic hazard in the Walker Lane</strong></p> <p><em>Nadine G. Reitman<sup>1 </sup>&nbsp;and Peter Molnar<sup>1,2</sup></em></p> <p><sup>1</sup>Department of Geological Sciences, University of Colorado Boulder</p> <p><sup>2</sup>Cooperative Institute for Research in Environmental Science (CIRES), University of Colorado Boulder</p> <p>&nbsp;</p> <p>The data tables contain the input source fault parameters (fault strike, dip, rake, length, location, and slip rate) and the contribution to strain calculated for each fault relative to 317 degrees using the associated script. The script uses the methods of Kostrov (1974) and Haines (1982) to calculate strain and velocity across the Great Basin using slip rates reported in the USGS National Seismic Hazard Map (2020 update of the 2014 data, Petersen et al, 2014) and P&eacute;rouse &amp; Wernicke (2017). The script is written in Python3 and requires the user to have some knowledge of how to run Python code. The included dataset (hazfaults_clean.p) contains the data to run the script for the USGS fault sources.&nbsp;</p> <p>Please contact nadine.reitman@colorado.edu with questions.</p>

opencc-by-4.0Jun 2020View details →
zenodo24/100

Inputs for calculating properties of molecular oxygen

<p>In [Javanainen <em>et al., </em><em>J. Phys. Chem. B</em> 2017, 121, 3, 518&ndash;528], we parametrized models for molecular oxygen and benchmarked a number of existing models. Recently, we noticed a mistake in the calculation of heat of vaporization, and thus reparametrized the models [ADD]. The simulation inputs for the performed benchmarks are provided here.</p> <p>The parameters of the new models are provided in the TOP folder. For each model (noQ, QL, QS), the LIQUID folder contains inputs for the simulation of liquid oxygen. The WATER and HEXADECANE folders contain files for the calculation of the energy of solvation into the corresponding phase. The SCRIPTS folder contains scripts for this purpose, and the workflow goes as follows:</p> <ol> <li>./mkdirs (creates directories)</li> <li>./mk_mdp_1 (creates mdp files for the first set of simulations)</li> <li>./mk_md_1 (creates tpr files for the first set of simulations)</li> <li>(run simulations in serial or parallel)</li> <li>repeat 2&amp;3 with &quot;1&quot; replaced by &quot;2&quot; (the second set of simulations)</li> <li>./calc_dgdl_1 &amp; ./calc_dgdl_2 (integrates for the electrostatic and LJ contributions to free energy)</li> </ol> <p>&nbsp;</p>

opencc-by-4.0Jul 2020View details →
zenodo24/100

Calculated similarity matrices for UniqueInchikey dataset

<p>Contains numpy matrices for:</p> <ul> <li>Cosine score - all-vs-all matrix (tolerance=0.005, 12,797 x 12,797 scores)</li> <li>Cosine score - number of matching peaks (12,797 x 12,797 values)</li> <li>Modified cosine score - all-vs-all matrix (tolerance=0.005, 12,797 x 12,797 scores)</li> <li>Modified cosine score - number of matching peaks (12,797 x 12,797 values)</li> <li>&quot;Tanimoto scores&quot; - Jaccard indeces build from rdkit daylight fingerprints (2048bits, 12,797 x 12,797 scores</li> </ul> <p>Notebooks of how those scores are derived can be found here: https://github.com/iomega/spec2vec_gnps_data_analysis/tree/master/notebooks</p>

opencc-by-4.0Aug 2020View details →
zenodo24/100

Data supplement for "Efficient calculation of phase coexistence and phase diagrams: application to a binary phase-field crystal model"

<p>This dataset contains the data and source files for the diagrams of the following publication:</p> <p><em>Holl, M. P., Archer, A.J., &amp; Thiele, U.<br> Efficient calculation of phase coexistence and phase diagrams: application to a binary phase-field crystal model<br> arXiv preprint </em><br> <a href="https://arxiv.org/abs/2009.02946">arXiv:2009.02946</a><em>, 2020 </em></p> <p>We provide the data and sources necessary to generate figures 10-14 of the manuscript.</p> <p>Additionally we provide the MATLAB codes to run all the continuations for the results in sections 4.2 and 5.&nbsp;</p> <p>For more information, please see the included README.md</p>

opencc-by-4.0Nov 2020View details →
dryad24/100

Data from: Correct calculation of CO2 efflux using a closed-chamber linked to a non-dispersive infrared gas analyzer

1. Improved understanding of the carbon (C) cycle is essential to model future climates and how this may feedback to affect greenhouse-gas fluxes. 2 .We summarize previous work quantifying respiration rates of organic substrates and briefly discuss how advances in technology, specifically the use of chambers linked to a non-dispersive infra-red gas analyzer (NDIR), can be applied to assess carbon dynamics from short-term field measurements. This technology hastens measurement and is relatively inexpensive, enabling researchers to increase replication and investigate temporal and spatial variation. 3. We describe the theory behind calculations of CO2 efflux released through organic substrates, when using a closed-chamber linked to a NDIR. These methods can in principle be extended to any chamber-based measurement of gas fluxes, including partially closed chambers as used for soil surface CO2, nitrous oxide or methane effluxes and stem CO2 respiration, although additional assumptions may apply. 4. We show that incorrect application of formulae in some earlier studies resulted in either under- or over-estimation of CO2 effluxes. Of the studies we reviewed measuring the respiration of woody debris, leaf-litter, or woody stems using closed chambers linked to a NDIR, only 22% (11 of 51) provided the equations used to calculate CO2 efflux, and 72% (8 of 11) of those provided contained basic errors. Using our data on the decomposition of woody debris as an example, we found that such mistakes resulted in anywhere from 8% underestimation to 22% overestimation of CO2 efflux. The errors varied among studies and hence may limit understanding of the factors affecting emissions of CO2 and our ability to incorporate this knowledge into global carbon models. 5. We provide formulae for the correct calculation of respiration rates in future studies using closed-chambers and thus provide a basis for comparative studies of factors affecting CO2 efflux from woody debris, leaf litter and other substrates. Ultimately this will contribute to improved parameterization of forest respiration.

opencc-zeroDec 2014View details →
dryad24/100

Data from: First-principles calculations of structural, electronic, magnetic and elastic properties of Mo2FeB2 under high pressure

The structural and electronic density of states, magnetic, and elastic properties of Mo2FeB2 under high pressure have been investigated with first principles calculations. Furthermore, the thermal dynamic properties of Mo2FeB2 were also studied with the quasiharmonic Debye model. The volume of Mo2FeB2 decreases with the increasing pressure. Using the analysis of the density of the states, atom population and Mulliken overlap population, it is observed that as the pressure increases, the B-B bonds are strengthened, and the B-Mo covalency decreases. Moreover, for all pressures, Mo2FeB2 is detected in the antiferromagnetic phase and the magnetic moments decrease with the increasing pressure. The calculated bulk modulus, shear modulus, Young's modulus, Poisson's ratio and universal anisotropy index all increase with the increasing pressure. From thermal expansion coefficient analysis, it is found that Mo2FeB2 shows good volume invariance under high pressure and temperature. The examination of the dependence of heat capacity on the temperature and pressure shows that heat capacity is more sensitive to temperature than to pressure

opencc-zeroDec 2017View details →
zenodo24/100

Results of ab initio (DFT) calculations of fullerenes

<p>This is the collection of input and output files of ground state DFT calculations of fullerenes. They were carried out using Quantum Espresso. These calculations correspond to the article <i>Electron-vibrational renormalization in fullerenes through ab initio and machine learning methods, by Pablo Garcıa-Risueno, Eva Armengol, Angel Garcıa-Cerdana, David Carrasco-Busturia and Juan Marıa Garcıa-Lastra. </i>The results make it possible to calculate renormalisations of electronic eigenvalues due to electron-vibrational (electron-phonon) interaction using the frozen-phonon method.</p>

restrictedcc-by-4.0Nov 2023View details →
zenodo24/100

LI 850 sensor data of the Antarctic Modeling Observation System (ATMOS) project of the 40th Brazilian Antarctic Operation (OPERANTAR XL) to calculate the CO2 flux (FCO2)

<p>LI 850 sensor data of the Antarctic Modeling Observation System (ATMOS) project of the 40th Brazilian Antarctic Operation (OPERANTAR XL) to calculate the CO2 flux (FCO2)</p>

opencc-by-4.0Mar 2024View details →
zenodo24/100

Dataset Of Diagnosing Medical Score Calculator Apps Paper

<p>Dataset Of Diagnosing Medical Score Calculator Apps Paper</p>

opencc-by-4.0Mar 2022View details →
zenodo24/100

Dataset: Calculation of pCO2 based on chemical variables

<p>The dataset contains the supplementary data generated and analyzed in the manuscript &ldquo;Long term trends in pCO2 in lake surface water following rebrowning&rdquo; by Couturier et al. The dataset includes 1) chemical variables (water temperature, pCO2, DIC, pH and Alkalinity) needed to estimate pCO2, &nbsp;2) estimated pCO2 with different corrections &nbsp;(i.e., pH and organic alkalinity) and pairs parameters (i.e. DIC/pH and Alk/pH). The data were collected in 70 lakes (some repeatedly) located in Ontario, Canada in 2018 and 2019.</p>

opencc-by-4.0Apr 2022View details →
dryad24/100

Data from: Development of the Combined Assessment of Risk Encountered in Surgery (CARES) surgical risk calculator for prediction of post-surgical mortality and need for intensive care unit admission risk – a single-centre retrospective study

[No abstract entered]

opencc-zeroDec 2017View details →
zenodo24/100

Interval-based Verification for Medical Scores and Score Calculator Apps

<p>Dataset Of&nbsp;Interval-based Verification for Medical Scores and Score Calculator Apps</p>

opencc-by-4.0Mar 2022View details →
zenodo24/100

Data for clear-air turbulence calculated from high-resolution radiosonde observations at cruising altitudes in China during the period from 2010 to 2022.

<p>The file is the turbulence dissipation rate(&epsilon;) data, calculated using high-resolution radiosonde measurements at cruising altitudes in China, during the period from 2010 to 2022. More description &nbsp;can be seen in the read me.txt.</p>

opencc-by-4.0Jul 2024View details →
zenodo24/100

Electronic structure fingerprints of nickel-cobalt-manganese oxide from x-ray spectroscopy and high-throughput ab initio calculations

<p>AiiDA archives of the calculations presented in the paper "Electronic structure fingerprints of nickel-cobalt-manganese oxide from x-ray spectroscopy and high-throughput <em>ab initio</em> calculations".</p> <p>&nbsp;</p> <ul> <li>structures_and_general_info.aiida: The "EnumlibCalcJob" to generate the structural candidates, the resulting initial structures and AiiDA "Dict" nodes containing the mapping of the different steps (via their corresponding <em>uuid</em>) to each structure.</li> <li>pre_optimization.aiida: The relevant calculations to perform the pre-relaxation.</li> <li>optimization.aiida: The relevant calculations to perform the final structural optimization.</li> <li>electronic_structure.aiida: The bandstructure and DOS/PDOS calculations. All preliminary calculations such as SCF and NSCF calculations to obtain the eigenvalues are included as well.</li> </ul> <p>Finally, the Pandas DataFrame containing the PDOS for each site of all the structures (resolved into orbital and spin contributions) which builds the foundation for the presented analysis is stored in the `pickle` format in `pdos_all.pckl`.</p>

opencc-by-4.0Jul 2024View details →
zenodo24/100

Geometries for "Reduced Scaling Correlated Natural Transition Orbitals for Multilevel Coupled Cluster Calculations"

<p>Formaldehyde, formaldehyde-in-water, and azobenzene dye geometries used in "Reduced Scaling Correlated Natural Transition Orbitals for Multilevel Coupled Cluster Calculations" in xyz-format.</p>

opencc-by-4.0Jul 2024View details →
zenodo24/100

Free and defect-bound (bi)polarons in LiNbO3: Atomic structure and spectroscopic signatures from ab initio calculations

<p>Dataset of the publication &ldquo;Free and defect-bound (bi)polarons in LiNbO<sub>3</sub>: Atomic structure and spectroscopic signatures from ab initio calculations&ldquo;, F. Schmidt, A. L. Kozub, T. Biktagirov, C. Eigner, C. Silberhorn, A. Schindlmayr, W. G. Schmidt, and U. Gerstmann, Physical Review Research 2, 043002 (2020) ( <a href="https://doi.org/10.1103/PhysRevResearch.2.043002">https://doi.org/10.1103/PhysRevResearch.2.043002</a> ). The tar file includes the data on which the plots shown in figures 2, 3, 4, 6, 7, 8, and 9 are based.</p>

opencc-by-4.0Sep 2020View details →
zenodo24/100

Comparison of Radiative Transfer schemes for the calculation of aerosol radiative forcing in Mars' atmosphere 2.0

<p>Data-sets of figures (1 to 10) for the Comparison of radiative transfer schemes for the calculation of aerosol radiative forcing in the atmosphere of Mars. (Revision: 2)</p>

opencc-by-4.0Sep 2021View details →
zenodo24/100

LCA Data and Calculations for Abrasive Waterjet Cutting and Water Droplet Machining

<p>This is a dataset used to support the paper titled &quot;Life Cycle Environmental and Economic Comparison of Water Droplet Machining and Traditional Abrasive Waterjet Cutting&quot;.</p>

opencc-by-4.0Oct 2021View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.