Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
9,302
datasets available to search
ShareScore release 0.9.0
Dataset results
9,302 results for “DETECT”
Extra deep sequencing of GL261 and LLC1 murine cell lines for the purpose of fusion detection
GEO Series GSE97975. Mus musculus. 2 samples. Type: Expression profiling by high throughput sequencing.
MAPCap enables high-resolution detection and differential expression analysis of transcription start sites
GEO Series GSE125831. Mus musculus; Drosophila melanogaster. 34 samples. Type: Expression profiling by high throughput sequencing.
Segmentation-based detection of allelic imbalance and LOH in cancer cells using whole genome SNP arrays
GEO Series GSE11976. Homo sapiens. 20 samples. Type: Genome variation profiling by SNP array.
Rapid Electrochemical Detection and Identification of Microbiological and Chemical Contaminants for Manned Spaceflight Project
<p>A great deal of effort has gone into the development of point-of-use methods to meet the challenge of rapid bacterial identification for both environmental monitoring and clinical applications.&nbsp; Unfortunately, most of the methods developed rely on Preliminary Chain Reaction (PCR) and face inherent limitations because of the requirement for enzymatic components and thermal control.&nbsp; Other methods based on surface plasmon resonance, quartz crystal microbalance, and fluorescence has been reported with good detection limits, but, these methods are immunological and cannot provide genetic-level information.&nbsp; Further, they require labeled markers, complicated fluid handling systems, and sensitive optics that drive up cost and complexity and preclude them from outside the laboratory.&nbsp; Recent work by a group at the University of Toronto has focused on developing an electrochemical platform that combines ultrasensitive detection, straightforward sample processing, and inexpensive components to create a cost-effective, user-friendly device for detection and identification of microorganisms.&nbsp; The platform combines an electrical cell lysis chamber, and electrochemical reporter system, and nanostructured microelectrodes (NMEs) to detect specific nucleic acid sequences.&nbsp; The nucleic acid sequences are unique to a given type of microorganism and can be used to identify the microorganisms present in a sample.</p><p>From the perspective of the anticipated prototype device &nbsp;(Lam, et al. 2012. <em>Polymerase Chain Reaction-Free, Sample-to-Answer Bacterial Detection in 30 Minutes with Integrated Cell Lysis</em>. Anal. Chem. <strong>84(1)</strong>: 21-5), detection of microbial contaminants will begin with a lysis chamber designed to release DNA and RNA from microorganisms present in the sample using ultrasonic or electrochemical technology.&nbsp; The DNA and RNA mixture is then passed into an analysis chamber containing an array of nanostructured microelectrodes (NMEs).&nbsp; The surface of the NMEs will be functionalized with probe molecules for DNA or RNA sequences specific to the bacteria being targeted.&nbsp; Binding of the DNA or RNA to the appropriate detection probe on the NME surface in the presence of an electrochemical reporter system will change the electrochemical properties of the NMEs.&nbsp; A potentiostat is used to measure the current at each individual electrode before and after addition of the DNA and RNA mixture.&nbsp; The difference in current before and after addition of the mixture to the NMEs is compared against a pre-determined threshold to check for the presence of target bacteria in the sample.&nbsp; The process for detection of chemical contaminants is very similar.&nbsp; The lysis chamber would be bypassed and the sample would flow directly into the analysis chamber.&nbsp; The NMEs will be functionalized with molecules to selectively bind the desired targets (analytes) and the change in the electrochemical response of each NME can again be used to detect and quantify the contaminants.&nbsp; Depending on the analyte of interest, it may be possible to directly measure analyte binding on the surface of the NMEs without the use of an electrochemical reporter system. The overall project will focus on optimization of the individual aspects of the detection platform in preparation for construction of a prototype for a flight experiment.&nbsp; The scope of the work in this proposal is limited to characterization and optimization of the lysis step/sample preparation, probe selection, and NME structure.&nbsp; Lysis conditions will be optimized by evaluating parameters associated with the oscillation frequency and lysis time for ultrasonic techniques and applied voltage for the electrochemical techniques.&nbsp; Cell viability, as determined by fluorescent detection of DNA or R
Anomaly Detection for Complex Systems
In performance maintenance in large, complex systems, sensor information from sub-components tends to be readily available, and can be used to make predictions about the system's health and diagnose possible anomalies. However, existing methods can only use predictions of individual component anomalies to guess at systemic problems, not accurately estimate the magnitude of the problem, nor prescribe good solutions. Since physical complex systems usually have well-defined semantics of operation, we here propose using anomaly detection techniques drawn from data mining in conjunction with an automated theorem prover working on a domain-specific knowledge base to perform systemic anomalydetection on complex systems. For clarity of presentation, the remaining content of this submission is presented compactly in Fig 1.
Solving a prisoner's dilemma in distributed anomaly detection
Anomaly detection has recently become an important problem in many industrial and financial applications. In several instances, the data to be analyzed for possible anomalies is located at multiple sites and cannot be merged due to practical constraints such as bandwidth limitations and proprietary concerns. At the same time, the size of data sets affects prediction quality in almost all data mining applications. In such circumstances, distributed data mining algorithms may be used to extract information from multiple data sites in order to make better predictions. In the absence of theoretical guarantees, however, the degree to which data decentralization affects the performance of these algorithms is not known, which reduces the data providing participants' incentive to cooperate.This creates a metaphorical 'prisoners' dilemma' in the context of data mining. In this work, we propose a novel general framework for distributed anomaly detection with theoretical performance guarantees. Our algorithmic approach combines existing anomaly detection procedures with a novel method for computing global statistics using local sufficient statistics. We show that the performance of such a distributed approach is indistinguishable from that of a centralized instantiation of the same anomaly detection algorithm, a condition that we call zero information loss. We further report experimental results on synthetic as well as real-world data to demonstrate the viability of our approach. The remaining content of this presentation is presented in Fig. 1.
Early Detection of Overheating Polytetrafluoroethylene Insulated Wires Project
<p>The objective of the proposed work is to develop a rapid time response diagnostic using a suite of instruments for the detection of heated&nbsp;polytetrafluoroethylene (PTFE) insulated wires based on chemicals and particles generated at relatively low temperatures. &nbsp;The anticipated result of the proposed effort is the development of a conceptual design for an early warning system that can specifically detect the overheating of&nbsp;polytetrafluoroethylene (PTFE) insulated wires. This design can be utilized as a subsystem integrated into a fully capable fire detection system.</p>
Using Decision Trees to Detect and Isolate Leaks in the J-2X
**Full title: Using Decision Trees to Detect and Isolate Simulated Leaks in the J-2X Rocket Engine** Mark Schwabacher, NASA Ames Research Center Robert Aguilar, Pratt & Whitney Rocketdyne Fernando Figueroa, NASA Stennis Space Center **Abstract** The goal of this work was to use data-driven methods to automatically detect and isolate faults in the J-2X rocket engine. It was decided to use decision trees, since they tend to be easier to interpret than other data-driven methods. The decision tree algorithm automatically “learns” a decision tree by performing a search through the space of possible decision trees to find one that fits the training data. The particular decision tree algorithm used is known as C4.5. Simulated J-2X data from a high-fidelity simulator developed at Pratt & Whitney Rocketdyne and known as the Detailed Real-Time Model (DRTM) was used to “train” and test the decision tree. Fifty-six DRTM simulations were performed for this purpose, with different leak sizes, different leak locations, and different times of leak onset. To make the simulations as realistic as possible, they included simulated sensor noise, and included a gradual degradation in both fuel and oxidizer turbine efficiency. A decision tree was trained using 11 of these simulations, and tested using the remaining 45 simulations. In the training phase, the C4.5 algorithm was provided with labeled examples of data from nominal operation and data including leaks in each leak location. From the data, it “learned” a decision tree that can classify unseen data as having no leak or having a leak in one of the five leak locations. In the test phase, the decision tree produced very low false alarm rates and low missed detection rates on the unseen data. It had very good fault isolation rates for three of the five simulated leak locations, but it tended to confuse the remaining two locations, perhaps because a large leak at one of these two locations can look very similar to a small leak at the other location. **Introduction** The J-2X rocket engine will be tested on Test Stand A-1 at NASA Stennis Space Center (SSC) in Mississippi. A team including people from SSC, NASA Ames Research Center (ARC), and Pratt & Whitney Rocketdyne (PWR) is developing a prototype end-to-end integrated systems health management (ISHM) system that will be used to monitor the test stand and the engine while the engine is on the test stand[1]. The prototype will use several different methods for detecting and diagnosing faults in the test stand and the engine, including rule-based, model-based, and data-driven approaches. SSC is currently using the G2 tool [http://www.gensym.com](http://www.gensym.com) to develop rule-based and model-based fault detection and diagnosis capabilities for the A-1 test stand. This paper describes preliminary results in applying the data-driven approach to detecting and diagnosing faults in the J-2X engine. The conventional approach to detecting and diagnosing faults in complex engineered systems such as rocket engines and test stands is to use large numbers of human experts. Test controllers watch the data in near-real time during each engine test. Engineers study the data after each test. These experts are aided by limit checks that signal when a particular variable goes outside of a predetermined range. The conventional approach is very labor intensive. Also, humans may not be able to recognize faults that involve the relationships among large numbers of variables. Further, some potential faults could happen too quickly for humans to detect them and react before they become catastrophic. Automated fault detection and diagnosis is therefore needed. One approach to automation is to encode human knowledge into rules or models. Another approach is use data-driven methods to automatically learn models from historical data or simulated data. Our prototype will combine the data-driven approach with the model-based and rule-based appro
JPSS-1 CrIS Level 1B Principal Component Analysis / Rapid Event Detection V3.0 (SNDRJ1CrISL1BPCARED) at GES DISC
This sample data collection contains L1B radiance values that are compressed and denoised via Principal Component Analysis (PCA). Additionally it contains a new Rapid Event Detection (RED) product, which for multiple spectral regions identify where rare signals are observed, providing an efficient and useful way to locate and study interesting phenomena. Some of the potential uses for these RED components are the detection of atmospheric gases where fires and volcanoes occur. PCA/RED might be a desirable alternative to the existing L1B product because (1) it is many times smaller in data volume, (2) about 80% of the random noise is removed, and (3) it comes with the new RED component. The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also know as NOAA-20 (National Oceanic and Atmospheric Administration).
A 2-Micron Pulsed Laser Transmitter for Direct Detection Column CO2 Measurement from Space Project
<p> Develop a compact, efficient 2&micro;m pulsed laser for a lidar instrument to make accurate, high-resolution atmospheric CO2 column measurements in support of the ASCENDS mission.<br /> Develop a pulsed 2&micro;m laser that is based on a Thulium fiber-laser pumped Holmium (Ho) solid state laser in a Master Oscillator Power Amplifier (MOPA) configuration.<br /> Demonstrate 65mJ at 50Hz needed for the space&nbsp; Integrated Path Differential Absorption (IPDA) instrument in a robust prototype format.</p>
LIGHTNING DETECTION AND RANGING (LDAR) RAW DATA V1
Lightning Detection and Ranging (LDAR) Raw data consists of level 1 lightning data collected from February 25, 1997 through June 11, 2008. The LDR system is located at the Kennedy Space Center. The center latitude and longitude of the LDAR network is 28.5387 and -80.6428. All x, y, and z values represent distance (in meters) from this location. LDAR is a volumetric lightning mapping system providing near real-time location of lightning in support of Space Shuttle operations. These data are in ASCII format.
Supporting Shellfish Aquaculture in the Chesapeake Bay using Artificial Intelligence to Detect Poor Water Quality through Field Sampling and Remote Sensing
We are collecting and analyzing biological, chemical, and physical variables in and above the water at target sites and in the lab, looking for hyperspectral proxies that covarying with pollutants. This project is applying an AI model to address water quality, using datasets collected around the Bay in combination with remotely sensed data during targeted field work to support the need to more effectively sort through disparate data sets to identify areas of poor water quality that result in shellfish bed closure.
Supporting Shellfish Aquaculture in the Chesapeake Bay using Artificial Intelligence to Detect Poor Water Quality through Sampling and Remote Sensing
This use-inspired NASA AIST project collects biological, chemical, and physical variables in and above the water at Chesapeake Bay sites for analysis within the lab. These ground-truth data are then used for data labeling, in combination with remotely sensed data, within a machine learning model trained to identify water quality challenges of resource managers that could result in shellfish bed closures, for example.
Spermatozoal mRNA is reproducibly detected in purified D. melanogaster sperm.
GEO Series GSE33947. Drosophila melanogaster. 10 samples. Type: Expression profiling by array.
TMEFF2 isoform detection in LNCaP prostate cancer cells
GEO Series GSE165248. Homo sapiens. 1 samples. Type: Expression profiling by high throughput sequencing.
Human Pegivirus detected in a patient with severe encephalititis using a metagenomic pan-virus array
GEO Series GSE67021. Homo sapiens; synthetic construct. 2 samples. Type: Other.
Glycolytic metabolism of pathogenic T cells enables early detection of GvHD by 13C-MRI
GEO Series GSE147371. Mus musculus. 4 samples. Type: Expression profiling by high throughput sequencing.
Molecular Biomarker Signature for Bladder Cancer Detection
GEO Series GSE31189. Homo sapiens. 92 samples. Type: Expression profiling by array.
Detection of genes differentially expressed in radioresistant and radiosensitive tumors before and after irradiation
GEO Series GSE9713. Homo sapiens. 18 samples. Type: Expression profiling by array.
Multiple Salivary Biomarkers for Early Detection of Pancreatic Cancer
GEO Series GSE14245. Homo sapiens. 24 samples. Type: Expression profiling by array.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.