Find research datasets worth reusing

IHW COMET HALLEY REDUCED SPECTROSCOPIC OBSERVATIONS V1.0

NASA's International Halley Watch (IHW) has created a Comet Halley Archive. The collection of data spans the full wavelength range as submitted by scientists to the IHW. The observations belong to one of the following Disciplines: Amateur, Astrometry, Infrared Studies, Large-Scale Phenomena, Meteor Studies, Near-Nucleus Studies, Photometry and Polarimetry, Radio Studies, and Spectroscopy and Spectrophotometry. The data collected by these nine disciplines were augmented by Spacecraft measurements. The data were submitted to IHW, but the evaluation and selection for the Archive has been the primary responsibility of the Discipline Specialist Teams for each network in cooperation with the Lead Center. The Spectroscopy and Spectrophotometry Network collected 2732 files of data which were classified as 'reduced', which means that at least wavelength is calibrated and in some cases flux as well. Some data on non-Halley targets for the spectroscopic observations can be grouped according to 'laboratory' calibration, dark, bias, flatfield, sky, and photometric standards. In the first category, a large number of 'arcs' and 'lamps' were used as follows: HE-NE, TH-AR, NE-AR, CU-AR, CU-NE, Thorium, Tungsten, Quartz, and Rubidium. For the 'sky' observers used the twilight, moonlight, and blank sky. The most common 'photometric' standards were stars, but observers also included other comets (Hartley-Goode), asteroids (Ceres), reflection nebulae (R8), and emission nebulae (NGC1982, NGC7000). A list of these stellar calibration targets follows: HD 140283, HD 184711, HD89688, HD102870, HD120086, HD13974, HD219188, HD 25680, HD 19445, HD18803, HD30455, HD26912, SAO 1280, HZ15, CD-22 7696, GD 190, GC5106, GC2188, GC2192, G19113213, G 99-37, L745-46A, Feige 15, Feige 56, Landolt 98, Landolt 92, Van Beuren, RHO ORION, CHI 1 ORION, 29 PI LEO. These data consisted of both one and two dimensional data covering the date range from 1984 December 23 through 1988 February 17.

IRAM 30-m Single-Dish Telescope Observation Log

This table contains the IRAM 30-m single-dish telescope observation log. The Institut de Radio Astronomie Millimetrique (IRAM) was founded in 1979 and is operated as a French-German-Spanish collaboration. Its partner institutes are the CNRS (Centre National de la Recherche Scientifique, France), the MPG (Max Planck Gesellschaft, Germany), and the IGN (Instituto Geografico Nacional, Spain). The principal activity of IRAM is the study of cold matter (molecular gas and dust) in the solar system, in our Galaxy, and out to cosmological distances, in order to determine its composition, density, mass, temperature, and kinematics. IRAM operates two observatories at millimeter wavelengths which are open to the international astronomical community: the 30-m single-dish telescope on Pico Veleta (2850 m), Spain, and the six-antenna interferometer on the Plateau de Bure (2550 m) in France. Both sites are at high altitude to reduce the absorption by water vapor. The observatories are supported by the IRAM offices and laboratories in Granada and Grenoble. The observation log included here concerns the 30-m single-dish telescope, and summarizes the observations made there since September 30, 2009. The observation log for the the six-antenna interferometer on the Plateau de Bure in France is also available as the HEASARC database table <a href="/W3Browse/ground-based/irampdblog.html">IRAMPDBLOG</a>, and the observation log for NOEMA (the NOrthern Extended Millimeter Array), the successor to the Plateau de Bure observatory, is available as the HEASARC database table <a href="/W3Browse/ground-based/iramnoelog.html">IRAMNOELOG</a>. For more information on IRAM, see <a href="http://www.iram-institute.org/">the IRAM home page</a>. This table was originally ingested by the HEASARC in January 2011. It is based on the CDS table B/iram/, files 30m.dat and 30m_pi.dat. It was last updated in September 2020, based on an updated version of these tables which were also obtained from the CDS. This is a service provided by NASA HEASARC .

USGS Global Forest Observations Initiative (GFOI) Bangladesh

The Global Forest Observations Initiative (GFOI) is an initiative of the inter-governmental Group on Earth Observations (GEO) that aims to: foster the sustained availability of observations for national forest monitoring systems; support governments that are establishing national systems by providing a platform for coordinating observations, providing assistance and guidance on utilizing observations, developing accepted methods and protocols, and promoting ongoing research and development; and work with national governments that report into international forest assessments (such as the global Forest Resources Assessment (FRA) of the Food and Agriculture Organization, FAO) and the national greenhouse gas inventories reported to the UN Framework Convention on Climate Change (UNFCCC) using methods of the Intergovernmental Panel on Climate Change (IPCC).

Swift/UVOT Serendipitous Source Catalog, v1.1: Observations IDs

The first version of the Swift UVOT Serendipitous Source Catalog (UVOTSSC) provides positions and magnitudes, as well as errors and upper limits of confirmed sources, for observations taken from the start of operations in 2005 until October 1st of 2010. The first version of the UVOTSSC has been produced by processing the image data obtained from the Swift Ultraviolet and Optical Telescope (UVOT). The data processing was performed at the Mullard Space Science Laboratory (MSSL, University College London, U.K.) using Swift FTOOLS from NASA's High Energy Astrophysics Software package (HEASoft-6.11), with some customizing of the UVOT packages in order to get more complete source detection and to properly apply quality flags to those sources that were detected within the UVOT image artifacts. The total number of observations with 17'x17' images used for version 1 of the catalog is 23,059, giving 6,200,016 sources in total, of which 2,027,265 have multiple entries in the source table because they have been detected in more than one observation. Some sources were only observed in one filter. The total number of entries in the source table is 13,860,568. The S/N ratio for all sources exceeds 5 in at least one UVOT filter, the rest of the filters having a S/N greater than 3. One Swift ObsID can consist of one or more images, which for this catalog have been summed, yielding the quoted total exposure times. The original UVOT images can be found in the on-line archives at MAST, and in the Swift archives at <a href="http://swift.ac.uk/">http://swift.ac.uk/</a> and at the HEASARC (<a href="http://heasarc.gsfc.nasa.gov/W3Browse/all/swiftmastr.html">http://heasarc.gsfc.nasa.gov/W3Browse/all/swiftmastr.html</a>), using the ObsID as the search key. For higher temporal resolution, the original images need to be used because the catalog data herein are summed over all of the individual images within an ObsID. The upper limits per filter for the summed images are constructed for each ObsID because the sensitivity hardly varies over the detector. Usually the images within one ObsID share the same pointing, however, whereas the quoted upper limits always apply for sources near the pointing direction given, if the images had small offsets in pointing they may not apply to sources near the edge of the summed image, which is typically about 8 arcminutes from the quoted pointing direction. U, B, V, UVW2, UVM2 and UVW1 refer to the filter bandpasses defined in the UVOT Filterwheel section of the MSSL documentation at <a href="http://www.mssl.ucl.ac.uk/www_astro/uvot/uvot_instrument/filterwheel/filterwheel.html">http://www.mssl.ucl.ac.uk/www_astro/uvot/uvot_instrument/filterwheel/filterwheel.html</a>. This HEASARC table contains version 1.1 of the Swift UVOT table of observations in which the sources in the source table were detected and contains the details of 23,059 Swift UVOT observations. The HEASARC has changed the names of many of the parameters from those given in the original table. In such cases, we have listed the original names in parentheses at the end of the parameter descriptions given below. There is a related table which lists the 13,860,568 source detections that is available at the HEASARC as the SWUVOTSSC table. This table was created by the HEASARC in May 2017 based upon the <a href="https://cdsarc.cds.unistra.fr/ftp/cats/II/339">CDS Catalog II/339</a> file summary.dat. This is a service provided by NASA HEASARC .

TES/Aura L2 Carbon Monoxide Nadir Special Observation V007

TL2CONS_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Carbon Monoxide Nadir Special Observation Version 7 data product. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.” A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these sets. Thus, each limb standard product consisted of three swath objects, one for each observation, Limb

TES/Aura L2 Formic Acid Nadir Special Observation V007

TL2FORNS_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Formic Acid Nadir Special Observation Version 7 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.” A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these se

USGS Global Forest Observations Initiative (GFOI) Thailand

MAGDALENA RIDGE OBSERVATORY 2.4M PHOTDOC LCROSS OBSERVATIONS

This archive contains raw observations of the 2009-10-09 impact of the LCROSS spacecraft on the moon by the PHOTDOC instrument on the Magdalena Ridge Observatory 2.4m telescope. This dataset consists of frame-transfer CCD observations of the LCROSS impact site as well as unresolved images of the primary impactor in the final hours before impact.

THe Observing-system Research and predictability experiment ER2 MODIS Airborne Simmulator

THORPEX_ER2_MAS data are THe Observing-system Research and Predictability EXperiment (THORPEX) ER_2 MODIS Airborne Simulator (MAS) Data in HDF covering Hawaii and the Pacific Ocean.THe Observing-system Research and predictability experiment (THORpex) is a ten-year international research program where the primary objective is to accelerate improvements in short range weather predictions and warnings over the Northern Hemisphere. The fifth in an ongoing series of ER-2 field experiments, THORpex is the primary over-water validation experiment for the GIFTS (Geosynchronous Imaging Fourier Transform Spectrometer) satellite. The MODIS Airborne Simulator (MAS) is an airborne scanning spectrometer that acquires high spatial resolution imagery of cloud and surface features from its vantage point on-board a NASA ER-2 high-altitude research aircraft. The MAS spectrometer acquires high spatial resolution imagery in the range of 0.55 to 14.3 microns. A total of 50 spectral bands are available in this range. A 50-channel digitizer which records all 50 spectral bands at 12 bit resolution became operational in January 1995. The MAS spectrometer is mated to a scanner sub-assembly which collects image data with an IFOV of 2.5 mrad, giving a ground resolution of 50 meters from 20000 meters altitude, and a cross track scan width of 85.92 degrees.

EUVE Archive and Observation Log

This catalog of the EUVE Science Archive has been constructed based on information provided by personnel of the Center for Extreme-Ultraviolet Astrophysics (CEA), and is made available in the current EUVEMASTER database table. Most of the information in the catalog is also in the headers of the FITS files. The HEASARC now has nearly all of the 1378 pointed EUVE Deep Survey/Spectrometer (DS/S) datasets that were processed by CEA until its closing in March 2001. There are a small number of observations that were made in the year 2000 for which the HEASARC does not currently have the corresponding datasets. Notice that this catalog does not contain entries corresponding to EUVE observations in scan mode or where the files received by the HEASARC were not of the normal image or events type. This is the 7th (and possibly final) version of the EUVEMASTER database, last updated in June 2001. This catalog has been constructed based on information provided by staff members of the Center for Extreme-Ultraviolet Astrophysics (CEA) in Berkeley, CA, whose help is gratefully acknowledged. This is a service provided by NASA HEASARC .

Catalog of Infrared Observations (CIO), Edition 5

The Fifth Edition of the Catalog of Infrared Observations (CIO) comprises a summary of infrared astronomical observations published in the scientific literature from 1965 through 1997 in the wavelength range 1 micrometer (= 1 micron = 1 um) to 1 millimeter (= 1 mm). This catalog contains infrared observational data for sources outside the Solar System, constructed through a search of the most active scientific journals, IR surveys and catalogs. To date, about 6200 journal articles and 10 major survey catalogs have been included in the database from which this catalog was constructed. The catalog in its original form contains 374,653 individual observations of about 62,000 different infrared sources. More than 8000 of these sources are identifiable with visible objects. For sources with no published IR source position, a nominal position may have been given based on other sources. Nominal positions are usually the best available, but not necessarily the true IR positions. The HEASARC has removed 1136 of the 374,653 entries in the catalog in its original form for which there was no positional information, leaving 373,517 remaining entries in this HEASARC-realized version. The 1136 entries that were removed are listed in the file: <a href="https://heasarc.gsfc.nasa.gov/FTP/heasarc/dbase/misc_files/infrared/deleted_entries.txt">https://heasarc.gsfc.nasa.gov/FTP/heasarc/dbase/misc_files/infrared/deleted_entries.txt</a> In addition to the main catalog, the creators of CIO also generated other files, e.g., bibliographical files, an index file, etc., which are available via the web (in the form of gzipped ASCII files) in the directory: <a href="https://heasarc.gsfc.nasa.gov/FTP/heasarc/dbase/misc_files/infrared/">https://heasarc.gsfc.nasa.gov/FTP/heasarc/dbase/misc_files/infrared/</a>. The bibliographical files (refauth.data.gz refchron.dat.gz, and refs.dat.gz) link observations in the catalog with references to the original articles published in the literature (these references give the standard information plus the full titles). The Index of Infrared Source Positions is contained in the file names.dat.gz and is ordered alphabetically by source name: for sources with no published IR source position, a nominal position (usually the best available, but not necessarily the true IR position) may have been given based on other sources. Nominal position references are indicated in the index. This version of the 5th Edition of the Catalog of Infrared Observations was created by the HEASARC in April 2001 based on ADC/<a href="https://cdsarc.cds.unistra.fr/ftp/cats/II/225">CDS catalog <II/225></a>. Duplicate entries were removed in June 2019. This is a service provided by NASA HEASARC .

Sentinel-3B OLCI Level-2 Regional Earth-observation Full Resolution (EFR) Ocean Color (OC) - Near Realtime Data, version R2022.0

The Ocean Biology DAAC produces near real-time (quicklook) products using the best-available combination of ancillary data from meteorological and ozone data. As such, the inputs and the calibration used are less than optimal. Quicklook products provide a snapshot of the data during a short time period within a single orbit.

Monterey Ocean Observing System (MOOS) Upper-water-column Science Experiment (MUSE)

Measurements made near Monterey Bay under the MOOS Upper-water-column Science Experiment (MUSE).

Sentinel-3B OLCI Earth-observation Reduced Resolution (ERR) Data, version 1

The Ocean and Land Colour Instrument (OLCI) is the successor to ENVISAT's Medium Resolution Imaging Spectrometer (MERIS) having additional spectral channels, different camera arrangements and simplified on-board processing. The OLCI is a push-broom instrument with five camera modules sharing the field of view. The field of view of the five cameras is arranged in a fan-shaped configuration in the vertical plane, perpendicular to the platform velocity. Each camera has an individual field of view of 14.2° and a 0.6° overlap with its neighbors. The whole field of view is shifted across track by 12.6 degrees away from the sun to minimize the impact of sun glint. OLCI is equipped with on-board calibration hardware based on sun diffusers. There are three sun diffusers--two 'white' diffusers dedicated to radiometric calibration and one dedicated to spectral calibration, with spectral reflectance features. The native resolution is approximately 300m, referred to as Full Resolution(FR). A Reduced Resolution (RR) processing mode provides Level-1B data at sampling rates decreased by a factor of four in both spatial dimensions resulting to resolution of approximately 1.2 km.

COSMOS Field VLBA Observations 1.4-GHz Source Catalog

This table contains the results of a project using wide-field Very Long Baseline Interferometry (VLBI) observations at 1.4 GHz of 2,865 known radio sources in the Cosmic Evolution Survey (COSMOS) field, a field which has exceptional multi-wavelength coverage. The main objective of this study is to identify the active galactic nuclei (AGN) in this field. Wide-field VLBI observations were made of all known radio sources in the COSMOS field at 1.4 GHz using the Very Long Baseline Array (VLBA). The authors also collected complementary multiwavelength information from the literature for the VLBA-detected sources.The combination of the number of sources, sensitivity, angular resolution and the area covered by this project are unprecedented. A catalog which contains the VLBI-detected sources is presented, the main purpose of which is to be used as an AGN catalog. the complementary multiwavelength (optical, infrared and X-ray) information of the VLBI-detected sources is also presented. The authors have detected 468 radio sources, expected to be AGN, with the VLBA. This is, to date, the largest sample assembled of VLBI-detected sources in the sub-mJy regime. They find a detection fraction of 20% +/- 1%, considering only those sources from the input catalog which were in principle detectable with the VLBA (2,361). As a function of the VLA flux density, the detection fraction is higher for higher flux densities, since at high flux densities a source could be detected even if the VLBI core accounts for a small percentage of the total flux density. As a function of redshift, the authors see no evolution of the detection fraction over the redshift range 0.5 < z < 3. In addition, they find that faint radio sources typically have a greater fraction of their radio luminosity in a compact core: ~70% of the sub-mJy sources detected with the VLBA have more than half of their total radio luminosity in a VLBI-scale component, whereas this is true for only ~30% of the sources that are brighter than 10 mJy. This suggests that fainter radio sources differ intrinsically from brighter ones. Across the entire sample, the authors find the predominant morphological classification of the host galaxies of the VLBA-detected sources to be early type (57%), although this varies with redshift and at z > 1.5 they find that spiral galaxies become the most prevalent (48%). The number of detections is high enough to study the faint radio population with statistically significant numbers. The authors demonstrate that wide-field VLBI observations, together with new calibration methods such as multi-source self-calibration and mosaicking, result in information which is difficult or impossible to obtain otherwise. This table contains 504 entries, including the 468 VLBA-detected sources and, for sources with multiple components, entries for the individual components. Among the detected sources, there are 452 single, 13 double, 2 triple and 1 quadruple source. Source entries have no suffix in their vlba_source_id, e.g., 'C3293', whereas component entries have a, b, c or d suffixes, e.g., 'C0090a' (and a value of 2 for the multi_cpt_flag parameter). This table was created by the HEASARC in December 2017 based on <a href="https://cdsarc.cds.unistra.fr/ftp/cats/J/A+A/607/A132">CDS Catalog J/A+A/607/A132</a> files vlba_cat.dat and vlba_mw.dat. This is a service provided by NASA HEASARC .

MSX LUNAR ECLIPSE OBSERVATION V1.0

The Midcourse Space Experiment (MSX) lunar eclipse observation on September 27, 1996 resulted in six 4.3 micron brightness temperature maps of the moon. In addition, qualitative observations were made at 8.3 microns.

HST WIDE FIELD PLANETARY CAMERA 2 OBSERVATIONS OF MARS

The Hubble Space Telescope Wide Field Planetary Camera 2 data archive contains calibrated data of Mars observed between April 27, 1999 and September 4, 2001. These are full-disk images of Mars obtained primarily through narrowband filters and in the wavelength interval of 255 to 1042 nm. The data have been calibrated to radiance factor, or I/F.

CGRO/OSSE Observations

This database table is based on the set of OSSE observation data products available at the HEASARC. The Oriented Scintillation Spectrometer Experiment (OSSE) is one of four experiments on NASA's Compton Gamma Ray Observatory (CGRO) satellite. OSSE was designed to undertake comprehensive gamma-ray observations of astrophysical sources in the 0.05-10 MeV energy range. The instrument also had secondary capabilities for gamma-ray and neutron observations above 10 MeV that are of particular value for solar flare studies. This database table was last updated in August 2005. Some duplicate entries in the table were removed in June 2019. The data in this table was supplied by the CGRO Science Support Center. This is a service provided by NASA HEASARC .

USGS Global Forest Observations Initiative (GFOI) REPUBLIC OF THE CONGO

TES/Aura L2 Methanol Nadir Special Observation V007

TL2MTLNS_7 is the Tropospheric Emission Spectrometer (TES)/Aura Level 2 Methanol Nadir Special Observation Version 7 data product. It consists of information for one molecular species for an entire Global Survey or Special Observation. TES was an instrument aboard NASA's Aura satellite and was launched from California on July 15, 2004. Data collection for TES is complete. TES Level 2 data contain retrieved species (or temperature) profiles at the observation targets and the estimated errors. The geolocation, quality, and other data (e.g., surface characteristics for nadir observations) were also provided. L2 modeled spectra were evaluated using radiative transfer modeling algorithms. The process, referred to as retrieval, compared observed spectra to the modeled spectra and iteratively updated the atmospheric parameters. L2 standard product files included information for one molecular species (or temperature) for an entire global survey or special observation run. A global survey consisted of a maximum of 16 consecutive orbits. Nadir observations, which point directly to the surface of the Earth, are different from limb observations, which are pointed at various off-nadir angles into the atmosphere. Nadir and limb observations were added to separate L2 files, and a single ancillary file was composed of data that are common to both nadir and limb files. A Nadir sequence within the TES Global Survey was a fixed number of observations within an orbit for a Global Survey. Prior to April 24, 2005, it consisted of two low resolution scans over the same ground locations. After April 24, 2005, Global Survey data consisted of three low resolution scans. The Nadir standard product consists of four files, where each file is composed of the Global Survey Nadir observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Nadir observations only used a single set of filter mix. A Global Survey consisted of observations along 16 consecutive orbits at the start of a two day cycle, over which 4,608 retrievals were performed. Each observation was the input for retrievals of species Volume Mixing Ratios (VMRs), temperature profiles, surface temperature, and other data parameters with associated pressure levels, precision, total error, vertical resolution, total column density, and other diagnostic quantities. Each TES Level 2 standard product reported information in a swath format conforming to the HDF-EOS Aura File Format Guidelines. Each Swath object was bounded by the number of observations in a global survey and a predefined set of pressure levels, representing slices through the atmosphere. Each standard product could have had a variable number of observations depending upon the Global Survey configuration and whether averaging was employed. Also, missing or bad retrievals were not reported. Further, observations were occasionally scheduled on non-global survey days. In general they were measurements made for validation purposes or with highly focused science objectives. Those non-global survey measurements were referred to as “special observations.” A Limb sequence within the TES Global Survey was three high-resolution scans over the same limb locations. The Limb standard product consists of four files, where each file is composed of the Global Survey Limb observations from one of four focal planes for a single orbit, i.e. 72 orbit sequences. The Global Survey Limb observations used a repeating sequence of filter wheel positions. Special Observations could only be scheduled during the 9 or 10 orbit gaps in the Global Surveys, and were conducted in any of three basic modes: stare, transect, step-and-stare. The mode used depended on the science requirement. Each limb observation Limb 1, Limb 2 and Limb 3, were processed independently. Thus, each limb standard product consisted of three sets where each set consisted of 1,152 observations. For TES, the swath object represented one of these sets.