Find research datasets worth reusing

TROPESS CrIS-JPSS1 L2 Peroxyacetyl Nitrate for Forward Stream, Summary Product V1 (TRPSYL2PANCRS1FS) at GES DISC

The TROPESS CrIS-JPSS1 L2 Peroxyacetyl Nitrate for Forward Stream, Summary Product contains the vertical distribution of the retrieved atmospheric state of peroxyacetyl nitrate (PAN), and formal uncertainties measured by the CrIS instrument on the JPSS-1 (NOAA-20) satellite. The forward stream standard product is global for the time period from 2021-04-01 to present. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 16 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

TROPESS CrIS-SNPP L2 for Beijing Megacity, Summary Product V1 (TRPSYL2ALLCRSMGBEI) at GES DISC

The TROPESS CrIS-SNPP L2 for Beijing Megacity, Summary Product contains the vertical distribution of six retrieved atmospheric gases (CH4, CO, HDO, NH3, O3 and PAN), along with formal uncertainties measured by the CrIS instrument on the Suomi-NPP satellite. This summary product is one of the TROPESS Special Collections, centered on a 3x3 degree region over Beijing for the time period from 2016-01-02 to 2021-05-21. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 17 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

TROPESS CrIS-SNPP L2 Carbon Monoxide for West Coast Fires HiRes, Standard Product V1 (TRPSDL2COCRSWCFHI) at GES DISC

The TROPESS CrIS-SNPP L2 Carbon Monoxide for West Coast Fires HiRes, Standard Product contains the vertical distribution of the retrieved atmospheric state of carbon monoxide (CO), formal uncertainties, and diagnostic information measured by the CrIS instrument on the Suomi-NPP satellite. This product focuses on the CONUS region (20N-60N; 150W-40W) for the time period from 2020-08-01 to 2020-10-31, during the outbreak of U.S. West Coast wildfires. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 14 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

TROPESS CrIS-JPSS1 L2 Carbon Monoxide for Forward Stream, Summary Product V1 (TRPSYL2COCRS1FS) at GES DISC

The TROPESS CrIS-JPSS1 L2 Carbon Monoxide for Forward Stream, Summary Product contains the vertical distribution of the retrieved atmospheric state of carbon monoxide (CO), and formal uncertainties measured by the CrIS instrument on the JPSS-1 (NOAA-20) satellite. The forward stream standard product is global for the time period from 2021-04-01 to present. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 14 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

TROPESS CrIS-SNPP L2 Deuterated Water Vapor for Forward Stream, Standard Product V1 (TRPSDL2HDOCRSFS) at GES DISC

The TROPESS CrIS-SNPP L2 Deuterated Water Vapor for Forward Stream, Standard Product contains the vertical distribution of the retrieved atmospheric state of semi-heavy water (HDO), formal uncertainties, and diagnostic information measured by the CrIS instrument on the Suomi-NPP satellite. The forward stream standard product is global for the time period from 2021-02-01 to 2021-05-21, when the CrIS-SNPP processing was discontinued. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 17 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

TROPESS CrIS-SNPP L2 Carbon Monoxide for West Coast Fires, Standard Product V1 (TRPSDL2COCRSWCF) at GES DISC

The TROPESS CrIS-SNPP L2 Carbon Monoxide for West Coast Fires, Standard Product contains the vertical distribution of the retrieved atmospheric state of carbon monoxide (CO), formal uncertainties, and diagnostic information measured by the CrIS instrument on the Suomi-NPP satellite. This product focuses on the CONUS region (20N-60N; 150W-40W) for the time period from 2020-08-01 to 2020-10-31, during the outbreak of U.S. West Coast wildfires. The NASA TRopospheric Ozone and Precursors from Earth System Sounding (TROPESS) project, uses an optimal estimation algorithm, known as the MUlti-SpEctra, MUlti-SpEcies, Multi-SEnsors (MUSES).The data files are written in the netCDF version 4 file format, and each file contains one day of data. The data have a spatial resolution of 14 km (CrIS nadir FOV), and are reported at 14 vertical levels from the surface to 0.1 hPa. The principal investigator for the TROPESS project is Kevin W. Bowman.

opencc-by-4.0Aug 2020View details →

zenodo28/100

The National CRIS in the Czech Republic and its information exchange with funder and institutional CRISs

<p>A diagram that illustrates the role of the national Current Research Information System (CRIS) in the country of Czechia and some of the information flows that keep it updated.</p>

Cross-track Infrared Sounder (CrIS) Level 2 Earth System Science Profiling Algorithm Ammonia Retrieval Algorithm (ESSPA-NH3) V1 (SNDRSNIL2ESPNH3)

The objective of this limited edition data collection is to examine the ammonia products generated by the ESSPA (Earth System Science Profiling Algorithm) algorithm from the Cross-track Infrared Sounder (CrIS) instruments. The CrIS instrument used for this product is deployed on board the Suomi National Polar-orbiting Partnership (SNPP) platform and uses the Normal Spectral Resolution (NSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 1305 NSR infrared sounding channels covering the longwave (655-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2155-2550 cm-1) spectral regions.The NH3 L2 ammonia algorithm is based on an AER (Atmospheric and Environmental Research, Inc.) program initially developed to process TES (Tropospheric Emissions Spectrometer) trace gas products. This version runs within the ESSPA software framework: it uses the AER OSS forward model and an optimal estimation approach with a Levenberg-Marquardt algorithm. Temperature and water profiles are obtained from the CLIMCAPS Field of Regard (FOR) products, as are initial guesses for surface temperature and emissivity. The algorithm consists of a two-step sequential retrieval the first step retrieves surface temperature and emissivity and the second step an ammonia profile. The algorithm produces ammonia retrievals on every field of view (FOV) in each FOR.A level 2 granule has been set as 6 minutes of data, 30 footprints crosstrack by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.

Sounder SIPS: JPSS-1 CrIS Level 3 Comprehensive Quality Control Gridded Monthly CLIMCAPS V2 (SNDRJ1IML3CMCCP) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This monthly one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Comprehensive QC accepts a retrieval if the profile is good to the surface and ensures consistent analysis across all levels and variables.

Sounder SIPS: JPSS-1 CrIS Level 2 CLIMCAPS: Atmosphere cloud and surface geophysical state V2 (SNDRJ1IML2CCPRET) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products. A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.

S-NPP CrIS IMG: Collocated VIIRS level 1 / cloud mask statistical summary V2 (SNDRSNCrISL1BIMG) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Normal Spectral Resolution (NSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Suomi National Polar-orbiting Partnership Project (SNPP). In December 2014, the CrIS instrument on the SNPP satellite doubled the spectral resolution of shortwave infrared data being transmitted to the ground. In November 2015, additional points were included at the ends of the longwave and shortwave interferograms to improve the quality of the calibration. Prior to November 2, 2015 the data are only available in Normal Spectral Resolution, after November 2, 2015 at 16:06 UTC, the data are available in both NSR and Full Spectral Resolution (FSR). The NSR files have 1,317 channels: 163 shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 437 midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.The Visible Infrared Imaging Radiometer Suite (VIIRS) has 22 imaging and radiometric bands covering wavelengths from 0.41 to 12.5 microns. It provides the sensor data records for clouds, sea surface temperature, ocean color, and others. This IMG product primarily contains statistics of the VIIRS cloud mask and VIIRS L1B data within each CrIS footprint..

Suomi NPP CrIS Level 1B Full Spectral Resolution V3 (SNPPCrISL1B) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Suomi National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (SNPP). In December 2014, the CrIS instrument on the SNPP satellite doubled the spectral resolution of shortwave infrared data being transmitted to the ground. In November 2015, additional points were included at the ends of the longwave and shortwave interferograms to improve the quality of the calibration. Prior to November 2, 2015 the data are only available in Normal Spectral Resolution (NSR), after November 2, 2015 at 16:06 UTC, the data are available in both NSR and Full Spectral Resolution. The FSR files have 2,223 channels: 637 shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 869 midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.Version 3 of this product contain improvements to the L1B calibration, geolocation, quality monitoring, and metadata. Additional information can be found in the NASA Cross Track Infrared Sounder (CrIS) Level 1B Product Users’ Guide.CrIS is designed to be used with the ATMS (Advanced Technology Microwave Sounder) instrument. Processing the data from both of these instruments together is referred to as CrIMSS (Cross-Track Infrared and Microwave Sounder Suite).If you were redirected to this page from a DOI from an older version, the "Version History" tab will provide additional information about older versions of this product. Please contact the GES DISC user support if you need additional information.

JPSS-1 CrIS IMG_COL: Array indices for collocated VIIRS observations V2 (SNDRJ1CrISL1BIMGC) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also know as NOAA-20 (National Oceanic and Atmospheric Administration). The JPSS-1 mission with CrIS instrumentation is a follow-on to the Suomi National Polar-orbiting Partnership (SNPP) mission. The CrIS instrumentation and data processing system is nearly identical to that of the SNPP satellite. The FSR files have 2,223 channels (*2211 apodized channels): 637 (*633) shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 869 (*865) midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 (*713)longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.The Visible Infrared Imaging Radiometer Suite (VIIRS) has 22 imaging and radiometric bands covering wavelengths from 0.41 to 12.5 microns. It provides the sensor data records for clouds, sea surface temperature, ocean color, and others. This IMG_COL product contains the colocation indices of the VIIRS pixels within each CrIS footprint.

JPSS1 CrIS-VIIRS 750-m Matchup Indexes V1 (J1_CrIS_VIIRS750m_IND) at GES_DISC

This dataset includes JPSS-1 VIIRS-CrIS collocation index product, within the framework of the Multidecadal Satellite Record of Water Vapor, Temperature, and Clouds (PI: Eric Fetzer) funded by NASA’s Making Earth System Data Records for Use in Research Environments (MEaSUREs) Program, 2017. The dataset is built upon work by Wang et al. (doi: 10.3390/rs8010076) and Yue (doi:10.5194/amt-15-2099-2022).The short name for this collections is J1_CrIS_VIIRS750m_IND_1

Sounder SIPS: JPSS-1 CrIS Level 2 CLIMCAPS: Cloud Cleared Radiances V2 (SNDRJ1IML2CCPCCR) at GES DISC

The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. Cloud clearing is the process of computing the clear column radiance for a given channel n, and represents what the channel would have observed if the entire scene were cloud free. The entire scene is defined as the ATMS field of regard (FOR) which includes and array of 3x3 CrIS field of views (FOV). The basic assumption of cloud-clearing is that if the observed radiances in each field-of-view are different, the differences in the observed radiances are solely attributed to the differences in the fractional cloudiness in each field of view while everything else (surface properties and atmospheric state) is uniform across the field of regard. A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.

Suomi NPP CrIS Level 1B Normal Spectral Resolution V3 (SNPPCrISL1BNSR) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Normal Spectral Resolution (NSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Suomi National Polar-orbiting Partnership Project (SNPP). In December 2014, the CrIS instrument on the SNPP satellite doubled the spectral resolution of shortwave infrared data being transmitted to the ground. In November 2015, additional points were included at the ends of the longwave and shortwave interferograms to improve the quality of the calibration. Prior to November 2, 2015 the data are only available in Normal Spectral Resolution, after November 2, 2015 at 16:06 UTC, the data are available in both NSR and Full Spectral Resolution (FSR). The NSR files have 1,317 channels: 163 shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 437 midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.Version 3 of this product contain improvements to the L1B calibration, geolocation, quality monitoring, and metadata. Additional information can be found in the NASA Cross Track Infrared Sounder (CrIS) Level 1B Product Users’ Guide.CrIS is designed to be used with the ATMS (Advanced Technology Microwave Sounder) instrument. Processing the data from both of these instruments together is referred to as CrIMSS (Cross-Track Infrared and Microwave Sounder Suite).If you were redirected to this page from a DOI from an older version, the "Version History" tab will provide additional content including information about v3 of this product. Please contact the GES DISC user support if you need additional information.

JPSS-1 CrIS IMG: Collocated VIIRS level 1 / cloud mask statistical summary V2 (SNDRJ1CrISL1BIMG) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also know as NOAA-20 (National Oceanic and Atmospheric Administration). The JPSS-1 mission with CrIS instrumentation is a follow-on to the Suomi National Polar-orbiting Partnership (SNPP) mission. The CrIS instrumentation and data processing system is nearly identical to that of the SNPP satellite. /The FSR files have 2,223 channels (*2211 apodized channels): 637 (*633) shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 869 (*865) midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 (*713)longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.The Visible Infrared Imaging Radiometer Suite (VIIRS) has 22 imaging and radiometric bands covering wavelengths from 0.41 to 12.5 microns. It provides the sensor data records for clouds, sea surface temperature, ocean color, and others. This IMG product primarily contains statistics of the VIIRS cloud mask and VIIRS L1B data within each CrIS footprint.

JPSS-1 CrIS Level 1B Full Spectral Resolution V2 (SNDRJ1CrISL1B) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also know as NOAA-20 (National Oceanic and Atmospheric Administration). The JPSS-1 mission with CrIS instrumentation is a follow-on to the Suomi National Polar-orbiting Partnership (SNPP) mission. The CrIS instrumentation and data processing system is nearly identical to that of the SNPP satellite. CrIS is designed to be used with the ATMS (Advanced Technology Microwave Sounder) instrument. Processing the data from both of these instruments together is referred to as CrIMSS (Cross-Track Infrared and Microwave Sounder Suite).The FSR files have 2,223 channels (*2211 apodized channels): 637 (*633) shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 869 (*865) midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 (*713)longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries.If you were redirected to this page from a DOI from an older version, please note this is the current version of the product. Please contact the GES DISC user support if you need information about previous data collections.

Sounder SIPS: JPSS-1 CrIS Level 3 Comprehensive Quality Control Gridded Daily CLIMCAPS V2 (SNDRJ1IML3CDCCP) at GES DISC

WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the NOAA-20 platform, also known as JPSS-1. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR (Full Spectral Resolution) infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2100-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz. The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid. This daily one degree latitude by one degree longitude level-3 product starts with level-2 retrieval products with QC values of 0 (best), 1 (good), and 2 (don't use) which are provided for each variable. Comprehensive QC accepts a retrieval if the profile is good to the surface and ensures consistent analysis across all levels and variables.

JPSS-1 CrIS Level 1B Full Spectral Resolution V3 (SNDRJ1CrISL1B) at GES DISC

The Cross-track Infrared Sounder (CrIS) Level 1B Full Spectral Resolution (FSR) data files contain radiance measurements along with ancillary spacecraft, instrument, and geolocation data of the CrIS instrument on the Joint Polar Satellite System-1 (JPSS-1) platform. This platform is also know as NOAA-20 (National Oceanic and Atmospheric Administration). The JPSS-1 mission with CrIS instrumentation is a follow-on to the Suomi National Polar-orbiting Partnership (SNPP) mission. The CrIS instrumentation and data processing system is nearly identical to that of the SNPP satellite. The FSR files have 2,223 channels (*2211 apodized channels): 637 (*633) shortwave channels from 3.9 to 4.7 microns (2555 to 2150 cm-1), 869 (*865) midwave channels from 5.7 to 8.05 microns (1752.5 to 1242.5 cm-1), and 717 (*713)longwave channels from 9.1 to 15.41 microns (1096.25 to 648.75 cm-1). Each CrIS field-of-regard (FOR) contains 9 field-of-views (FOVs) arranged in a 3X3 array. The Level 1B files contain 30 FORs in the cross track direction and 45 in the along track direction. Data products are constructed on six minute boundaries. CrIS is designed to be used with the ATMS (Advanced Technology Microwave Sounder) instrument. Processing the data from both of these instruments together is referred to as CrIMSS (Cross-Track Infrared and Microwave Sounder Suite).Version 3 of this product contain improvements to the L1B calibration, geolocation, quality monitoring, and metadata. Additional information can be found in the NASA Cross Track Infrared Sounder (CrIS) Level 1B Product Users’ Guide.If you were redirected to this page from a DOI from an older version, please note this is the current version of the product. Please contact the GES DISC user support if you need information about previous data collections.